I did something similar a few years ago. I kept all the original controls. I bought some solder splices with heat shrink. The encoder board comes with wired connectors. Hooked up the old controls, saved some cash. Honestly, being a 80’s kid, the buttons and sticks in the arcade were sorta trash, beat up. I’d say the Arcade1up controls r an upgrade!
Very cool. I like how you can now turn on using the original cabinet switch and no amp needed. I was looking for the parts for it without the rasberrypi on your site. I just need those specialty plugs that go into the HDMI converter for the power and sound.
I want to add this: I did a full button, stick and USB encoder job on my Yoga Flame over the weekend, and when I was done, my plexiglass deck protector wouldn't lay down over the buttons; I had to loosen up all the buttons, align them using the deck cover, and then tighten them all back down. TLDR; If you're using a deck protector, use it to align the buttons before tightening them down all the way.
No need to drill in a yoga flame since you have the live button. Also, if you ever do decide to drill in the plexi again, we have shown a very easy method to align it in a previous video. Put the plexi on the board, then drop in the 4 screws to align the two together. Once aligned, mark your spot, clamp it down and carefully drill. Gets everything aligned very easy.
Awesome mod ! Great job! By any chance is there a way to have a different background while selecting games to not have that grim reaper or that death skull there ? Or is everyone stuck with that ? Reason is I have kids.
@@PrimeCustoms4u yes definitely. It comes with a few pre-installed themes you can easily change in the settings. Some are more friendly and different layouts
Hi, what’s the exact kit you used for your setup? I see there’s a few different hdmi converters and speakers cables. I’m planning on doing the mod to the street fighter 2 cabinet 2023 version Thanks for the help!
ive never been a fan of batocera, im a launchbox guy with my pc mods, but would love to know the programing to make my mini pc turn on the moment it gets power
@@gabrielgray it’s in the pc settings. Turn on your pc and immediately tap whichever button on a keyboard that enters your bios. It’s usually f2 or del. The pc will open the bios files. You’ll have to navigate and turn S0 state on. This will turn your pc on the moment it gets power. Designed for auto on if there is a power outage but works great for this reason. Doesn’t matter which front end you’re using. Good luck 👍
"Anyone can do it" if you have all those custom made extentions for the power switches. Very cool though. Did that mini PC come pre loaded with that build of Botacera you are showing? If so where did you buy it? Awesome mod thank you for showing :)
@@SiND3R thank you 🙏. It’s in the description. The kit comes with everything you see in the video including the mini pc with Batocera. It can be found at www.ShowtimeArcadeMods.com
Can you add games to that mini pc? Because I would love to make something like this but I really want to play gi joe. Just want to make sure before I buy all of this stuff, and thank you , and thank you for the video.
Interesting mod. I wish you said in the beginning of the video that you would be replacing the stock electronics with a mini PC and HDMI driver board. My main question though is how is the latency of the games? The only reason I haven't bought a 1-UP to date is because the latency between pushing a button and the reaction on the screen is horrendous.
Great tutorial. How do you compare or which do you prefer, doing this full mod you show here, or a soft mod for some of the cabs that have that capability, like SF II Deluxe?
OK, after seeing so many mod vids, this is it! Instructions are phenomenal. Take my money. I have the yoga flame cabinet, which i assume, is similar to this. Which kit on the site do i order? Exactly like this I want this! LFG!!!
Great video. I’ve been saying for years that I wanted to mod my gen 1 street fighter to do this. My only thing is can I use original joystick and buttons? I don’t want to replace parts if I don’t have to. Thanks!
@@stevenm1832 thank you. Unfortunately you have to swap out the buttons. You need buttons to connect to an encoder. That encoder needs to have a usb connection to plug into the pi/mini pc. The factory encoder does not therefore thru have to be changed.
@@douglasquaid5655 let me know if you find out. I'm looking for that, plus the wiring that goes with the audio so that I don't have to purchase the amp and do it like ETA Prime.
Appreciate the tutorial and specialty mod products. Would a trackball, spinner, and/or light gun plug directly into the player one encoder (if so, with slots)? And how do you map a trackball and spinner? Thanks again.
@@sonicfunB1 thank you. The simple way would to purchase a grs trackball and spinner from thunderstickstudios. The combo will have one usb that plugs into the pi/minipc. Won’t really need mapping as long as up is up and left is left.
Can I add more game roms to the mini pc ? Or, does that void warranty ? Approximately how many games are included in the Batocera install ? I’m very interested.
Nice job I found bartop with coin machine on the garage site. It has 2player joystick (each has 6buttons+1separate button(probably start button) Inside there is pandora box not working. So I put desktop and using zero usb encoder. mapping : A,B,X,Y,L1,R1, Start. I have question Can I use no select(hotkey)button? I concern coin, exit game from playing game and go manu on top
@@ChuuK-film batocera will usually require you to hit start and select at the same time to exit a game so you can push coin button freely to add credit
@ShowtimeGaming101 ok thank you, I was just curious cuz I think I seen where you said you recommend the Street fighter cabinet because of the buttons so wasn't sure if The Mortal Kombat cabinet would work.
Either should work, the joy sticks are recognized as controllers in batocera, it's just a standard computer, no arcade1up stuff is active really when using the mini-PC. You're not using the original games or software or any of it, just using the controls and the screen. None of the processing power. Or you can just plug a USB joypad into the computer directly, it still has standard USB ports on it. No different than using batocera on a normal PC if you use a controller. As for whether you can use light guns with Halo in batocera? I don't think so, but maybe. You're short many buttons if you do that.
Is there a way to see what games are included or at least comparison between the Raspberry to the PC? I want to buy but I need to make sure the game I want are included. Thanks!
@@Isaiah650 the site sells a plug n play mini pc. It comes with the power supply and hdmi. All you’d have to do is plug in the power supply, connect the hdmi to the tv and play.
Hi, very very nice video. Do you think it is possibile do the same starting with the time crisis 1up? Or SF 2 style is the only way? I like the time crisis 1up, but i want to instal batocera like yours to have all the game, lightgun too. Can you share a link with your image? Thank you for your time🎉
You maybe running n64 blitz but i know that The N100 processor does not run Blitz Arcade well; you will get sound stuttering. You need a mini PC with a 10th-generation(or higher) i5 or i7 to run Blitz on MAME. Believe me; I tried four different PCs. Even my gaming laptop with an i7 5th generation would not run MAME Blitz without annoying sound stutters.
@ without even overlocking, it runs flawless here with no sound stutters. 99, golden and 2k. Consider changing the emulators and see what version of MAME you’re running. There are many settings that can be adjusted to fix these issues
@ShowtimeGaming101 i would love to see that in action. I'm running the latest mame version I've tried several others on multiple pcs. If blitz on mame runs flawless on an N100 (on medium settings in the dip switches) cpu then I'm an idiot. Lol. I'd love to see this in action.
Great video, now during the Black Weeks on Amazon I also want to buy an Arcade1 and do the mod. Unfortunately, the parts you indicate on the website are not sent to Germany, as I have seen. Do you have an alternative for this on Amazon or Ali that I can order? I would like to run this with a mini PC that I already have. Thank you very much in advance!
You made something complex look and sound very easy, I know if I did this would take me a hour. But thanks to you're very detailed instructions I would be able to do everything.
@ you don’t have to drill. It’s only if you’d like to add more buttons. I prefer to have at least 6 buttons for the first 2 players since 6 buttons is required for most fighting style games such as street fighter. You can always add Bluetooth controllers and use those to play the games that require more buttons. Xbox, PlayStation, Nintendo pro controllers, 8bitdo, and virtually any Bluetooth controller will work.
@@DerekMatthews just plug it in and shoot. If a game needs to be mapped, you’ll have to do it in the retroarch settings. Otherwise it’s not really that necessary.
@@cameranmanner4701 all joysticks come 8-way with a restrictor gate that allows you to switch to 4-way whenever you’d like. We’ve also done a video on how to switch with the press of a button using the grs thunderstick.
@ShowtimeGaming101 yes, if you go from 8 to 4 way and vice versa it seems inconvenient when changing manually. I know motorized version is available, but for cost reasons it would not be package in your kit. If you make surface mount removable 8 way to 4 adapter (plate) included, it the would help some customers who don't want to install the GRS for cost reasons, the adapter would be good option.
@@ien2023 Get this setup without light guns and a pi5 for $249. There are many variants to choose from. Get the mini pc with a 1tb drive it’ll definitely be more. Light guns can be purchased from Sinden directly for $100 each without recoil. $150 with recoil. Also the inlet switch is in the link posted. It Comes with the mod kits.
okay this has me finally convinced I can mod my 1up cabinet!
I did something similar a few years ago. I kept all the original controls. I bought some solder splices with heat shrink. The encoder board comes with wired connectors. Hooked up the old controls, saved some cash. Honestly, being a 80’s kid, the buttons and sticks in the arcade were sorta trash, beat up. I’d say the Arcade1up controls r an upgrade!
Very nice work. This is every 80s kids dream come true.
Mfrs be just learning about mame in 2024.
Excellent info! Was thinking about jumping in to the 1up cabinet scene.
Very cool. I like how you can now turn on using the original cabinet switch and no amp needed. I was looking for the parts for it without the rasberrypi on your site. I just need those specialty plugs that go into the HDMI converter for the power and sound.
Fantastic video! Thankyou!!
@@AlexDawson2020AD Thank you! 🫡
I want to add this: I did a full button, stick and USB encoder job on my Yoga Flame over the weekend, and when I was done, my plexiglass deck protector wouldn't lay down over the buttons; I had to loosen up all the buttons, align them using the deck cover, and then tighten them all back down.
TLDR; If you're using a deck protector, use it to align the buttons before tightening them down all the way.
No need to drill in a yoga flame since you have the live button. Also, if you ever do decide to drill in the plexi again, we have shown a very easy method to align it in a previous video. Put the plexi on the board, then drop in the 4 screws to align the two together. Once aligned, mark your spot, clamp it down and carefully drill. Gets everything aligned very easy.
Why did you set the first player controller twice and the second player once? Does this solve the encryption chip problems?
Awesome mod ! Great job! By any chance is there a way to have a different background while selecting games to not have that grim reaper or that death skull there ?
Or is everyone stuck with that ?
Reason is I have kids.
@@PrimeCustoms4u yes definitely. It comes with a few pre-installed themes you can easily change in the settings. Some are more friendly and different layouts
Hi, what’s the exact kit you used for your setup? I see there’s a few different hdmi converters and speakers cables.
I’m planning on doing the mod to the street fighter 2 cabinet 2023 version
Thanks for the help!
@@Joe-le9zy reach out to the team on the website. They’ll be happy to help
Joey, did you ever get an answer? Wanting to do the same thing!
@ the team will always respond. Message here and they’ll be happy to help. showtimearcademods.com/pages/contact
Are the kits likely to be available to ship to the UK?
Great video. That looks clean!
@@Th3DarkCanuck thank you 😎
ive never been a fan of batocera, im a launchbox guy with my pc mods, but would love to know the programing to make my mini pc turn on the moment it gets power
@@gabrielgray it’s in the pc settings. Turn on your pc and immediately tap whichever button on a keyboard that enters your bios. It’s usually f2 or del. The pc will open the bios files. You’ll have to navigate and turn S0 state on. This will turn your pc on the moment it gets power. Designed for auto on if there is a power outage but works great for this reason. Doesn’t matter which front end you’re using. Good luck 👍
This made the whole install a breeze! My SF2 Cab is a fantastic multicade now
@@joshualara4223 Thank you for the support 🫡
"Anyone can do it" if you have all those custom made extentions for the power switches. Very cool though. Did that mini PC come pre loaded with that build of Botacera you are showing? If so where did you buy it?
Awesome mod thank you for showing :)
@@SiND3R thank you 🙏. It’s in the description. The kit comes with everything you see in the video including the mini pc with Batocera. It can be found at www.ShowtimeArcadeMods.com
@@ShowtimeGaming101 any amazon link? also the main power cable can't be found on your site
@ it can only be found at www.ShowtimeArcadeMods.com . All specially cables including the power inlet switch are hand made by showtime.
@@ShowtimeGaming101 they only sale as a kit ?
Which one exactly from the site you have that you show on your video?
Is there a controller option without the click? That would drive me crazy.
@@rfeldtz there’s an option for everything without controls so you can get another set if you desire.
Can you add games to that mini pc? Because I would love to make something like this but I really want to play gi joe. Just want to make sure before I buy all of this stuff, and thank you , and thank you for the video.
@@customgames8311 happy to help. 😎 I’d recommend reaching out to the team here about these questions. showtimearcademods.com/pages/contact
Interesting mod. I wish you said in the beginning of the video that you would be replacing the stock electronics with a mini PC and HDMI driver board. My main question though is how is the latency of the games? The only reason I haven't bought a 1-UP to date is because the latency between pushing a button and the reaction on the screen is horrendous.
zero delay from the zero delay buttons, joysticks and encoders. Runs perfect
Great tutorial. How do you compare or which do you prefer, doing this full mod you show here, or a soft mod for some of the cabs that have that capability, like SF II Deluxe?
Do you guys offer custom mods I have a countercade I would like to mod in the future ?
OK, after seeing so many mod vids, this is it! Instructions are phenomenal. Take my money. I have the yoga flame cabinet, which i assume, is similar to this. Which kit on the site do i order? Exactly like this I want this! LFG!!!
@@dj.excess showtimearcademods.com
Reach out to the site if you need help choosing the right kit. 👍
Great video. I’ve been saying for years that I wanted to mod my gen 1 street fighter to do this.
My only thing is can I use original joystick and buttons? I don’t want to replace parts if I don’t have to.
Thanks!
@@stevenm1832 thank you. Unfortunately you have to swap out the buttons. You need buttons to connect to an encoder. That encoder needs to have a usb connection to plug into the pi/mini pc. The factory encoder does not therefore thru have to be changed.
Did he show how to use the light gun? Do you have to map it? Etc
@@andylee4764 just plug it in via usb into the pc. No mapping needed
@@ShowtimeGaming101 awesome thanks
Can you buy just the power converter thing that you plug power bar into to use on off switch? That's all I need
I'd also like to know this. I'd like to purchase just the wiring. No pc, no Pi.
Also non lite up buttons with the encoder.
@@douglasquaid5655 let me know if you find out. I'm looking for that, plus the wiring that goes with the audio so that I don't have to purchase the amp and do it like ETA Prime.
i need those light up buttons for my cabinets
Appreciate the tutorial and specialty mod products. Would a trackball, spinner, and/or light gun plug directly into the player one encoder (if so, with slots)? And how do you map a trackball and spinner? Thanks again.
@@sonicfunB1 thank you. The simple way would to purchase a grs trackball and spinner from thunderstickstudios. The combo will have one usb that plugs into the pi/minipc. Won’t really need mapping as long as up is up and left is left.
Dammit, I wish you did international sales. There are some bits I would really like 😢
Did you run mains 120v power through that tiny power switch?
@@featherpony 6a 125v so it’s enough for this but definitely DO NOT OVERLOAD it
What theme you got on there?
@@firstechsolutions8713 the one you see is dark games, but there’s also the original, artflix, and remix
I have the single wall mounted arcade 1up street fighter 2 arcade. Is there one made for that version?
@@edwardgalicia1500 yes! check this out. th-cam.com/video/LEc99upb8TY/w-d-xo.htmlsi=Pd5ywGqy9IxmthFQ
Can I add more game roms to the mini pc ? Or, does that void warranty ? Approximately how many games are included in the Batocera install ? I’m very interested.
Nice job I found bartop with coin machine on the garage site. It has 2player joystick (each has 6buttons+1separate button(probably start button) Inside there is pandora box not working. So I put desktop and using zero usb encoder. mapping : A,B,X,Y,L1,R1, Start. I have question Can I use no select(hotkey)button? I concern coin, exit game from playing game and go manu on top
@@ChuuK-film batocera will usually require you to hit start and select at the same time to exit a game so you can push coin button freely to add credit
@@ShowtimeGaming101 thank you for your answer.
On the menu, is there a way to change the icon pictures and symbols? Not a big fan of the console icons used. Would rather it have a more retro look.
@@Tzelt24 yes definitely many themes to choose from in the settings
@ShowtimeGaming101 thanks for the feedback. That helps steer me more into the direction of getting this!
Where are the light guns from? Do they have feedback?
@@jeffc4399 Sinden light guns. There’s with and without recoil.
I can't find the website , no searches show up.
@@nickyscarfo1 link is in the description. Refer to this below.
www.ShowtimeArcadeMods.com
Can we just buy the cables?
Do you recommend the Street fighter cabinet for these mods or would a Mortal Kombat arcade work just fine?
@@4killer04 it would be virtually the same. The main difference would be the button layout on the control board.
@ShowtimeGaming101 ok thank you, I was just curious cuz I think I seen where you said you recommend the Street fighter cabinet because of the buttons so wasn't sure if The Mortal Kombat cabinet would work.
Do you play Halo with the arcade joysticks or the sinden light guns or you plug in another USB joypad ?
Either should work, the joy sticks are recognized as controllers in batocera, it's just a standard computer, no arcade1up stuff is active really when using the mini-PC. You're not using the original games or software or any of it, just using the controls and the screen. None of the processing power. Or you can just plug a USB joypad into the computer directly, it still has standard USB ports on it. No different than using batocera on a normal PC if you use a controller.
As for whether you can use light guns with Halo in batocera? I don't think so, but maybe. You're short many buttons if you do that.
@@emmanuellokoka9326 wireless Xbox controller is ideal
Hi nice video do you countercades I have a mortal Kombat that I always wanted to mod was curious if those can be modded as well
@@rigolujan7822 our kits are for the partycades and regular size arcades. Nothing for the countercades.
What Batocera Image is this? How big 1tb?
@@Dzey dark games, has more themes in the options as well. 1tb
Is there a way to see what games are included or at least comparison between the Raspberry to the PC? I want to buy but I need to make sure the game I want are included. Thanks!
@@meave2712 I’d recommend contacting them here. They’re very responsive. showtimearcademods.com/pages/contact
Sorry if the question is stupid but can i hook up one of these like a plu n play for a tv?
@@Isaiah650 yes you definitely can.
@ShowtimeGaming101 any good direction you can send me to so I can get started? Thx for the response by the way. Love your videos
@@Isaiah650 the site sells a plug n play mini pc. It comes with the power supply and hdmi. All you’d have to do is plug in the power supply, connect the hdmi to the tv and play.
Hi, very very nice video. Do you think it is possibile do the same starting with the time crisis 1up?
Or SF 2 style is the only way?
I like the time crisis 1up, but i want to instal batocera like yours to have all the game, lightgun too.
Can you share a link with your image?
Thank you for your time🎉
Do the Arcade versions of NFL blitz work and run well?
@@grgmj1980 runs flawless. With late hits
You maybe running n64 blitz but i know that The N100 processor does not run Blitz Arcade well; you will get sound stuttering. You need a mini PC with a 10th-generation(or higher) i5 or i7 to run Blitz on MAME. Believe me; I tried four different PCs. Even my gaming laptop with an i7 5th generation would not run MAME Blitz without annoying sound stutters.
@ without even overlocking, it runs flawless here with no sound stutters. 99, golden and 2k. Consider changing the emulators and see what version of MAME you’re running. There are many settings that can be adjusted to fix these issues
@ShowtimeGaming101 i would love to see that in action. I'm running the latest mame version I've tried several others on multiple pcs. If blitz on mame runs flawless on an N100 (on medium settings in the dip switches) cpu then I'm an idiot. Lol. I'd love to see this in action.
@@TheBigb1973 thank you for the advice, a demo of the game would be awesome.
Great video, now during the Black Weeks on Amazon I also want to buy an Arcade1 and do the mod. Unfortunately, the parts you indicate on the website are not sent to Germany, as I have seen. Do you have an alternative for this on Amazon or Ali that I can order? I would like to run this with a mini PC that I already have. Thank you very much in advance!
Does this work for the other versions of street fighter?
@@dantheman0731 yes. We’ve also done a gen 1 and a legacy. The process is the same for all. Check out our other sf videos.
Wow man I definitely gotta get this 😳😳😳😳
Best explanation
whats the model of the mini pc?
Maybe a dumb question, but does the original Arcade 1up game still work with mod? Wanna do this, but really enjoy playing Marvel vs Capcom 2 online.
@@sh0cktim3 unfortunately it will not
You made something complex look and sound very easy, I know if I did this would take me a hour.
But thanks to you're very detailed instructions I would be able to do everything.
@@chrisburrows9758 happy to help
Will this work on the “simpsons” 1up arcade???
@@noobfishing101 yes definitely 👍
But do you have to drill? The video with 4 player shows that.
@ you don’t have to drill. It’s only if you’d like to add more buttons. I prefer to have at least 6 buttons for the first 2 players since 6 buttons is required for most fighting style games such as street fighter. You can always add Bluetooth controllers and use those to play the games that require more buttons. Xbox, PlayStation, Nintendo pro controllers, 8bitdo, and virtually any Bluetooth controller will work.
Can you show the mapping of the guns?
@@DerekMatthews just plug it in and shoot. If a game needs to be mapped, you’ll have to do it in the retroarch settings. Otherwise it’s not really that necessary.
@ShowtimeGaming101 and where did you get them guns? Do you have a link plz?
@ sindenlightgun.com
Does it have Star Wars Trilogy on it?
where do you get the encoders?? because at the beginning, there isn't encoder when you started dismantle it.
@@tc-yq2cb it is included in the set with the new joysticks and buttons
Need to sell the cables separate so we can buy them without the pi.
This would be perfect for me IF it had a trackball for Centipede.
You should include a 8 way to 4 way adapter for the joystick. Any game using 4 way joystick will play horribly with a 8 way joystick.
@@cameranmanner4701 all joysticks come 8-way with a restrictor gate that allows you to switch to 4-way whenever you’d like. We’ve also done a video on how to switch with the press of a button using the grs thunderstick.
@ShowtimeGaming101 yes, if you go from 8 to 4 way and vice versa it seems inconvenient when changing manually. I know motorized version is available, but for cost reasons it would not be package in your kit. If you make surface mount removable 8 way to 4 adapter (plate) included, it the would help some customers who don't want to install the GRS for cost reasons, the adapter would be good option.
Mini PC $299, Sindin light gun x2 $300 =$600
@@ien2023 Get this setup without light guns and a pi5 for $249. There are many variants to choose from. Get the mini pc with a 1tb drive it’ll definitely be more. Light guns can be purchased from Sinden directly for $100 each without recoil. $150 with recoil.
Also the inlet switch is in the link posted. It Comes with the mod kits.
Why do I need to drill on a Simpsons 4 player?
He said easiest n cheapest
@@ShowtimeGaming101do u need to shut down properly on the Pi5 like you do mini pc, or can u just shut off?
@@dj.excess always recommended to shut down safely as shown towards the end of the video.
Brah 😂
This is not easy what so ever WTF dude.... I'm super freaking lost
Same
Lol this couldn’t be any simpler