Unbelievable. I first tried jumping it as that’s what the other answers were for this problem but after I jumped it, it died again. So I tried this trick. It worked perfect. How is it that people figure this stuff out. It’s pure insanity. Thank you for your help.
Thank you very much it’s a very useful video, it worked on my 1500 today, their was a sensor of tires I keep on ignoring and when I turned it off it didn’t start again , you saved me today otherwise i was stuck at a gas station. It works on pretty much on all dodge vehicles i can say
Wow, this happened to me with my 2015 Dodge Journey lastnight. I watched your video and I tried your instructions... It worked (although I tried it twice) Thanks a million!
Same problem in a model year 2014 (2.4L). Not surprised to see the problem has continued into the 2018 model year vehicles. Wish I'd done more research before buying a Dodge.
After trying two times this solution works! Thanks a lot!. The only issue is now the doesn’t want to start normally, seem like I have to fo this trick every time. I really would like to know what is causing this issue. But anyhow, this workaround works fine!
Thanks a lot Mr. FRANKO A NOTA!!! My mother would have been late to work but as soon as I figured out that it was not the battery. I knew it had to be an easy fix. I really appreciate the info but my mother of course appreciated me but she really meant you! God Bless
So I have a 2009 Dodge Journey SXT and I went ahead and started it up "5 times" as you stated. It wouldn't start at first so I started it up again "5 times" as well as lightly tapping the accelerator and it started running. I'll try it again tomorrow morning. I'll keep you updated.
@@youngtraveon03 well, it works in warm days, but not during the cold weather. Although sometimes it does crack, but only when it's in the near 50°s if it's below that, it won't crank and so I have to use starting fluid in order for it to turn on.
Contacts in push button sometimes misalign . Engine cracks but nothing else. Remove button with small screwdriver. Pull button out and insert keyfob. If it works the you have the source of the problem. Later put the button back in without depressing the brake. Then push on the brake pedal and push the button. It will magically start up as if nothing was wrong!
Thanks for the video. It worked for me. Just had to use some jumper cables after I did this. The battery was low. So it would not start at first. But after the jump it started right up
I think the manufacturer wants us to take it to a dealer for the fix. Problem is the technician s haven't had any classes on issues that may arise on these models. I don't know if this is true but, I've read in automotive magazines where the dealerships won't pay for there employees to take these classes. They have to pay for it themselves.
So my oil light went on on Wednesday then the car wouldn't start on Thursday after I added oil. You described what it does perfectly! I'll try this in the morning and if it works thank you so much you're a genius. I wondered if there was some kind of safety feature
Thank you sir, fan kept staying on long after off and engine cooled. Tapped relay to turn off but battery was drained and went into limp mode. Jumped battery and did the 5 button press and whahla . Thanks for uploading video
I just got a 2011 journey same problem light on won’t start , start light go on brake should loosen , put it in N foot in brake and it will start !!!! Old trick my dad thought me , idk why I panicked today and I tried it and worked , I’ll try this guys way if it don’t start in the morning lol but if not put it in N and start
That's what I have to do too at times. Take out the fob, re-insert it, put the car in Neutral, rock the shifter right and left in N a time or to, then start it up. 2009 6 cyl AWD
FYI, this also works for an older Journey with a key fob instead of a start button. I turned the key to "start" 5 times, stepped on the brake, and it started right up.
I have a 2009 Dodge journey and I've been having problems with it starting to not starting that times and then there's always like a clicking noise when I turn the heater and AC on. Does the trick work with the turning the key five times and then pushing the brake?
@@FRANKOLANOTA I have the extended warranty and took mine into the dealer. They determined it was a problem with some sensor in the transmission and replaced the parts. Haven't had it happen since then. Hope this helps!
I have a 2009 SXT 6cyl. Same problem. I put the fob in the off position. Then turn the fob to acc, put the shifter into neutral and rock the shifter side to side in neutral. Then while still in neutral, I turn the fob all the way to the left, then all the way to the right to start it. Sigh ...
I have a 2009 Dodge Journey SXT and I went ahead and started it up "5 times" as you stated and it worked I believe? It wouldn't crank at first so I started it up again "5 times" and lightly tapped the accelerator and it started running. I'll try one more time tomorrow morning and give you an update.
Thank you for this. It worked for me. The reason his happened is because It has a recall on the PCM. I would have spent thousands of dollars without this.
Any idea what to do with the models that don't have a starter button? I have a 2010 Journey that uses a key fob, but same issue. All the lights, radio etc come on the battery itself isn't dead but when I turn nothing happens.
its normally the battery in the fob is dead, always carry spares they are cheap and takes 1 minute to take apart the fob with no tools using the manual key in the fob to split it apart.How to overcome?..the fob has a small circuit board that is in the end of the fob, push the fob on the start button while pressing the brake and it will start, why do the batteries in this vehicle and porsches etc that have push button) dont last? Because unlike a fob that uses a key that only powers up when you press the button, it is always using power thats why you can open the doors with the fob in your pocket by touching the door handles or rear rubber button on the left on the liftgate. Id replace them every year.
I'm in the same boat. Just got my Journey towed to my house. It shutdown on the road while driving. 2 people tried to give me a jump including the tow truck driver ...didn't work. Since its Saturday night, I can't get it looked at untill Monday.
My 2018 dodge journey just randomly wouldnt start for me this afternoon, full battery, system would engage when button is pushed but no crank. Check engine light was flashing. Completely ramdom shit. Then 5 mins later it started like nothing was wrong.
How do you do this with a fob ignition. Do you turn the key 5 times and then push the brake then turn key again? Hubby passed away , now trying to do things on my own
@@patmitchell9356 I have a 2009 Dodge journey. I'm not sure what year is yours is but I have the five key did that help you get your car going cuz I'm having some problems as well?
I put another motor in a 2012 dodge journey 3.6L after I completed the installation I had no crank no start and used this method and it started and ran well burped the cooling system and drove it came back to the shop turned it off and restarted it and it did start again but after I let it sit for awhile tried to start it again and I had a no start no crank again
That's so crazy mine's a 2012 and I mean everything color and all is identical to mine your radio everything. My car refuses to start once the temperatures here go below zero yesterday was plus one started beautifully this morning 6:00 a.m. temperature dropped to minus 15 and it would not turn over I'm mind blowing I've watched a million videos nothing makes sense my battery is brand new almost everything in my car has been replaced. Yesterday because it finally started with the mild temperature I was able to put in gas line antifreeze and fill up my tank booted around town a minute to help circulate and still didn't start this morning so I'm lost please help
Omg that happened to mine this morning. I must of pressed it 5x without knowing because after a few minutes it started. Its frustrating on a 2018 model that's barely 4 mo old.
I wish that I had known about this trick. My Journey is only 2 months old. I wrote a scathing complaint to Chrysler Customer Service, because this problem has been around for years and they haven't corrected it. Shame on them.
So a good friend of mine has a 2014 Journey that won't start back up after being driven long enough for it to get up to operating temperature & after she gets back in to start it after going into a store, it won't start, no click or anything. She's had the relays replaced, the starter replaced, the battery replaced, but it still has the same problem. Anybody have any thoughts on this?
I have a 2009 SXT 6cyl. Same problem. I put the fob in the off position. Then turn the fob to acc, put the shifter into neutral and rock the shifter side to side in neutral. Then while still in neutral, I turn the fob all the way to the left, then all the way to the right to start it. Sigh ...
instructions: 1. With brake not depressed, press start button until it is in the run position. 2. Then depress brake 3. Then gear shift should release, put it in nueyral. 4. Then push start button. Voila!
@@FRANKOLANOTA I have a 2014 that will not sync with the FOB. I have tried pushing the start button 5 times to clear the security feature. Another person claimed to start the engine by using unlocking, and locking the vehicle while inside the cabin but that doesn't work.
@@avidtraveller I haven't heard anything like that but its always worth the try. honestly this was a rental car and I was going by what they told me to do from the rental company n I was lucky it worked
Hay you guys my coworkers had this same problem today and this video mite work for some people but it didn’t work for us! We tired everything and nothing seemed to work so I finally said for get it let me call dodge and see what els we could do so I call and you guys would never believe me when I say this but!!🤗🤗🤗 if you have a push to start and have this same problem just put your unlock key in your hand and push it on the start bottom🥰🥰thank me later and subscribe to my channel‼️‼️
I have a 2009 SXT 6cyl. Same problem. I put the fob in the off position. Then turn the fob to acc, put the shifter into neutral and rock the shifter side to side in neutral. Then while still in neutral, I turn the fob all the way to the left, then all the way to the right to start it. Sigh ...
@@RevivalMuzic It may be but it is difficult to say without having a diagnosis. recently I was breaking my head with my infiniti g35 that did not start and in the end it was something as simple as cleaning the battery terminals well.🤯
Emile Gafeza yes!!!! So happy it did! It’s happened to me a lot because my 2 year old likes to play in the car, with no key, and that’s what triggers it....but nothing is working for me now. Ugh
We have a 2014 dodge journey and wouldn't start. I tried the 5 button push and it worked.. Appreciate it. I'll never buy a dodge again
I live in Florida. Thanks for helping me to help my mom start her car. This worked for her. She now thinks I’m a car mechanic.
Unbelievable. I first tried jumping it as that’s what the other answers were for this problem but after I jumped it, it died again. So I tried this trick. It worked perfect. How is it that people figure this stuff out. It’s pure insanity. Thank you for your help.
Thank you very much it’s a very useful video, it worked on my 1500 today, their was a sensor of tires I keep on ignoring and when I turned it off it didn’t start again , you saved me today otherwise i was stuck at a gas station. It works on pretty much on all dodge vehicles i can say
Hi what tire sensor was the one that needed to be changed?
You are a life saver!!! Worked like a charm. Thank God I checked TH-cam before panicking 🙏
Me too ..I panicked😳..have to work Wednesday and it's Labor day today. Wish me luck gonna try.😒😞
Wow, this happened to me with my 2015 Dodge Journey lastnight. I watched your video and I tried your instructions... It worked (although I tried it twice) Thanks a million!
has it done it again im having the same problem
Same problem in a model year 2014 (2.4L). Not surprised to see the problem has continued into the 2018 model year vehicles. Wish I'd done more research before buying a Dodge.
After trying two times this solution works! Thanks a lot!. The only issue is now the doesn’t want to start normally, seem like I have to fo this trick every time. I really would like to know what is causing this issue. But anyhow, this workaround works fine!
Currently watching this as I experience this utterly ridiculous issue.
Thanks a lot Mr. FRANKO A NOTA!!! My mother would have been late to work but as soon as I figured out that it was not the battery. I knew it had to be an easy fix. I really appreciate the info but my mother of course appreciated me but she really meant you! God Bless
good to hear it work for you sir
Does anyone know why my vechicle says car not in park & wont start up.
@@mariaescatel9430 did you ever figure it out? Mine is doing the same?
Thank you very much for this video. I was about to go to work. But can’t start. I search TH-cam. Found this video. 🙏👍
So I have a 2009 Dodge Journey SXT and I went ahead and started it up "5 times" as you stated. It wouldn't start at first so I started it up again "5 times" as well as lightly tapping the accelerator and it started running. I'll try it again tomorrow morning. I'll keep you updated.
How did it go?
@@youngtraveon03 well, it works in warm days, but not during the cold weather. Although sometimes it does crack, but only when it's in the near 50°s if it's below that, it won't crank and so I have to use starting fluid in order for it to turn on.
Contacts in push button sometimes misalign . Engine cracks but nothing else. Remove button with small screwdriver. Pull button out and insert keyfob. If it works the you have the source of the problem. Later put the button back in without depressing the brake. Then push on the brake pedal and push the button. It will magically start up as if nothing was wrong!
Put another motor in 2012 Dodge journey 3.6 L and it wouldn't do anything saw thus video and it worked thanks for the information.
Customer had run car hot and blew head gasket car huh and already went to fail safe mode so that's why this method worked
Thanks for the video. It worked for me. Just had to use some jumper cables after I did this. The battery was low. So it would not start at first. But after the jump it started right up
I think the manufacturer wants us to take it to a dealer for the fix. Problem is the technician s haven't had any classes on issues that may arise on these models. I don't know if this is true but, I've read in automotive magazines where the dealerships won't pay for there employees to take these classes. They have to pay for it themselves.
Check your trunk for missing cable
So my oil light went on on Wednesday then the car wouldn't start on Thursday after I added oil. You described what it does perfectly! I'll try this in the morning and if it works thank you so much you're a genius.
I wondered if there was some kind of safety feature
Chang oil such
Not sure never heard off anything like that. But it does makes since a safety feature like that..
Yes it’s a safety feature, it happens when we ignore sensor warnings , but it’s a very stupid feature. Hopefully it worked for you as well
Didn't work
Thank you sir, fan kept staying on long after off and engine cooled. Tapped relay to turn off but battery was drained and went into limp mode. Jumped battery and did the 5 button press and whahla . Thanks for uploading video
My question in general is why the engineers that make theses car don't step up with the answers
Thats a good question..
Unfortunately, issue is ground connector going from negative ground to starter. Replace the wire to fix issue.
Thank you so much for this! The only video that helped me today 🤦♀️
Mine have been doing this for weeks! Thanks! It worked!
nice!! 👍
I just got a 2011 journey same problem light on won’t start , start light go on brake should loosen , put it in N foot in brake and it will start !!!! Old trick my dad thought me , idk why I panicked today and I tried it and worked , I’ll try this guys way if it don’t start in the morning lol but if not put it in N and start
That's what I have to do too at times. Take out the fob, re-insert it, put the car in Neutral, rock the shifter right and left in N a time or to, then start it up. 2009 6 cyl AWD
Worked like a charm! Thanks!
Thanks for the video, l looks like you were in Miami Gardens area
FYI, this also works for an older Journey with a key fob instead of a start button. I turned the key to "start" 5 times, stepped on the brake, and it started right up.
that's good info. thanks
I have a 2009 Dodge journey and I've been having problems with it starting to not starting that times and then there's always like a clicking noise when I turn the heater and AC on. Does the trick work with the turning the key five times and then pushing the brake?
@@FRANKOLANOTA I have the extended warranty and took mine into the dealer. They determined it was a problem with some sensor in the transmission and replaced the parts. Haven't had it happen since then. Hope this helps!
I have a 2009 SXT 6cyl. Same problem. I put the fob in the off position. Then turn the fob to acc, put the shifter into neutral and rock the shifter side to side in neutral. Then while still in neutral, I turn the fob all the way to the left, then all the way to the right to start it. Sigh ...
I have a 2009 Dodge Journey SXT and I went ahead and started it up "5 times" as you stated and it worked I believe? It wouldn't crank at first so I started it up again "5 times" and lightly tapped the accelerator and it started running. I'll try one more time tomorrow morning and give you an update.
Awsome! Thanks works on fiat freemont 2015! Finaly headed home from work...
Thank you for this. It worked for me. The reason his happened is because It has a recall on the PCM. I would have spent thousands of dollars without this.
that's awesome!
What's a PCM, please?
Do you think it would work on a chrysler 300. I have the lighting bolt symbol on the dash
THANK YOU!! This fixed our problem!!
That’s good 👍🏼 you’re welcome
Why is this happening? My journey also happened, I followed your steps and it worked.
BRO THANK YOU SO MUCH YOU SAVED MY LIFE
Believe it or not my washing machine had to have the lid opened 7 times. Now this on my car. I’m buying a freakin horse.
🤣🤣🤣
Bummer, didn't work. 2013. I'll try again later. Thanks for the info.
Happened to me in the parking lot, came across this video and got my car started (had to do it twice). Did you or anyone figure out the problem tho?
Thanks I thought I was sol.
Any idea what to do with the models that don't have a starter button? I have a 2010 Journey that uses a key fob, but same issue. All the lights, radio etc come on the battery itself isn't dead but when I turn nothing happens.
Thanks my sister car started after we were stranded for an hour then we stumbled across your video
Thats good. Glad the video helped you
its normally the battery in the fob is dead, always carry spares they are cheap and takes 1 minute to take apart the fob with no tools using the manual key in the fob to split it apart.How to overcome?..the fob has a small circuit board that is in the end of the fob, push the fob on the start button while pressing the brake and it will start, why do the batteries in this vehicle and porsches etc that have push button) dont last? Because unlike a fob that uses a key that only powers up when you press the button, it is always using power thats why you can open the doors with the fob in your pocket by touching the door handles or rear rubber button on the left on the liftgate. Id replace them every year.
Had same problem put key fob on start stop button . Worked right away
the booklet says this is what helps if fob battery low, or internal car security was triggered
What do you mean press the button 5 times? Like 5 times Total? Or from off to ac to run 5 times?
Try starter it 5 times,without pressing the brake pedal than actually try starting it with the brake pedal
Had this problem tried everything but if all else fails disconnect the battery cables and that should work
This was kind of a nightmare thing. I like that! 🤣 I’m in a nightmare too! This car won’t start!
I'm in the same boat. Just got my Journey towed to my house. It shutdown on the road while driving. 2 people tried to give me a jump including the tow truck driver ...didn't work. Since its Saturday night, I can't get it looked at untill Monday.
I tried this on my 2012 dodge journey sxt and it didn't worked i tried it like 5 times over an hrs and not working at all
The remote has Neo battery the car has for the charge the battery is full full charge and still is not the started I try your track
My 2015 Dodge Challenger has been doing this!! Good info to know!!!!
This only works sometimes for me. Not each time. I want it fixed 😭
Same damn trouble , worse still is that I've invested so much changing everything...
Thank you so much for saving my 450$. I tried doing just the way you describe in the video. It work like magic. Once again thank you so much 😊
How do I start my Dodge Journey car 2014, the engine control board has refused to start my car… kindly help me out… 😢
Saved my weekend!
Ty just bought the damn thing was getting real mad
My 2018 dodge journey just randomly wouldnt start for me this afternoon, full battery, system would engage when button is pushed but no crank. Check engine light was flashing. Completely ramdom shit. Then 5 mins later it started like nothing was wrong.
Do u push it 5 times without foot on brake
Thank you so much for posting this video!!!!!!!! Great help!!!!👍🏻👍🏻👍🏻👍🏻👍🏻
This car got me stranded more times than any other car that I've ever had combined, complete POS.
Thank you!!!!Life saver!! Works on older models with keyed ignition tooo!!!
Thats great info that can help others. thanks
How do you do this with a fob ignition. Do you turn the key 5 times and then push the brake then turn key again? Hubby passed away , now trying to do things on my own
@@patmitchell9356 I have a 2009 Dodge journey. I'm not sure what year is yours is but I have the five key did that help you get your car going cuz I'm having some problems as well?
Was it getting power at all?
I put another motor in a 2012 dodge journey 3.6L after I completed the installation I had no crank no start and used this method and it started and ran well burped the cooling system and drove it came back to the shop turned it off and restarted it and it did start again but after I let it sit for awhile tried to start it again and I had a no start no crank again
Any ideas
I was driving my 2016 dodge journey, it cut off and will not start again, brake petal hard to push down, what happened
I need help please my push button doesn't work it doesn't even light up or move the guages nor anything please need help
That's so crazy mine's a 2012 and I mean everything color and all is identical to mine your radio everything. My car refuses to start once the temperatures here go below zero yesterday was plus one started beautifully this morning 6:00 a.m. temperature dropped to minus 15 and it would not turn over I'm mind blowing I've watched a million videos nothing makes sense my battery is brand new almost everything in my car has been replaced. Yesterday because it finally started with the mild temperature I was able to put in gas line antifreeze and fill up my tank booted around town a minute to help circulate and still didn't start this morning so I'm lost please help
by "start" you mean it won't crank?
Did it ever do it again? Mine wont start again and i tried this method again and it wont work😬
Omg that happened to mine this morning. I must of pressed it 5x without knowing because after a few minutes it started. Its frustrating on a 2018 model that's barely 4 mo old.
yeah that sucks that after some years they still that problem
I wish that I had known about this trick. My Journey is only 2 months old. I wrote a scathing complaint to Chrysler Customer Service, because this problem has been around for years and they haven't corrected it. Shame on them.
I have a 2015 Dodge Journey same problem but I tried this and it didn’t work unfortunately. Could this be caused by a battery 🔋 problem ?
Nope I changed my battery and problem still Exist
Thank you car daddy
Worked as Advertised! Thank you
So a good friend of mine has a 2014 Journey that won't start back up after being driven long enough for it to get up to operating temperature & after she gets back in to start it after going into a store, it won't start, no click or anything. She's had the relays replaced, the starter replaced, the battery replaced, but it still has the same problem. Anybody have any thoughts on this?
Can this work on a Chrysler 300?
It worked!! Thank you SO much for posting this!!!
Nice... You’re welcome 👍🏼
Thanks bro
It worked but know my engine light is on!!!
Do you know how to get it to go away???
well its hard to say..but i would get a cheap scanner to see what codes pop up or take it to autozone they do it for free
I have the same problem but my lights and alarm keep going off. I have to unplug my battery for it to stop
I have an 2009 journey and have the same problem but I do not have a put button start. I wonder how i can get mine to work??
Having the same problem .Did you ever find out what the problem was?
I have a 2009 SXT 6cyl. Same problem. I put the fob in the off position. Then turn the fob to acc, put the shifter into neutral and rock the shifter side to side in neutral. Then while still in neutral, I turn the fob all the way to the left, then all the way to the right to start it. Sigh ...
instructions: 1. With brake not depressed, press start button until it is in the run position. 2. Then depress brake 3. Then gear shift should release, put it in nueyral. 4. Then push start button. Voila!
No go lol I hate this truck
Didnt work for me either
My mother bought one of these. It refuses to start more often than it agrees to. We'll never own another Chrysler.
Why didn't you start the engine as a proof of concept?
well all you have to do is look at the amount of likes n dislikes and it has worked for a good 90% of people. but ill keep that in mind next time 👍
@@FRANKOLANOTA I have a 2014 that will not sync with the FOB. I have tried pushing the start button 5 times to clear the security feature. Another person claimed to start the engine by using unlocking, and locking the vehicle while inside the cabin but that doesn't work.
@@avidtraveller I haven't heard anything like that but its always worth the try. honestly this was a rental car and I was going by what they told me to do from the rental company n I was lucky it worked
Have to change the Totally Integrated Power Module (TIPM) This Should Have Been A RECALL By Chrysler.
totally agree with you on that
It was a recall on older models,problem is they didn’t fix the problem for the newer vehicles ..
Thank you so much it works ❤️
This was a very good video, thanks
RICHMOND ASANTE MR DIY thanks 🙏
I had this happen to me. Thanks ill try next time
What if there's no button??
I'm having the same issue with my 2015 charger I can press the button to start and I get power but no start and my pedal gets really stiff
Same here did you figure out the problem??
Same here. I bought 2 batteries this year and now its doing the same thing. This does not work for me. Any solution yet?
Hay you guys my coworkers had this same problem today and this video mite work for some people but it didn’t work for us! We tired everything and nothing seemed to work so I finally said for get it let me call dodge and see what els we could do so I call and you guys would never believe me when I say this but!!🤗🤗🤗 if you have a push to start and have this same problem just put your unlock key in your hand and push it on the start bottom🥰🥰thank me later and subscribe to my channel‼️‼️
@@aaliyahmukbang9836 I love you
@josh 🥰
It worked!!! Thanks!
So when you press the button it stays on run after five times and nothing
It’s work thank you
It works thank you so much!
Wow this helped.. thanks alot!
my car problem is i push the button of start but it going acc i push it again but it going off
2016 dodge journey will not do anything. Any other suggestions? Changed battery
Did u ever figure out what the problem was? Mines doing the same thing
Thanks! Very helpful!
Worked the first time but do we have to do it every time now? I'm gonna check in the morning if it works again.
on this car i only had to do it ones and it was fine after that..
Thank you so much!
Worked perfectly!!! Thanks!!!
Alyssa Smith 2005 glad it worked
this video helped! thanks
How about same symptoms but no push to start button
I have a 2009 SXT 6cyl. Same problem. I put the fob in the off position. Then turn the fob to acc, put the shifter into neutral and rock the shifter side to side in neutral. Then while still in neutral, I turn the fob all the way to the left, then all the way to the right to start it. Sigh ...
Thanks a lot Bro!!
yep!! my 2013 had it happen!!
But why does it do that for? What’s the point? Because I was just driving and then it just never came on again after I turned it off.
Yeah not sure same thing i had it didn't do it anymore after that
Well I just tried it and nothing happened battery is good. So what can it be? The alternator ?
@@RevivalMuzic It may be but it is difficult to say without having a diagnosis. recently I was breaking my head with my infiniti g35 that did not start and in the end it was something as simple as cleaning the battery terminals well.🤯
Clean terminal that has positive and negative together held by a nut ! Its corroded
I have the exact same problem now, but I couldn't start this vehicle. 2015 dodge journey.
I really need help!!
Emile Gafeza disconnect the battery for 10 min
@@HumpD624 I followed your steps and it finally worked out for me. Thanks!!
Emile Gafeza yes!!!! So happy it did! It’s happened to me a lot because my 2 year old likes to play in the car, with no key, and that’s what triggers it....but nothing is working for me now. Ugh