How to fix a dripping toilet - water leaking inside bowl
ฝัง
- เผยแพร่เมื่อ 18 ต.ค. 2024
- Korky Flapper amzn.to/2MyJmJU
It's easier than you might think to fix a leaking toilet. Almost always the leak is from a bad flapper. It takes less than 5 minutes and you don't need any special tools to do it. Don't worry about the water in the tank being dirty. It should be clean. It is certainly not the same as the water in the bowl even though they are close, the water in the tank hasn't been contaminated with sewage.
Great video. I never knew a flapper could go bad. My water bill was 158.00 dollars for a month and now its 72.00.
Crazy how you pulled that off with one hand. Not enough credit for that 💯 Thanks for the video bro 😎 👊🏽🦍
Thank you so so so much! This video made it so easy to install and understand what to do! You’re the greatest!
Thank you Andrew. I had recognized the problem and the solution but your video gave me confidence.
Thank you. I got this exact item at home depot today and fixed my bowl leak immediately!
Easy to follow. Thanks.
Thank you. This drip and fill noise is driving me crazy!!!
Great video, I have also had the fill valve go bad as well.
Thanks! I know the fill valve can go bad, just never had it happen to me. Always been the flap.
Fixed my toilet with this video! Thank you!!
Over the top. Thanks so much for this video!
Very clear n simple explanation. Good,
Thank you so very much this helped me so much….I am definitely ordering this replacement item to fix leaky bowl.❤
Thanks for a good video, Andrew.
Turn the water knob so the water is off during installation. A lot easier. And saves water
So does holding the ballcock up. 😉
Wonderful!! So easy and it worked!!
I replaced with Korky Ultra flapper and still getting the exact leak you show in beginning of your video. Any thoughts?
I've replaced my flapper with a brand new on, but it continues to leak because the flapper edges on both the old and the new are not flopping into the right spot to seal the tank. There is always and edge that has a gap, and an edge that is massively overlapped, It's not always the same edge, how do I get the flapper to land right so that it seals all the way around?
Great video! Super helpful! On my way to Home Depot🙂
Worked like a charm. Thanks.
Thanks 👍 for the video, I can do this my self, it is a learning experience and I can do it ☺️.
Thank you so much ! ❤❤ this is going to help me fix my leaky toilet.
Thank you so much for sharing!
Many Thanks ! God Bless you !
If I could give you more likes I would because you saved my toilet from leaking I changed the number to #1 u saved me some money my water bill was ridiculously high
Thank you! Over the top!
Excellent. Thank you!
Thanks a lot 👍
Nice! Thanks
Thank you so much
Installed new flapper. Still leaking. Very slight.
Any suggestions ?
Thank you this helped so much
Mine is leaking as in the video,making a trickling sound into the toilet… is it possible it’s the ball float that’s not shutting off the water off enough, or not getting Hugh enough, so it trickle overflows and goes into the overflow tube which would then trickle into the toilet? How would ok e adjust this?
I had all the guts replaced 6 months ago and now there is a slight dripping noise inside the tank. Plumber told me to try to loosen the chain but does that sound right?
What about the lube that it comes with? I didn’t see you apply that to the black seal that came with the Korky kit.
Did that, still leaking, I think it's a seal below that. You know how to change that?
I got a new korky flapper and new fluidmaster flapper. Still leaks. I also had a new korky flush valve. Still leaks
Same
Same !
Same here
Umm is it spouse to be leaking like five times at once
Thank you
Thanks
Yeh setting number one for me too 😂
did everything, checked everything (seal, cleaned the seal, adjusted chain, et.)still there is water leaking into the bowl on the left side. Help! Thanks!
What did you end up doing?
Thanks going to get a new flapper
Any ideas what could be wrong even with a new flapper? I did the dye test in the tank and it's still coming into the bowl. Not sure if the fluidmaster ones are just crap or what 😞
Did you end up getting another new flapper? I think fluidmaster may just be crap. Purchased new kits to have on hand a year or two ago. Just installed two as regular maintenance and both leak tank to bowl.
@@StupidRalph No, turns out the flapper wasn't actually the problem (and yes, the fluidmaster is fine). Whoever installed the toilet and parts took that hose and anchored it too far down into that white cylinder. For whatever reason, that was causing a slow drip to run around the clock because of a siphoning issue... can't really explain how the siphoning took place but simply pulling the hose back towards the top of the cylinder thing fixed the entire issue.
@@scottwhitener9702 Thanks Scott. I'll check mine out in the morning.
I have this problem. I have tried 3 different flappers and they all leak.???
I changed out my flapper but it's still leaking a little tiny bit of water into the bowl. Not nearly as much as it was before. But still leaking. Anything else I should be checking?
I have the same problem
Thank you, did what the video showed, but still a drip, now what? Please help driving me crazy
I installed a new flopper with a new fill falve from fluidmaster but its still leaking.i cant figure it out
That's what I was thinking is well but I also was thinking where the flat that gasket at the flat sheets into I think that it bad
So the funny thing about this is that I have two toilets doing this but the fill valve isn't turning on to refill the bowl. I've never seen that.
I have a slow drip but it isn't in the toilet, driving me nuts
Not the flapper for me. I noticed the leak because the water leaking in is starting to stain the bowl.
Tried every flapper on the market. Still leaks.
I got a new korky flapper and new fluidmaster flapper. Still leaks. I also had a new korky flush valve. Still leaks
@@plejaran7 Same here. Mine is leaking because of how the flapper lands, it doesn't line up to seal all the way round, it leaves a gap on the edge to the left, front, or right.
over the top is the only way !
It's supposed to be flexible
I can see now how people get ripped off so easily, really some ignorant people in the world going by the comments. Wow
over the top. A waterfall flows over the top
it is called a 'flapper' and the package and all the printed material says that . But he calls it a 'flap' ... Skip it.
Easy to install, th-cam.com/users/postUgkxjA-hDN2m8_mi0Dg0JD8U6QiArozIAc4I and comfortable. No idea what other people were talking about when they said it was difficult to install or uncomfortable.
want to do a 6km marathon with me?
thank you
Thank you