The headers are from the 2016 model. Because the 2017 headers only fit a ugly style can. With the 2016 headers you can choose more variety style of cans.
Presumably just a 2016 Akra silencer also? Its good the hanger fits onto the stock 2017 mounting point (rear pillion bracket) I too hate the look of the stock duel pipes but just looking at options of what will fit. Good to know this system fits. Did you have to modify any part of it?
It sounds great! I think that end can makes the 2017 bike look old though, the new Akrapovic Ti GP style end can for this bike suites the 2017 bike a lot better, bang up to date, just my thoughts though!
The new one is hideous and that little secondary pipe becomes useless once you go with a full system that deletes the cat and exhaust servo. The pipe just does this useless loop that feeds right back into the main run.
Absolutely beautiful sound... Enjoy :-)... I would like the same (have the same bike). Only problem is police in Italy... They would crucify me with fines... You're in Holland, right? Guess you just outrun the cops? ;-)
so nice! it is the evolution line from akrapovic or the racing line? because on their website there are 2 type of line for 2016... i'm a little bit lost
Love this modification!did you use a servo eliminater?and once you dynod it did it get rid of the deceleration backfire?I'm the rare few that would prefer it if it didnt!ha
Hi can you confirm that there is no issues with fitment?headers....footrest bracket ect?I'm very close to doing this to my 2017 so just checking?is that silencer cut down?cheers
So, what specifically must be modified for the 2016 Akra to fit the 2017+ bikes? You said you had to cut the pipe...what pipe, how much, and at what angle?
Was laatst bij een vriend die een RS4 heeft en hij had de can laten inkorten. Dealer had het gedaan. Zag er zoveel beter uit. Heb je de uitlaat bij pajic laten plaatsen? Anders contact ik ze even wat de mogelijkheden zijn. Toffe bike man. Ik heb een zwarte uit 2015.
Nice! What exhaust is that? Is it for the 2016 model?
The headers are from the 2016 model. Because the 2017 headers only fit a ugly style can. With the 2016 headers you can choose more variety style of cans.
Do you think the S1000RR models complete shorty akrapovic titanium would fit the 2017 S1000R?
Don't know sorry. You can email Akrapovic themself
Presumably just a 2016 Akra silencer also? Its good the hanger fits onto the stock 2017 mounting point (rear pillion bracket) I too hate the look of the stock duel pipes but just looking at options of what will fit. Good to know this system fits. Did you have to modify any part of it?
Not at all. It's the 2016 full system. With without issues. The 2017 system is the ugly one with 2 pipes
you need a reflash or remapped chip to prevent engine damage since they run lean stock.
Sounds damn good!! I just added an SC Project CR-T slip on to my s1k...gonna do akra headers during the winter
Headers make a LOT of difference!
The difference is huge!
It sounds great! I think that end can makes the 2017 bike look old though, the new Akrapovic Ti GP style end can for this bike suites the 2017 bike a lot better, bang up to date, just my thoughts though!
I think this looks much better. The new one looks ugly imo
The new one is hideous and that little secondary pipe becomes useless once you go with a full system that deletes the cat and exhaust servo. The pipe just does this useless loop that feeds right back into the main run.
opmike343 I guess then you don’t really like Ducati either :)
Absolutely beautiful sound... Enjoy :-)... I would like the same (have the same bike). Only problem is police in Italy... They would crucify me with fines... You're in Holland, right? Guess you just outrun the cops? ;-)
No. Just accept the fines. ;)
Mooi Geluid. Zie dat je ook TomTom hebt. Waar heb je de voeding op aangesloten, rechtstreeks op de accu ? Heb de mijne gisteren gekocht 😎
Op de stadslicht kabel
Sweet sound! Can you share link for your rear taillight?!! 😍🏍🙏
It's stock
ik vind helemaal mooi
Geluid is perfect en motor ook 🚀🚀🚀🚀
Damn, that sound when idle 😍😍😍
Very nice! Could you give me some more info on what you cut and how much you cut off the pipe and what end can you used? Thanks
Did not cut anything
wat een beest ouwe
Sick bike !! Did you use an adapter for those mirrors ? they look a bit higher than normal
01:34 wow... 😍
so nice! it is the evolution line from akrapovic or the racing line? because on their website there are 2 type of line for 2016... i'm a little bit lost
Ke Vin I have the 2016 model. The 2017 model is with a ugly can
Love this modification!did you use a servo eliminater?and once you dynod it did it get rid of the deceleration backfire?I'm the rare few that would prefer it if it didnt!ha
No eliminator. Backfire is stock
Bet your neighbors love you. lol. Don't leave your bike out at night.
Bonjour, superbe sonorité avec cette ligne Akra!!!
C'est la ligne complète racing 2016? Avez-vous changé la MAP d'origine?
2016 headers. The map is original but has been reset
Merci pour votre réponse. La courbe de puissance est bien remplie ou connait-elle un "creux"?
It's good
Ced MAN if you ask me, it’s awkward that one writes in French and the other answer in English , but don’t mind me . I’m here just for the comments. :)
Did you cut the pipe a little bit to make the bracket fit more higher on the slip-on? Thanks.
You are very sharp :) Yes it's cut a little bit.
BAKLAVA RIDER You mean shark ...
Hi can you confirm that there is no issues with fitment?headers....footrest bracket ect?I'm very close to doing this to my 2017 so just checking?is that silencer cut down?cheers
No issues
What are those mirrors? They look good
Rizoma mirrors
Nice! Did you add power commander or Bren tuning?
Stock ECU. Stay tuned for more
Hi there Im looking for the same exhaust system for my 2019 and struggling. Where did you buy this please?
Custom made by Pajic
So, what specifically must be modified for the 2016 Akra to fit the 2017+ bikes? You said you had to cut the pipe...what pipe, how much, and at what angle?
opmike343 just a centimeter on the end pipe
De headers & demper van 2016 passen zonder problemen op de vanaf 2017 modellen?
Zonder problemen!
engine roar.
Did the dealer tune the bike?
Were there any sensor wires that you had to cap off when you replaced the headers and midpipe? Thank you!
Nope. Plug and play
The silencer isn’t the original one of the the full sistem intended for the bmw? It look like that of the KTM superduke r, right?
Right. I like this one more.
Ouaaahh!
isnt it a little unstable with the risers? or is it just as wheelie prone as always?
You mean the steering risers? They are fine.
Heb je de end can zelf ingekort? Of is dit niet de standaard s1000r end can.
Niet de standaard can. Die nieuwste can is lelijk vind ik. Deze past beter.
hi, did you have to have a power commander fitted?
Nope only a ECU re-calibration
What screen is that?
See other video
Popopo 😘👍👍💕
Welke windscherm is dat?
Check other video of it
End can looks shorter? Which can is this?
Different one. Not the newest. Not sure about the name.
Was laatst bij een vriend die een RS4 heeft en hij had de can laten inkorten. Dealer had het gedaan. Zag er zoveel beter uit. Heb je de uitlaat bij pajic laten plaatsen? Anders contact ik ze even wat de mogelijkheden zijn. Toffe bike man. Ik heb een zwarte uit 2015.
Thnx. Inderdaad bij Pajic. Meerdere dempers geprobeerd. Maar dit zag er mooi uit.
What's the windscreen
Bike Life from Puig
nice
You have more shit on your 2017 than I do on my 2014.
:)
Same
Buy better speakers
@@baklavarider8878 I got BMW S1000R 2019.I know what can do this motorcycle 🏍.
wtf bass sound of exhaust....
It's really loud in person
No nice sorry, nipon is the best
yoooog amk