Delkevic Sport Standard Regular Exhaust Baffle Removal Help Video
ฝัง
- เผยแพร่เมื่อ 14 มิ.ย. 2024
- Delkevic Sport and Standard Exhaust Baffle Removal Help Video
This is an additional fitting guidance video to support the documentation that is enclosed with the exhausts, to further help our customers get the exhaust from the box on to their bikes with the minimum amount of fuss. It's available in 4K UHD resolution so you can comfortably watch it on your smart TV as well as on a phone or computer.
If you haven't yet bought this system, buying one is easy, head over to our website www.delkevic.co.uk, www.delkevic.com if you live in North America or www.delkevic.com.au if you're in Australia or New Zealand.
Please click subscribe to get updated when we release new videos and feel free to leave comments and feedback below, if you like our videos please click the thumbs up/like button.
You can check us out on Facebook, Twitter and Instagram too! - ยานยนต์และพาหนะ
I just wanted someone to know that i appreciated the "baffled" joke towards the end of the video.
Ha ha! Thank you, I couldn't resist including it :)
will taking out the baffle on a stainless steel megafone delkevic exhaust on a kz1000 require any carb or other settings to be adjusted? or will it run just as good with or without the baffles?
HI, it will significantly change the gas-flow characteristics of the exhaust, and therefore it will affect how the engine runs and necessary carb setting. In the classic baffle removal video it is recommended that the Megaphone exhaust baffle is NOT removed.
I didn’t realise the van requires removal for the baffle removals. I fit and remove for different rides. Is it possible at all to grab the baffle from the end of the oval titanium can I have do you think please? I really didn’t want to have to keep taking the can off and on. The build quality is lovely fyi
Hi almost all of our customers choose to either have the baffle in, or have it out and then keep it that way. We don't design it to be constantly removed and refitted and that's why on this exhaust, it's at the front. For things like spark arrestors etc. obviously they do go in at the back end so they can be taken on and off again easily.
Is there a video on using the Delkevic re-packing kit?
No, we don't have a video for that one, sorry.
Are Delkevic slip-ons universal? Is the PP2206 designed for a specific type of bike?
Hi, yes these silencers/mufflers are universal/generic, it is the link pipes and/or downpipes which are specific to particular bikes. However, they do have differing effects and some bikes prefer longer exhausts, some work better with slightly shorter ones as yuo can determine from the dyno videos on our channel.
こんにちは。メルカリから拝見しました。検討しておりますが、今後ヤフオクなどへの出品予定はございますか？
こんにちは:)確認しますが、日本に常駐しているオフィスはありますが、それを通じて販売しているとは思えません、通常の「その他の地域」の販売は delkevic.co.uk のウェブサイトから管理されていますので、そこから購入するか、少なくともそこの営業部門に連絡して見積もりを提供してください:)
The question is, what if any is the effect on my motor if I remove the baffles from my Delkevic mufflers. want to make sure that I won't harm the bike's motor.
When we test the exhausts, we test them WITHOUT the baffles installed. Running your bike with the baffles installed is closer to running it with the OE exhaust, running without the baffles will allow an increase in the flow of exhaust gases from the engine, therefore helping to scavenge the cylinders better and allowing more fresh fuel air mixture to burn effeciently leading to an increase in power, in theory- obviously the amount depends on the bike and the exhaust.
Have a DL 10 can on a ZRX 1200. Installed the baffle. Will it stay in place with one set screw? Seems the end of baffle rests in inside of can.
Hi, the single screw is enough to secure the baffle insert :)
1 No loctite (purple..blue) is recommended for the set screw?
You can if you want to but it gets very hot, possibly hotter than normal loctite could endure. Using the screw dry will cause the metal to 'grip' a little and we haven't had a problem with them coming loose. You have to consider whether people will want to remove it again and how liekly they are to strip the hex round if it is too tight. You could use a dab of the gasket sealer supplied with the exhaust but again, it might be too much.
I’d like to quiet my DelKevic bullnose 16” on my 2020 Vulcan S. Any way to get a quieter baffle? They won’t respond to emails.
That is quite a loud exhaust to start with, it is relatively small with less packing material in it than a normal exhaust. If you need a quieter exhaust, we offer several different styles but they are physically larger. Please check the specs of the different exhaust on our website, the noise reduction figures are published on there.
why the baffle is reversed on the titanium model. it is open on entry and closed on exit. is it more restrictive in this position? what is the reason, thanks?
It was a combination of a few reasons, the way it fitted, ease of installing or removing it.... doing it the way we did just seemed to be the easiest way to do it and also we did find having the restriction at the front caused a hotspot to build up at the front of the muffler/silencer but this didn't happen when the restriction was at the rear of the baffle.
How do you remove the baffle on the 13" tri oval mufflers
There is an access hole underneath the rear exit.
Honestly, I wouldn't remove the baffle. Delkevic exhausts are loud enough as-is.