That MCU is not locked, i found the pinouts on IO TERMINAL or VvDi pinouts out under the board no need to seprate thd board, used my Autel im608 and read the mcu and Eeprom saved it and cloned a new bcm
Hello, great job. I have a similar BCM. But I can't manage to separate the two PCBs. How do you remove the Press-fit pins? Otherwise, could you perform the same procedure on my BCM?
Hello i have question , i have 2019 fiat 500 abrath, bcm locked because the car was stolen, if i replace this proccesor into another bcm will it start? Or ibhave to programm keys as well? Thank u
My BCM doesn't' recognize the tailgate switch signal, and doesn't open the tailgate (switch and cabling are confirmed OK). Everything works well with the mechanic's "computer simulator". Apparently, the input hardware is damaged. I bought a used BCM, and it cannot be used for cloning, because it's locked.@@WeAreChecking
That MCU is not locked, i found the pinouts on IO TERMINAL or VvDi pinouts out under the board no need to seprate thd board, used my Autel im608 and read the mcu and Eeprom saved it and cloned a new bcm
I think I/O Terminal Fiat BSI 2 can read Delphi BSI with 70F3379 ? But great soldering skills you have !
Did you read and saved the configuration file? If so, can you please share your procedure, utilities and tools you used. Thank you.
Wow!!!! How do you manage to accurately aline the Chip all pin, on all 4 sides as you solder at the same time!!!!!! 🤪😮 In fact you have work.
Hello Brother,
My BMC is locked . Alarm set off, lost all keys. Do you recommend to fix or replace? Thank you in advance.
I am suprised they didn't fill entire thing with epoxy.
You’re right!
Hello, great job. I have a similar BCM. But I can't manage to separate the two PCBs. How do you remove the Press-fit pins? Otherwise, could you perform the same procedure on my BCM?
Yes. I can do it. I will make a video about it.
I could contact you by email, to find out if you can do the same thing on my BCM.
@@MrNomad127 yes
Good video. Question, does the BCM also contain IMMO data?
Yes
Yes
It work for Alfa Romeo Giulia BCM?
Hello i have question , i have 2019 fiat 500 abrath, bcm locked because the car was stolen, if i replace this proccesor into another bcm will it start? Or ibhave to programm keys as well? Thank u
no mcu still locked
Hi what temperature u use it
Nice work can you fix my 2011 mini cooper s countryman 4all dme
Maybe. Send me an email with details.
Did this solution work? I May have a problem which this might be the only solution. 😢
What's the issue you're running into?
My BCM doesn't' recognize the tailgate switch signal, and doesn't open the tailgate (switch and cabling are confirmed OK). Everything works well with the mechanic's "computer simulator". Apparently, the input hardware is damaged. I bought a used BCM, and it cannot be used for cloning, because it's locked.@@WeAreChecking
Salut te-am întrebat si eu in video anterior ce microscop folosești și de unde se poate cumpara, crezi ca mă poți ajuta cu informația asta?
Da, va fi in curand in magazinul online pe care urmeaza sa-l deschid.
Este un microscop pe care l-am construit si acum construiesc unele identice care vor fi la vanzare.
www.AutodiagOBD.com