Thanks - it works! I just repaired my 9' fly rod with a break in the first section. Had to find something thincker than a nail to fit but it seems to work well.
Just done this today. only thing I done different is put a coat of clear over the nylon and cured it under a uv light .Turned pretty nice glad to have my rod back .
Sir I HAVE MAD RESPECT FOR YOU. I BROKE MY ROD TIP HEADING OUT THE DOOR FOR A TOURNAMENT THIS WEEKEND I COULD CRY. I SAW YOUR VIDEO AND WENT TO WORK. I HAD A MICRO ROD YOU KNOW REALLY THIN AT THE TOP. I GOT A SHAKEYHEAD HOOK THAT WOULD FIT CUT IT AND WENT TO WORK. I FEEL MUCH BETTER NOW. YOUR VIDEO SAVE MY HOME BECAUSE IT WAS GOING TO HELL TO TALK TO ME FROM NOW TO THE WEEKEND 😆 🤣 😂 😹 😆 SO GLAD GOD LEAD ME TO YOUR VIDEO AND TO NEVER GIVE UP. THANK YOU 😊 🙏 😊 🙏 😊
Good Evening My Friend blueparay, Thank You for your detailed video on "How To Repair A Broken Fishing Rod." I to have experience a broken rod or two in my 35 year quest in fishing multiple spicese of fish! I to once implied the same techinque to repair a broken rod that a BEST FRIEND gave me. 🙂I Treasure the fact that YOU took the Time and EFFORT to Divise such a Detailed Video. Thank you once again my Fishing Friend for Being So Understanding and Compassionate for Our Sport of Fishing and the Millions of Viewers that watch Your Program! You are a TRUE Inspiration to US ALL!! 🙂MAY GOD "BLESS U & U'r Familiy! Sincerely, Mr. Carl Joseph Gwizdala aka "DESPERADO." 🙂
I used fiberglass sticks. They sell them in different sizes at Harbor Freight. $8 for a small pack. Worked perfectly with thread wraps and Epoxy. Now time to go test it out on some big Pike 😎🤙🏽
I've thoroughly enjoyed your knot tying videos!😊 I started building rods (Professionally), in mid 70s (I think 1976), and I don't mean building a fly rod, as those are ridiculously easy to put together!! I'm talking about boat rods with roller-guides and pack-rods (4 or 6 piece high quality rods), out of a 1 Piece Blank, meaning that I had to make my own ferrules!! And then I'd do anything from "perfect" Half & Half Diamond wraps that took 8 to 10 hours non stop!! By half and half, I mean half the Diamonds would be one color and the other half another. And many more like the U.S. flag with the stars and all, or Eagles etc. and it would take many wraps of thread to create. At any rate, the rod with the Nail would have one heck of Dead Section!! This of course would be no problem with even a Trophy Bass, but certainly not with a Big Steelhead or any fresh Chinook/King Salmon (fresh out of the Pacific Ocean)!! I still catch a good number of Kings going to 40 pounds or larger!! Again I can land any Bass with just about any rod or hand-line!! Someone else mentions the use of broken rod pieces, which makes a lot more sense!!
I'm wanting to make a 1 piece rod into a 3 piece and I was brainstorming ways to make it fit into itself, it's hard to find info online about it that I understand. Maybe you can link me a video to help. I was just wondering if using apoxy and peices of another blank to make a stopper for how far the peice will insert and using 20lb braid+apoxy to keep the blank from splitting out under load bc I'm going to need to do significant stock removal to the ID on the female end for the male end to fit. Is the male end filled with fiber/apoxy or is it just capped off. I have so many questions about how a broke 22 year old can make ferrules in his garage but I doubt you'll see my questions bc your comment is a year old , worth a try tho lol
Awsome job and thankyou for the tip as I got a awsome shimano rod and reel for Xmas and snapped the end off trying to land a big flathead so much appreciated sir 🙏
I've fixed a couple of fly rod tips in a similar way. Since the rod is very narrow at the tip, a 2" sewing needle works well as the insert (you might need to clip off the eyelet). Sewing needles seem to have enough strength and stiffness, plus you can find one in a diameter that will fit snug enough. Alternatively, you can get loop end wire shafts from a lure making supply store which are made from stiff, springy steel (I used .035"). Also, you'll need to add at least 1 but preferably 2 sewing needles (or wire shafts) on the outside of the break as splints. Glue in the insert then wrap the splints and spread a thin layer of epoxy over the threads. I use dental floss because its strong and flat. Waxed or unwaxed floss works as long as you coat with epoxy. Put the splints on the sides of break and not along the top/bottom. This way there is less of a bump along the bottom where the fly line runs. I have mixed results as to whether the action and accuracy of the rod is affected with dry flies (I notice no issue with nymphs) but at minimum you can fish until you order a new tip and then you'll always have a backup tip.
Thanks its happened to me so many times and I would just trash it or in my boat getting snapped on brush going to a favorite spot and bam . Now I'll put this in my tackle box, thanks again.
Я много лет занимаюсь ремонтом удилищ. Мой совет- ни в коем случае не пытайтесь отремонтировать бланк так, как показано здесь, колено будет в дальнейшем расщеплено в месте стыка. Внутреннюю вставку следует сделать из того же материала, что и удилище. Склеивание лучше выполнить эпоксидным клеем, супер клей , со временем становится хрупким и выкрашивается . После того как вы соединили поломанные части, нужно демонтировать кольца на бланке выше места перелома. Подобрать кусочек какого либо колена от удочки, которое плотно оденется на поломанное удилище в месте склейки. Достаточно трубки длинной 6-10 см.сажаем её на эпоксидку. По краям трубочки делаем нитяные бондажи и покрываем их эпоксидкой. Устанавливаем на место кольца. Ремонт окончен. Подмотку колец можно производить обычной ниткой, использовать для этого плетёнку нет смысла. Момент и подобные ему клеи для работ по ремонту удилищ не годятся.
Серьезно? Надо моему спиннингу об этом сказать, что уже 3 года работает, отремонтированный именно так. Видео не идеально. Супер-клей нужен хороший, гелевой консистенции, стержень дб обработан на концах (закруглен). Вместо нити, используем супер-клей + сода. Финальная обработка. Спасибо.
today my fishing rod was broken, it was very similar to the broken position like in the video, now I found this video as a solution, thank you very much
just bought a BNM super sensitive and broke first time I used it. will try to take it back but if not this is a super solution. will use epoxy instead of super glue
_Solid metal placed in the rod can make the part on the rod connection stiff and easily broken due to strong pressure by the fish, i used a fiber stick from amazon for only 2 dollars for 100 cm_
Outstanding video! worked great! my fly rod is good as new after my wife put up the window on it. I used a brad, which I filed to a taper, and JB ClearWeld. Upholstery thread, black. Thank you, thank you.
I just bought a rod online that showed up busted like this. I was going to just return it, but I think I'll consider it an investment in self sufficiency and just go ahead and figure out how to fix it instead. Thanks for the inspiration.
Muito bom..estou com uma quebrada...pensei em fazer a mesma coisa...a diferença é que quebrou na parte mais baixa é grossa...mais o processo é o mesmo...valeu
If needs must it’s a solid repair but it would create a flat spot in the blank and affect the action of it when put under strain. I cannot fault you for saving your rod though👍
I’ve used a piece of another broken rod to insert as the splint between the broken pieces or have slid the broken pieces into the splint instead of using a nail. When gluing the pieces together with super glue, if you sprinkle baking soda into the wet super glue it will instantly set up as hard as a rock and fill the gaps between the rod pieces. I also use 2-part clear epoxy on the rod wrap threads instead of super glue. I have also shortened the rod until I got the lower section large enough for the broken tip section to slip inside it before gluing.
I have several pieces of broken rods that I save to get a good fit with a taper like the rod I'm repairing . I use fine steel wool to ruff the rod before applying epoxy at the gap and to cover the thread . Great job ....looks like new ,and actually is stronger than new .
I do the same using rod repair thread and also just ordinary polyester sewing thread as well. I have bought carbide rod pieces at 1.5mm and hollow carbide tubes at 2.00 and 2.3 mm using them to make rod tip repairs. Turned out pretty good.
I really wish I would have known this technique many years ago. After coming back from a bass fishing trip to Florida I was unloading my boat at home and my favorite rod had it's tap broken off buy the screen door closing too fast. I had tens if not even hundred of thousand cast on that rod. It was so old that they no longer made it so I could not replace it.
I hope it wasn’t a $400 rod, like the one I broke the top off of in 2 places, before I’d used it for a month! Or the $300 rod I broke in a car door a month later. Lessons learned!
Good idea...I have an old rod which I loved, but got broken by a friend accidentally stepping on it. He bought me a new rod, although it's not the same as my old favourite. I might give this a go, although it may affect the action of it. Worth trying though. 👍
who hasn't found a discarded broken rod along the shore? I always gather the tip end to use sections as an insert instead of a nail. Strength is there plus the flex.
Thanks a bunch. Just broke my favorite rod, hiking through heavy Forrest, and brush. I was crushed. Jumped on TH-cam, and found this simple fix. Even looks like good meditation. But can you tell us what kind of string you're using when you wrapped the black string around it, and heat shrink it? That'd be awesome.
You can use a small diameter cord, thread, braid... I recommend nano cord Paracord .75mm This stuff is strong and has a breaking strength of around 36lbs.
He’s not heat-shrinking, he’s just burning the fuzz off of the thread for a smoother finish when he puts the glue on. The other thread is just a different color.
That is basically what I do to repair a break but I use a fibreglass piece off another broken rod & glue in the break. I bind over it & then if the break is close to a runner I’ll remover the runner & bind the runner in place over the break. Been successful repairs from beach rod to small spinning rods. Curious as to what glue you use here. I’ve been using 24/hr Araldite. 👍🏻👍🏻🇦🇺
I would personally use fiberglass then epoxy that in before wrapping, something as rigid as metal seems like a bad idea in a rod and would really screw up the proper action and just lead to it breaking again.
show de video, ótimo. Qual a bitola de de multifilamento você usa para fazer o remendo? Esta cola da finalização sobre a linha é de secagem rápida, tipo bonder?
Гвоздь это конечно круто!, долго не протянет, вместо гвоздя нужно(желательно) использовать гибкую вставку, например от сменных вершинок, живучесть повышается.
Я вообще внутрь оправку из плотной бумаги, пропитанной быстросохнущей эпоксидкой, вставляю. А когда схватится - снаружи углетканью, опять же на эпоксидке, сверху приматыааб скотчем. Потом скотч срезаю, и зашлифовываю наждачкой. Получается незаметно, и крепко, и вес и строй практически сохраняется.
Гвоздь, как мне кажется, все-таки надежней - в этой части лучше, что бы изгиба больше не было вообще. Но, вот края гвоздя бы сделал максимально шаровидными, что бы не было места концентрации усилия об точечное место в виде заусеницы. А еще, неплохо бы, чтобы до и после гвоздя какой-нибудь наполни тель в виде герметика был.
@@andreykalita1205 в районе гвоздя (где он заканчивается) будет новая поломка. Я так пытался ремонтировать бамбуковые удочки, когда мне было 12 лет. После того, как подрос, понял, что необходима трубка снаружи.
I use a 6 to 7 inch section of a. bicycle tire spoke. So much more effective and longer giving more support to the fractured area. My dad taught me this, decades ago.
the materials that are used is standard super glue and nylon thread (fishing line). the lighter is supposed to shrink the thread hot air blower will do as well. good luck
same it happened when I was taking algae off of the rod and then I heard the snap noise and a bunch of tension released form the line and the rod, I looked at my rod and a foot of the rod came off and I just thought "there is no way that just snapped my rod."
Brought my 4 year old with me to the river, used the same rod since I was 16, bought a new one for bobber and egg fishing for salmon nicest rod I've had a nice 9'6 okuma guide select pro $200 or so...stepped on 😔
Using a nail to fix a broken rod section will destroy the action of that rod, better to use a section of another broken rod epoxied in place to join the two pieces, epoxy is more flexible than superglue which will eventually break, you can also use a piece solid fiberglass from a quiver tip to repair sections that brake close to the top eye which are too narrow to fit a section of hollow rod inside.
@@alfredliggins8510 then you should just use an inch thick stick for a rod with some baler twine tied on the end for line, a bent safety pin for a hook and a chunk of roofing lead for a weight.
Если уже таким способом ремонтировать то хотя бы для приличия края у гвоздя на наждаке закруглил бы ато острые углы при нагрузках со временем расколят стеклопластик а по нормальному надо бы стеклопластик пустотелый вставлять внутрь ИМХО :)
I broke mine in a car door shortly after building it. It was the first fly rod I ever built. I came up with the same idea but I used epoxy at the time many years ago. Thanks
I'm the kind of person that sees value in everything. And I also get a sentimental value from things I repair. Today I broke a rod like an idiot and I really want to buy what I need to repair it. Seeing this done with what I believe to be a watery cyanoacrylate, some thread and a metal is reassuring. Unfortunately my rod is in a bad way, it needs a guide and has two breaks in the tip. I think it's a little out of my hands because it broke in the first place because I tried to shortcut life and use a stone bench grinder to attempt to remove a broken guide, slightly scratching a little deep in the the rod creating a weak point where it snapped, and somehow snapped like 10cm down the rod in another spot. It's like my only decent rod too I'm so sad..
Идея правильная - воплощение никс. Внутрь по диаметру стеклопластиковый кусочек 5-6 см на клее супер-гель, выровнять соосность без спешки, клей позволяет. Сверху шину из полосок 1-1,5 мм ( с кусочка старой удочки), длинной 5-6 см на клею. Сверху бандаж из капроновой нитки, пропитать клеем 505 секунда (хорошо пропитывает).Все. Далее на вкус - клеем двухкомпонентным 5-ти минутка. Для красоты и аккуратности.
I have a 4pc eagle claw pack rod that has two splices and the handle replaced because the screw ring jammed so if you count the pieces off three other poles it's now a 7 PC gotta luv it I keep it one of those foam six pack carriers like a godess,,!
Mantap om sangat membantu.. Dulu saya punya joran patah tp di buang aja karna gk bisa n gk tau gmn caranya 😁 Sekarang liat video ini jd nyesal saya knapa dulu di buang jorannya huhuu
wah sayang sekali om, padahal joran patah masih bisa di manfaatkan, masih ad beberapa tips lg memanfaatkan joran patah, nnti klo ada waktu lowong saya buat video nya 😁
Fishing Rod Strength Test After Repaired :
th-cam.com/video/hS62WjzBrjU/w-d-xo.html
Ñ
@NORBERT LUKACS ㄱㄱ
Ч 3ешлббб
==)
1
@NORBERT LUKACS elimene
Thanks - it works! I just repaired my 9' fly rod with a break in the first section. Had to find something thincker than a nail to fit but it seems to work well.
Just done this today. only thing I done different is put a coat of clear over the nylon and cured it under a uv light .Turned pretty nice glad to have my rod back .
I was so upset when my new fly rod snapped today. This is is great! Beautiful video! Thank you
Thank you for this. You’ve saved my old fly rod.
Worked beautifully sir, even for an amateur like me! Thank you for sharing!
What kind of string did you use to do the wrap? Can I just go to my local sporting goods store, and they'll know what to sell me?
Sir I HAVE MAD RESPECT FOR YOU. I BROKE MY ROD TIP HEADING OUT THE DOOR FOR A TOURNAMENT THIS WEEKEND I COULD CRY. I SAW YOUR VIDEO AND WENT TO WORK. I HAD A MICRO ROD YOU KNOW REALLY THIN AT THE TOP. I GOT A SHAKEYHEAD HOOK THAT WOULD FIT CUT IT AND WENT TO WORK. I FEEL MUCH BETTER NOW. YOUR VIDEO SAVE MY HOME BECAUSE IT WAS GOING TO HELL TO TALK TO ME FROM NOW TO THE WEEKEND 😆 🤣 😂 😹 😆 SO GLAD GOD LEAD ME TO YOUR VIDEO AND TO NEVER GIVE UP. THANK YOU 😊 🙏 😊 🙏 😊
X 2
It wasn’t an extra repair I wish I had seen earlier over the years thank you for posting that
Good Evening My Friend blueparay, Thank You for your detailed video on "How To Repair A Broken Fishing Rod." I to have experience a broken rod or two in my 35 year quest in fishing multiple spicese of fish! I to once implied the same techinque to repair a broken rod that a BEST FRIEND gave me. 🙂I Treasure the fact that YOU took the Time and EFFORT to Divise such a Detailed Video. Thank you once again my Fishing Friend for Being So Understanding and Compassionate for Our Sport of Fishing and the Millions of Viewers that watch Your Program! You are a TRUE Inspiration to US ALL!! 🙂MAY GOD "BLESS U & U'r Familiy! Sincerely, Mr. Carl Joseph Gwizdala aka "DESPERADO." 🙂
I used fiberglass sticks. They sell them in different sizes at Harbor Freight. $8 for a small pack. Worked perfectly with thread wraps and Epoxy. Now time to go test it out on some big Pike 😎🤙🏽
that is a very practical tip and solution TY
I've thoroughly enjoyed your knot tying videos!😊 I started building rods (Professionally), in mid 70s (I think 1976), and I don't mean building a fly rod, as those are ridiculously easy to put together!! I'm talking about boat rods with roller-guides and pack-rods (4 or 6 piece high quality rods), out of a 1 Piece Blank, meaning that I had to make my own ferrules!! And then I'd do anything from "perfect" Half & Half Diamond wraps that took 8 to 10 hours non stop!! By half and half, I mean half the Diamonds would be one color and the other half another. And many more like the U.S. flag with the stars and all, or Eagles etc. and it would take many wraps of thread to create. At any rate, the rod with the Nail would have one heck of Dead Section!! This of course would be no problem with even a Trophy Bass, but certainly not with a Big Steelhead or any fresh Chinook/King Salmon (fresh out of the Pacific Ocean)!! I still catch a good number of Kings going to 40 pounds or larger!! Again I can land any Bass with just about any rod or hand-line!! Someone else mentions the use of broken rod pieces, which makes a lot more sense!!
I'm wanting to make a 1 piece rod into a 3 piece and I was brainstorming ways to make it fit into itself, it's hard to find info online about it that I understand. Maybe you can link me a video to help. I was just wondering if using apoxy and peices of another blank to make a stopper for how far the peice will insert and using 20lb braid+apoxy to keep the blank from splitting out under load bc I'm going to need to do significant stock removal to the ID on the female end for the male end to fit. Is the male end filled with fiber/apoxy or is it just capped off. I have so many questions about how a broke 22 year old can make ferrules in his garage but I doubt you'll see my questions bc your comment is a year old , worth a try tho lol
This was ridiculously therapeutic haha. I really appreciate all of this!
Awsome job and thankyou for the tip as I got a awsome shimano rod and reel for Xmas and snapped the end off trying to land a big flathead so much appreciated sir 🙏
Check to see if there’s a replacement on the warranty before you go trying to fix it broken is broken.
Just had a rod tip break the other day and then found this. Providence! Easy to understand. thanks.
I've fixed a couple of fly rod tips in a similar way. Since the rod is very narrow at the tip, a 2" sewing needle works well as the insert (you might need to clip off the eyelet). Sewing needles seem to have enough strength and stiffness, plus you can find one in a diameter that will fit snug enough. Alternatively, you can get loop end wire shafts from a lure making supply store which are made from stiff, springy steel (I used .035"). Also, you'll need to add at least 1 but preferably 2 sewing needles (or wire shafts) on the outside of the break as splints. Glue in the insert then wrap the splints and spread a thin layer of epoxy over the threads. I use dental floss because its strong and flat. Waxed or unwaxed floss works as long as you coat with epoxy. Put the splints on the sides of break and not along the top/bottom. This way there is less of a bump along the bottom where the fly line runs. I have mixed results as to whether the action and accuracy of the rod is affected with dry flies (I notice no issue with nymphs) but at minimum you can fish until you order a new tip and then you'll always have a backup tip.
You really saved me man i’m gonna do this
Vấn dề là ko đút lại đc đầu cần thôi... độ chắc bền thì ok
That's cool I used the nail and different glue about 30 years ago but it works. Still have the rod! It sucks to break a $100+ rod and just let it go.
Thanks its happened to me so many times and I would just trash it or in my boat getting snapped on brush going to a favorite spot and bam . Now I'll put this in my tackle box, thanks again.
Going to watch this on repeat while I fix my fly rod. Thanks mate!
Я много лет занимаюсь ремонтом удилищ. Мой совет- ни в коем случае не пытайтесь отремонтировать бланк так, как показано здесь, колено будет в дальнейшем расщеплено в месте стыка. Внутреннюю вставку следует сделать из того же материала, что и удилище. Склеивание лучше выполнить эпоксидным клеем, супер клей , со временем становится хрупким и выкрашивается . После того как вы соединили поломанные части, нужно демонтировать кольца на бланке выше места перелома. Подобрать кусочек какого либо колена от удочки, которое плотно оденется на поломанное удилище в месте склейки. Достаточно трубки длинной 6-10 см.сажаем её на эпоксидку. По краям трубочки делаем нитяные бондажи и покрываем их эпоксидкой. Устанавливаем на место кольца. Ремонт окончен. Подмотку колец можно производить обычной ниткой, использовать для этого плетёнку нет смысла. Момент и подобные ему клеи для работ по ремонту удилищ не годятся.
Серьезно? Надо моему спиннингу об этом сказать, что уже 3 года работает, отремонтированный именно так. Видео не идеально. Супер-клей нужен хороший, гелевой консистенции, стержень дб обработан на концах (закруглен). Вместо нити, используем супер-клей + сода. Финальная обработка.
Спасибо.
Damn! I wish I saw this video about a 100 broken rod’s ago! Awesome! Thank you!
today my fishing rod was broken, it was very similar to the broken position like in the video, now I found this video as a solution, thank you very much
just bought a BNM super sensitive and broke first time I used it. will try to take it back but if not this is a super solution. will use epoxy instead of super glue
_Solid metal placed in the rod can make the part on the rod connection stiff and easily broken due to strong pressure by the fish, i used a fiber stick from amazon for only 2 dollars for 100 cm_
Can you provide a link to it
Link of it ?
I don’t see it either
A steel from coil spring do the same, must be flexible and that is it . The glue must be also flexible . Technically speaking .
Thanks for the Intel
Outstanding video! worked great! my fly rod is good as new after my wife put up the window on it. I used a brad, which I filed to a taper, and JB ClearWeld. Upholstery thread, black. Thank you, thank you.
This is a really good video. Very informative. Thank you
Mantap boss... untung joran saya yg patah belum saya buang, nemu solusinya sekarang, terima kadih boss🤝🤝
Mandou bem amigo
ja sei que tem jeito👏👏👏👏👍👍
Gostei muito do truques, mais uma que eu a prendi, porque sou um pescador e gosto de coisas novas parabéns muito bom
I just bought a rod online that showed up busted like this. I was going to just return it, but I think I'll consider it an investment in self sufficiency and just go ahead and figure out how to fix it instead. Thanks for the inspiration.
Cách sửa chữa cần bị gẩy rất hây cảm ơn bạn đả chia sẻ video cho những cần thủ có cần câu bị gẩy👍👍👍
Muito bom..estou com uma quebrada...pensei em fazer a mesma coisa...a diferença é que quebrou na parte mais baixa é grossa...mais o processo é o mesmo...valeu
If needs must it’s a solid repair but it would create a flat spot in the blank and affect the action of it when put under strain. I cannot fault you for saving your rod though👍
Really nice way to fix your rod.. thank you for sharing 🎣
Permisi...Alhamdulillaah tetima kadih banyak kawan dudah berbagi Ilmu...semoga manfa,At .....suksrs selalu..👍👍🙏
Muito bom, nunca é demais aprender novas técnicas pra arrumar uma vara de pescar 🎣
What kind of glue?
I’ve used a piece of another broken rod to insert as the splint between the broken pieces or have slid the broken pieces into the splint instead of using a nail. When gluing the pieces together with super glue, if you sprinkle baking soda into the wet super glue it will instantly set up as hard as a rock and fill the gaps between the rod pieces. I also use 2-part clear epoxy on the rod wrap threads instead of super glue. I have also shortened the rod until I got the lower section large enough for the broken tip section to slip inside it before gluing.
The glass/carbon fiber rods you´d normally use to build kites should work well, too.
The Baking Soda trick is amazing. Including, in model making.
Ро
I have several pieces of broken rods that I save to get a good fit with a taper like the rod I'm repairing . I use fine steel wool to ruff the rod before applying epoxy at the gap and to cover the thread . Great job ....looks like new ,and actually is stronger than new .
I do the same using rod repair thread and also just ordinary polyester sewing thread as well. I have bought carbide rod pieces at 1.5mm and hollow carbide tubes at 2.00 and 2.3 mm using them to make rod tip repairs. Turned out pretty good.
Definitely going to try. My rod broke lower down on though but still I'm going to get it done. Thanks for the info
Terimakasih bos... Sangat membantu tutorialnya... Pas joran kesayangan patah 😥
I really wish I would have known this technique many years ago. After coming back from a bass fishing trip to Florida I was unloading my boat at home and my favorite rod had it's tap broken off buy the screen door closing too fast. I had tens if not even hundred of thousand cast on that rod. It was so old that they no longer made it so I could not replace it.
Sorry for your loss
RIP
Rest In Pieces
I know the feeling mate, I had the same thing happen only the door was timber.
@@mickpittman4244 Или дверь автомобиля, как у меня))
I hope it wasn’t a $400 rod, like the one I broke the top off of in 2 places, before I’d used it for a month! Or the $300 rod I broke in a car door a month later. Lessons learned!
Bom dia parabéns bela explicação uma ótima dica como restaurar uma vara de pesca
SERÁ QUE É SUPER BONDE?
A good valuable piece of knowledge. Thank You. I am more happy that I got an Ugly Stick coming though.
Hi,great video,after putting the thread on,you heated it up with a lighter. Did you put a heat shrink tube over the thread?
Good idea...I have an old rod which I loved, but got broken by a friend accidentally stepping on it. He bought me a new rod, although it's not the same as my old favourite.
I might give this a go, although it may affect the action of it.
Worth trying though. 👍
Try a solid fiberglass rod, should mess with the action less.
Елт
Great video, but you should list all the things you used for the repair and where to get it.
Hebat dan luar biasa Tutorial penyambungan jorannya yang kondisi patah, sukses selalu kawan 👍👍👍🙏
Phenomenal Job Absolutely 💯 % Thankyou
who hasn't found a discarded broken rod along the shore? I always gather the tip end to use sections as an insert instead of a nail. Strength is there plus the flex.
Better off with a piece of fiberglass or a bamboo it's better and gives more flexibility.
I thought that was a good way to fix the rod I think I bought one repaired tha way we will see how it works
Parabéns boa dica ..
Thank you! It works! 🙂👍👍
What type of thread did you wrap it with? And was that the same glue you put on the outside or something different? Thanks
Excelente, a minha qbrou. fiz a mesma coisa e está belezinha. Já peguei muitas tilápias.abrç..
SERÁ QUE É SUPER BONDE?
Thanks a bunch. Just broke my favorite rod, hiking through heavy Forrest, and brush. I was crushed. Jumped on TH-cam, and found this simple fix. Even looks like good meditation.
But can you tell us what kind of string you're using when you wrapped the black string around it, and heat shrink it? That'd be awesome.
You can use a small diameter cord, thread, braid...
I recommend nano cord Paracord .75mm
This stuff is strong and has a breaking strength of around 36lbs.
Р
He’s not heat-shrinking, he’s just burning the fuzz off of the thread for a smoother finish when he puts the glue on. The other thread is just a different color.
감쪽같네요. 저도 낚시대. 부러젔었는데
좋은 팁이네요. 잘활용해보겠습니다^^
Vraiment inspirant, beau travail...MERCI !! Very inspiring, nice work...THANKS !!
That is basically what I do to repair a break but I use a fibreglass piece off another broken rod & glue in the break. I bind over it & then if the break is close to a runner I’ll remover the runner & bind the runner in place over the break. Been successful repairs from beach rod to small spinning rods. Curious as to what glue you use here. I’ve been using 24/hr Araldite. 👍🏻👍🏻🇦🇺
He used CA glue which is what super glue is.
I would personally use fiberglass then epoxy that in before wrapping, something as rigid as metal seems like a bad idea in a rod and would really screw up the proper action and just lead to it breaking again.
merci pour cette formidable astuce. (France) 😉👍
show de video, ótimo. Qual a bitola de de multifilamento você usa para fazer o remendo? Esta cola da finalização sobre a linha é de secagem rápida, tipo bonder?
Ótima dica amigo muito obrigado por compartilhar seu conhecimento
SERÁ QUE É SUPER BONDE?
Гвоздь это конечно круто!, долго не протянет, вместо гвоздя нужно(желательно) использовать гибкую вставку, например от сменных вершинок, живучесть повышается.
Сто пудов. При хорошей нагрузке поломка будет перед гвоздём. Не распределитсЯ нормально нагрузка на этом участке.
Задорнов был прав))))) и до задницы та нитка
Я вообще внутрь оправку из плотной бумаги, пропитанной быстросохнущей эпоксидкой, вставляю. А когда схватится - снаружи углетканью, опять же на эпоксидке, сверху приматыааб скотчем. Потом скотч срезаю, и зашлифовываю наждачкой. Получается незаметно, и крепко, и вес и строй практически сохраняется.
Снаружи трубку одевать надо.
@@user-xz9en5wj1q внутрь ломик, снаружи канализационную трубу
Very helpful. Great video thanks
Very nice thank you for showing it on you tube have a nice day 😉
Muito bom! Parabéns.
SERÁ QUE É SUPER BONDE?
Есть ещё проще вариант:вставку сделать не из гвоздя, а из стеклопластика( китайские дешёвые вершинки).
Гвоздь, как мне кажется, все-таки надежней - в этой части лучше, что бы изгиба больше не было вообще. Но, вот края гвоздя бы сделал максимально шаровидными, что бы не было места концентрации усилия об точечное место в виде заусеницы. А еще, неплохо бы, чтобы до и после гвоздя какой-нибудь наполни тель в виде герметика был.
@@andreykalita1205 в районе гвоздя (где он заканчивается) будет новая поломка. Я так пытался ремонтировать бамбуковые удочки, когда мне было 12 лет. После того, как подрос, понял, что необходима трубка снаружи.
Mantap boss mudah dimengerti dan di pahami zerima kasih ilmu nya
Thank you for the video! Very helpful!
Simples e perfeito. Maravilhoso!
I use a 6 to 7 inch section of a. bicycle tire spoke. So much more effective and longer giving more support to the fractured area. My dad taught me this, decades ago.
makes a lot of sense thanks.
Wow that was amazing bro I will try it next time 👍👍😍😍😍
Keren ilmunya....
Terimakasih bang....👍👍👍👍
the materials that are used is standard super glue and nylon thread (fishing line). the lighter is supposed to shrink the thread hot air blower will do as well. good luck
Actually the lighter is just to remove the fuzz on the thread that would impact the appearance of the finished repair.
This is great but it would be nice to know the supplies used to fix it?
Nail, fly tying thread, CA glue 👍
Jetzt wird es wahrscheinlich unter den eingebauten Zapfen demnächst brechen......,aber schön gezeigt,Danke
Thank you sir my rod is in a million pieces so this realy helps
When my rod snapped my heart literally broke
i feel you bro
same it happened when I was taking algae off of the rod and then I heard the snap noise and a bunch of tension released form the line and the rod, I looked at my rod and a foot of the rod came off and I just thought "there is no way that just snapped my rod."
Brought my 4 year old with me to the river, used the same rod since I was 16, bought a new one for bobber and egg fishing for salmon nicest rod I've had a nice 9'6 okuma guide select pro $200 or so...stepped on 😔
Same 😔
i felt the same thing
Using a nail to fix a broken rod section will destroy the action of that rod, better to use a section of another broken rod epoxied in place to join the two pieces, epoxy is more flexible than superglue which will eventually break, you can also use a piece solid fiberglass from a quiver tip to repair sections that brake close to the top eye which are too narrow to fit a section of hollow rod inside.
What if we don't care about the action....
@@alfredliggins8510 then you should just use an inch thick stick for a rod with some baler twine tied on the end for line, a bent safety pin for a hook and a chunk of roofing lead for a weight.
i have 4 expensive rod to fix, was looking for solutions. its here, thanks
Top job, brilliant idea 👍🏼
Если уже таким способом ремонтировать то хотя бы для приличия края у гвоздя на наждаке закруглил бы ато острые углы при нагрузках со временем расколят стеклопластик а по нормальному надо бы стеклопластик пустотелый вставлять внутрь ИМХО :)
Если такой умный - покажи.
@@user-ik8zy6ho6g я вставлял кончик от зимней удочки подогнал по диаметру кончик из стеклопластика а так делать бы не стал
Эти иностранцы не имеют понятия про синюю изоленту - главный ремонтный материал в РФ.
Также сделал, но вместо гвоздя вклеил кусок стеклопластика от старого удилища. Легче в 1,3 раза
и прям также намотал как в ролике?))
Verdaderamente, magistral, sin casquillo y conserva la flexibilidad.
I broke mine in a car door shortly after building it. It was the first fly rod I ever built. I came up with the same idea but I used epoxy at the time many years ago. Thanks
If you don't have any thread could you use heat shrink tubing?
釘か…。
でも同じ要領で他の素材(釘より軽くテーパーやカーボンに馴染みそうな)を探せば、何かいいのがあるかも。
あとは愛情でカバー、だな。
I'm the kind of person that sees value in everything. And I also get a sentimental value from things I repair. Today I broke a rod like an idiot and I really want to buy what I need to repair it.
Seeing this done with what I believe to be a watery cyanoacrylate, some thread and a metal is reassuring. Unfortunately my rod is in a bad way, it needs a guide and has two breaks in the tip. I think it's a little out of my hands because it broke in the first place because I tried to shortcut life and use a stone bench grinder to attempt to remove a broken guide, slightly scratching a little deep in the the rod creating a weak point where it snapped, and somehow snapped like 10cm down the rod in another spot. It's like my only decent rod too I'm so sad..
Спасибо зам мастер клас, по ремонту училища🇷🇺🇷🇺🇷🇺
Идея правильная - воплощение никс. Внутрь по диаметру стеклопластиковый кусочек 5-6 см на клее супер-гель, выровнять соосность без спешки, клей позволяет. Сверху шину из полосок 1-1,5 мм ( с кусочка старой удочки), длинной 5-6 см на клею. Сверху бандаж из капроновой нитки, пропитать клеем 505 секунда (хорошо пропитывает).Все. Далее на вкус - клеем двухкомпонентным 5-ти минутка. Для красоты и аккуратности.
а почему внутрь не кусок карбона, подходящей конусности
Thank you for the inspiration friend. Good thinking
thanks 👍
Sangat mmbantu bang ilmunya,,
Sukses trus..😀👍
amien.. makasih om
Hi, what Kind of yarn / filament did you use? cheers!
I see he didn’t answer you. I’m wondering the same as well as what that blue “string” was after the “thread.”
@@merlin80232 just use a 40lb braid or something similar
Blue string was just used to pull tag end of the original string through itself
what nylon and what glue is used, thanks good video
Super Glue, this glue from korea, but in my country called LEM G.
And the braid, just standart braid, maybe size 0,8 or 1
I ordered a fishing rod 3 months ago and it arrived yesterday.
A friend broke it today.
I cried for 4 hours.
So thank you very much.
I did this on my pole and it worked great.
Just by that knot I can tell 100% you tie flies
Edit: that was a really smooth hand whip finish
Для начала надо научиться отличать удочку от спиннинга, а плоскогубцы не идут в сравнение с сопротивлением рыбы.
I have a 4pc eagle claw pack rod that has two splices and the handle replaced because the screw ring jammed so if you count the pieces off three other poles it's now a 7 PC gotta luv it I keep it one of those foam six pack carriers like a godess,,!
Thank you very much .
Nov. 22nd 2021 Mon. 11:24 am
from Yokohama City Japan
Just got a custom made ultralight rod yesterday. $250. Tip got snapped by my kayak lid before I even got to use it once.
My condlolenciss I broke my favourite baitcasting rod a few days ago . After watching this a repair will be attempted without the nail .
Да все гораздо проще, сломался такой, не бери больше такой же, найди лучше и купи, делов то....
Saludos desde 🇨🇱, no pensé q fuera tan censillo.... 👍👍👍
Mantap om sangat membantu.. Dulu saya punya joran patah tp di buang aja karna gk bisa n gk tau gmn caranya 😁
Sekarang liat video ini jd nyesal saya knapa dulu di buang jorannya huhuu
wah sayang sekali om, padahal joran patah masih bisa di manfaatkan, masih ad beberapa tips lg memanfaatkan joran patah, nnti klo ada waktu lowong saya buat video nya 😁
Strength Test :
th-cam.com/video/hS62WjzBrjU/w-d-xo.html