FIXING A BROKEN FISHING ROD GUIDE
ฝัง
- เผยแพร่เมื่อ 9 มี.ค. 2022
- Replacing broken fishing guides is a common problem most anglers will face at some point or another. This video is a quick guide to replacing them at home using some basic equipment. If you have never tackled a guide replacement before, I would say practice on a rod that you don’t care about, just to gain a bit of confidence and see if you can pull it off. If you have a good quality rod to repair or something with a bit of sentimental value then it may be worth contacting a professional rod builder and let them do their magic. Things on the internet generally look easier than they should.
The hardest part of the whole gig is finding a matching guide especially if you have never bought guides. The easiest way to do this is to head down to the fishing tackle shop with your rod and see what they have in stock. You can physically compare guides and maybe get a bit of help from the staff. Another great option is to take some good close up photos with you phone or camera, measure some dimensions and post to an online fishing forum or facebook group. They generally have rod repair or custom rod building groups and often people are more than happy to help. Finally if you are feeling brave buy a selection box set of guides online and see if one fits, that's what I did and struck lucky.
For thread I used a black D grade nylon rod whipping thread, you may be able to pick this up at the tackle shop or cheaply online.
I used a two part rod finishing epoxy that has a working time of about 40 minutes, and cures in about a day. Small preloaded syringes rather than large bottles can also be found online or in good tackle shops.
I used some homemade rod rests cut from some 3” x 1” softwood to make working on the rod easier. You can tie and resin rods just in your hands, but it is far easier to have some kind of rest.
The second and third coats of resin do need to be rotated so the resin doesn’t sag and pool on one side of the rod. This again can be done by rotating the rod by hand every couple of minutes but it is going to take a few hours before the resin thickens up enough to stop running. You can buy rotating rod racks online but again I made one from a microwave motor I bought online and used a bit of tube to attach it to the rod.
For sanding between coats I used 600 grit wet and dry paper and to cover things up, masking tape.
Have fun - กีฬา
![[TH]FFWS SEA Spring 2024 Final](http://i.ytimg.com/vi/TK2mu-8yBFU/mqdefault.jpg)
I've been fixing my own rings for over forty years and I remembered that it took a few goes to get it just right. This is the first video that shows the process, it in its simplicity and entirety. All key areas were shown and performed correctly. Excellent video.
Where do you live
I need to fixing fishing rings please
@@vuethao2094 I live in Kent, United Kingdom
@@vuethao2094 w
Hey, quick question what type of string do you use? I’ve been collecting old Broken rods rods from garage sales are worth some decent money so I was thinking about repairing them and selling them forward. Thanks for the video.
@@Crush0819just use braided line
I built a few rods 40 odd years ago and the satifaction of making them, then catching fish on them is immeasurable. Always a pleasure to see your take on these jobs. I used dope to tighten the whippings then 2 or 3 coats of poly varnish to finish off. Don't be a stranger, always room for a handmade fishermans video :-)
thanks
@@PaulAdamsTheHandmadeFisherman yeah one time I got a stick and put a string and hook on it,caught a fish. Felt awesome!
Best notification of the day. Pleased to see you back !
Same here
Їїї
ABSOLUTELY!
For years i saw you making a lure. I was so impressed and started to do it either! So happy to see an new video
Im very familiar with fishing rods repairs but thoroughly enjoyed this from the production value alone. Keep it up! Love seeing you back!
This video was one of the most satisfying videos I’ve seen in a while. A true professional. Thanks for sharing!!
I replaced the guide on my rod after watch one of your old video..
First time and really happy with the result. Thanks
Great to hear!
Don’t ever stop making videos.
I just found your channel. The music and detail driven repair was amazing. Worth the subscription. Thank you for the content.
Шикарная работа! Понял что смогу сделать так же, стал в голове прокручивать всё поэтапно и поймал себя на мысли, что поставил кольцо задом наперёд и при этом закончил работу 😅
Right when I need to fix mine this video pops up!! Thank you ! Seems simple but it sure will be a lot of work and practice to get it right! Looking forward to explore more of your vids
Great to see you Posting.
Wow this brought back memories. When I was a kid. My dad owning his own fishing store which he named Willey & son's. I used to build custom graphite rods in the back like this. People would pick out their own colors. Eyelets. Length and so on. Now that I'm 37 and just got back in to fishing because I have kids of my own now. I wish I had all the stuff I did back then 😆
Love the content as always. Turned me into a lure builder. The quality of your filming is amazing
Q
Right lads Get him. We can't let him escape again. 😉
Welcome back buddy 👍🏻
Rod/reel combo with fishing kit as an emergency setup th-cam.com/users/postUgkxntWMOZsO1Zfv-pdn_XuffEtNkTYAYu4Z recommend but started to use this every day. The rod is thick and seems durable. I keep it neatly tucked into a regular backpack all the time with my fishing gear, and can grab it anytime, put it on my back and go anywhere. I just read in another review that the rod length below the reel is adjustable as well, so I will try that too for even more portability. Probably the best setup I've ever owned. I lost the cap for the eyelets, but no big deal since I still have the black cloth sheath that came for the pole and I use that. Very portable and high quality.
Love this channel, have learned a ton and every video is highly enjoyable! Thank you for making them!
Gentle and relaxing as always. And of course very informative 😉
Thank you, Paul!
Glad you enjoyed it!
This is a great video and you can tell the creator has a very keen eye for artistic work..even the editing
Wow, here is a blast from the past. Hope you are well. Please make more videos, they are always a great watch.
Thank you, I will
so glad your back,thank you. hope all is well.
Top notch repair and impeccable filming what a pro!
Vids like these thought me how to repair my own guides. Well done..
I can't tell you how satisfying this video is....
thankyou, i think the music really makes the atomosphere
I’ve long awaited this day 😂 Welcome back good sir 👍🏼
too loong beetweeen videos, i will have to pull my finger out, cheers
Been doing this over 35 years, I have 2 say I love the can for epoxy NICE!
if only it was my idea, but an old guy work showed me that one, he has been making rods probably a little longer than both of us
Sneaky return, always a pleasure to see you back again :)
Thanks, nice to see you back.
Amazing finish and glad you are back making videos.
Glad to see you back, sir.
Thanks for the video！Just struggling about that round of epoxy bulk's cleaning when i replace a guide.This video demonstrate how rod builders replace the guide without too much epoxy cleaning.Again, thanks a lot,really clear the doubt in my mind!🥰
Thank you for providing an informative video. pleased to meet you.
🇮🇩 *INDONESIAN ANGLER* 🇮🇩
Thanks for coming
this is art. i can tell he reparing this with his heart
This morning I was getting my gear together for a upcoming trip. I noticed a broken eye. Found this video and ultimately replaced the broken eye. Thx!!
that is the best kind reaction, so many things i have fixed things thanks to a TH-cam video, washing machines, computers and thousand and one other Things, thank you you have made a very difficult day a end on a happy note
Heck yeeeeaaaah
We are never ever forgetting about you, Paul!
Useful info thanks. I like the idea of using the inverted can to mix your Resin! 👍👍
Glad it was helpful!
great video on replacing a broken ring
So much to love about this video. Thank you so much for posting. Keep up the great work.
Thank you! Will do!
Comprehensive guide. Great job.
Magnificent work as always.
Exceptional... reminds me of when i was a kid and taught myself to repair my own rods...
And thats exactly the way I would have done that Job! Well Done Paul!
Very informative tutorial. Thank you for the lesson. I will put it in practice. Informacion is confidence.
Thank you for this video glad to see you back thanks for the simplicity and great clarity
Glad you’re back!
Fantastic video! Thanks for sharing. I'd just buy a new rod but I think I'll give this a try.
very nice video about fishing gear and repair....I didn't know that its possible to repair that part. Well done. ⭐⭐⭐⭐⭐
Mixing on the bottom of a can. Brilliant.👌😎
Well hell this new grandpa is fixing his own poles from now on. Very nice work.
Nice to se you again Paul!
Cómo siempre, el mejor contenido de pesca, Saludos desde Guatemala.....
Woo hoo he's back welcome back buddy!
Welcome Back, Paul
Wow I used to watch u back in 2013/14 it's been 9 years ..... Damn
Brilliant- thanks for such an informative video! Can’t wait to try this! ⚓️
Hope you enjoy it!
We'll I guess that confirms I'm throwing out my broke Abu rod! Major props for video and repair skills.
Great video as always!
Você é o CARA.
Parabéns.
Ficou bacana!
well done, great videography & and choice of music, it was kinda mesmerizing/relaxing.
You just got another subscriber, thanks for making this video, keep up the good work, from El Paso Texas.
thankyou and what a great place to live
I seriously thought you had quit youtube. So glad to see your amazing videos once again!!
Not yet!
Best TECHINIQ for repair to rod guide. 👍👍
Wow, thanks!
Congratulações... trabalho perfeito...
Excellent work 👍
When fishing meets art.
New sub.
So amazing thank you for sharing my friend watching from Philippines ♥️
thank you for your service
Simplicity at its best. Tq
looking forward to the next video.
That's a great video welldone!!
Hope you will make more video's in the future!
I will try my best
@@PaulAdamsTheHandmadeFisherman Thanks and i will watch it!!! 🙂
amazing video and nice to see you again :)
wow just wow. I always see broken rods at the fishing pier that i go. Now im going to hold on to them and learn to fix them for myself
i still find broken rods sometimes even in the local lake, i have a bit of collection
Amazing work👍
Excellent video and completely!!!
Thank you very much!
Don't give up !!!!! I know you can do it!!!!!
Wow
Excellent work!!!!
Perfect Job, thank you 👍🏽
Краткость сестра таланта. Красава, всё по делу и без лишних, нудных и долгих слов👍
Someone sold a nice rod at a yard sale, I bought it, I didn’t notice one of the rings were broke, I finally got around to repairing it myself yesterday, my first time, I never used the epoxy brand I used before, man was it ever stink lol, I did the glue part outside but it was still very strong odour, anyways I will be casting today maybe. Thanks for the video.
Very nice!
Amazing video all around! Thanks…
thanks
Nice work, 👍 Thanks!
Class video great finish 👏
frankly, it's amazing.
Thank you.
Thank you very much!
The video put me to sleep it was so relaxing 😌
😴
Great video, thank you
Very good!👍
Wow very good and clear videos
Thanks a lot
I like the upside-down beer can epoxy dish!
Espectacular. Muy bueno 👏👏👏
What a pro work🔥
Well amazing my friend ❤
Thank you for sharing
Bonjour et un grand merci pour ces supers infos bien utiles Cordialement Patrick❤😂😊❤
Very nice... Master ! 😉
Good to know I have a few broke off on my fishing rod. Where can I buy the replacements? Thanks
Top job 👍🏼
Great work bro
Thanks 🔥
Magnífico trabajo🙌
When I was a Kid we just used Clear Fingernail Polish, Quick and Easy.
Ilmu yg bermanfaat tanks mas bro