Ordered mine from you guys for my RAM rebel a couple days ago, got an email estimate delivery next week sometime I absolutely cannot wait to get it. Just need the snow to go away and some warmer weather to install it.
Mines ordered. Waiting for the its been shipped email. My full bed rug is shipped. Get it on Monday November 15. Watcking this video closely to see if I can start to determine if a camper shell will go over.
Nice, concise video. I find it interesting that you were able to shut and open the tailgate without issue. Just finished install on my 2022 F150 and the backend of the side rails don't clear the top of the tailgate. The only way I was able to get my tailgate shut was to shim between the top of the bed rails and the BAK side rails. Not exactly the best solution, but better than where I have read others "massaged" (i.e. bent upwards) the side rails to allow clearance of the tailgate. I would be interested in any similar situation you have found and/or solution.
Looks like BAK learned from the shortcomings of the MX4. The old bloated hardware pack seemed like there had to be a better solution. One thing I am curious about is that there is no type of water drainage system on the Revolver, looks as though they're pretty confident in their mounting bracket by the bulkhead. I'd be interested to see what kind of waterproof seal can be maintained in the harsh winter weather that we have in NE Ohio!
Wish mine was this easy... the side to side alignment isn't right. The tabs don't fit into the groove in the bed rails. Kind of frustrating, I guess I'll have to buy some shims.
There is another two-sided tape seal (red) and I did not find any instructions on where it should be applied. Is that for the edge of thetruck bed door?
I just got a 2023. F150 and my buddy has one of tnever opened in the box but on the box it says 2 thousandand 15 to 2019 and like I said, I got a 23. Do you think it'll fit? Does anybody know?
You can, theres a strap to secure. You have to have it completely down or rolled all the way up though- can’t roll it out halfway or anything like that.
I seen another review video, guy installed and the first thing he did was take that plastic piece off and super glue it. It removed to easy guess yours was lost?
Hey Robert, you can find it for your vehicle here, realtruck.com/p/bak-revolver-x4s-tonneau-cover/v/ford/f150/2019/?z=1641393213377. The bed size will be listed as 5.7 on our site. Hope that helps!
I have the model that fits the 2015 through 2020 F150. I sold that truck and now have a 2021. Will the 2020 cover fit the 2021? What are the differences between the 2020 and 2021 model covers? They look the same to me.
After 2 1/2 years on my 2021 F150, the glue failed on the inside insulation, and the vinyl separated from the edges in hot weather. Beware of product failure and warranty.
Mine is ordered. This was the best example of how to install, thank you for the nice details.
You are welcome!
Ordered mine from you guys for my RAM rebel a couple days ago, got an email estimate delivery next week sometime I absolutely cannot wait to get it. Just need the snow to go away and some warmer weather to install it.
Feel free to share pics with us on Facebook or Instagram!
Step by step clearly presented.
Mines ordered. Waiting for the its been shipped email. My full bed rug is shipped. Get it on Monday November 15. Watcking this video closely to see if I can start to determine if a camper shell will go over.
What could cause my tailgate to interfere with the left rail?
Does a drop in bedliner that covers the front of the bed have to be removed?
This is the cover I want.
Nice, concise video. I find it interesting that you were able to shut and open the tailgate without issue. Just finished install on my 2022 F150 and the backend of the side rails don't clear the top of the tailgate. The only way I was able to get my tailgate shut was to shim between the top of the bed rails and the BAK side rails. Not exactly the best solution, but better than where I have read others "massaged" (i.e. bent upwards) the side rails to allow clearance of the tailgate.
I would be interested in any similar situation you have found and/or solution.
I just undid the clamps near the tailgate, closed the tailgate so the rail was sitting on top of it, then tightened the clamps back up.
Looks like BAK learned from the shortcomings of the MX4. The old bloated hardware pack seemed like there had to be a better solution. One thing I am curious about is that there is no type of water drainage system on the Revolver, looks as though they're pretty confident in their mounting bracket by the bulkhead. I'd be interested to see what kind of waterproof seal can be maintained in the harsh winter weather that we have in NE Ohio!
Wish mine was this easy... the side to side alignment isn't right. The tabs don't fit into the groove in the bed rails. Kind of frustrating, I guess I'll have to buy some shims.
One of the star bolts doesnt even make it to the top of the tonneau cover by the bulk head... what should i do?
How do I get black clamps? They sent me bare aluminum clamps with x4s.
My bedrug is in. I get my bak revolver x4s tomorrow.
How's that combo
There is another two-sided tape seal (red) and I did not find any instructions on where it should be applied. Is that for the edge of thetruck bed door?
Hey there! That is a thinner bulkhead seal to use if you have a bed liner that wraps over the bulkhead. Hope that helps.
Mine didn’t fit side to side…same truck. Tailgate doesn’t close…hits the end of the rail.
I just got a 2023. F150 and my buddy has one of tnever opened in the box but on the box it says 2 thousandand 15 to 2019 and like I said, I got a 23. Do you think it'll fit? Does anybody know?
Probably going to get this one, but I figure you can’t drive with it rolled up , can you?
You can, theres a strap to secure. You have to have it completely down or rolled all the way up though- can’t roll it out halfway or anything like that.
hi do a video on 2021 ford ranger bak x4s do not fit ??
Thanks for the video! It helps a lot… BE ADVISED!!!! PLASTIC PIECE AT THE CORNER CAN EASILY BREAK!!! Sadly it happened to me 😭
happened to me too, just now. did BAK send you a replacement?
I seen another review video, guy installed and the first thing he did was take that plastic piece off and super glue it. It removed to easy guess yours was lost?
My driver side piece popped out during installation 😅
I have an 2019 f150 xlt sport crew cab 5.5ft bed. I don’t see this size on the website? Thank you
Hey Robert, you can find it for your vehicle here, realtruck.com/p/bak-revolver-x4s-tonneau-cover/v/ford/f150/2019/?z=1641393213377. The bed size will be listed as 5.7 on our site. Hope that helps!
I have the model that fits the 2015 through 2020 F150. I sold that truck and now have a 2021. Will the 2020 cover fit the 2021? What are the differences between the 2020 and 2021 model covers? They look the same to me.
Just curious if you ever got a answer to this as I also have the same question
@@danenwoodward8112 supposedly the 21+ have different dimensions.
will this work still if I have a sprayed in bedliner?
Yes, it will :)
How much does the revolver weigh all in?
After 2 1/2 years on my 2021 F150, the glue failed on the inside insulation, and the vinyl separated from the edges in hot weather. Beware of product failure and warranty.