I HOPE You're Not Making These BAITCASTER Mistakes
ฝัง
- เผยแพร่เมื่อ 29 พ.ค. 2024
- The baitcaster is one of the best reels to use in order to have full control over your bass lure. However, there are 3 big baitcast reel mistakes that you could be making!
SUPPORT MY FISHING APPAREL COMPANY:
Sun Shirts - finnfishing.com/collections/p...
Bass Hats - finnfishing.com/products/bass...
Fishing Gloves - finnfishing.com/products/fish...
T-Shirts - finnfishing.com/products/finn...
SUPPORT MY PARTNERS:
OMNIA TACKLE - rebrand.ly/OmniaTackle
CLEMONS BOATS - (419) 357-7042 (Tell Them BassFishingHQ Sent You!)
BOAT THINGS - (614) 895-2628 (Tell Them BassFishingHQ Sent You!)
MILLERTECH LITHIUM BATTERIES
Trolling Motor Battery - rebrand.ly/Trolling-Motor-Bat...
Cranking/Electronics Battery - rebrand.ly/Cranking-Electroni...
HUMMINBIRD - rebrand.ly/HumminBirdElectronics
MINN KOTA- rebrand.ly/MinnKotaMotors
PREMIUM PRO APP - rebrand.ly/Omnia-Premium-PRO
ARK RODS - rebrand.ly/6745e8y
WATERLANDCO - rebrand.ly/Polarized-Sunglasses
INSTAGRAM - Ty_Berger
There are a ton of different brands of baitcast reels on the market. Many of these reels are very similar so today I want to help you avoid some frustrating fishing by eliminate some baitcaster mistakes.
Baitcast reels really allow you to have control over your lure when you are fishing and they tend to manage larger line better than a spinning reel. That is why it is so important that you use them!
BassFishingHQ is dedicated to teaching people how to catch more and bigger bass. I will go over different bass fishing tips & techniques that will put more fish in the boat or on the shore. Whether you are just starting out or a seasoned tournament angler, my goal is to help you catch more bass.
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content each week! - กีฬา
![[UNCUT] รัฐสั่งหยุดปล่อยคลื่น! แต่หยุดพลังปะทุ “น้องหญิง” ไม่ได้ I คนดังนั่งเคลียร์](http://i.ytimg.com/vi/RmQh47eIiV0/mqdefault.jpg)
Thanks For Watching! Your guys and gals ROCK!
Cabin Fever Sale - rebrand.ly/SportsmanOutfitters
Bruin ELS Reel - rebrand.ly/zp1pbce
Bass Hat - rebrand.ly/2qf5uh5
Thanks so much I will never have backlash again will be posting a video on my fishing channel soon!.
Q
Fairy wand
@@ELFREQDJATM-FREQVIBR.ANDVlogs😊😊😊
Great information ℹ️ I have definitely decided to subscribe to your channel!! Thanks Cheers 🥂
I've found the best way to prevent backlash is to use a spinning reel.
Baitcasters are cool for throwing heavy things using a relatively compact package and that's about it.
🤣🤣🤣🤣🤣🎣🐟
So true lol
They have their place. Braid to leader is the best thing one can do. I’ve been using more spinning lately so I can throw smaller stuff.
Proceeds to bird nest spinner
Ok wow I’ve been practicing with a baitcaster for almost a year now, and I’ve watched a lot of videos and this might be the best. When you deliver us your “master class” lessons it’s really special
I really appreciate the kind words Richard, I put a lot of work into them so comments like this mean a lot
Good tips . Rather than using backing , if you fill your spool with the line you like , when you think its time to change your line , tie the end on another reel and wind it on that reel . This way the old used line is now on the bottom of the spool and you have fresh line on top .
❤❤❤❤❤❤❤❤❤❤❤❤😂❤❤❤
Excellent advice you don't get from most other channels and even local shop guys! I've just become more proficient with the baitcaster and found some of these tips on my own, but everything you talked about here will definitely help me. Especially using a inexpensive backing! Killer tip!
The breaks and tension and drag advice helped so much. I was getting rats nest every single cast and backlash way before I could get it anywhere near where I wanted it. Used your advice, went a little tight in that zone for the tension and now I can actually fish lol. So thanks a lot!
Birds nest*
Hey man.. a good set up helps a lot too. My first baitcaster was some clunker Shakespeare .. was awful and then I got a better one.. holy hell world of difference
@@calslovesnkmforlife5199 rats and birds nest’s look a lot alike.
Mine was a whistlin marmot nest. Twas big
@@name_less7687 I've got an older Shimano reel. It doesn't have the best capacity for line amount of test weight, but I'm within it's recommended line limits and it's not a bad reel.
Been fishing bait casters for about 45 years. I finally learned how to not get a backlash from trying different reels and adjustments. I found that setting the break on the middle, I can fine tune the tension knob on the right to get that perfect, long, no thumbing cast. My Tatatula’s I can cast them almost as far as my spinning rings and never need to thumb the spool. 90% of the pros I watch never thumb the spool. This is what took me most of my life to find out, even after trying and trying to fine tune the break system that seemed to have almost no effect.
Same here lol
Thanks for the heads up and saving me 45 years
…45 years, just spend the big buck and get a nice diawa and you won’t have to thumb it I’ve only been fishing them for 2 years and I never thumb it
I also learned without thumbing it tho so that pry makes a big difference
@@johnmatthew4732 they make a tatula that has a zero set tension spool, then you can just mess with the brakes….I’ve been fishing 2 years and I never thumb my baitcaster, brakes set at 3-7 out of 20 depending on lure size and wind, start at 10-12 out of 20 to learn without thumbing easier and work yourself down, and always remember you don’t have to whip your baitcaster has hard as you can if you want a longer cast just mess with the brakes it should be a smooth cast no baseball swings
Thank you! Just bought my first bait caster today. Looking forward to using it and your video helped me really understand the mechanics of it. Been using spinning reels all my life. Thanks for your video!
Definitely helpful, have only been fishing with some baitcasters for about after getting back into fishing after about 15 years and this is always a sticking point to figure out sometimes. Thank you.
Excellent video. I have been fishing for over 60 years and I'm always willing to learn something new.. You do a great job Explaining different things. This channel as well as tactical bassin and Matt Stephan fishing are my favorites. Straight forward honest explanations.
Thank you, this was massively helpful. Been using komodo for few months now, haven't had problems and none severe backlashes but still learning. Will try these tips asap!
Great info, spot on and you explain the mechanics of the way a baits density matters. Especially using a reel for multiple applications where the baits have different physics in the air.
This video was awesome. Especially the explanation of the brakes and spool tension. I've been having trouble with my BPS Sierra Tango bait caster but following this video helped a lot trying to get this thing set. Thanks and tight lines!
Brakes loose, tension loose, use your thumb. I’ve done the experimenting and this is hands down the best way to cast for distance. Skipping is a different beast.
Yup. Once you learn it and get good at it...
its all in the thumb
@@ronalddavis uhhhhh huh, bingo.
Hey Tyler that was a good video! One other trick after putting on the backing would be to take a 2 inch piece of electrical tape and tape down the backing connected to the tag end. Then put another 1 inch piece of tape onto the previous piece then put on your fluorocarbon line this way there is no knot for the new lineto bite into until it gets over top of that knot. This also helps the line sit into itself and fill the spool straight. Have use this trick all my life and have never been let down! Keep up the great videos
The visual representations you add in are so simple yet so helpful, great touch to the videos
One of the best explanation videos of a baitcaster that I have found. This is helped me to finally set up my baitcaster the right way. Thank you!
That's awesome stuff, Tyler. Been fishing with baitcaster for nearly 40 years. I have been using spool tension and brakes wrong the entire time. Appreciate the video, as always!
Same here, i was thought by a group of 15 semi pro anglers(they go to amateur tournaments regularly). They all use the wrong things lol. First, I'm confused why they who basically never use spinning reels, can get that wrong. Second, kind of impressed that they can cast easily with minimum breaks
Thank you for making this video! You’ve simplified the mechanics & physics to casting with baitcaster, learned few new things I’ll apply this season 🎣
After slowing, over the last 18mths working this out for myself,even the wind blowing front or back & making adjustments & weight of baits being used & watching,practising numerous vids & casts.. YOU have definitely confirmed what i was doing was correct. Thanks brother. For a while there i thought i was waayyyy off the pitch & ready to go back to spin. Enjoying my BC's & getting my head around them more & more...their F sick...👍🏼
Its all in the cast...you can throw your baits out like you'd throw a ball. Its the 'casting action' that beats spin hands.
down.
Cheers
Fluro
Excellent information. I can’t wait to start using these techniques. Thank you very much for sharing your expertise.
Awesome information! I’ve never heard this valuable information before. On thing I would HIGHLY recommend you do is learn a line-to-line knot like the double uni knot. This is a super simple and strong knot that I use to tie braid strait to my leader without a swivel. It is also what I use to tie my backing to my mainline. Thanks for the video!
i use a double uni for backing to main line and an fg knot for leader. uni for about everything else. double uni is a great knot.
Agreed, why tie a knot you know will break
I like how a loose reel feels, so I tend to only use braid to leader. One because braid lasts forever so its more economical for me, and two because line choice makes a huge difference in how easy it is to cast. With braid I run all my reels, whether magnetic or centrifugal, with the spool tensioner backed off so I have a tiny bit of side to side play, and just enough braking so it doesn't blow up immediately. However with fluoro, I tend to need quite a bit of spool tension to keep the line sitting properly on the spool.
This was a great video, I have trouble with my bait caster, I will be putting your tips into play this season. Thanks for the way you explain and talk about your tips.
This video is just what i needed to see. I waste line but it's due to backlashing trying to make long cast. Will be adjusting all my Lews and Pro Qulifiers this weekend. I'm glad I found your channel. Keep em coming.
Great video. I always thought the tensioner knob had to be adjusted so bait would fall at decent pace and hit the ground without causing a big overrun / backlash? .... I always use backer line as a bank angler. More often than not I’m casting at an angle along the bank or trying to flip / pitch out from over hanging trees where I can’t make an overhand or sidearm cast. Any time I get a new baitcaster I put a full spool of red label or trilene xl and work with that until I get comfortable with new real. Once I get a good feel for it, when the reel starts getting low I’ll strip it down to about a third full and then put on lines I like a bit better.
You thought correct. Ty is a little off on the tensioner. Should be set with each different lure weight. Lure hits the floor with no overrun. Try cheap braid for backing, see what you think. I sure hate to correct Ty. He has the best info. Best skipping I have ever seen. Tight Lines my friend
@@pauleyplay CCD
Thanks for these tips. I can never remember what to adjust based upon which part of the cast is having an over run. Now I know.
Thanks for watching, I appreciate it
I really appreciate the tips and technique videos you share. They have helped me become a better bass fisherman.
Excellent advice. Thanks for sharing.
Great stuff, Tyler...love the content and enthusiasm! I lost a big fish last spring because my drag was cranked pretty tight, but more importantly, I forgot to push my damn button!! Never did see the fish, but it dove under the boat and broke off... heartbreaking experience. I still haven't gotten over it! Gotta remember to push the darn button!! Thanks again.
I think we all have a few fish that will be on our mind forever :)
Awesome video, man! Great information for new anglers. Thank you.
You make some very good points, most of which I had to learn the hard way. So anyone watching this is lucky.
I would suggest that anyone relatively new to baitcast reel‘s, drop the word, “loose,“ from your mind.
Loose gets you into predicaments with a bait caster reel, when you’re not tuned in to them through experience.
Go to the tighter side of adjustments, just slightly, to get started - then work on easing tension.
I was very pleased to see your mention of backfilling the spool. Back in great granddad‘s day most reels were sold with a collet that attached to the spool to fulfill that role.
It has been around quite a long time, and it’s great advice.
My last recommendation is to use braid. I struggled in the beginning trying to use polymer lines, either monofilament or fluorocarbon. The line just seemed to flow better off of a rotating spool, and everything smoothed out when I began using braid.
Once the backing line is wound on, I lay a piece of black electrical tape across the spool, knot in the braid, and then wind the braid on top of that. This gives me a visual by which to gauge my line capacity.
Good vid.
Thanks
David
South Carolina
I was taught to tighten the tension knob, turn off the brakes, press the thumb bar and turn the tension knob slowly till the lure starts to fall, then put the brakes at 50%. I still get the occasional backlash.
No matter how you do it, there will always be an occasional backlash
Here to listen to Professor Berger
Lol....I just wish I could catch 14 pounders like Big Fish Anderson!
Explained very well ,for guys learning the bait caster!! Thanks 👍👍
Could have used this video when I first started using a baitcaster. Very informative and needed for anyone who wants to move to a baitcaster. Thanks. Enjoy the moments!
Great teaching video. I find it much simpler to set a light drag, and then add more with my thumb as needed, as when setting the hook. I strongly disagree with your simple backing knot. Why risk it breaking? You save no time at all when changing lines because you'll cut it anyway, and the idea of having a huge fish run you down to backing and then taking everything is dreadful.
Learn a double uni knot and you won’t have to worry about the knot breaking
@@lstarnes97 If you’re talking line to leader knots the FG knot is by far the best. It’s the strongest AND the thinnest one, but also the most time consuming to tie. However with some practice it takes maybe a few minutes to tie and it’s a knot that can go through the guides over and over without failing, so you can tie a 10ft+ leader if you really wanted to. I usually stick with about 7ft and just retie when I get down to about 4ft.
@@davideakin3372 oh yes the fg knot is superior but a lot more complicated. For tying backing to mainline both knots work just fine seeing as how you will rarely, if ever reach the backing, especially with bass fishing. But to tie the main line to the leader is a different story. the fg knot goes through the guides much smoother and it is a stronger knot. I was just recommending the double uni for backing to mainline because it’s easier and still strong
Tyvm for this video. I'm new to baitcasting. Got 2 half way through season. My cheaper one shimano caius, has the 6 brakes have to remove cover, always been a problem. I watched this twice and set my brakes the way you pictured and just took a cast off deck. What a difference! And will definitely use a backing when respool! Again tyvm
Great information Tyler. I have followed your advice and it has made a positive impact.
Thank you for this video - I bought one a few years ago, and was never shown what the different things did. This video explains exactly why I get backlash almost every cast. Can’t wait to change EVERYTHING!
So much valuable information!!! Thank you for the tips!!!
When I first started bait caster fishing were what you mentioned I had to learn to leave the rate of decent or drop at a level so that the lure would not drop too fast and also set the drag depending on the weight of the line. Once I got the handle on it game on.
I am in the process of purchasing a new baitcaster reel, so these tips are so handy. Thank you for passing on these valuable tips 🙏
I love this video because I love my bait caster but still learning it and this is very helpful I'm saving it to my saved videos thank you for all your videos full of knowledge thank you again
I'm learned to use baitcasters from TH-cam. This one video made me 100% better. Very well put together and thought out. It actually shows you why and how and that's how I learn. It's not just a do this video.
i absolutely love bait cast reels i have a small spinning cast as well i'm definitely going to try some of those adjustments, i think it's going to help big time with some of the back spin normally i just control it with my thumb, i gotten use to doing it that way but this is going to help a lot thanks.
Great explanation and breakdown, thank you!
Helped take some of the guess work out of when and how to make adjustments. Great advice and easy to understand thanks!
This is GREAT INFO THANKS! Im buying my first Bate caster this season!
1st time visitor and now a sub. I like your non-pretentious, straight forward style. The clear as day video is a bonus.
Excellent, needed this thank you.
Been fishing my whole life but just started using baitcasters and this video has alot of great information! Thanks bro keep posting and I'll keep watching. Fish on!!!!!
I am just getting started using bc and was looking for a video with helpful tips. Yours was really good and helpful in understanding the different brakes! Greetings from Germany.
Thank you for a very simple explanation and very useful tips
Best bait caster adjustment video I’ve ever seen. Thank yoU❤❤❤
Great tips. I really appreciate your tutorials.
Great information, just started with a baitcaster thank you 😊
Thanks for the information. It was very helpful to me.
Fantastic break down!! Keep up your great explanation 👍
Once again, you’ve provided a really helpful video. Keep ‘‘em coming. And THANKS Joe M
Great video. Love the backing with old or cheap fishing line tip. 👍
Really the video i was looking for, thank you for the very detailed explanation :)
Very useful info 👍🏼 Thanks
Awesome advice thanks for the lesson
Thank you great information...I am definitely guilty of not using the tension knob and brake correctly....
been fishing with a baitcaster since I was a young kid and I always adjust the spool tension to match every bait ive used. Gonna try your advice next time out. thanks for the video
Awesome vid, new to baitcasters, definitely cleared some things up for me so thank you
Like your videos. I got several new bait casters recently I had assumed came with brakes and also given some antique heavy surf reels made before magnetic brakes were invented. I was forced to really learn how to use the spool the tensioner knob. The rest was old school remembering to use my thumb to prevent backlashes. Appreciate the advice about properly setting the drag which can easily lead to losing fish. I made the mistake of free spooling large live bait when a huge fish hit so hard I had an instant backlash breaking my line. Not sure if the tensioner or brake would have helped that situation. I'll go ahead and attach my backing with a strong knot that will go through my rod guides easily since I often fish fast running rivers and salt water that hold huge fish. Since most even heavy duty reels won't have a drag greater than 20 lbs I don't see the need for any lines heavier than 30 lbs. I'm dropping braided lines for general fishing and going back to mono which I have more confidence in.
great video and info, good for all fisherman to go by. thanks for that video. you shared.
Great information as always, keep it simple!!
That was a really good video. Well explained. Good job. Thanks.
Thank you for the tip on the fishing line. I've always thought that it was a waste of money and line. I've learned something new.👍
Learned a bunch here. New to baitcasting. Thank you.
Excellent video! Learned a lot! Thanks for sharing!
Great tips! Thanks bro 🙏🏼
Great job thanks I like you watch your videos because they are so educational and help me fish better and improve my fishing
Thanks for the great information!
This was so helpful, thank you!
Super helpful being I’ve been using a bait caster for about a month now thank you!!
Been using spinning reels for the last 40 years. Am just starting with baitcasting. Have a Kastking Sparticus and 2 Pflueger Presidental XT’s. This was a very down to earth presentation.
I like your explanation. I always hear people saying to tension until you get a slow drop and then adjust the brakes. I backlash a lot more with this. I hardly ever backlash with loose tension and brakes set at or right below 50%.
Some casters, like my concept a2, I keep my brakes set at 1, 2 for a windy day
Thanks👌😁 I took your advice and have impressed with my improvements
My new mantra is when Ben Nowak speaks… listen!! Signed on as a sub after hearing Ben’s rec of you to Alex Rudd last week, and man, am I going to learn a lot from here!! My baitcasting needs work, and these are just the factors I need to have running through my head as I try and improve. Looking forward to going back and seeing what I’ve missed in your past uploads, and to keep consuming what you share in the ones to come. Many thanks!!
Good info. Thank you.
Great detailed Information my friend thank you.
Just got my first baitcaster today and this video is exactly what I needed! Thank you!
I mainly fished spinning reels my entire life. 1 time I was attempting to use a baitcaster and I bird nested and the line ended up tangled up in the trolling motor. Pawpaw told me put it down lol. I did for years. I never really knew how to adjust the brakes and all. My bird nesting has decreased DRAMATICALLY since watching this video and applying what I learned. I have fished once with my baitcaster since my first time watching this video. The way you teach is amazing and I look forward to every video you put out! Who knows, I may see you on a tourney 1 day!
Very informative video, thanks for taking the time to make it.
Great Info Thanks
I really don’t think you understand how helpful this video is. No other video out there explains it like you, thank you so much.
Thanks dude
@@BassFishingHQ You bet, you’re amazing.
Excellent information Tyler it will be put to good use! Thanks
Thanks for always watching Scott
I have been using the Johnny Morris Signature baitcast combo. So far, so good. I appreciate this video to hone my casting skills. Thanks for sharing!
Just got my first baitcaster. This is exactly what I was looking for in respect adjusting brakes vs. spool tensioner.
Great video on the basics of a baitcaster. I’ve already shared it on my Facebook group page. Great stuff
I appreciate the share Chris! It means a lot!
This helped so much 😮😊 thank you!
This is really weird; I was just watching that video from last year and this new one comes up. Great stuff as always. That skipping video is absolutely one of the best teaching videos on the subject. Most skipping videos are just show off stuff without any real substance. Today's video is equally informative. Keep up the great work. Thanks
Thats awesome man! Thanks for the kind words and thanks for watching the videos!
Excellent video! I’ve been using baitcasters since I was just a little squirt. Out in the ocean on my daddy’s boat sometimes it’s what I had to use so I had to learn or not fish and I was going to fish. That was a good way to explain the spool speed knob for adjustment. I do that a little different but this is a good way to do it. I’ve been setting my break wrong according to this video. So I’m going to try this and I’ll bet it works out. I am a lot more accurate with a baitcaster than a spinning reel and I feel like I get a lot more distance as well. Especially the low profile with the brake setting. I also agree with the drag setting. I only pond fishing anymore since I’ve got rid of my boat so I only use 2 rods. Both I keep 30lb braid and mostly fluorocarbon leader unless top water I’ll use mono. Since braid don’t stretch at all I will set my drag maybe 2 clicks light but just enough to keep from breaking my leader and when I’m fighting a fish I’ll hit my release button and manually do the drag like you suggest. Drag and braid don’t work good together in my opinion. And I only do this when I’ve got a pretty big fish on. Not because I’m afraid of breaking my line but pulling the bait out of its mouth. Depending on what I’m using mostly I use 17 lb leader. Thanks for the tips!
Great video. Very informative.
So helpful. The alternative is a dc model though, I recently got one and theyre extremely hard to get backlash on, despite the price they're so kind to beginners
Seriously thank you for this video I am completely new at this real and I'm learning and I truly mean is from the bottom of my heart thank you for this video it truly has helped me truly understand how to operate this piece of machinery lol thank you and have a blessed day everyone