After 3 Months In Business This Is My CNC Plasma Strategy

แชร์
ฝัง

ความคิดเห็น • 35

  • @Transformers1983jd
    @Transformers1983jd 2 หลายเดือนก่อน +2

    First Comment! Thanks for the video.

    • @ThyialIndustries
      @ThyialIndustries  2 หลายเดือนก่อน +1

      Nice. Hope you got some value from it!

  • @ergenekon4l
    @ergenekon4l 2 หลายเดือนก่อน +2

    Congratulations, dude .I hope one day you will also make parts for Lockheed, General Motors and Electromotive.

    • @ThyialIndustries
      @ThyialIndustries  2 หลายเดือนก่อน +1

      @@ergenekon4l 😅 we can only hope

    • @ergenekon4l
      @ergenekon4l 2 หลายเดือนก่อน +1

      @@ThyialIndustries Remember, you started your business in your garage Like Amazon and apple.

    • @ThyialIndustries
      @ThyialIndustries  2 หลายเดือนก่อน

      @@ergenekon4l that's true! We'll see what happens in a few years

  • @austinburtch5972
    @austinburtch5972 2 หลายเดือนก่อน +1

    Great video

  • @davesdoodads2005
    @davesdoodads2005 หลายเดือนก่อน +1

    I see you've been tackling a lot of issues with your plasma table. Given the time and effort it takes to build and set it up properly, do you think it might be better to just buy a quality, lower-end unit instead? Your videos are great.

    • @ThyialIndustries
      @ThyialIndustries  หลายเดือนก่อน

      @@davesdoodads2005 thanks. Yes, In a few of my past videos, that's the exact conclusion I made. Especially if you are trying to jump start a business

  • @yoti-fab
    @yoti-fab 2 หลายเดือนก่อน +1

    If I had one piece of advice for anyone building or buying a plasma table....... THC is a must! I'm surprised langmuir offers it as an upgrade.

    • @ThyialIndustries
      @ThyialIndustries  2 หลายเดือนก่อน

      @@yoti-fab will hopefully get mine installed soon!

  • @mountainman1978
    @mountainman1978 2 หลายเดือนก่อน +1

    awesome video

  • @mdsabit158
    @mdsabit158 หลายเดือนก่อน +1

    Awesome channel... subscribed.... I'm from Bangladesh...I also make a diy plasma CNC from my wood CNC. I'm working on it... Bought a 65A plasma cutter and 200 leter air compressor...Does my air compressor work well during whole cutting process?

    • @ThyialIndustries
      @ThyialIndustries  หลายเดือนก่อน +1

      @@mdsabit158 thanks.my air compressor works great. Even for longer programs

    • @mdsabit158
      @mdsabit158 หลายเดือนก่อน

      @ThyialIndustries I can't trigger plasma torch with g code. My CNC controller (richauto a11)works with 24v signal. I tried to trigger plasma torch using SSR-25 DA. But SSR doesn't on. I also use tip41c transistor to trigger SSR but doesn't work. SSR always triggered...i have 5v relay. How to connect it

    • @mdsabit158
      @mdsabit158 หลายเดือนก่อน

      @ThyialIndustries thanks for reply..

  • @agguilarmetalwork4494
    @agguilarmetalwork4494 2 หลายเดือนก่อน +1

    Great info ! 👍🏻🤜🏻🍺✌🏻

    • @ThyialIndustries
      @ThyialIndustries  2 หลายเดือนก่อน

      @@agguilarmetalwork4494 thanks!

  • @kerryholt7102
    @kerryholt7102 2 หลายเดือนก่อน +3

    I bought the jdgarage thc for $160, since then I bought the langumire crossfire pro and never used the thc, If you want it let me know $100 plus shipping. I started with the JDG small table then built a 5x10, but with growing my business I had to have something more reliable. I enjoyed the process and learning everything, I just couldn't afford to have the down time. When I have time ill get back to my 5x10 table one day.

    • @ThyialIndustries
      @ThyialIndustries  2 หลายเดือนก่อน +1

      @@kerryholt7102 I hear you on that! Can you send me a quick email thyialindustries@gmail.com? Definitely interested

    • @ThyialIndustries
      @ThyialIndustries  2 หลายเดือนก่อน +1

      @@kerryholt7102 also what kinds of products do you make? Do you just cut out signs and stuff? I'm starting to see that small projects like these are fine for starting out but in the long run it will be hard to keep up with.

    • @kerryholt7102
      @kerryholt7102 2 หลายเดือนก่อน +1

      @@ThyialIndustries email sent

    • @ThyialIndustries
      @ThyialIndustries  2 หลายเดือนก่อน

      @@kerryholt7102 got it. Thanks!

  • @jensonhartmann3630
    @jensonhartmann3630 2 หลายเดือนก่อน +1

    great work bud, amazing how important that water is huh lol

    • @ThyialIndustries
      @ThyialIndustries  2 หลายเดือนก่อน +1

      @@jensonhartmann3630 🤣 should have used it sooner!

  • @sharpsticksnz4112
    @sharpsticksnz4112 2 หลายเดือนก่อน +1

    Comment up or hit like to grow this man's business 👍

    • @ThyialIndustries
      @ThyialIndustries  2 หลายเดือนก่อน

      @@sharpsticksnz4112 appreciate the support

  • @zolcsixyz9973
    @zolcsixyz9973 12 วันที่ผ่านมา +1

    You’re a great guy. But you do silly things. You know you need a Thc from the first video you tested the machine. The amount of metal sheet you ruined would have paid for your Thc 😅 come on, I want to see you succeed. Stop shooting yourself in the foot cause the “talent” you have is unique. By the way don’t have adhd? Just because the skills you represent and learnt by yourself is a different level I hope you understand that :)
    I’m planning to do similar in 2025 (about to relocate my life first)
    Look into powder coating as well. It can give a boost on your prices and let you produce better quality in some instances. Anyway I signed up :)

    • @ThyialIndustries
      @ThyialIndustries  12 วันที่ผ่านมา +1

      @@zolcsixyz9973 thanks for the feedback! I think a lot of it is just taking things too fast. I want to go fast so I just try to make things work I probably miss a lot of common sense applications. But I'm still trying 🤣

    • @ThyialIndustries
      @ThyialIndustries  12 วันที่ผ่านมา

      @@zolcsixyz9973 good luck in your endeavors! Just hang on tight

    • @zolcsixyz9973
      @zolcsixyz9973 12 วันที่ผ่านมา +1

      @@ThyialIndustries tell me about it I’m the same, when I want something I usually want it by yesterday 😅
      We have a saying in my country “only dogs are trying”
      Don’t be a dog, be like Nike and just do it :)
      Can’t wait for your next video “let me introduce my diy Thc to you” 😅