ฝัง
- เผยแพร่เมื่อ 13 ต.ค. 2024
- DISCLAIMER: All the speeds that you see in this video are not real, it is only a marketing trick for entertaining. I drive only at legal 20km/h.
Finally, I have made the 500W motor work on my M365. Not only it works, it actually made my scooter very fast! I would say too fast... As all the parts are mounted "temporarily" I still have a lot of work to do to make the solutions permanent.
At least now I enjoy really decent brakes and with an aftermarket controller, I am not afraid to use the regen brakes anymore :)
I purchased my stuff from here for the monetization money of this channel (the links are NOT AFFILIATE LINKS):
Controller Grin Phaserunner: fasterbikes.eu...
Cycle Analyst: fasterbikes.eu...
Fake "Monorim" motor: www.aliexpress...
Front brakes kit:
www.aliexpress...
X-tech caliper:
www.aliexpress...
Thank you for watching, see you in the next one!
Love these super in-depth technical videos on electric scooters. You’re content is awesome! Keep them coming!
Hello, thank you very much for your support! :)
That is the real motivation to keep them coming.
Me Crusing in A car peacefully. SEES A SCOOTER @ 60 kmh 😂
I am getting old I think. Was riding yesterday another scooter at 60, thought about how would I look after the crash and slowed down to 30 :D
@@VRMinde Be Safe Prolly
Great video like every time 👍 and a good solution to install the brakes! That's means there will be more videos from you 😂😂😂
😂😂😂 good one 😂 thanks bro! 🙌
Thanks for the great video!
I am using additional 10s2p in parallel and 4s6p in series (18650 cells) with Monorim motor at the front wheel. Using stock controller at 510w (27/55A CFW). Acceleration is identical to yours. Top speed is more than 48km/h when battery is above 55%. (Vmax 53km/h with full batteries).
There are no wobbles, i assume this is because of FWD. Using a solid 10x2.5 tyre at the back with the cheapest suspension on both axles.
Looking forward a double motor setup at 72v! Good luck and stay safe!
The wobble is only if I let the bars move to the sides a bit and I think it is because of my battery being heavy and so high above rhe deck 🙄
Thanks for sharing mate!
How u all connect from 10s with 4s battery?
Make a video for us to see 🤷🏼♂️
Wow your my idol bro! Your scooter is a beast!! Pls keep on making upgrade vids for you xiaomi..I just bought 350w motor as you know I have the RITA external battery setup (36v). Do i need to upgrade the controller? I feel like there is vibrating going on when I accelerate with this 350w motor..hoping for you advice
Hi mate, thanks a lot ;) controller needs upgrading only if it starts overheating. Check the temps in the app after your normal “long fast ride”. If it is below 75C don’t worry too much. Replace the cooling paste under the controller housing.
Pulsation can be you reaching max amps that you set in firmware maybe?
@@VRMinde thank you for the tip buddy...I will look in the the cooling paste....should I be setting the Amp to 65 or a bit lower (cfw)
@@whatstreetzentertainment6189 65Ax42V is 2.7kw. I doubt your battery will ever produce that much and the controller would burn in a sec :)
I fitted a scooter Carrier. I baught from Ali … it’s like a mountain bike carrier and I fitted the battery bag to the carrier.. the rear carrier bolts on to the axle bolts 👍🏻🍺
Sick i just got my scooters and been looking into it! gonna try it out for sure! you in Denmark? o.O
Yes I am :) enjoy the ride mate :)
Try moving the battery in front of the steering. I think that will solve the stability problem and will make it extra stable when shaking.
Might be a good idea, actually!
hi, great video, you should change your handdlebar for a bigger one (something like a mtb one), this will give you more stability. You only have to open la existing hole in the suppor from 22mm to 25mm with a drill and it will fits perfectly. Greetings from Argentina ✌️
Hola! ¿Todo bien, boludo? :) thanks for the info, it is a really good idea! I do not know if I am going to do that on the m365 as I already have a couple bigger scooters, but with increasing speeds it is a definitely good idea.
Great video
Disclaimer game strong too! :D
Thanks man 🙃
Sheesh… Mine is Squirrelly and uncomfortably shakey to ride at 16mph.. But I get it..🤙🏻
yeah.. it is not smart to do this to m365 :D
to get a "dual motor" feeling you'd atleast want a peak of 150 phase amps but idk how much those motors would like that first of all, and secondly idk if the magnets themselves are strong enough to deal with that current
those big power scooters which have only 28A (battery side current) controllers for example peak already well over 100A in each motor at low speeds, hence why they're often so jerky
the phaserunner can go up to 90A phase or something like that so i'd recommend to try that
Phaserunner is ok, but only to play around as the setup becomes economically not viable :)
@@VRMinde yea i'd say those Flipsky/Makerbase Alu PCB VESC's are a good option for someone who wants a bit more oomph for not too much of a price, have a pair of them 75100 Alu PCB's in my dual motor scooter with 120 phase amps peak each and they do just fine
i have a pair of 75200 Alu PCB's ready because they would suit these motors better, but just 50A is not quite much, afaik the Ninebot Max G30 peaks at like 60A out of the box in a similar motor to that, which is why i mentioned 90A being probably a happy medium if you monitor the temperature
btw ik this is old but on other Xiaomi stem batteries they're mounted on the other side, like away from you, which would maybe help with balance, if you still have this thing around
I thought about it as well :)
love the video man would you do a breakdown on the parts used and install tutorial?
Thanks mate. The key parts are linked in the description, I am in doubt if I will do a step by step guide as if someone wants to go with a replacement of motor, controller, battery, dashboard, brake caliper - probably he/she will use some different parts and steps will be different 🙄 installations like these do not make sense, there are cheaper and better scooters that have everything readilly installed 🙄
Wow bro, cool video. Right now im build my own pro 2, with original monorim motor, controller and special hq battery on 21700, 26 A. And moment with tire was best in your video, try to use Huangcheng tire.
Hi mate, thanks, good luck with your build!
I’m running 20s with kaabo controller gt-100 2 500w monorim motor coil rewinded Y C B connection turbo config 48km/h is nothing tbh but keep it up 👌
You are crazy man 😅 I am not normally riding these scooter at such speeds. I am riding motorcycles and electric bikes instead :) I do not trust tiny 10” wheels 🙄
Hey buddy, i can see you are from denmark as me, nice videoes on these little scooters :) Where did you order your mods so you dont have to pay customs? :)
Hi mate, I buy manority of things from geekbuying or aliexpress and I do pay the customs pretty often :)
@@VRMinde thats one of the worst things about denmark, customs.. haha i just got a pro 2 and want to mod it, what should i start with?
@@dazbrugernavn it depends on what do you miss? :) speed? Range? Comfort? Maybe you just want to customize the looks? There are guys in Spain making full sticker kits that can change the volor/design of your scooter and it will be unique :)
I even let ads play through if that helps your channel ❤️👍🎶
Thanks bro! I think it does, I am not super good at all that monetization thing :D I am allways choosing “only skipable ads” for my viewers because I don’t like them myself :)
Is it really a m365 after changing the esc? With little mods the original ESC is 20S capable and can go 60km/h+. It's an excellent little thing for it''s size and price (goes as low as 20$ from china atm, how do they do it? 0o). Also I don't get people putting something like a VESC in a scooter this size.
Sorry for the rant, scooter looks awesome. Wish we could encounter each other on some random road and have a drag race
I don’t know mate, what else should I call it then? Phaserunner 365? 😅
I am too dumb on electronics probably. I have burnt way too many stock controllers, even with 12s pack and new cooling pastes etc., mine runs at 78 degrees after 20-30sec sprint and the temperature keeps going up 🙄
I have some that simply won’t work and I can’t find the defect - MOSFETs are fine, fuse is ok, something else is burnt and I can’t find what it is. All of that lead me to too much frustration with those stock ESCs…
@@VRMinde Call it franken-rocket 365+1 or something :D. ..Yea the first revision was quite fragile and often died on it's own. Often you killed the DC-DC converter (40v->12V) because of voltage spikes while braking or just looking at it funny. But everything got alot better in the last 2 years or so. The y made a new board revision (2.0 and onwards) that hold up every abuse I throw at them. But if your setup works for you, no need to change anything.
How does your motor not overheat at 2.5kW? I weigh a little over 70kg, and have an electrically stock m365 pro with stock tires. I use custom firmware that is limited to approx 850W, and use the ECO mode (the current in eco-mode is clearly less than in all other mods) that is limited to approx real 20kmph (usually it shows about 22-23 on the display). After riding the scooter for say 10km the motor is already hot to the touch at 30C ambient temperature.
I never have +30 here, that is one thing :) And also it would overheat if I would run it full power all the time. I do not run it full throttle, it is overheating otherwise..
@@VRMinde so its basically "boost mode", gotcha )
Hi! Thank you very much for your instructive videos, I like them. I am interested in buying the Xiaomi Essential, which is the basic one but then to upgrade with the 500W Monorim Motor + V48 14.4 Battery, and then I'll add some stuff to make it drivable under the rain. My question is, do you think it worth it with this model of Xiaomi Scooter or should I buy the M365, I guess that the most basic and cheaper one is good as long you upgrade it, as the others brands cannot be upgraded as long you don't have someone to design your battery to fit in the scooter. My questions are, do you think it worth it to buy the Essential and upgrade it with the stuff I mentionned, and also do you think these stuff are great or there's better things? I don't want to spend more than 500-600€ and for everything it already cost about 495€. Also, do I need to buy a new heat controller? I really don't know about that so if you have any recommendations I would be glad to know! Thank you very much for your time!
Hi mate, thanks for the kind words. I believe you will end up spending more this way than saving for ready-made upgraded solution. You will get the smaller battery by 1/3 in essential that will be useless for you, but money aready spent. And if you do not understand a lot in mechanics and electronics - expect that projects like that take much longer than you would expect and you do (expensive) mistakes on the way. If you want a fast scooter with 2wd and double suspension - buy a built solution and you will have so much less headache :)
@@VRMinde Thank you very much for your accurate reply, I thought it was easier in the idea to plug the battery, the motor wheel and that's all, but if it's more complicated than that also with the controller, to make it properly as I don't have any knowledge in mechanics and electronics, maybe better then to buy a full built e scooter, I would like to size the opportunity to ask you if you have any recommendations in some models that could be great for me, is the M365 Xiaomi good? It's anyhow 25km/h limited speed and I don't need more than 30km. I wish you the best and thank you again for your kind answer!
@@MrSyroj if you can - get m365 pro/pro2, if you can’t get the “normal” m365. Alternative - Segway Ninebot max. They will all drive 30km/h on full charge or close to that (with some simple custom firmware installation).
If you want something offroad capable, with great acceleration and 50+km/h max speed - I love the cyberbot mini. But there are more great scoots as well, I just have not tried them
just saw your video, i upgraded my M365 with Monorim front and rear suspension, want to get more acceleration now. You think it should be enough to buy a happy bms + 48V battery? I am not looking for incredible max speed, more important is hill climb and accelleration due to my living situation.
Battery is definitely the bottle neck 🙄 the risk to burn the ecu increases if course and if you climb long enough motor can burn as well 🙄 but battery should be the starting point :)
Thanks for the idea of alternative controller. Looks like phaserunner is really good for this. Have you had a chance to check difference between this fake monorim motor and original 500w's one?
Hi! No, I was stupid enough to think this was genuine monorim when ordering :) I had no doubts phaserunner was good, but it is also very expensive!
@@VRMinde Hi again! My M365 Pro hub motor got fried a few months ago.
I looked for a genuine motor for months but couldn't find one, so I decided that I would get the Monorim 500W motor. I have been thinking about it for a month now and I was about to buy it today until I saw your video. There are some other websites selling this motor as well , they look really close to the original and have the logo on it.
I'm willing to buy it from the official Monorim website, where did you get yours? I loved the video as always, good to see you're enjoying yourself 😁
@@proxyhx2075 hi mate, there is a link in the description if you want to find where I got mine. But mine is not genuine for sure. It is hard to understand as I have also purchased other genuine monorim parts on aliexpress… This should be their genuine website: www.monorim.store
@VRMinde @VRMinde Yep! I wouldn't trust the Aliexpress stores either since they often get it from different warehouses. So they get it with the same package names but they aren't real, or the store is fake altogether which might have been the case for you.
I was hoping to buy it from the Monorim site you linked either way, thank you for the answer mate. Also good luck on the project! :)
its the same i guess. even when copy there is only copper and iron inside. its not an iphone ...just a motor.
love ur entertaining tricks, might make some myself even
Sure do mate! :)
Makes me wonder, would the stock (V3 + reinforcement mod) controller handle 48V and the 500W motor full throttle for 8 to 10Km? I'm all about modding, but I'd like to keep it as close to stock as possible (sleeper beast)... Right now I'm only rocking the stock m365 classic unlocked with 10" tires (going about 30~32Km/h with custom firmware, but torque is not so good), thinking about an AliExpress 13s battery on the frame along with stock battery and Rita for extended range, then the 500W motor (but I really would like it to have an inflatable tire, not that solid tire)
I was riding with 12s looong time with no problems. I think it could work, monitor the temperatures of the controller. And disconnect regen braking
@@VRMinde Thanks! KERS is off, but I think it still send power back to controller when braking (as motor brake still works, albeit pretty weak), I'll look into that. I ordered a pre-modified (reinforced) V3 controller to squeeze a little more of my current setup without crushing the V2 controller, then I'll go this route with battery, then motor (hopefully someone publish some kind of guide to mod it for inflatable tire support until then), thanks again! 👍
Hi Bro, I will try to install in my M365 16s BUT what was motor temperature in you M365 on 14S battery at 2KW ? . After some tests , on 12S and 2KW, Pro motors got super hot ( shell over 70C ) due to higher amperage .
Hi mate, I did not test it for too long I think. For short runs of 1.5-2min it was ok 🙄 maybe higher voltage raises temp less than higher current at the same power? Also 500w base and 350w base might react different to the 2kw 🙄🤷🏻♂️ just thoughts
@@VRMinde well Higher voltage means less resistance ,so lower temps ;) , aaaand at the same time with higher Voltage we can lower the amps to achieve the same wattage. At least in theory it should works this way , but who knows how thin m365 motors will work ;)
@@PirateWasHere will be following your content to see the result in practice ☺️
Hello there! Is the front suspension a Monorim? Or a knock off of it?
Front one monorim with a double air chamber shock 🙄
Wear did u get this from nice
Great video, love you channel.
Thanks man, really appreciate the comment. Have a great day!
Hi, Can I use the Monorim 500w motor with the original 36v battery? Will it increase speed?
You need more juicy battery first, then motor
Mine with 15s battery stock modified ECU and pro motor can do 45kmh, i think you should increase voltage and get better results with it's also better to assemble one singular battery instead of using two in series.
I could go more amps 🙄 this controller can do 50. More volts of course. More field weakening as well. But I am not sure I need any more :) motor gets to like 60degrees now.
Probably I will do a 16s battery, but reduce the amps
hi, can you share the modification steps of how to make the stock ECU run above 14s battery. thanks
@@minalobudeshte I can’t mate. I assume it is enough to make thicker traces and replace the capacitors, but I am not sure if there is sometging else that needs replacement. I burn my stock ecus with 13s-14s packs, I do not consider them good for anything more than that 🙄
@@VRMinde thanks
@@VRMinde first of all stock MOSFETS are not strong enough I replace them with IRFB4110 for instance second if you push more than 54-56 volts (I think dont remember the actual value) your MCU is getting more than 3,3V (the max rating) if you don't change resistors or power it with lower voltage it will die at some point
Do you have the extended bolts on your monorim fork or why your wheel is looking like it is not fit properly? I habe exacly the same fork including the disc brake kit and habe also the rim, which used to be in the rear, in front and have any Issues with the disc mount screws
Hi,
If you open the link (www.aliexpress.com/item/1005002471451575.html) you will see in the first picture what did I get exactly with the kit: 3 extended bolts with spacers, “gasket” for xtech caliper, the red plate with 2 small bolts. There was nothing else. It is supposed to fit the rear wheel in the front.
@@VRMinde it dont find the site behind the url for some reason. Do you mean the Black round gasket with the hole in the middle? I thought it is for the reboundlimitor kf the spring abd did not installed it. There where missing a lot of washers in my Set, maybe you need to get some to make the fork wide enough.
Is there a way to send you pictures, i can make some of mine if it helps
@@johnathankrausrig9237 try and find the same url in video description. It is not really a gasket it is what they call it. By gasket I mean addaptor plate for Xtech caliper. I have all the spacers I think, I just don’t have the wheel axle extensions. If I flip monorim plates then my wheel axle is too narrow and the wheel won’t fit.
You can send pics to my Instagram messages @VRMinde
@@VRMinde there is no need for a wheel axle extension. At least on my rim
Why did you decide to use Phaserunner and not some variation of VESC controller for example Spintend UBOX?
I had one on my bike that I was not using right now 🙄
@@VRMinde cool, thanks, great work :-)
Also I think that the monorim brake adapter is made for xiaomi motors isn't it?
@@vlceon thanks for the support man!
@@vlceon if you take a look at the product link - they say it is made for moving the motor to the rear of scooter and using the rear wheel in front.
If you would like to mount a motor in front with this kit you will miss some axle extenders as the motor axle will be too short to mount the brake caliper and fit in between the forks. Ask how I know that 😅😅😅
Can you do a review and modification of the Xiaomi Mi Essential scooter speed 50km/h?
I was actually filming the essential. I got like 24km/h with just the cusom firmware. After replacing the battery to a standar m365 battery (essential has a smaller battery) I got to my standard 28-29km/h. I will make a quick vid on that.
To make it 50km/h it is not worth it practically or financially because you need at least 14s battery pack + new controller and possibly a new motor as the stock one will get very hot. It is cheaper to buy another scooter capable of 50km/h + with suspension etc.
@@VRMinde When you make the video of the Essential you also put the link of the highest battery.
@@Paky31Ta I will not have the link mate. I used a stock m365 pack from my other scooter. I have no idea where to buy bigger packs, I am now making my own 🙄
you should employ a HUD display for easy monitoring bro
Sounds like an idea 🙄
bro, just wanted to ask what bms you used and app. i've been trying to figure out what smart bms would fit the reention cases for a long time now.
Oh, I have replaced the bms from www.lithiumbatterypcb.com/ Still works today (4 years plus)
@@VRMinde thank you so much bro! Appreciate it alot!
Can you do an explaining video how did u did it?
Do you want like a step by step guide? Because this video roughly explains how I did it :) I replaced the motor, the battery, the controller, the suspension, tires and brakes. It would be a very long video if I need to talk about every bolt and cable mate :)
Super Video,sehr informativ 👍
Thanks man! 🙌
Can i. Update my ducati pro3 speed limits i can drive only 24kmh stock
Hi, I have no knowledge about your scooter mate
Hey. I wanna instal this plate for battery (like hailong) on my m365. But i dunno how to change 36 to 48. I can find modified 48v controller (original), and i have 48v battery. So, is this setup needs something more like “fake bms”? For connection non original battery. Or…
“Rita” will not help me, coz its for second battery and 36v
Hi, BMS should be in your hailong pack already.
To use 48v pack you can still use the stock controller. What you need to do is to change some parameters in the controller firmware: turn of the regen braking (or the controller will burn in no time), set battery voltage limit to 58.8v, remove “charging mode”. That should do.
@@VRMinde Hey. Has do it! I can’t understand one thing - how to power the tail light? In stock it goes across the battery block. Will dс-dс be required for this? Or can I directly forward from the diode to the controller?
@@ИльяГригорьев-ю1и hmm. Good question :) it might survive the higher voltage 🙄 maybe 🙄 otherwise you will most likely need some dc/dc. I think it worked fine with the 12s pack, but I can’t remember for sure now 🙄
Hey mate, hvor meget ville et external battery koste til Xiaomi M365?
Aliexpress 100 usd maybe
from where you bought the motor bro?
There is a link under the video in the description :)
I have a stock m365 battery, with an external 13s4p external battery , also using official monorim 500w motor. Need to buy a decent controller that won't burn out! Any recommendations please. I was considering the flipsky 420 plus but not sure. What do you think??
Well, I have never tried the flipsky controllers yet so it is hard to comment.
They have double ones though 🙄 two motors feel way more fun, but then I would also consider pro chasis as only then you could fit rear and front disc brakes.
But then again the overall price gets so crazy that it is cheaper to get something like cyberbot mini (1k USD) with a large battery, better suspension, 2x500w motors and much better tires, wider steering, etc etc. :) It is a constant thought struggle in this hobby.
@@VRMinde Yeah, i do believe the flipsky 6.6 mini is compatible for dual motors, but there's very conflicting info, some say that they are 13s compatible, and others say only upto 12s! So i am really not sure what option to use?🙄 Not that i need the dual motor option anyway, as 45-50kmh is plenty enough for me, and they are waaay too expensive! Also, i have seen an upgraded official m365 controller that will accept upto 19s!! batteries available for sale from here: vtaescooter.co.uk/shop/ols/products/upgraded-controller
So i may just go for the 13s-15s option! Not to sure if i need to upgrade my internal battery to a higher mah or not?? Thoughts please. Just curious to know, are you sure that only the pro chassis are compatible with dual brakes? I thought both classic and pro chassis were compatible?🤔 Is a rear motor better than a front motor? What are your thought on both these please? So my quest for a stable controller that will last, unfortunately still continues!😫 lastly, i have a few official monorim new 2021 version stems/poles (the laser engraved ones) and official monorim 500w motors (with better 10" tyres on) for sale if your interested? Pm me if you are please.🛴😊✌
@@fleebleflam stock controller even if upgraded - I do not trust them. They overheat and burn. I know v3 is better, still don’t trust them :)
Higer mah or not depends just on your needs for riding range. Also if you go for high amperage battery it makes sense to have more cells in parallel as then you can spread the current accross more connections if that makes sense. Think like this: more cells in series = more max speed. More cells in parallel = more km :)
I am not 100% sure if a motor with a disc brake fits in the stock m365 or not. I have not tried it yet. When I was buying the rear Konyk suspension the seller told me that I will only fit the disc there on a pro model and not on m365.
I like RWD more because I believe it gives way better control, less vibrations on the handlebars, better weight distribution and easier drops from curbs, etc. But nothing beats the acceleration of two motors. Feels like a completely different scooter with two motors :)
@@VRMinde Hey man, how's it going? Just a quick update on my quest for an upgraded controller for my classic M365. I bought a flipsky 7550 vesc, a bluetooth module, & an anti spark switch for some extra safety!😊 I have yet to connect everything together, as the white connector on my (official)😁 monorim motor is a different size to what fits in the 7550!😫 So i am trying desperately to find the correct connectors, or even better still, correct adapter connectors, that will make my motor, throttle, and break lever fit, and run correctly. Once i have this info, i can then start to think about connecting everything up, and seeing if my external battery, and rita will work with the monorim motor!🤞
If you know which type connectors, or if there are any adapter that will fit my original battery, as well as my throttle, and break lever, Pleeease let me know asap. Ride safe dude🛴😊👍
@@fleebleflam hi,
Battery is xt30, others I don’t know how are they called mate :) good luck with your project!
Can i install that motor without keeping everything Else stock?
Yes you can, but it won’t provide that much of a difference. Battery is better investment
@@VRMinde okay maybe I would do that but what is the top speed with only this motor install’d 😊 without the battery ?
@@Bikey4LifeeNB it will be very similar to the stock one. The “bottle-neck” is not the motor on this scooter. Battery first, controller next, motor last :)
@@VRMinde okay thank you so much for you answer then I would do that🙏🏽 u have a new subscriber ❤️
Hello again.. i just wanna ask you iff you have a good Google drive file for the pro2 to Make it go faster ?
Do the 500w motor as a breaking system like the original motor ?
The braking is done by controller, not by the motor. Depending on the ESC you will either have this function or not. If you just replace the motor it will work in similar way as the stock one
@@VRMinde Thank you for your answer ! I found a charger for the monorim 48v battery... the charger is a 54,6V 3A is that ok ? or i need a 2A one ?
@@luisgregori3817 It is a 13s pack charger ("48V", I hope you have a 13s pack? Stock one is 10s). If it is 13s, nothing bad should happen... probably... a thicker wire for charging to the battery pack wouldn't hurt though
@@VRMinde Yes thanks!
Keep it up!
Thanks mate!
What Cfw should i Create with 72V ? How much A ? Thx
P=U*I (P - power output in watts, U - voltage in volts, I - current in amps).
If your mentioned “72V” is a 20s pack, then fully charged it will be 84V.
Depends on what controller are you using? Also how much power are you planning to send to the motor? On 2.1kw it is starting to get warm after 30sec sprint, but probably it could (????) survive short accels on 2.5kw?
So, on a fully charged 20s pack 2kw will be 23.8A, 2.5kw - 29.8A. I would be really careful going for more as the motor will be heating up A LOT. And if it is a stock controller - I hope it won’t burn for you longer than all of mine did at lower watt output :)
What is a front dumper 160mm??
ammmm trying to remember... 165 I think
how much amps is your controller?
This can run 50amps at 90v
@@VRMinde 52v 25A controller its coming for my pro 2 with screen and batteries and top speed of 60kmh
Dont use hard tires, use tires with air
What esc do u have?
Grintech phaserunner v3
Thank you for your respond
@@mohamadkhaled4916 no worries mate!
I have the ix3 scooter goes 25mph what could i do to get more power/torque
it depends what limits it..
it can be ECU or battery, most likely both
What is the rear suspension ?
KONYK, Ukrainian, very cool product th-cam.com/video/0heMaF1x4FE/w-d-xo.html
#VRMind trzeba coś zakupić by osiągnąć taką prędkość czy można jakoś samą modyfikacją ??
Sorry mate, can’t read this
@@VRMinde Do I need to buy something to get 31 mph in the xiaomi pro 2 ??
@@gragasyt8386 yes, at least a 14s battery pack, then it will be tricky if the controller won’t burn 🙄 and as the time goes - probably the next thing will be the motor
@@gragasyt8386 orginalny controller niewytrzyma napiecia powyrzej 55v to znaczy baterja 13s max. jak dasz zaduzo mocy na motor to bedzie sie grzal i magnesy beda slably. im slabsze magnesy to mniej mocy ma motor i bierze wiecej prondu i sie jeszcze bardziej grzeje. do 40 niepowinno byc problematycznych temperatur. moze w gorace dni. na orginalnych czesciach niepojedziesz wiecej niz 35kmh.
@@__Game-Over__ działa 44km a jak w powietrzu to 47 km waże 65kg na oryginalnych częściach
cool
Thanks man 🙌
Labas, galima gauti tavo kontaktus?
Labas @vrminde instagrame arba weareminde gmail
can i put a 48v battery on 500w monorim motor on stock controller??
You kind of can 🙄 you need to disable regen braking or at least reduce it a lot and watch out for the temperatures of the controller. It will be not too hard to fry the stock controller 🙄
@@barakcobrama1703 again - it can of course mate.
Put the monorim dampener on it .
I kind of abandoned now the entire project.. can't find time to work on it anymore :)
Woow ! Are you mad?!!! 🤪
Just a little :)
are you in billund?
I am, sometimes :)
Is this still running?
It is kind of split in parts today as I needed the controller for another project 🙄
@@VRMinde but motor never failed with that power?
@@regun2434 the motor no, but I never ran it full throttle for very long periods of time.
@@VRMinde ok gonna set it to about 30A@60V and see if magic smoke comes out.. I have 50h motor coming from china so its no big deal if smoke comes out 🤣
I can tell 2.4kw is too much if driven like maniac 😁@@VRMinde
Your a mad man 😂
Me? Nah mate, just a little :)
super like. Sara one day i will not on earth, but u can see my comment. u r my sweetest daughter. i bought m 365 pro, only for u.
Dr Rajeeb
Thanks for the comment mate :)
1:55 tell that to es4 owners/designers.
You can compensate a bit with different steering angles :) also this pack is really big, I think es4 has smaller one :)
well im getting 43kmh with just 700watts
Good for you mate :) I keep hearing that people ride their m365 pro on 500w @40km/h, you get 43kmh with just 700. I am very unlucky and need 2.1kw to get to 50 :) I am very happy that you all have scooters that easily reach such speeds!
Also, there is a huge difference in wind resistance when you go 43km/h and 50km/h. The correlation between the needed power vs speed is more or less geometrical progression. There is a bit detailed info here electricbikereview.com/forums/threads/interesting-read-about-the-nature-of-ebike-motor-and-efficiency.15652/
Ton guidon est trop étroit
Agree!
Он русский?
Net, litovskij