How to make Aluminum Guide Rail for your Circular Saw. Направляющая шина.
ฝัง
- เผยแพร่เมื่อ 6 ม.ค. 2016
- Guide Rail or Track Saw. $300 for all materials, $100 used saw from local Pawn Shop.
Smoothly riding, high precision cutting, weather resistant, shiny aluminum rail. The maximum depth of cut 1-9/16" (40 mm).
How to use the guide rail hire: • Track Saw, Circular Sa...
Track Saw Build from:
EXTRUDED ALUMINUM RECTANGLE TUBE 6061T6 2" x 5" x 0.25" - 110" www.onlinemetals.com/merchant...
Aluminum Angle 1.25" x 1.25" x 0.25" 6061T6 - 108" www.onlinemetals.com/merchant...
Polyethylene (Cutting Boards HDPE) find at TAP Plastics www.tapplastics.com/about/loc...
1/2 x 6-1/2 x 12" and 1/4 x 2 x 12"
#10-24 screws www.homedepot.com/p/Crown-Bolt... washers and nylon lock nuts:
Everbilt
#10-24 Coarse Zinc-Plated Steel Lock Nut (100 per Pack) www.homedepot.com/p/Everbilt-1...
Diablo Blade:
The first blade a used special for aluminum cutting work, you can see it at 0:30 minutes:
www.homedepot.com/p/Diablo-7-...
At 8:23 minutes of the video after I finish rail construction I changed Aluminum Blade for a regular 60 teeth Ultra Finish blade for wood material and all wood work cutting:
www.homedepot.com/p/Diablo-7-...
Any of this model can be attached:
Worm drive hand saw / 7-1/4" Worm Drive Circular Saw, 15-Amp
Bosch CSW41 www.homedepot.com/p/Bosch-15-A...
Bosch 1677M
Bosch SPT77WML-22
Skilsaw SPT77WM-22 www.homedepot.com/p/SKILSAW-15...
DeWalt DWS535Twww.homedepot.com/p/DEWALT-15-...
Makita 5377MG www.homedepot.com/p/Makita-15-...
Milwaukee 6477-20 www.amazon.com/Milwaukee-6477...
The best if you use the "Magnesium Worm Drive" saw.
6 brands TRACK SAW price hire:
Makita 194367-7 Guide Rail 118 In. www.toolnut.com/makita-194367-...
Makita SP6000J1 6-1/2-Inch Plunge Circular Saw with Guide Rail. www.amazon.com/Makita-SP6000J...
Festool TS 55 REQ www.amazon.com/Festool-TS-REQ...
Festool 491498 55" Guide Rail FS 1400 (1400mm) www.amazon.com/Festool-491498...
DEWALT DWS520K 6-1/2-Inch TrackSaw. www.amazon.com/DEWALT-DWS520K...
DEWALT DWS5022 59-Inch TrackSaw Track. www.amazon.com/DEWALT-DWS5022...
Grizzly T25552 - Track Saw Master Pack. www.grizzly.com/products/Track...
Grizzly T24872 - 55" Guide Rail for T10687. www.grizzly.com/products/55-Gu...
Mafell MT 55 Cc Track Saw without Rail. www.toolnut.com/mafell-mt-55-c...
Triton TTS1400. www.amazon.com/Triton-TTS1400...
Triton TTST1500 59-Inch Track. www.amazon.com/Triton-TTST150...
Алюминиевая направляющая. Для пилы, ручной циркулярки. Сделана из распиленной вдоль квадратной трубы. Алюминиевого уголка. Подошва из фторопласта. Можно любого типа пластик , легко скользящий по алюминию.
#howto, #diy,
Homemade Track Saw
Carril de guía de aluminio
دليل ألومنيوم للسكك الحديدية
Rail de guidage en aluminium
Aluminium Führungsschiene
Ράγα οδηγού αλουμινίου
アルミガイドレール
Trilho de guia de alumínio
एल्यूमिनियम गाइड रेल
آلومینیوم راهنمای راه آهن
รางอลูมิเนียมคู่มือ
ايلومينيم گائيڊ ريل
אַלומינום גייד רייל
Track Saw
Steel Cutting Machine in Action Now
My NEW project is done! You may be interested in the Shower Pan Rebuild:
Shower Pan Rebuild. PART 1- th-cam.com/video/NdhPWNkK66o/w-d-xo.html
Cut tile from bottom of the shower. PART 2 - th-cam.com/video/NNBwQVA1LwY/w-d-xo.html
How to Pre-Slope Shower Pan with Beadex. PART 3 - th-cam.com/video/prp_vglYv4c/w-d-xo.html
How to install ABS Shower Drain. PART 4 - th-cam.com/video/v57eQe-eC4w/w-d-xo.html
Shower Pan Liner to ABS Shower Drain. PART 5 - th-cam.com/video/9c9xxkL0Am4/w-d-xo.html
Shower liner and Concrete shower base. PART 6 - th-cam.com/video/LSbB_ml0UtE/w-d-xo.html
RedGard Waterproofing Membrane. PART 7 - th-cam.com/video/e_4Wzgtxic0/w-d-xo.html
Install a Pebble Tile / River Rock Shower Floor. PART 8 - th-cam.com/video/m9Zb81AMSI8/w-d-xo.html
How to make a simple Jig to cut 45-degree tile edges - th-cam.com/video/nzSYCPHPmRg/w-d-xo.html
How to tile Shower Curb with 45 degree outer corners. PART 9 - th-cam.com/video/wdOxYGWcFSk/w-d-xo.html
How to 45 degree tile cut. No Jig, just hand - th-cam.com/video/9WmOIYn1QL4/w-d-xo.html
Footstep in shower. PART 10 - th-cam.com/video/2YrMN22kz2k/w-d-xo.html
Shower Curb, Wall grout & Glass Door Base installation. PART 11 - th-cam.com/video/L0Ms7sEOEWM/w-d-xo.html
How to Silicone a Shower. PART 12 - th-cam.com/video/Edb9fXIdkRk/w-d-xo.html
Schluter, custom size tile edge. Last 13th PART - th-cam.com/video/kT9hc3D00ec/w-d-xo.html
Best guide rail for circular saw ever, not a crap from festool or makita, that can’t t even be clamped unless you use proprietary track saw.
Thank you!
Well done Fix it All. Accurate cuts made easy. Thank You for posting this.
Overkill or not, this is an excellent video in terms of explaining the concept and realisation.
you are a craftsman for sure. I would love to build something similar, just need some aluminum!
One of the coolest tutorials on any subject.
Absolutely mesmerizing to watch....thanks for the nine minutes and fifty three seconds of pure bliss.
Thank you so much !
A skillful mind at work is a beautiful thing!
The most professional job I've seen on this topic
Best DIY guide rail I've seen so far. It's inspiring me to make one like that.
Thank you.
Mr. light up your music, you've just made every woodworker's dream come true, I know it's easy to do but you make it look like it's a snap, God bless you and tnx for sharing it with the world
+Emmanuel Lopez Thank you!
One of the best DIY Tracksaw Design on the net. Very neat, tidy crisp and clean work. Cheers from Michael. Australia.
Thank you very much!
Nice , at first I was befuddled why you cut the aluminum to have different depths , but then it cleared up..
Nice work, considering track saws are very expensive I applaud your ingenuity.
Thank you.
Best home made track saw that I have seen on TH-cam. Nice work
Both the video and the project were done very well. I'm not usually a fan of videos without narration but you did a great job without speaking.
Tank you !
Gee I bet mum loved all of that saw dust going into her wagon....lol. Great job thanks for posting.
Excellent design and exacting fabrication. Very impressed.
you have some serious talent
Of course, this can be done easier, from plywood or other cheap materials or scrap.
But:
1) I need it for work out side of my shop.
2) Only build like a tank can work for me in many-many years.
3) Rain, snow or humidity... FORGET IT !!! - my rail always straight, flat and smooth.
4) Never worry about damage when I transporting it in my van.
Fix it All
Is going 1/8" instead of 1/4" will make it less strong or durable? Giving new depth of 1 11/16".
@@cesarrodriguez9597 can I answer your question?
the thinner rail of course is weaker
I imagine the likeliest place to get damaged is in the van or truck loaded with the rest of the tools. especially if you hire help.
if it worps kinks and hence useless buy then you have to have to have money spared for a new one (or about any other tool) so you can keep working
if you are a hobbyst you may find out during following years you "never really need it" or "I loaned it to a nephew two years ago and I don't really want it back..." so go with a cheaper one and the money you save will be little but with that money buy your loved one something in that price range you see fit as a sign of affection.
логично...
And it will last many generations. Great job.
Genius! I would have lost my patience long ago.
I had no idea what he was doing half of the time but it was fun to watch.
Great video of how you made your guide rail.
If you could just include a splinter-guard strip on the underside of the rail as well as some friction strips to prevent any movement as well as a t-track for clamps if necessary and maybe some some track stops would be good, as well as a method for joining rails together, then had a splinter-guard on the saw this would be a bit like the Festool if it could make really accurate perfectly splinter free cuts that don't even need sanding.
ishortland zaa0
Well done video, thank you.
Reminds me of that heavy Makita bevel saw in shop that nobody uses..You put yours to use well..I would coat that aluminum track with silicone or teflon spray or something..Good work..
Polyethylene slides very well on aluminum. All kind of spray will stick to much dust on rail.
More way how and where to use it:
th-cam.com/video/01CZuUfplxs/w-d-xo.html
th-cam.com/video/oHEx0PK9Cfk/w-d-xo.htmlm13s
th-cam.com/video/Xv3FaN8Sn2Y/w-d-xo.htmlm31s
th-cam.com/video/AnoC7uJWYOU/w-d-xo.html
th-cam.com/video/yDCsUjGhNLc/w-d-xo.html
The way you work is amazing ... if I could be like you, surely I could easily cut and cut things like boards and plywood
Thank you!
Very clever, sir! Kudos for posting this.
Espectacular!. Muchas gracias por compartir su video.
Me alegro que te haya gustado.
Хорошая конструкция , приятно посмотреть на работу
Спасибо!
es la guía más inteligente que e visto y soy maestro carpintero con 22 años de experiencia felicidades
Gracias.
Be mindful of your ears and noise protection..very nice build
pardon
Awesome . Thank you for this idea.
absolutely genius...thanks for posting this
Thank you.
well done, very creative. Thanks for sharing
Heavy, strong, great quality, should last forever. I wish they sold heavy aluminum extrusions like that at Lowes.
Thank you.
well done....very handy to use. Thanks for sharing
Kevin Khan Thanks!
Thanks for the precision woodworking.
Thank you!
Classy job, good video.
great work
Very nicely done sir. Love it and love the idea of having one like that made by me over store bought. Good job.
Thank you!
Fix it All you had my attention at 45 sec when you was ripping that aluminium rail. as the video went I realised I'm watching a true craftsman! you have blown me away. thumbs up
big hello from Bosnia
Thank you !!!
If you got more time than money this is a great idea. If you're like me, this build would probably take as much time as working to earn enough and BUY a track saw.
Absolutely agree with you.
Thank you .. this may look simple but real genius .. top quality work and truely inspirational ...
A Teo Thank you!
Great Job. I have a Ryobi BT3000 also.
Congratulations, it's amazing, fantastic, it's great.
Thanks!
How does something like this get so many negative points? This is home-made and will give professionally made track-saw guides a good run for the money. What I get from this video: 1) There's always someone coming up with something that rivals expensive items sold in the store. 2) The initial ad-lib methods (blocks of wood) he used to rip the aluminium tube. Thank you for sharing the idea!
LosoIAm Thank you so much !!!
Thank you, Sir. You're a great inspiration to me - a week-end DIY worrier :)
this is robust and by far better quality than the expensive flimsy looking and awkward ones you see in the store.
Why not use your table saw when cutting the initial aluminum tube?
FANTASTIC VIDEO!!!! Subscribed.
There seems to be a small gap between the edge of the rail and the edge of the blade. If you glue a strip of rubber mat or similar on the underside and then make a cut the edge of the rubber strip will be perfectly aligned with the edge of the blade and will make alignment of the rail to the markings on the workpiece very easy. It will also prevent the slipping around of the rail during alignment
yes gap 1/16, and I step back 1/16 when cut materials.
My point was, if you glue the rubber strip you do not havre to step back. Just aling the edge of the rubber to the cut you want make. That way you get absolute precision since the edge of the rubber is formed by the blade so you no longer rely on a measurement of the gap between the blade and the rail.
I understood. Thank you for advice.
A most excellent post!
AWESOME! !!!
Gee, this is a hard room to work!
Nice build!
Nice man. Thanks for Sharing.
Excellent design.
Great job- accurate saw
Now build yourself some tables, strong backs don’t last forever.
Thank you!
Sweet time and back saver! Great job.
Thank you!
Brilliant Mr. Thanks for the video.
You welcome!
Thanks for Video
thanks lot, keep it.....brother. ......
merci, très bonne idée.
Why do I feel like I'm watching the blue man group from las Vegas🤣' awesome Video
Thanks 😊
Good job, thanks for sharing.
мне понравилось , аж захотелось такую же . пила выглядет мощно , а моя по сравнению с вашей - какая-то игрушечная
Спасибо !
Good idea much better system than others I have seen.
Thank you!
Nice Job!! (protect your ears and feet)
Brilliant!
Good job on this. Here is my ideas. If you want to build this you don't need the expensive diablo metal cutting blade, any sharp carbide blade will work. Use WD40 as a cut lube while cutting the aluminum. Now for the other thing I would do different, Use a plastic block for the slide and don't ad the part on the outside of the blade, it is not needed. Buy a cheap cutting board and cut that to fit inside the aluminum guide. Much better, it slides more easy. Still screw it on in 4 places though, just not on the outside of the blade like fix it all did.
Robert B Thank you!
@454BigBlock its supposed to be a replacement for a table saw. it works pretty well for that.
incredible!!
wow! all blades are diablo!!
In recent years I purchased a Porter Cable circular saw electric model, they must have forgotten to put the edge guide in the box at the factory, at least I hope that's the case, I've never purchased a circular saw that didn't have one before. I do like the saw it's very well and made .
Thanks for sharing
when I start today making this maybe I will finish in 100 years
Thank you for very good video. What a fantastic idea my friend! !!!
Mahesh Suthar Thank man!
Красавчик приеду в Россию тоже так сделаю
Не пожалеешь. Сто раз себя окупит.
Interesting design. Thanks for sharing.
Glad you like it!
Beautiful absolutely beautiful
Thanks 😊
Even works on bushes. 🙂 Sry, couldn't resist.
Boa tarde amigo gostei muito do seu invento.
Que bom que você gostou do vídeo. Obrigado.
Bravo complimenti
excellent job thanks
Excellent! Thinking about the same thing, how to make long, straight cuts without a table saw.
Thank you!
well done. thanks
Thank You
You're welcome
excellent camera too!
Thanks !
No skill needed to use the guide rail, but you do need the skill to make it.
There are a few components to building a table saw. One resource I found that successfully combines these is the Wilfs Wood Blueprint (check it out on google) definately the most helpful plan i've heard of. Check out the interesting information .
Bravo!
Nice video thanks for publishing it. Where are you ordering your aluminum from. I want to build a rack for my solar system
Thanks!
Great job!!
Sp 6000 caseira ficou top
Desde Chile, y los guantes de seguridad
great work. TU
Wkwkwk hollow alumunium nya mahal pak,,, 😅 top banget pak
Thanks for watching!
Good job friend
Good job 👍👍👍👍👍
Reha Özenç Thank you!
just love it
best one i seen on u tube
Thank you!
I mean, you didn't make a guide rail for a circular saw. You made a circular saw into a track saw. Great concept and I gave it a thumbs up but I'm looking to keep my saw intact.
Muy bueno maestro, y si lo adaptaras a una mesa sería mucho mejor
Thank you!
Hay quá 👍
awesome bro...