Scaling a Drag Car | Measuring 4 Link | Drag Car Suspension
ฝัง
- เผยแพร่เมื่อ 22 ก.ย. 2020
- Scaling a Drag Car, Measuring 4 Link and Drag Car Suspension tuning!
Subscribe: th-cam.com/users/KevinWilsonSB...
Follow along as I show you the process on scaling the 48 Ford Coupe, Measuring 4 Link bolt locations to plot Anti Squat and more key drag suspension tuning tips to improve 60 foot times.
This video is the first of several showing you how we scale drag cars with custom blocks to allow us to raise the car to a known height to measure all 4 link bolts to the ground (4 link plotting), crank centerline, ride height, pinion angle, shock installed height, coil spring compression and so much more. Also, we show you how front caster impacts your corner weights and cross suspension on the rear. This is part 1 of the 48 Ford Suspension Tuning Series to show how we get the Blown 48 Ford Coupe to launch and safely get down the track!
Scales used:
amzn.to/2RTu41S
Rear Shocks and springs:
amzn.to/2HqQUfc
amzn.to/2G3IxFL
Front Shocks/Springs G-Body Type Coilover Spring:
amzn.to/30313oV
Get with us to let us help you scale your car and do a complete plot of your car as it is today and then we can discuss what changes, if any, we would recommend.
We also offer online remote services from our website here below:
Samson Performance of Sam's Alignment in North Charleston, SC.
samsonperformance.com - This site has our email and suspension tuning PDF.
How to setup double adjustable shocks and springs for drag racing. How to tune rear shocks for drag racing also known as tuning coilovers for drag racing. Drag car alignment is critical as you know for your safety and the safety of the other driver.
Samson Performance of Sam's Alignment in North Charleston, SC.
samsonperformance.com - This site has our email for remote suspension services
/ kevinwilsonsbc
/ kevinwilsonsbc
KevinWilsonSBC
kevinwilsonsbc.com
kevinwilsonsbc.com
/ kevinwilsonsbc
Amsoil Products for all your high performance needs:
www.amsoil.com/?zo=5439621
#suspension #dragracing #Coilovers #chevy #horsepower #qa1 #kevinwilsonsbc #dragcar #shocks #660 #streetracer #streetrace #1320 - ยานยนต์และพาหนะ
![เจอประจำ ตอน พักเที่ยง [EP.32]](http://i.ytimg.com/vi/jvqk6uJoVks/mqdefault.jpg)
There are different ways to go about scaling a race car so in this video I show you how we do it. The main goal is to get the car up a known distance and level. That way I can comfortable get under the car and plot all my key points to build the suspension plot. Understanding corner weights and how the front end plays a critical part in this plotting is a must to recognize. I show you how a simple caster change on the left front impacts the right rear chassis height and all corner weights. The next video will go into more detail on the 4 link plot and preload with real world video. This car is and will be on M/T Slicks for our first time out, so stay tuned on how I set it up and then see the track results shared.
i'm glad you say HEIGHT & not HEIGHTH.
There's one certain chassis shop owner in the midwest that says heighth... yes heighth with an H. It's extremely annoying to hear this made up word used in his videos, which happens more than it needs to 😡🤬
You guys are doing a fine job with this series and the information is clear, your passion for racing and teaching are also clear.
Seeing how steering and suspension adjustments affect the corner weights really helps to understand the relationship between
spring compression and weight transfer. Thank you.
Junkyarddawg Fixit thanks so much for your comments and encouragement! Go fast, go straight! Be Safe!!
Wow! I was thinking 1.3x first pass and stand corrected!! Awesome work!
Big-J thanks so much for your comments! I think I can get it in the low 1.20's or even 1.19's. Go fast, go straight! Be Safe!!
I watched this video early on when I discovered your channel. I figured this was for the big boys only and I didn't need to worry about this yet. I've been slowly replacing front and rear suspension parts and watching your other videos and today it's starting to click. This is a must do on my list. Just wish those scales weren't so expensive.
Thanks!!!
Thanks Steve!! Go fast, go straight! Be SAFE!!
Oh man... I been waiting for this! Nice work so far man! 👍🏼👍🏼
Tim A thanks so much for your comments! Stay tuned... more on the way. Go fast, go straight! Be Safe!
Great video Kevin! As you can tell I'm going back to the beginning of your video series so I can properly setup the Z28 as my son & I upgrade a 'stock' F-body suspension to an all-out racing setup. I know it's cheaper (& easier) to buy a car already built but the goal here is to give my son the knowledge of knowing how to tune a chassis to go faster rather than just adding more horsepower and never understanding why some cars go sideways on burnouts & others don't, why tire shake is so bad you have to wear a mouth piece or worst of all, it doesn't go straight.
Great to hear about more father and son work happening! Good idea to keep reviewing so he can learn now how this all works together. Go fast, go straight! Be SAFE!!
Awesome Kevin!!! Looking forward to more
Scott Nettell Racing thanks so much for your comments! Appreciate all your support on the channel! Congrats to you for some good success! Go fast, go straight! Be Safe!
Can’t wait for part 2 !!!!!
steve clayton thanks so much for your comments! Next video will cover the 4 link plot!! Go fast, go straight! Be Safe!
Excellent information! Thank you!
blockequals4 thanks so much for your feedback and I look forward to other videos! Go fast, go straight! Be Safe!
Man wishing I’d followed you while I was building this car. You sure clarify Everything
Russ Turner thanks so much for your comments and encouragement! Go fast, go straight! Be Safe!!
@@KevinWilsonSBC I’m racing in the Detroithoodtv pyop November 7 I’m going to put your knowledge to work thanks
I’ll let you know if I need to talk to wife and to take a vacation in South Carolina
Keep me posted! Happy to help out for sure, even remotely. Go Fast, go straight! Be Safe!
Thank you so much for your videos. About to tackle a 3rd gen camaro. Stock style suspension deal
bryan tucker thanks so much for your comments! Go fast, go straight! Be Safe!!
Great knowledge man 👍
Appreciate it! Go fast, go straight! Be SAFE!
Wow! ! !That thing is heavy ! ! !
Michael Hyatt thanks so much for your comments! Unfortunately, I still have a few pieces to still put on it. Ugh! I think it is time to find a lighter chassis to play with soon. Go fast, go straight! Be Safe!
Kinda long winded, huh?
Clayton Blanchard thanks so much for your comments! It is hard to script this stuff out but fair feedback. Go fast, go straight! Be Safe!!
Do you keep repeating yourself cause you cant remember or do you think the viewers can remember what you said 30 seconds ago edit your self
Paul Tavres thanks so much for your comments and LOL! At my age and all that is going on these days I am doing good to remember anything! Anyways, all comments are welcomed so thanks for taking the time to comment! Go fast, go straight! Be Safe!!