How to Program Chamberlain KLIK2U wireless Universal Keypad

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น •

  • @robbarron3356
    @robbarron3356 ปีที่แล้ว +2

    Best set of instructions. I watched another and did it 10 times and it didn’t work. I assumed the sender unit was bad. Stumbled upon your video and BAM! worked like a champ. Much thanks!

  • @joannemierzejewski6919
    @joannemierzejewski6919 19 วันที่ผ่านมา

    Thank you so much!!!! Key for us was to do the process slowly. You don’t need to rush through the process. We were trying to speed through the process and therefore the learn button was still on. We have an orange button so we were 2#. This was the most helpful video!!!!

  • @robertgraziano8326
    @robertgraziano8326 ปีที่แล้ว +3

    Thanks for simple walk through and especially for mention of ‘double zero’ input for Genie. I watched a different video that missed that detail and it gave me fits watching and rewatching that video, wondering why it didn’t work. Then I found your video that included that important detail. Thank you.

  • @be_early2024
    @be_early2024 4 หลายเดือนก่อน

    Older home maintained because of great detailed videos like this one.
    Thank you!

  • @shanewyer5226
    @shanewyer5226 2 ปีที่แล้ว

    Thanks! The instructions show that it needs to have a two-digit ID. After watching your video and seeing only one digit is needed, the programming went well.

  • @dwightphilipoom6734
    @dwightphilipoom6734 6 หลายเดือนก่อน

    Best one yet out there because you showed the instruction sheet with the list of the color button and associated code number which was the yellow button and the number 8 for my lift master. Thank you

  • @robertjacques7064
    @robertjacques7064 ปีที่แล้ว

    OK the directions that are supplied or not real clear on certain things and I was already frustrated but the video explain everything perfectly. Thank you.

  • @grantknight3978
    @grantknight3978 2 ปีที่แล้ว +1

    So much easier to watch than the Chamberlain video. Thanks!

  • @phillyskillz1428
    @phillyskillz1428 6 หลายเดือนก่อน

    This one goes down as an oldie but goodie!! Helped me out alot thanks bud

  • @Robertpeace233
    @Robertpeace233 6 หลายเดือนก่อน +1

    Been trying to figure out why I couldn’t program a new keypad till you mentioned I had to hold the # and * at the same time till they STOP flashing god I wish I knew that sooner! Thanks!

  • @Kovi2000
    @Kovi2000 6 หลายเดือนก่อน

    Awsome instruction, it helped me to program my old remote control works like the new one, thank you!

  • @regiaguilarjr9390
    @regiaguilarjr9390 ปีที่แล้ว +1

    thank, mine is a chamberlain LiftMaster with a purple button, and the 3 is code worked for mine. thank you for your video worked great

  • @richardschulz8191
    @richardschulz8191 2 หลายเดือนก่อน

    Great instructions. Fixed my issue with my Craftsman 1/2 HP opener.

    • @HomeRepairHub
      @HomeRepairHub  หลายเดือนก่อน

      I appreciate the feedback

  • @annerich3268
    @annerich3268 ปีที่แล้ว +1

    This was the best instructional video ever! Thank you

  • @josuecarias2914
    @josuecarias2914 6 หลายเดือนก่อน

    THANK YOU VERY MUCH FOR THE INFORMATION. IT IS CLEAR AS THE SUN LIGHT. HAVE A GREAT DAY.

  • @BarristerBrian
    @BarristerBrian 3 หลายเดือนก่อน

    Finally a video that worked! Thanks!!!!

  • @davidw.mcclain257
    @davidw.mcclain257 2 ปีที่แล้ว

    Just what I needed and thanks for showing the page with the door type codes! Worked great thanks.

  • @CB-gi6yr
    @CB-gi6yr 2 ปีที่แล้ว +1

    Quick and easy walk thru, worked perfectly. Thanks!

  • @justinwhite3257
    @justinwhite3257 หลายเดือนก่อน

    Great video! Short and right to it!!!

    • @HomeRepairHub
      @HomeRepairHub  หลายเดือนก่อน

      I appreciate the feedback

  • @norrisborden
    @norrisborden ปีที่แล้ว +1

    Life saver. Thx for the video. 2 thumbs up.

  • @adamnath7787
    @adamnath7787 11 หลายเดือนก่อน

    How do you program two garage doors with this keypad? Both doors have sears craftsman openers with green buttons. Thank you for your help.

    • @HomeRepairHub
      @HomeRepairHub  11 หลายเดือนก่อน +1

      I believe it's just the same process using the other opener. Just set a different code

    • @adamnath7787
      @adamnath7787 11 หลายเดือนก่อน

      Appreciate your time. @@HomeRepairHub

  • @johnerodz7
    @johnerodz7 ปีที่แล้ว

    This is the best video ever thanks buddy ❤

  • @Stacie2440
    @Stacie2440 ปีที่แล้ว

    Do you enter the code on key pad while the light on motor is on for 30 seconds or do you wait until light on garage door motor goes off then enter code on keypad?

    • @HomeRepairHub
      @HomeRepairHub  ปีที่แล้ว +1

      You just need to wait for the light on the keypad to go out.

    • @Stacie2440
      @Stacie2440 ปีที่แล้ว

      @@HomeRepairHub And it’s fixed! Thank you!!!

  • @reneeklenner1176
    @reneeklenner1176 7 หลายเดือนก่อน

    Can you tell me how to get the cover off??? I opened the box and I am stuck on getting the cover off the key pad.

    • @jamiebonczek8026
      @jamiebonczek8026 6 หลายเดือนก่อน

      I just used grip and force to lift it up.

  • @Courtney-bc2mt
    @Courtney-bc2mt ปีที่แล้ว

    Thank you I was missing the part about letting your garage close all the way.
    Purple button code: 3
    After you press the learn button then enter your code again. LET THE GARAGE CLOSE ALL THE WAY. Then enter your code and it will work.
    My issue was i didnt let it close all the way. So the code wasn't programming. Let the garage close before you hit another button.

  • @joekarnsenko
    @joekarnsenko ปีที่แล้ว

    What if my old 2001 ChalengerGL opener has no "learn button"? There is an original keypad I'm trying to reprogram since I just bought the house.

    • @HomeRepairHub
      @HomeRepairHub  ปีที่แล้ว +1

      Not sure. You may have to buy a challenger wireless keypad. Does it have dip switches? I believe Wayne Dalton owns them now.

  • @henrygonzalez1201
    @henrygonzalez1201 2 ปีที่แล้ว +3

    What a pain in the butt to program the device, but I got it done and , Thank you.

  • @unchboy
    @unchboy ปีที่แล้ว

    Is that cover suppose to be permanent and have to be broken to access the keypad?

    • @rickgallegos6530
      @rickgallegos6530 ปีที่แล้ว

      No. Slides up and down to access keypad, while also concealing mounting screw at the same time

  • @tgoodfella
    @tgoodfella ปีที่แล้ว +1

    Thx directions helped

  • @jerrydavis9581
    @jerrydavis9581 2 ปีที่แล้ว

    How do you sync the clicker and the keypad?

    • @HomeRepairHub
      @HomeRepairHub  2 ปีที่แล้ว

      What kind of opener do you have? The clicker, sync with the opener same as the keypad. Here is example, its a Genie opener, but it will be similar. They all program pretty similar, just the number of times you hit the button will change. th-cam.com/video/-w3u4fdU0-Q/w-d-xo.html

  • @jameshaskell1073
    @jameshaskell1073 5 หลายเดือนก่อน

    I did this a few months ago when I bought the unit. ####0 worked to open and close the garage door, every time. Great!
    All of a sudden today, ####0 opens the door. But it doesn’t close it. Now it’s ####0 plus any other key to close it.
    What’s up with that!?!?

  • @lykastannis7662
    @lykastannis7662 2 ปีที่แล้ว

    When I hold the two buttons down together, they simply light up without flashing. Any tips?

    • @HomeRepairHub
      @HomeRepairHub  2 ปีที่แล้ว

      Do you get any lights when you hit the buttons? May want to just put fresh batteries in if you haven't used it in a while.

    • @lykastannis7662
      @lykastannis7662 2 ปีที่แล้ว

      @@HomeRepairHub Yes every button's light flashes, but it just stays lit up rather than blinking until I release. I only noticed this after a 2 month vacation so I havent used it in a while. I'll try switching batteries. Thanks!

    • @rickgallegos6530
      @rickgallegos6530 ปีที่แล้ว

      Same. Need hard Reset. What’s the button inside battery compartment?

    • @rickgallegos6530
      @rickgallegos6530 ปีที่แล้ว

      When pressing both buttons, it only lights up, no blinking.

  • @reginaldjackson5686
    @reginaldjackson5686 ปีที่แล้ว

    Thank you this was very helpful and save me $150.00

  • @adambleazard423
    @adambleazard423 2 ปีที่แล้ว

    Good walk through

  • @ricardoquezada6777
    @ricardoquezada6777 8 หลายเดือนก่อน

    Muchas gracias por la ayuda 👍👌

  • @summermoon4620
    @summermoon4620 8 หลายเดือนก่อน

    If you have overheard motor press 0 twice on the end of your code when setting up

  • @MegaDog2012
    @MegaDog2012 10 หลายเดือนก่อน

    Thank you sir

  • @dani999777
    @dani999777 8 หลายเดือนก่อน

    What if I have 2 garage doors?

    • @HomeRepairHub
      @HomeRepairHub  8 หลายเดือนก่อน

      Unfortunately the Klik2U can only be programmed to 1 door, so you would need a second keypad.

  • @Gary55379
    @Gary55379 2 ปีที่แล้ว

    It needs the code to close?

    • @HomeRepairHub
      @HomeRepairHub  2 ปีที่แล้ว

      Unfortunately, yes. Pretty much any aftermarket universal remote requires the code.

    • @Gary55379
      @Gary55379 2 ปีที่แล้ว

      @@HomeRepairHub The one I have now does not. I was gonna replace it because the buttons don’t always work anymore but if I need to enter the code to close it, we’ll, that’s just dumb.

  • @MichaelSondereggermusic
    @MichaelSondereggermusic 3 ปีที่แล้ว

    Thank you!!

  • @vlockhart4835
    @vlockhart4835 ปีที่แล้ว

    My Chamberlain garage door opener doesn't have any buttons on it now what

    • @HomeRepairHub
      @HomeRepairHub  ปีที่แล้ว

      Are you talking about the garage door remote or the keypad?

  • @frankp9909
    @frankp9909 3 ปีที่แล้ว

    Thanks!

  • @Killyso
    @Killyso ปีที่แล้ว

    Anybody know how to get the cover off lol

    • @HomeRepairHub
      @HomeRepairHub  ปีที่แล้ว +1

      Unfortunately, there is no easy way. I had the same issue. You just have to use a bit of force when trying to slide it off.

    • @Killyso
      @Killyso ปีที่แล้ว

      @@HomeRepairHub been trying for a few days now and still can’t get the right grip to be able to force it. Pretty inconvenient design

  • @matt75hooper
    @matt75hooper หลายเดือนก่อน

    This will program your keypad. But it then deprograms your remote controls !

  • @bkehlin
    @bkehlin ปีที่แล้ว

    This does NOT work with LiftMaster

    • @HomeRepairHub
      @HomeRepairHub  ปีที่แล้ว

      It should. What type of liftmaster do you have?

    • @lesliemcgowan4306
      @lesliemcgowan4306 7 หลายเดือนก่อน

      @@HomeRepairHub Ours worked just fine with our 2004 Liftmaster for 20 years.

  • @nuubxiii5278
    @nuubxiii5278 2 ปีที่แล้ว

    My garbage ass product won’t even slide open. It’s honestly very annoying. Nobody, no matter the video seems to have a stuck clicker. You started your video off with an open one. Clearly it’s not suppose to be hard to open. It’s like they sent me mine glued…

    • @HomeRepairHub
      @HomeRepairHub  2 ปีที่แล้ว

      I can be a bit challenging to open but shouldn't be that difficult. You can't pinch in on the sides or it won't open. The cover simple has to slide off and if you put any pressure on the sides of the cover it won't move.

    • @nuubxiii5278
      @nuubxiii5278 2 ปีที่แล้ว +3

      @@HomeRepairHub Turns out they sent me a faulty product lol. I had to pry it open with a knife then I had to sand paper the grooves to allow the casing to open and close smoothly. So I got it done haha but it was for sure faulty! Thanks for the reply my guy!

    • @keliciamitchell6068
      @keliciamitchell6068 ปีที่แล้ว

      Just bought this and we can’t get it open as well! Oh well! It seems to be stuck

    • @fluidgrace
      @fluidgrace ปีที่แล้ว

      i had the same problem, i had to use three knives to get it unstuck and open it. I took an exacto knife and shaved some material off the inside cover and used a bar of soap to help it slide

  • @vigrue-kingofscrew4804
    @vigrue-kingofscrew4804 3 ปีที่แล้ว

    hi,we want to send you some products that fit your channel, do you have an email?

  • @basilalsilawi3753
    @basilalsilawi3753 9 หลายเดือนก่อน

    So much easier to watch than the Chamberlain video. Thanks!

    • @HomeRepairHub
      @HomeRepairHub  9 หลายเดือนก่อน

      Thanks. I appreciate the feedback.

  • @chaseman
    @chaseman ปีที่แล้ว

    Thanks!