How to change a rear wheel bearing on VW PASSAT B6 [TUTORIAL AUTODOC]
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- How to change a rear wheel bearing / wheel bearing kit / hub bearing / wheel hub bearing on VW PASSAT B6 [TUTORIAL AUTODOC]
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AUTODOC app - interstitials....
🛒 Products you'll need for the job:
Wheel Bearing for VW PASSAT B6: www.autodoc.co...
⚡ All video and PDF tutorials on replacing VW PASSAT B6 parts: download and watch at AUTODOC CLUB - club.autodoc.c...
► How to replace a tailgate gas spring on VW PASSAT B6 - • How to change a tailga...
► How to replace front wiper blades on VW PASSAT B6 - • How to change front wi...
► How to replace a front ball joint on VW PASSAT B6 - • How to change a ball j...
Mobile shop: m.autodoc.co.u...
📢 Find AUTODOC on social media:
TH-cam: / @autodocuk
Instagram: www.instagram....
Facebook: / autodoc.de
TikTok: / autodoc.eu
#autodoc #autodoctutorial #autodoctips
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
![How to change front wheel bearing on VW PASSAT B7 Saloon [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/ba7iTfboUYk/mqdefault.jpg)
![How to change front wheel bearing on VW PASSAT B6 [TUTORIAL AUTODOC]](/img/n.gif)
I love how its always a easy job. You would think that they have already done it off camera then do it again
Id love if those caliper screws were as easily removable as in this video 😂
I really like the video of this guy working on cars. He works so well
We are glad that this video was useful to you!
FWD : 200nm with Wheel in the air + 180´degrees with Wheel on the ground. ....4wd hexagonal bolt : 180nm in air + 180 degrees on ground. .....4wd 12 Point bolt : 70nm in air + 90 degrees on ground.
Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.
Bro that is so tight
The video is fast, good and to the point BUT you should add the torque values somewhere in the comments or lower section.
You don't have to do them just give the info.
Thank you for your comment. Unfortunately, it is not possible to specify the tightening torque, this information can be found in the technical documentation for the repair of your car.
AUTODOC
video just saved me $400....
I love you guys! You guys are awesome!!!
Does this include ABS sensors, or is there extra steps for this? I'm facing a massive bill on my Passat 2010 110hk right now, and if I could save around 50-100% of a monthly salary, that'd be great.
Also, if you're changing the brake discs on the rear of the same car, is there any conflicts with the handbrake? I remember running into some issues there when I tried to change the rear discs on my Peugeot 407 from 2007, my Passat has electronic P-break though.
Thank you for your feedback! In whole the replacement is similar, but there can be differences in car constructions. Therefore, you need necessarily all the specific tools to successfully carry out the replacement and parts mounting.If you have an electrical handbrake, then you need to turn off it in the system and then to carry out the dismantling. Best regards, Autodoc.
Thanks for responding! I found a video where one of the parts sellers in my country showed how to do it while using the same model as my car for demonstration. :)
No torque spec again. And just to let you all know there is a washer behind the bearing it sits between the bearing and spindle. Nothing like all the “experts” you talk to and no one not even the guy you order the parts from is smart enough to tell you. If you do not install this you will have play in the wheel and a horrible thumping noise as the wheel rotates.
Thank you for the feedback! Thank you for your valuable remark, we understand that it is a rough mistake. Our new videos will include this information and also will show how to work with a torch wrench and specify tightening torques. Best regards, Autodoc.
Wait! This might just explain why a bearing I had replaced exactly one year ago has worn out already. (Play in the wheel and occasional clanky sounds.) So it might have been improperly installed. Do you have any links/pointer to diagrams/documents that would show the washer placement clearly? Would help greatly when I need to argue with the shop and prove that they've made a mistake in the installation.
Great video. I dont need to see him sweat just what I had in store.
And the tightening torque??
Thank you for your feedback! To save the time in the video some stages of the repairs might have been excluded.. In practice the torque wrench should be used. Best Regards, Autodoc.
Wow this seems easy
Hi! Thanks for the feedback, we are trying to make the best videos for you.
This looks like it's for the FWD variant, right? Presumably without ABS in the back. The AWD version with ABS on all four wheels would use a different wheel bearing, with four attachment bolts and a sensor, correct?
Thank you for your feedback! Thats right, The design of the rear hub is the same as you said with four attachment bolts and an integrated magnetic sensor. Best regards, Autodoc.
I like that the bolt was loose and new and the bearing came off like nothing nice try
What are the sizes of the spline tools to take the caliper off ?
Thank you for your comment!
To dismantle the caliper, we used the XZN M14 key.
Best Regards,
Autodoc team
Is it same for b8 passat or anything changed?
Hi! In general, the replacement will be similar, the only thing may be slightly different in the design features of your car. More accurate information can be obtained in the technical documentation for the car or by contacting the service.
Is same wheel bearing for 4 motion passat?
Unfortunately, it's hard to say anything, we recommend contacting the service of your car.
AUTODOC
What tool is that
You ain't breaking loose those 250lb caliper braket bolts with that ragigty swivel and 3/8th wratchet.
Is it professional to hang the calipers on the break lines?
Than you for your feedback! You are absolutely right, once should hand a brake caliper in order to avoid damaging a brake hose. Best regards, Autodoc!
My passat b6 makes a noise when at around 40 to 50 mph coming from the rear. It sounds like a hollow wobbling kind of noise. Is it the bearing or the tyre making the noise or something else. Someone said its to do with the geometry but what the hell does that mean???
Thank you for the feedback! We strongly recommend you to visit a specialized car service center. Best regards, Autodoc.
That's it? That's all there is to removing a rear bearing on an FWD B6 Passat? Dang this job looks like a piece of cake walk. But, Im concerned about the Washer replacement issue I see referenced in the comments here. What is the VW OEM Part number for this "Washer" ? Does the washer easily remove?
Our videos are for guidance only. All routine replacements and values can be found directly in the technical documentation for your car or use the help of a car maintenance service.
AUTODOC
180 nm +180 degrees.
No grease on the spindle and nothing torqued ‘auto doc’
In the new videos, we have already fixed a number of problems, we will be glad if you rate the new videos.
AUTODOC
Bad mechanic, leaving the break calliper dangling on the brake hose. Tut Tut!!
Thank you for your comment and attention to the details! We agree that this is a big mistake, the caliper should be hung with a hook so as not to damage the brake hose, in the new videos we will definitely show it.
Best Regards, Autodoc team!
From what I've seen, I could never recommend taking advice from these guys. Hanging brake calipers on the lines, no torques...all sorts of missing steps. Appalling.
Thanks for your comment. We are constantly working to improve our videos.
AUTODOC
I think you don't understand the purpose of the video. If you need torque specs look at the oem datasheet, if you just want to know what you're getting into before starting a project like this, then these videos are perfect.
No torque settings?
Thank you for your feedback! You can find this information in the Service book for your car. Best regards, Autodoc.