You're welcome! Thanks for taking the time to comment. I am always trying to be clear in my videos, so I'm glad to hear. Please do like this video and subscribe as it really helps me.
I have cracks in the 'plastic housing' which you described. Do you have a link to replace one of those and/or is there a video explaining how to replace this. Thanks
Thank you, excellent video instructions. Liked, subscribed and part ordered from the link you put up! Hope the part sorts the issue out now as I’ve the exact same flush unit as shown on the video. 👍🏼
Thank you for this. Do you also have a video to show how to remove the entire water closet from the base when the original bolts have rusted and are the source of all the leaking?
Hi. I followed your steps and took out the valve section, there were no issues there. The cistern fills to the right level. However the inside bowl still keeps running water. The flush connects to a clip on part that connects to the valve section. When I lift this up (it’s attached to the lid) the running stops. Any ideas what I need to do to fix it ? Many thanks
That part you are lifting up sounds like the water filling tap. In short, the cistern will fit up until a floating ball lifts that arm up that shuts the water off. If not, then the cistern has a safety overflow. Buy either a new float OR set to high, so overflows before shutting off. Please do like the video and subscribe as really helps us
Do you mean outside the toilet bowl or flowing inside? If inside, then it is the seal like this. If outside then most likely either a leaking hose finding its way there OR the toilet is cracked somewhere.
Then you have a situation where the seal isn't even partially sealing. It means that it is very worn or is stuck in the up position. Isolate (switch off) water coming in and follow this to replace that seal and should resolve.
Excellent thanks, the only one that shows clearly how to remove it from the toilet.
You're welcome! Thanks for taking the time to comment. I am always trying to be clear in my videos, so I'm glad to hear. Please do like this video and subscribe as it really helps me.
👍Done
Thanks. This video was helpful. I just did exactly what was shown and I got the result.
Great do you have a video to replace the plastic housing please? Thanks
Absolute legend! 100% solved my issue with minimal agro. Thank you so much!
Good stuff. If i could kindly ask, Please do like the video and subscribe as really helps us
Excellent tutorial video - the fix worked a treat and many thanks
I have cracks in the 'plastic housing' which you described. Do you have a link to replace one of those and/or is there a video explaining how to replace this. Thanks
Brilliant simple thank you covering it all
Thank you, excellent video instructions. Liked, subscribed and part ordered from the link you put up! Hope the part sorts the issue out now as I’ve the exact same flush unit as shown on the video. 👍🏼
Awesome news, and thank you for the subscription. Means a lot.
Thank you for this. Do you also have a video to show how to remove the entire water closet from the base when the original bolts have rusted and are the source of all the leaking?
Do you mean the base of the toilet bolts?
Hi, cant find the link for the spares?
hey man, really a wonderful video helped me a lot, keep-up the good work
Thanks buddy, so good to hear. Please do like the video and subscribe as really helps me.
Hi. I followed your steps and took out the valve section, there were no issues there. The cistern fills to the right level. However the inside bowl still keeps running water. The flush connects to a clip on part that connects to the valve section. When I lift this up (it’s attached to the lid) the running stops. Any ideas what I need to do to fix it ? Many thanks
That part you are lifting up sounds like the water filling tap. In short, the cistern will fit up until a floating ball lifts that arm up that shuts the water off. If not, then the cistern has a safety overflow. Buy either a new float OR set to high, so overflows before shutting off. Please do like the video and subscribe as really helps us
Great video, I need this right now! 🤣 Don't see links to buy new washer....?
Please could i have the link to the Replacement rubber seal
No problem.. amzn.to/4fLPCqL The one I used and fairly universal. I've also amended the description to include so thank you.
My one can’t flush down and it leaks on the side what can i do
Leaks on the side, as in outside the cistern or bowl?
Good video - where can I find the spares...or more specifically, a new flush unit like that that sort of rotates and pulls out
A replacement flush unit is here....amzn.to/3SxDaA1 This has very high ratings so should be good. Hope it helps.
Thank you for the insight
Please can you tell me why ,, there is a clear water leak coming from the front of my pedastal !!!🙃
Do you mean outside the toilet bowl or flowing inside? If inside, then it is the seal like this. If outside then most likely either a leaking hose finding its way there OR the toilet is cracked somewhere.
Great video, Thanks
What if the water flows into the WC continiously instead?
Then you have a situation where the seal isn't even partially sealing. It means that it is very worn or is stuck in the up position. Isolate (switch off) water coming in and follow this to replace that seal and should resolve.
Excellent video :)
your an absolute god send !!! u get a like from me and subscribe thanks so much its been doing my head in !!!!
Thanks dude
No problem..hope it worked for you. Please do like the video and subscribe as really helps me