Just got this bundle kit. It's a little pricey and took a bit of patience to install (because I'm kind of picky and like things done correctly and neatly...so I even took the opportunity to properly clean the inner screen while I had the chance when modifying everything else), but so damn worth it in my opinion! I love it! My kids love it! It will most definitely provide us with long term entertainment!
Wow well done coming from a guy who knew nothing about modding last year spent lots of time and did all the mods which was cool but what a little pain in the ass, here everything is done yea you have to pay but time is money especially the whole image on sd card thing what a pain so I thank you guys and will be placing an order real soon
I have the NBA Jam 4-player Arcade1Up cabinet with the WiFi multiplayer (which is really fun). The concept of this mod is great, but I'd like to figure out a way to switch between the Arcade1Up board and the Raspberry Pi.
did you do it? I was gong to yesterday but 369 from 399 but waited till today after getting a question or two answered....and now today it's 389 down from 429? So I'm hesitating Again wondering if I jsut want to buy another one or two of the 1up arcades
Yea. Just got the order in and put it together yesterday. Everything works like it should. Just disappointed in the customer service. I understand they were probably busy because of Christmas. But I have to say, the customer service was pretty bad. They ran out of parts and sent me a link to amazon items to order, and refunded the exact amount that amazon charged, instead of the amount they charge on their website, and there was a different in prices. Also sent me link to the wrong part, luckily I know just enough to know the right part to order. And most emails I sent were either rudely answered or not at all. I managed to get everything working. Just really disappointed in the customer service. I would not order from them again.
Looks like this build turns on when you plug in the raspberry pi. I wired my own so that the On/OFF switch does this and it's easy to do. Search YT for the tutorials if you want to try yourself.
We got our kit earlier in the week. Instructions could be better with bigger pictures to see, this video was very helpful but skips a bit of other stuff that needs to be connected in the box. So between both, watching this and reading instructions over and over during the install, it took 4 hours to get it all done. I wanted to make sure I did it right, especially my first go at it. If I had to do it again it should only take an hour. One of the wires on the light strip needed to be reconnected. When you install the light strip, get some double sided mounting tape like 3M or Alien tape, and help secure it on the ends and the middle. The light strips started falling shortly after, but this is my experience with all light strips. Our speaker box panel was 1/4 of an inch too long, as it was longer than the existing panel, so it would bend inward exposing other parts of the inside cabinet, looked bad, so we put original panel back in for now. We placed the speakers on the bottom of the inside of the cabinet for now. The speaker wires could have been pre stripped, and connected/crimped to the connectors. One of the three predrilled holes on the lower part of the marquee were off, so we could not screw that one in to the lower part, but is still held in place by the other two. We are going to buy a longer connector to put the marquee light switch on top of cabinet so we can turn it off when not in use. We may purchase different speaker, or a line in speaker, or use my old Bose speaker that has plug in audio wire All and all still a great purchase and are happy with it so far.
I just got my kit today. I bought my Arcadeup1 off amazon like a week or two ago, but I didn't build it since I was waiting for the mods to show up. I figure why put it together twice. I will probably do everything tommorow or over the weekend when I got time do it right, but I'm working all the steps to prep myself for the moment before I call it a day.
Question for you guys- the screen is bigger, but is it better than my gen 1 monitor? I have a vertical screen and you can only see properly on one side.
choppa gunna not yet. Had some financial things come up. I will eventually though. I did hear they were really busy trying to fill all the orders. I figured that these would be popular.
Where does the sound come from if you don't buy the speaker upgrade? You say the drop in control panel is all you need yet when you show the back it looks like the mono speaker is no longer there.
Was wondering if you can help me out i config my ipac controller to the button config you have and only recognized the Y button. And its config to keypad mode the ipac.
First of all,I want to say that the kit is well worth it.I can’t stop playing it.The wife is getting angry.I was a little disappointed that the kit did not have any N64 or PlayStation games.The opening image shows these systems.The only other thing is that the marquee did not fit as well as it should.With that being said,I would definitely recommend this.
Aaron Martinez Not sure what you mean.I hooked everything per instructions vid.I didn’t change the monitor.Everything works fine.There are a couple of games that have problems but so far 98% work perfectly.
@@paulburrage5499 They're okay. Not as good as a console controller when playing games like Zelda, a little slower switching directions. It has USB ports, so I'm going to try to hook a controller up through that.
I wanted this so I could have a machine that saved high scores without having to save state. This mod gave me the machine I have always wanted. For any game that didn’t save it’s high score, I just changed the emulator in the options from Final Burn to Mame2010. After testing hundreds of classics only Spiderman(Sega) did not work. Even the Daphne games worked!
I order a full kit, I love how it came out everything works great and very ez to install. only problem is the led stirp is not brite it dose not light the marquee
Got one of these kits about a month or so ago, figured I would come back and leave a review for anyone else on the fence. The Hardware: The joystick and buttons are placed nicely, everything feels like where it should be. The graphic on the control board and marquee look fine, only “issue” is that they aren’t perfectly flush. There’s about a 1/4 inch gap between the control board and the screen, and a slight enough gap to see a little light through on the marquee when looking at it dead on. I think it’s fine personally, but I can see some people complaining. The main issue I had was that the player 2 joystick was not working correctly. Bought a nice Sanwa to put into player 1, and put the player 1 joystick arcademodup sent into player 2. Problem solved. Outside of that, all the buttons were wired up perfectly and work well. Speakers are the bare basics, but work fine. The Games: The collection is very nice. There are about 5,000 games and over 95% of them work perfectly. None of the Daphne games work. The only game outside of that that stands out off the top of my head that doesn’t work at all is Strider 2, you’ll have to hard reset if you try to play it. Some games are a little too big to handle the best and will run a little choppy, but again, not a lot really come to mind. Basically, anything you really want to play, works. I’ve been playing Marvel vs. Capcom, Sunset Riders and Metal Slug 3 a lot lately and it’s working great. Most of the games save the high scores, but there’s a good number that don’t. The only other complaint I could think of is that the version of Night Slashers is the censored U.S. one, and that’s super nit picky. All in all: It’s actually pretty nice for people new to modding but aren’t able to take the time to wire everything up or format images. All the important stuff is right, and any issues are an easy fix. So for the most part, it is absolutely “plug and play.” It’s hard to say whether or not the price is too high or not, considering there aren’t a plethora of companies sending you the controls all wired up and everything ready to go.
@@reddytosevelt I got the 2 player street fighter and the 4 player tmnt... They both needed some finagling but i got both working and its alot of fun...
Does anyone know how can I revert the controls? I accidentally changed them and can’t press the bottom that confirms on the menu so I can’t changed them back
Will you guys be coming out with a mod kit for the new marvel vs capcom x-men 97 deluxe edition? I would love to get one of these kits but there doesn’t seem to be one for my specific cabinet
I took my time put everything together( I bought the XL), took quite awhile. The sound was great, the buttons and trackball lit up, no visual!!.The monitor acts like it wants to light up, but no picture. $525.00. Hopefully it's a quick fix
Did you ever figure this out? I’m having same issue. Screen is grey but sounds and lights work. When I hook up to a tv it also works. Monitor is not fried, I’ve powered up other control panel to confirm. Ty
I actually bought the 19" upgrade monitor. What a trainwreck, they must have hired Stevie Wonder to put the components on, it was on the side. Thus it could not be connected to the components( I ordered a vertical monitor), I ended using an extra computer monitor. Worst Company ever.
I am so buying this kit when i get my next paycheck, thank u for sharing this video and the installation is not as complicated as other TH-cam vídeos and its a piece of cake, and btw how did u wire up the speakers tho?
It seems the plexiglass cover makes it too tall. Does anyone have any suggestions for replacement longer screws that I can use to secure it down? One screw makes it but barely and the others are not threading at all.
does it have golden tee for if you add a track ball? alos if you do the 2 player xl does it come wit the standard white 3" ball or do you have to add the 3" light up ball? i dont see an option to add a regular 3" ball like there is for a 2" ball with the standard 2 player deck.
Hey I’ve had mine for 4 weeks and the screen stopped turning on. I’m not sure what’s wrong with it the sound and lights still turn on just not the screen. I haven’t moved it or taken it apart or anything.
How can I just get the control panel without the Pi (already have one with 10k games)? I want to upgrade my 1 player 4 in 1 Ms. Pacman cabinet to a 2 or even 4 player multicade.
@@arcademodup2286 Yeah, I think it's because they added the Simpsons Bowling trackball, which then displaced Homer's controls. They should have left those controls alone and placed the trackball a little higher on the panel.
That’s Badass I like doing stuff like this myself but I think this time I’ll just spend the money to have it done.... Great video you got my vote👍🏼👍🏼👍🏼🤘🏼🤘🏼🤘🏼
I ordered two light up marquee kits and never got the power splitter instead I was sent a power adapter. Why would I want to power cords going to one machine. This just happened
I got a question so I've been having my arcade mod up for about 5 months and today the screen started flashing I noticed the hdmi monitor board was flashing red then green what can I do to fix this issue
I am assuming since this connects to a pi you can simply connect the HDMI to a PC instead once you use your kit? Thinking of investing as a PC would be a better option for me for more powerful games like dreamcast and ps2.
@ArcadeModUp hi i bought your full kit around a year ago i went to play in the setting a couple days ago to be able to add a track ball mouse to play game that need trackball but now i cant lay any game anymore would it be possible to get a download link for the image it was the image 32gb for the pi 3b+ thank you
Just got this bundle kit. It's a little pricey and took a bit of patience to install (because I'm kind of picky and like things done correctly and neatly...so I even took the opportunity to properly clean the inner screen while I had the chance when modifying everything else), but so damn worth it in my opinion! I love it! My kids love it! It will most definitely provide us with long term entertainment!
did it come with the games
@@adambouches7396 Yep!
Just ordered my kit with monitor upgrade. Had a few questions before ordering and customer service promptly responded. Cant wait to set it up!
How it go? thinking about ordering the same order u got
Ordered this kit last week. Been waiting patiently as it was shipped today. Will be using video to help get installed. Great vid...
how was the installation? what cords did you have to buy yourself? Or was all cords provided in the kit
I bought their 4 player upgrade kit. Awesome kit! Simple plug and play. NO ISSUES at all.
Are all the games already on the system, or did you have to download them to your Raspberry Pi SD card?
@@tonyl6203 it is plug and play. No hassle to download or program controllers as long as you buy theirs.
Just bought a whole kit, super excited and can't wait to mod my arcade one up
How long did it take to get to you. Ordered mine last week still nothing
@@zuluunion1121 once they figure out exactly how you want it... It took about 4 days to get to me and took me about a hr to put together
How has your mod worked out for you?
Wow well done coming from a guy who knew nothing about modding last year spent lots of time and did all the mods which was cool but what a little pain in the ass, here everything is done yea you have to pay but time is money especially the whole image on sd card thing what a pain so I thank you guys and will be placing an order real soon
Much needed upgrade for me. Just bought a kit from you guys!
Is it good man? ..does it have street fighter x tekken?
Nice. I’ll probably be buying one of these off your site soon. I’m going to need the MK one.
I have the NBA Jam 4-player Arcade1Up cabinet with the WiFi multiplayer (which is really fun). The concept of this mod is great, but I'd like to figure out a way to switch between the Arcade1Up board and the Raspberry Pi.
Just finished getting my kit setup, it is awesome defiantly worth the buy! Great job arcademodup
How did you get the games loaded on there. Any video link?
This video is 4 years old...Is there a newer updated version today? Thanks
This is actually making me wanna buy an arcade 1up now.
I think they're well worth it if you can find them on clearance. I got final fight and space invaders for 75 dollars. Couldn't pass that up
jaxfan damn where u get it that cheap?
@@JuanSalas-se7sl Walmart. I check brickseek to see what Walmart has them on clearance. I had to drive 45 minutes to get those. Worth the drive to me
Just found a space invaders locally clearenced for $75. Walmart find aswell. It's possible to find them. Happy hunting
@@AaronRoney deals.consolekits.com
Check this website out. Console kits made it. It's better than brickseek.
I wasn't down with this at first but man it looks awesome!! Kinda want to do my street fighter cabinet
did you do it? I was gong to yesterday but 369 from 399 but waited till today after getting a question or two answered....and now today it's 389 down from 429? So I'm hesitating Again wondering if I jsut want to buy another one or two of the 1up arcades
@@miragexl007 wow it's gone way up since my purchase at $319 ....I'm guessing because its selling pretty good now.
Just ordered a kit. Excited to get it installed!
How does the game run???
@@newjackgaming88 runs great. It’s pre-configured
Just ordered this kit like 3min ago, can't wait!!!
Is there a game list???? I’m on verge of ordering too
@@italiad1013Good question, I think they send the list to your email or with the bundle mod kit.
I just got mine says there's a little over 4000 games
Is there step by step directions on how to build the 2 player xl box assembly? The included directions are very confusing!!
Awesome job guys. Just ordered one. Will update after arrival
Eddie A any up date?
Yea. Just got the order in and put it together yesterday. Everything works like it should. Just disappointed in the customer service. I understand they were probably busy because of Christmas. But I have to say, the customer service was pretty bad. They ran out of parts and sent me a link to amazon items to order, and refunded the exact amount that amazon charged, instead of the amount they charge on their website, and there was a different in prices. Also sent me link to the wrong part, luckily I know just enough to know the right part to order.
And most emails I sent were either rudely answered or not at all. I managed to get everything working. Just really disappointed in the customer service. I would not order from them again.
Eddie A! I gotcha. Seems expensive through this site? It says like 400 dollars
You showed the example of powering down but how do you power it up? Thanks!
Yeah...I powered mine down as he said to above, and now I can't get it to turn back on. I emailed them a couple days ago asking for help.
Looks like this build turns on when you plug in the raspberry pi. I wired my own so that the On/OFF switch does this and it's easy to do. Search YT for the tutorials if you want to try yourself.
I want one of these. Definitely saving this video!
How do you turn the cabinet on and off? I don't see a power button on that controller
We got our kit earlier in the week. Instructions could be better with bigger pictures to see, this video was very helpful but skips a bit of other stuff that needs to be connected in the box. So between both, watching this and reading instructions over and over during the install, it took 4 hours to get it all done. I wanted to make sure I did it right, especially my first go at it. If I had to do it again it should only take an hour. One of the wires on the light strip needed to be reconnected. When you install the light strip, get some double sided mounting tape like 3M or Alien tape, and help secure it on the ends and the middle. The light strips started falling shortly after, but this is my experience with all light strips. Our speaker box panel was 1/4 of an inch too long, as it was longer than the existing panel, so it would bend inward exposing other parts of the inside cabinet, looked bad, so we put original panel back in for now. We placed the speakers on the bottom of the inside of the cabinet for now. The speaker wires could have been pre stripped, and connected/crimped to the connectors. One of the three predrilled holes on the lower part of the marquee were off, so we could not screw that one in to the lower part, but is still held in place by the other two. We are going to buy a longer connector to put the marquee light switch on top of cabinet so we can turn it off when not in use. We may purchase different speaker, or a line in speaker, or use my old Bose speaker that has plug in audio wire All and all still a great purchase and are happy with it so far.
Did it come with the games pre-installed?
I need a Yoga flame kit upgrade. Don’t see it in your website. Lmk
I just got my kit today. I bought my Arcadeup1 off amazon like a week or two ago, but I didn't build it since I was waiting for the mods to show up. I figure why put it together twice. I will probably do everything tommorow or over the weekend when I got time do it right, but I'm working all the steps to prep myself for the moment before I call it a day.
Question for you guys- the screen is bigger, but is it better than my gen 1 monitor? I have a vertical screen and you can only see properly on one side.
Nice. Will be ordering the whole drop in kit soon. Thanks for the install vid!
Did you order yours yet?
I order mines on dec 1st and its taking forever to ship ...smh...
choppa gunna not yet. Had some financial things come up. I will eventually though.
I did hear they were really busy trying to fill all the orders. I figured that these would be popular.
@@michael3308 got mine in less than a week during dec
Those that got their kit. How was the install? Do the games actually play?
Where does the sound come from if you don't buy the speaker upgrade? You say the drop in control panel is all you need yet when you show the back it looks like the mono speaker is no longer there.
everyone that does this kit makes the smart idea to upgrade to stereo sound at the same time
This is what 1UP shouldve been! Ill definitely grab one sometime this year
Having trouble connecting the HDMI micro HDMI cord
Was wondering if you can help me out i config my ipac controller to the button config you have and only recognized the Y button. And its config to keypad mode the ipac.
just picked one up!! stoked to pop this baby in my street fighter 1up
Are the games already installed? Also, do you have to install the hdmi adapter?
@@digsmcfury9697 all of that is in the video. yes, games installed. i dont have it yet, but watch the video.
Rahul Puar Thanks! I just don’t see why they had to include a hdmi adapter to install.
I think to play ps4 or Xbox?
Oh no he said in the vid you need hdmi for the pie
damn you do the work i just install? im sold.
Is there a list of the games it includes for review? I want to see how many of my favs it includes??
Is there a list???
@@ElBrisho They sent me a list via email.
@@DarylWiseJr I ended modding it myself with 20,000 games
@@ElBrisho Does it have magic sword?
Does it have pacman...
If I'm still using the stock speakers that came with the cabinet, where do I plug my aux into? The Android box? Monitor converter ?
All of these games are already installed and comes with the arcade 1up kit bundle?
First of all,I want to say that the kit is well worth it.I can’t stop playing it.The wife is getting angry.I was a little disappointed that the kit did not have any N64 or PlayStation games.The opening image shows these systems.The only other thing is that the marquee did not fit as well as it should.With that being said,I would definitely recommend this.
Randy Adams did you have any difficulty with the LCD converter
Aaron Martinez Not sure what you mean.I hooked everything per instructions vid.I didn’t change the monitor.Everything works fine.There are a couple of games that have problems but so far 98% work perfectly.
wow...great job guys...will contact you tomorrow about purchasing
Do you have a list of the fighting games that are included ?
I just set my mod kit up today. It’s almost too awesome because there are so many games to choose from it’s hard to decide what to play.
How are the joysticks?
@@paulburrage5499 They're okay. Not as good as a console controller when playing games like Zelda, a little slower switching directions. It has USB ports, so I'm going to try to hook a controller up through that.
Chris .. How much was it ?
I WILL DEFINITELY HAVE TO ORDER A KIT FROM YOU GUYS !! LOVE IT !!
This is very cool! Thanks for sharing this. :)
I wanted this so I could have a machine that saved high scores without having to save state. This mod gave me the machine I have always wanted. For any game that didn’t save it’s high score, I just changed the emulator in the options from Final Burn to Mame2010. After testing hundreds of classics only Spiderman(Sega) did not work. Even the Daphne games worked!
How does it turn on after the upgrade? I see no power switch. Maybe I am just overlooking it?
You use a standard power strip.
You use a standard power strip.
I’m have a buzzing sound from the amp. What could be the cause?
I order a full kit, I love how it came out everything works great and very ez to install. only problem is the led stirp is not brite it dose not light the marquee
Can I get one of these for big blue and a Larger 2 player control deck?
We have the 2 player for big blue. Cabinet is wrong shape for 4 player.
Got one of these kits about a month or so ago, figured I would come back and leave a review for anyone else on the fence.
The Hardware:
The joystick and buttons are placed nicely, everything feels like where it should be. The graphic on the control board and marquee look fine, only “issue” is that they aren’t perfectly flush. There’s about a 1/4 inch gap between the control board and the screen, and a slight enough gap to see a little light through on the marquee when looking at it dead on. I think it’s fine personally, but I can see some people complaining. The main issue I had was that the player 2 joystick was not working correctly. Bought a nice Sanwa to put into player 1, and put the player 1 joystick arcademodup sent into player 2. Problem solved. Outside of that, all the buttons were wired up perfectly and work well. Speakers are the bare basics, but work fine.
The Games:
The collection is very nice. There are about 5,000 games and over 95% of them work perfectly. None of the Daphne games work. The only game outside of that that stands out off the top of my head that doesn’t work at all is Strider 2, you’ll have to hard reset if you try to play it. Some games are a little too big to handle the best and will run a little choppy, but again, not a lot really come to mind. Basically, anything you really want to play, works. I’ve been playing Marvel vs. Capcom, Sunset Riders and Metal Slug 3 a lot lately and it’s working great. Most of the games save the high scores, but there’s a good number that don’t. The only other complaint I could think of is that the version of Night Slashers is the censored U.S. one, and that’s super nit picky.
All in all:
It’s actually pretty nice for people new to modding but aren’t able to take the time to wire everything up or format images. All the important stuff is right, and any issues are an easy fix. So for the most part, it is absolutely “plug and play.” It’s hard to say whether or not the price is too high or not, considering there aren’t a plethora of companies sending you the controls all wired up and everything ready to go.
thanks ... just orederd 1 for my street fighter and 4 player for my tmnt...cant wait...!!!
InDanger Dogg how did it turn out?
@@reddytosevelt I got the 2 player street fighter and the 4 player tmnt... They both needed some finagling but i got both working and its alot of fun...
how are you hooking up the speakers. no instructions . which why are they to be hooked up
Does anyone know how can I revert the controls? I accidentally changed them and can’t press the bottom that confirms on the menu so I can’t changed them back
Will you guys be coming out with a mod kit for the new marvel vs capcom x-men 97 deluxe edition? I would love to get one of these kits but there doesn’t seem to be one for my specific cabinet
Super cool. I definitely need to get this
Mine isn’t coming apart I glued it!
I just want the extra game part I want just the card if I can get it loaded
Me2
i do not think they sell just the cards. go to the web site and at the bottom there is a place to ask them direct
@@atheistpeace7579 thanks
I took my time put everything together( I bought the XL), took quite awhile. The sound was great, the buttons and trackball lit up, no visual!!.The monitor acts like it wants to light up, but no picture.
$525.00. Hopefully it's a quick fix
Did you ever figure this out? I’m having same issue. Screen is grey but sounds and lights work. When I hook up to a tv it also works. Monitor is not fried, I’ve powered up other control panel to confirm. Ty
I actually bought the 19" upgrade monitor. What a trainwreck, they must have hired Stevie Wonder to put the components on, it was on the side. Thus it could not be connected to the components( I ordered a vertical monitor), I ended using an extra computer monitor. Worst Company ever.
@@newsnviewz wow I just saw this video and I was reading people's comments I think I'm going to pass on this
I am so buying this kit when i get my next paycheck, thank u for sharing this video and the installation is not as complicated as other TH-cam vídeos and its a piece of cake, and btw how did u wire up the speakers tho?
It seems the plexiglass cover makes it too tall. Does anyone have any suggestions for replacement longer screws that I can use to secure it down? One screw makes it but barely and the others are not threading at all.
Stuff plumbers tape in the hole. Works perfectly.
does it have golden tee for if you add a track ball? alos if you do the 2 player xl does it come wit the standard white 3" ball or do you have to add the 3" light up ball? i dont see an option to add a regular 3" ball like there is for a 2" ball with the standard 2 player deck.
will the arcade version of Marvel vs capcom work on on this?
If you mean the game then and MVC2 also.
Yes
Does your mod have the super Mario brothers on it to play
Do you get all the arcade games that the arcade 1 up has?
Good stuff! I need a SF marquee!
Can you also buy the deck with the modded buttons like the normal arcade1up deck?
Hey I’ve had mine for 4 weeks and the screen stopped turning on. I’m not sure what’s wrong with it the sound and lights still turn on just not the screen. I haven’t moved it or taken it apart or anything.
Sound like a lose connection. Plug rpi HDMI into another tv and test.
I’m interested but How many games actually include? It advertises to have 6000 games added but are they already installed in the raspberry?
Ready to play
I somehow got the screen oriented Horizontal versus vertical for my Galaga one up. How do you switch the orientation back to vertical??
How can I just get the control panel without the Pi (already have one with 10k games)? I want to upgrade my 1 player 4 in 1 Ms. Pacman cabinet to a 2 or even 4 player multicade.
Pretty freakin awesome! I would LOVE to see you guys come out with a DRIVING mod up for the Outrun cab! That would be killer!
DON'T BUY FROM THESE PEOPLE! THEY OFFER NO SUPPORT & MOST OF THEIR GAMES DON'T WORK!
Could I use this with a retro Rama build?
no instruction on hooking up these speaker why. can you make a video showing how to hook up the wires in detail.
th-cam.com/video/GZeDGDWji90/w-d-xo.html
Can you give us a better control panel for the Simpsons arcade? Homer's joystick/button layout needs to look more like Marge's.
You mean the buttons lower?
@@arcademodup2286 Yeah, I think it's because they added the Simpsons Bowling trackball, which then displaced Homer's controls. They should have left those controls alone and placed the trackball a little higher on the panel.
@@billydelacey should be easy enough. Can you open a support request through the website? We will get it on roadmap.
@@arcademodup2286 Nevermind.
That’s Badass I like doing stuff like this myself but I think this time I’ll just spend the money to have it done.... Great video you got my vote👍🏼👍🏼👍🏼🤘🏼🤘🏼🤘🏼
I’m interested on getting my street fighter 1up with all the games like that one how much
Can you get a board with HDMI out too?
Yes.
Just ordered mine without the lighted marquee. Where can I get a listing of the games included?
Contact site.
how was the setup once it came? What cords did you have to buy
cords you had to purchase or were they all there
I have the Arcade1 Up Super Pacman cabinet. At your Modup website I don't see a mod kit for it. Can you help?
Can I order just the SD card? Love how you have everything is order! The wrestling section sold me lol. I need. Please lmk
best explained video i have ever seen strait to the point and 100 percent explain should be no questions well done
I checked out your shop. I didn't see the Pi with the loaded up ad card sold separately. Am I missing something?
not missing anything. they sell it as a drop in kit only
any video of you hooking up the back
I ordered two light up marquee kits and never got the power splitter instead I was sent a power adapter. Why would I want to power cords going to one machine. This just happened
Any chance this has the old Star Wars Trilogy arcade game? Thanks
I was thinking of upgrading the sound panel on my Killer instinct Arcade 1 up cabinet. Would the J panel upgrade work for that cabinet?
Yes
Any possibility of lining up the 6 button panel to American Style? I noticed that it is arched to Japanese style? Otherwise it looks really good.
Can you guys do a video on how to remove the black bars on the screens it comes with please?
Does this work for street fighter legacy edition.
Silly question, but how do you turn it back on? Will any button boot up the pi or do you need to unplug it and plug it back in?
Can you save in the games and do all games run smooth (ps1 for example)
Yes to both
Sooooo, the kit already comes with the games downloaded and ready to play? Cause I’m all in if that’s the case. Probably gonna buy the TMNT cabinet.
Yes. For the most part they are already configured with binds and good to go.
I got a question so I've been having my arcade mod up for about 5 months and today the screen started flashing I noticed the hdmi monitor board was flashing red then green what can I do to fix this issue
Is Simpsons Bowling available pre downloaded on the raspberry pi 4?
Yes
@@arcademodup2286 It’s not listed on the ArcadeModUp game list page. So the webpage is saying one thing and your saying another. So which is it?
Is there a way to make it so it saves the theme you bc choose? Every time I turn it off and back on its random again
Yes. Send note to support. They have instructions
can anyone tell me how to get the games
they all come pre installed with this kit
Where is the power on /off switch?
Any idea what screen upgrade options there are for the Atgames Legends Ultimate? Lots of people doing the arcade 1up but not one video on the ALU.
Can you get the complete kit with non-led buttons?
Website does not exist? Are you gone now?
saw you have a big blue and sf2 type, is the sf2 compatible with the champion edition and the yoga fire edition?
What happens to the original games that came with the cabinet?
They are on the pcb on the original controller. You still get them on the mod as well.
Is there a way to add more music to the menu?
I am assuming since this connects to a pi you can simply connect the HDMI to a PC instead once you use your kit? Thinking of investing as a PC would be a better option for me for more powerful games like dreamcast and ps2.
@ArcadeModUp hi i bought your full kit around a year ago i went to play in the setting a couple days ago to be able to add a track ball mouse to play game that need trackball but now i cant lay any game anymore would it be possible to get a download link for the image it was the image 32gb for the pi 3b+ thank you