2001 GMC Jimmy | Rough Country lift
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- DISCLAIMER Content is aimed towards adults Rated PG
We bought a 2001 GMC Jimmy Diamond Edition for the wife a few months ago. she decided she wanted to lift it 6 inches. After digging through the interwebs we found a Touch Country 6in suspension lift kit. We made the purchase then put it on her Jimmy. This video shows most stops we took installing the kit. It ended up taking roughly 28 hours total. We ended up changing the front ball bearings and that took about 3-5 hours due to them being originals and being riveted in. All-in-all it was a fun learning experience and now she has her lifted vehicle that she loves!
Instagram: @kyrstynrheagoode
Facebook: / thekcubedstory
Twitter: @KyrstynGoode
Please don't forget to hit that Subscribe button if you want to be notified of upcoming videos. Give us a thumbs up if you enjoyed today's video and leave a comment letting us know what else you would like to see.
Nice diamond edition 🙂 I put the same kit on my GMC Sonoma last year it took me about 16 total hours by myself!
Thanks! It took us more time due to not rushing and just taking our time.
Actually what took the most time for me was getting the correct cut on the diff the cooling fins had to keep taking it back out and putting it back in till I got it right LOL
@@waltersteffensthezr2man431 insta?
That was actually easy for us lol. Cut once lol
Awesome. Thanks for making the vid. I'm very tempted to do this on my 2001 Jimmy. It doesn't look half bad with those tires.
Where's the Jimmy clubs?
Awww, what a little cutie in the back lol.
That looked like a shit ton of work lol. I like the end result. A little too high for my taste but it did look pretty nice in the end
It was a lot of work. But it wasn't too bad to be honest. The wife liked the look as well.
I personally own a 2000 diamond edition with no rust on it and 98k miles and i want pit new suspensions parts on to make it ride smoother but all i can find is people lifting them.
Awesome job kyle! That car looks way better with those tires
It does! My friend did most of the work while I did the learning and replicate what he was doing on one side I did to the other.
Great build, looks awesome! I really want to relocate my rear end under my leaf springs. What was the kit you used?
can this kit work with a blazer as well?
Check their webpage. I think they have something for the blazer. But it might be the same exact setup.
yes
Nice, how are your doors so nice? My hinges are so messed up and I've already replaced them once. Bad design from factory.
We only ever had issues with the passenger side. But even then it wasn't bad at all.
I'm about to do mine for the third time, since I've owned the truck.
Y’all reused the factory control arms? You’re supposed to use after market ones from Rough Country because the older ones sit too low. There will be too much tension on the ball joints. How did it work out?
We did reuse them. However the kit comes with brackets that lower the mounting points for the factory control arms. It worked out great to be honest.
What bull bar do you have on there?
How has the truck held up any issues with the gearing running the 33s daily?
We ended up selling it last December so not sure since then. But until we sold it, it held up well.
Did you have to put any brake line extensions in or anything like that? Driveshaft and axels still bolt up easily?
Had to put in break line extensions but they have with the kit. Everything else basically bolts back up.
@@thekcubedstory940 thanks buddy looking to do this to mine this winter! Any tips or heads up I should know about?
To be honest I didn't do much of the work. My buddy did. I was more or less there for support and learning. I am not mechanically inclined but thought it was pretty straightforward. As long as you have some inclination of how to work on cars you should be good.
Is the vehicle right hand drive or is the camera mirrored?
It is the normal American Left had drive vehicle.
How many miles in that
Nice job! Where are you located? I am in washington state. I need too do same my blazer! How much! Send me more info please.
got a few jimmys i would get some 31s for it lot better off road
Putting this same lift on what tire size are you running
To be honest I can't remember if we did 32s or 33s. We sold the truck a few months ago otherwise I would like. Sorry!
How long did this take I might do mine but idk yet
It took us about 28ish total hours. Probably could have done it quicker but we weren't trying to rush it.
@@thekcubedstory940 and I have one more question did you do a center console delete cuz your kid was walking around like it was a school bus 😂
Nah she was just crawling all over everything lol your typical 3 year old! Haha
Where can I get that kit
It is a Rough Country Kit. Straight from Rough Country.
I thought this was a video about lifting your truck I didn’t realize it was a video about a plumber. Buy longer shirts 👕
Consider it a bonus
😂😂🤣🤣
@@08maybeoneday blazer and booty what more could you ask for😌
Thank God they didn't do this to a square body s-15 jimmy