Gday Craig, definitely an improvement and simple to make, the photo was taken one morning a couple of weeks ago out the front of home here, good camera on the iPhone 13, thanks for watching and commenting mate, cheers
Nice 👍 Matty I have the AL 336 D Deluxe lathe I have just retired about 12 months ago Have always been interested in machining but my dad wouldn’t let me get into the aircraft industry as he was in the industry for many years. So I was in the Truck and motor vehicle Smash Repair Industry. Now tinker around in the shed. Trying to justify buying a mill Like your channel Greg 👍
Good stuff Matty. I need to make some of those. Watching this reminded me that I've not cleaned my carriage way wipers in more years than I care to remember (at least not since my nearly 7 year old daughter was born!)
Nice one, Matty 😊. Just made some new ones myself a few weeks ago. I though they'd be more difficult too but the mill made short work of them. Thanks for the morning entertainment 👍😁👍. Cheers!
Something I have neglected in a while is check my tail stock. Time I got too it, Ah? Lebonde d17 does have TS wipers, but new felt one will be installed. NIce footing Matty, cheers. Bear.
Gday Bear, I’m surprised not all lathes have TS way wiper, thanks for watching and commenting, I received your stickers yesterday and they should be in the next video, cheers
With winter just 4 months away, I best be stock looking for cord wood here 😃 Last two years have burned 3 + cords each season, not as able to cut, so having to buy instead ☹️
Hello Matty, Nice work... that should benefit the lathe. I don't know if my Myford has tailstock wipers, something to check tomorrow when I am back in the workshop. I was using my Dremel today, I don't use it much and it was quite evident - lol. See you on the next one. Cheers. Paul,,
G'day Matt , i recently made some wiper inserts on an old lathe and did not have the correct material you have and so had to use an old leather belt cut up.( poverty pack lol ) works for now cheers.
Interesting addition Matty. Not something I've seen on many lathes, but then maybe I haven't seen many lathes ;) My CQ9325 hasn't got wipers anywhere and everything stays clean where it counts. Plenty of oil is the main thing. Cheers Rob
@@MattysWorkshop Hi Matty. None of my five lathes have ever had way wipers. I've got nothing against them, but there are two schools of thought on this. One is the negative view that the pads will become impregnated with metal or grindings over time and become abrasive, quite likely. Swapping out the pads periodically would stop this, but most seem to be there indefinitely. Whether they are actually still touching the ways or doing anything useful is the moot point. The other is that using light oil to flush the crap off of the ways is a good alternative (my approach) seeing as I don't have way wipers. If you can keep the crap off of the ways to begin with then most of the issues are eliminated. I've had the carriages off of most of my lathes and it's all been clean underneath. Interesting discussion point. Cheers Rob
Nice job, and great modification Matty 👍. Surprising how fiddly they can be, I replaced the felt on my Colchester Master 2500 with plastic scraper material, it had piped lubrication to the saddle. ( sold it 5 years ago, great lathe, but very noisy, ref straight cut gears and clutch basket). Thanks for sharing and have a great weekend all.
Gday, I honestly thought these were going to be a pain to make but I was quite wrong, the Colchester would of been a beautiful lathe own, I’d love to have one but they really hold there value, thanks for watching and commenting, Cheers
@@MattysWorkshop The Colchester lathes are very well made, mine was an early 1970s I think, it had seen a lot of hard work, everything was still working well, just the clutch as mentioned previously. Prices here in the UK 🇬🇧 are between £ 2000 to £ 4000, spare parts are mega expensive though. Replaced it with a XYZ 1630 (Taiwan built, with American control system, wired and commissioned in the UK, only drawback is its direct drive from the motor, minimum speed is 150 rpm, great machine otherwise. TTFN John
You bloody beauty 🤣🤣 Matty, that is my very first job when I get my 1997 960B running ( new motor + switch needed). 👍👍 I purchased a set for the carriage ( from Hairy Forbes)… but definitely needed on the tailstock. Thanks for the step-by-step video mate Regards, Robert
Gday Robert, the AL960b is a bloody good lathe and you’ll get years out of it, definitely worth putting way wipers on the tailstock mate, thanks for watching, cheers
@@MattysWorkshop Yep. Copy of a Harrison maybe? I bought it back in 2000 from a bloke who had hardly used it. I’ve added a lead screw cover, a taper turning attachment from an AL1000, and moved the screw cutting dial to the lhs of the carriage. Also added some extra oilers ( need to copy you and do that to the tailstock). Robert
Nice upgrade. I should probably do that to my tailstock at some point. Actually I am surprised somebody with a cnc mill does not make these as a kit and sell them on the net.
Hey matty, I had to make a set of those myself yesterday, a 22cal spent shell casing works great for punching those holes, great video, keep'um coming...
Yeah tiny brass tubing works good too, you can file the edge really sharp, then cut rubber and felt by rotating the tube in a handdrill or just by hand it works like a micro hole saw.
Glad to see your mind blowing presentation…...….it is my pleasure to stay beside you as your permanent follower……..always be creative and keep posting such fantastic stuff……..have a prosperous future ahead…….
Very good video. I keep wiping the ways before moving the tailstock as a habit but hadn't thought about adding wipers. Be a good winter project. Thanks for the inspiration!
Very good improvement and a quick easy build for any lathe. I have them on a Leblond and just removed them yesterday due to freshening up and rebuilding the lathe now. Good job Matty and CIAO for now buddy...Ricko
Gday Alan, I think it’s definitely worth doing, the tailstock feels a lot smoother on the ways now the oil is kinda trapped underneath now, thanks for watching mate, cheers
I've been wanting to add wipers to my tailstock for about a year now. I even 3D printed some back then and they are just sitting waiting for me to drill and tap the holes.
Nice job Matty. Going to put that one in the book. Great work on setting the tail stock. So you set the horizontal, was wondering if you checked the vertical to see if you need any adjustment. I have had to scrap one tail stock on a lathe to get it right and a friend had to shim another. Thanks for sharing.
Another excellent job Matty. I need to make some wipers for my old Clausing 100. Did you use a squeeze bulb to blow the chips out of the way while milling the grooves? I have 3 air compressors but do not want compressed air in my machine shop. I use vacuum to clean and brushes and magnets.
G'day Matty, I'm learning all these new skills I'm very interested thanks for the videos. In the last few days I want to look at this as a hobby, you enjoy making metal better. Cheers & Beers mate. I am a NEW BE! from Curtis ECC .
Gday, this is a really great hobby to have, there is so much to learn and so many people willing to share there knowledge to help you learn, im only self taught and if I can do it anyone can mate, appreciate you watching, cheers
Thanks Matty Nice work. you are correct your Dremel skills need help LOL... Im picking a new to me lathe tomorrow and i will inspect the tail stock and after watching you i think i can do the same hopefully i wont screw it up wish me luck...... 50/50 LOL
Gday, I’m not engraver that’s for sure, what type of lathe are you getting?, this job you can do in a day easy, thanks for watching and commenting, Cheers
MATTY hi just wanted your help and advice I’m thinking of getting a new vertex rotating table I would like the 10” your videos showing you had the 8” thanks advance PAUL 🇦🇺🍻🍻
Gday Paul, mine is 8”, this on the Cincinnati is perfect but is quite big on the mill/drill, 10” is a lot heavier to so moving it around can be an issue, you can make small things on a big table but harder to make big things on a small table, Vertex brand is the way to go mate, cheers
Nice work Matty. I need to do that to my Enco now. The factory should have did this. I always manually lubed the ways and of coarse cleaning them. Looks very nice for over 33 years of use. Do you think the holding power and or clamping force is diminished for drilling? Thanks for sharing. Take care, Ed.
Gday, I really think all lathes should have this done from the factory, this tailstock clamps has always clamp down tight and never moves, thanks for watching, cheers
Fiddly but we'll worth it. Which way did you shift the tailstock to take out the 4 thou ? Like towards the back or front of the machine ? Very neat and tidy matter, beautiful
Ah thanks for that matty, I unfortunately missed out on being able to set up a workshop like yours as DVA stuffed me around as I was med discharged from the after 15 yrs service and a trip overseas and we had to sell the house as they took over 12 months to give me a pension, so I missed out but I went to take as an adult trainee and did a few courses in the same vane as the old night school classes. I was going to get into it as a sideline but the beauracy got the better of me. We now housesit, stay with family or hideaway In our caravan nowadays. Heading back to QLD from WA next week resume some babysitting duties. So I really admire your work attitude and ethic and the simplistic but informative parting of information. I just really wish I could get back to hands on again myself but get through enjoyment watching you knock out the good stuff. Well done matty👍👌😄 Cheers Dave
This is something I should do for my P&W, great content as always Matty. Ps was a nice easy spot to go through and find all the channels I was subbed to with the no longer channel. (The comments here) Lastly holy shit man! Another 2.8k subs since the 10k vid keep it up! DJ
Gday DJ, definitely worth putting way wipers on in my opinion, the channel has grown way bigger then I thought it was going to and really appreciate you watching and commenting, Cheers
Good job Matty. Your solution is far more elegant than mine. Where did you get the felt from, please? Many thanks for sharing. Been watching for quite a while now. Cheers Greg.
Have you installed a variable frequency or DC spindle drive on any older machines? I'm thinking about installing one on my Cincinnati tool master mill and can't decide which would be best. My spindle is 1.5 Hp.
Gday, the Cincinnati was 3ph 4hp when I got it. I don’t have 3ph here so I put a single phase 3hp motor in and had no issues, I’ve never had anything to do with vfd’s yet, thanks for watching, cheers
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
I drilled & tapped the holes on my one ages ago for wipers , but that's all i had time to do ! One day ! 👍
Gday Max, I thought you’d finished your off, thanks for watching, cheers
Thanks Matty. If I can overcome my reluctance to mess with the tailstock alignment, I'll do the same.
Gday Preso, I was a bit the some but it wasn’t to bad in the end, thanks for watching mate, cheers
You show'd how easy and quick it is to do. so I'd better get off my arse and do mine. Thanks Matt.
Gday Steve, This job can be done in a day easily and no big experience, definitely worth doing mate, thanks for watching, cheers
Well done Matty, Nice little project...well done Nice steady hand with the eyecrometer machining !
Gday, this was an enjoyable project, thanks for watching and commenting mate, Cheers
Nice work Matty. Looks like they were always meant to be there. I love the photo at the end too 👌 Cheers mate. Craig
Gday Craig, definitely an improvement and simple to make, the photo was taken one morning a couple of weeks ago out the front of home here, good camera on the iPhone 13, thanks for watching and commenting mate, cheers
Nice 👍 Matty
I have the AL 336 D Deluxe lathe
I have just retired about 12 months ago
Have always been interested in machining but my dad wouldn’t let me get into the aircraft industry as he was in the industry for many years. So I was in the Truck and motor vehicle Smash Repair Industry.
Now tinker around in the shed.
Trying to justify buying a mill
Like your channel
Greg
👍
Neat job Matty. another thoroughly completed refurb.
take care
Kev uk
Gday Kev, another job off the list mate, thanks for watching, cheers
Good stuff Matty. I need to make some of those. Watching this reminded me that I've not cleaned my carriage way wipers in more years than I care to remember (at least not since my nearly 7 year old daughter was born!)
Gday Olly, definitely worth doing mate, thanks for watching, cheers
Nice one, Matty 😊. Just made some new ones myself a few weeks ago. I though they'd be more difficult too but the mill made short work of them. Thanks for the morning entertainment 👍😁👍.
Cheers!
Gday Chris, these ended up being really easy to make, thanks for watching and commenting mate, Cheers
As an apprentice we had to true up the tailstock. It took me a day.
Gday Gemma, it can get pretty fiddlie and I don’t look forward to doing it but this time it went well, thanks for watching, cheers
Great Job Matty. That’s a nice addition to your Tail Stock. It should really help keeping the Ways Clean. Thanks for Posting.👍❤️
Gday, The tailstock feels so much nicer to move along the ways now the oil is trapped in there, thanks for watching, Cheers
nice, will continue to watch, thanks to Curtis for the connection
Something I have neglected in a while is check my tail stock. Time I got too it, Ah? Lebonde d17 does have TS wipers, but new felt one will be installed. NIce footing Matty, cheers. Bear.
Gday Bear, I’m surprised not all lathes have TS way wiper, thanks for watching and commenting, I received your stickers yesterday and they should be in the next video, cheers
With winter just 4 months away, I best be stock looking for cord wood here 😃 Last two years have burned 3 + cords each season, not as able to cut, so having to buy instead ☹️
Nice video Matty. Nothing is ever easy but you always make it look easy. Always something to learn in your videos. Thank you for another video.
Gday Jim, these were a lot easier to make then I first thought, thanks for watching and commenting mate, Cheers
Nice improvement Matty! Love the machine surface you left on them.
Gday, definitely an improvement mate, thanks for watching, cheers
Hello Matty,
Nice work... that should benefit the lathe. I don't know if my Myford has tailstock wipers, something to check tomorrow when I am back in the workshop. I was using my Dremel today, I don't use it much and it was quite evident - lol. See you on the next one.
Cheers.
Paul,,
Gday Paul, im no fan of the dremel mate, thanks for watching
I modified a 17inch tale stock to fit my 15" colchester. I still need to add wipers to it.. thanks for reminding me.
Gday, definitely worth doing mate, thanks for watching, cheers
G'day Matt , i recently made some wiper inserts on an old lathe and did not have the correct material you have and so had to use an old leather belt cut up.( poverty pack lol ) works for now cheers.
Gday Graedon, leather would work good to, thanks for watching mate, cheers
Interesting addition Matty. Not something I've seen on many lathes, but then maybe I haven't seen many lathes ;) My CQ9325 hasn't got wipers anywhere and everything stays clean where it counts. Plenty of oil is the main thing. Cheers Rob
Gday Rob, I’m not shy with the way oil, I thought your lathe had way wipers on the carriage, Cheers
@@MattysWorkshop Hi Matty. None of my five lathes have ever had way wipers. I've got nothing against them, but there are two schools of thought on this.
One is the negative view that the pads will become impregnated with metal or grindings over time and become abrasive, quite likely. Swapping out the pads periodically would stop this, but most seem to be there indefinitely. Whether they are actually still touching the ways or doing anything useful is the moot point.
The other is that using light oil to flush the crap off of the ways is a good alternative (my approach) seeing as I don't have way wipers.
If you can keep the crap off of the ways to begin with then most of the issues are eliminated.
I've had the carriages off of most of my lathes and it's all been clean underneath.
Interesting discussion point.
Cheers Rob
Another excellent demonstration, of craftsman skill.
Good stuff Matty
Gday Scott, thanks for the kind words mate, appreciate you watching and commenting, cheers
Nice job, and great modification Matty 👍.
Surprising how fiddly they can be, I replaced the felt on my Colchester Master 2500 with plastic scraper material, it had piped lubrication to the saddle. ( sold it 5 years ago, great lathe, but very noisy, ref straight cut gears and clutch basket).
Thanks for sharing and have a great weekend all.
Gday, I honestly thought these were going to be a pain to make but I was quite wrong, the Colchester would of been a beautiful lathe own, I’d love to have one but they really hold there value, thanks for watching and commenting, Cheers
@@MattysWorkshop The Colchester lathes are very well made, mine was an early 1970s I think, it had seen a lot of hard work, everything was still working well, just the clutch as mentioned previously. Prices here in the UK 🇬🇧 are between £ 2000 to £ 4000, spare parts are mega expensive though.
Replaced it with a XYZ 1630 (Taiwan built, with American control system, wired and commissioned in the UK, only drawback is its direct drive from the motor, minimum speed is 150 rpm, great machine otherwise.
TTFN John
Thanks for another top video mate. Great additions to the tailstock. Have a good one 👍🇦🇺
Thanks very much Mark, really appreciate you watching and commenting, cheers
Anything that can help reduce wear is worth doing. Nice one, Matty.
Gday Russell, it’s definitely going to help, cheers
Excellent work I learn something new every video thank you
Gday Ralph, thanks for the positive feedback mate, cheers
You bloody beauty 🤣🤣
Matty, that is my very first job when I get my 1997 960B running ( new motor + switch needed). 👍👍
I purchased a set for the carriage ( from Hairy Forbes)… but definitely needed on the tailstock.
Thanks for the step-by-step video mate
Regards,
Robert
Gday Robert, the AL960b is a bloody good lathe and you’ll get years out of it, definitely worth putting way wipers on the tailstock mate, thanks for watching, cheers
@@MattysWorkshop
Yep. Copy of a Harrison maybe? I bought it back in 2000 from a bloke who had hardly used it. I’ve added a lead screw cover, a taper turning attachment from an AL1000, and moved the screw cutting dial to the lhs of the carriage. Also added some extra oilers ( need to copy you and do that to the tailstock).
Robert
Nice upgrade. I should probably do that to my tailstock at some point. Actually I am surprised somebody with a cnc mill does not make these as a kit and sell them on the net.
Gday Tom, there’s certainly a market for these, thanks for watching mate, cheers
Hey matty, I had to make a set of those myself yesterday, a 22cal spent shell casing works great for punching those holes, great video, keep'um coming...
Gday, that’s a brilliant idea using the shell, I’ll have to get a couple, thanks for watching, cheers
Yeah tiny brass tubing works good too, you can file the edge really sharp, then cut rubber and felt by rotating the tube in a handdrill or just by hand it works like a micro hole saw.
See that Max, Matty is learning from you !
Good job mate.
Gday Chris, definitely learnt a lot from watching Max, brilliant teacher that for sure, thanks for watching, cheers
Glad to see your mind blowing presentation…...….it is my pleasure to stay beside you as your permanent follower……..always be creative and keep posting such fantastic stuff……..have a prosperous future ahead…….
Gday, thanks for the kind words, appreciate you watching and commenting, cheers
Good job as always,you keep busy with all the stuff you make for the shop .
Gday, I try to keep busy but I’ve been having a few slack days lately, thanks for watching and commenting, cheers
Awesome as always Matty, g'day mate, and thanks for sharing 👍
Gday Ralfy, thanks very much mate, appreciate you watching and commenting, cheers
Very good video. I keep wiping the ways before moving the tailstock as a habit but hadn't thought about adding wipers. Be a good winter project. Thanks for the inspiration!
Gday Douglas, definitely a job worth doing and it can be done in a day, thanks for watching and commenting, Cheers
Great project Matty. They look the part too. Luckily for me the old Myford came with wipers already fitted. Not the tailstock though.
Regards.
Steve.
Gday Steve, thanks very much, appreciate you watching and commenting, cheers
It doesn't always have to look beautiful. But it must work! 😉
Greetings from Dresden! Cheers! 🇦🇺🍻🇩🇪😎
Gday, only side looked good but the other didn’t look that flash but it works, thanks for watching, cheers
Very good improvement and a quick easy build for any lathe. I have them on a Leblond and just removed them yesterday due to freshening up and rebuilding the lathe now. Good job Matty and CIAO for now buddy...Ricko
Gday, definitely an improvement and not a hard job to do, thanks for watching and commenting, Cheers
Great mod Matty and nice work on the oil grooves. Enjoyed the vid, cheers!
Gday, one side oil grooves looked good but the other is a bit ordinary 😂, thanks for watching mate, cheers
Nice work!
Thanks for sharing 🇨🇦
Thanks very much Paul, have a great weekend, cheers
Actually a very good idea. I should make some too.
Gday, definitely worth doing mate, cheers
I never even considered wipers on the tailstock Matty, great idea though 👍👍👍 Cheers, Alan.
Gday Alan, I think it’s definitely worth doing, the tailstock feels a lot smoother on the ways now the oil is kinda trapped underneath now, thanks for watching mate, cheers
Great video! Very informative and they look awesome!!
Gday Bill, thanks for watching, cheers
Great job. Thanks for sharing.
Thanks very much Gerald, cheers
I've been wanting to add wipers to my tailstock for about a year now. I even 3D printed some back then and they are just sitting waiting for me to drill and tap the holes.
Gday, definitely worth doing mate, thanks for watching, cheers
Nice job Matty. Going to put that one in the book. Great work on setting the tail stock. So you set the horizontal, was wondering if you checked the vertical to see if you need any adjustment. I have had to scrap one tail stock on a lathe to get it right and a friend had to shim another. Thanks for sharing.
Gday, definitely a good modification to do, I haven’t checked the vertical yet, that’s a one day job, thanks for watching, cheers
Great job Matty, can't think who you have been watching lol, I considered the same mod after watching him. Cheers, Jon
Gday John, this is definitely a job worth doing and not hard to make, thanks for watching, cheers
Great project Matty. Something else for me to think about doing.
Cheers Neil 👍🏻👍🏻👍🏻👍🏻
Gday Neil, definatly worth doing mate, Thanks for watching, Cheers
Great video, Matty, Thanks
Gday Rodney, thanks for watching and commenting, cheers
Nice work. Good little project
Thanks very much, appreciate you watching and commenting, cheers
I would drill a hole in the top of each of the 4 metal wiper plates, then you can out a drop of oil in the top to keep all the felts saturated. 🙂
Gday, that’s a great idea, thanks very much, cheers
upgrading a piece of equipment that just hist the spot 👍
Gday, I should have done this a long time ago, defiantly a well worth doing. Thanks for watching, Cheers
Great job Matty. Really enjoyed the video brother.
Gday Dale, thanks very much mate, appreciate you watching and commenting, cheers
Another excellent job Matty. I need to make some wipers for my old Clausing 100. Did you use a squeeze bulb to blow the chips out of the way while milling the grooves? I have 3 air compressors but do not want compressed air in my machine shop. I use vacuum to clean and brushes and magnets.
Gday Terry, I used compressed air to blow the chips away and vacuum to keen the mess off the floor, thanks for watching mate, cheers
G'day Matty, I'm learning all these new skills I'm very interested thanks for the videos. In the last few days I want to look at this as a hobby, you enjoy making metal better. Cheers & Beers mate. I am a NEW BE! from Curtis ECC .
Gday, this is a really great hobby to have, there is so much to learn and so many people willing to share there knowledge to help you learn, im only self taught and if I can do it anyone can mate, appreciate you watching, cheers
Nice project, well done
Thanks very much Jim, appreciate you watching and commenting, cheers
OK on the to do list!
Another one to the list mate, Cheers
Nice little project.
Thanks very much, cheers
Just joined the channel 👍👍
Thanks very much, appreciate you watching and commenting, cheers
Thanks Matty Nice work. you are correct your Dremel skills need help LOL... Im picking a new to me lathe tomorrow and i will inspect the tail stock and after watching you i think i can do the same hopefully i wont screw it up wish me luck...... 50/50 LOL
Gday, I’m not engraver that’s for sure, what type of lathe are you getting?, this job you can do in a day easy, thanks for watching and commenting, Cheers
Thanks mate well done!
Great job Matty. Cheers
Thanks very much, cheers
Came out very nice Matty
Thanks very much Gary appreciate you watching mate, cheers
Thanks for sharing 👍
Thanks for watching and commenting mate, cheers
MATTY hi just wanted your help and advice I’m thinking of getting a new vertex rotating table I would like the 10” your videos showing you had the 8” thanks advance PAUL 🇦🇺🍻🍻
Gday Paul, mine is 8”, this on the Cincinnati is perfect but is quite big on the mill/drill, 10” is a lot heavier to so moving it around can be an issue, you can make small things on a big table but harder to make big things on a small table, Vertex brand is the way to go mate, cheers
good job matty
Thanks very much mate, cheers
Nice improvement Matty.
Thanks very much Phil, appreciate you watching, Cheers
Nice work Matty.
I need to do that to my Enco now.
The factory should have did this.
I always manually lubed the ways and of coarse cleaning them.
Looks very nice for over 33 years of use.
Do you think the holding power and or clamping force is diminished for drilling?
Thanks for sharing.
Take care, Ed.
Gday, I really think all lathes should have this done from the factory, this tailstock clamps has always clamp down tight and never moves, thanks for watching, cheers
Nice job Matty.
Thanks very much Jack, cheers
Nice, just like bought ones.
Gday Mark, almost like a brought set mate, thanks for watching, cheers
Those may well have been a real pain in the ass but you made it look simple. Smart mod for anyone with a lathe.
Gday Joe, definitely a modification worth doing, thanks for watching, cheers
Hi Matty, nice job, I only fitted the way wipers on the front of the tailstock, bit slack I know.
Gday Willem, I went front and back to try and retain as much oil as possible, Thanks for watching and commenting, Cheers
Have you got a long neck and wiggie board out and channeling Max Grant ?? Good job
Gday, I hope one day I’ll be half as good as Max machining, there’s lots to learn by watching max, cheers
Nice upgrade
Thanks very much John, cheers
Fiddly but we'll worth it. Which way did you shift the tailstock to take out the 4 thou ? Like towards the back or front of the machine ?
Very neat and tidy matter, beautiful
Gday, the material was larger at the tailstock end so I moved the tailstock towards me, Thanks very much for watching and commenting, Cheers
Ah thanks for that matty,
I unfortunately missed out on being able to set up a workshop like yours as DVA stuffed me around as I was med discharged from the after 15 yrs service and a trip overseas and we had to sell the house as they took over 12 months to give me a pension, so I missed out but I went to take as an adult trainee and did a few courses in the same vane as the old night school classes. I was going to get into it as a sideline but the beauracy got the better of me. We now housesit, stay with family or hideaway In our caravan nowadays. Heading back to QLD from WA next week resume some babysitting duties.
So I really admire your work attitude and ethic and the simplistic but informative parting of information. I just really wish I could get back to hands on again myself but get through enjoyment watching you knock out the good stuff. Well done matty👍👌😄
Cheers
Dave
This is something I should do for my P&W, great content as always Matty.
Ps was a nice easy spot to go through and find all the channels I was subbed to with the no longer channel. (The comments here)
Lastly holy shit man! Another 2.8k subs since the 10k vid keep it up!
DJ
Gday DJ, definitely worth putting way wipers on in my opinion, the channel has grown way bigger then I thought it was going to and really appreciate you watching and commenting, Cheers
Mesin bubut type apakah yang anda gunakan ini pak?
Gday, my lathe is a Hafco Metalmaster AL960B,
Well done mate
Thanks very much Trevor, another job on you list now mate, thanks for watching, cheers
Good job Matty. Your solution is far more elegant than mine. Where did you get the felt from, please? Many thanks for sharing. Been watching for quite a while now. Cheers Greg.
Gday Greg, the felt I got is from EBay, the seller names is hytec_1, there in Melbourne, I hope this help mate, thanks for watching, cheers
@@MattysWorkshop thanks again. I'm in Canberra, so the felt won't take long. Keep up the good work. Cheers Greg.
Have you installed a variable frequency or DC spindle drive on any older machines? I'm thinking about installing one on my Cincinnati tool master mill and can't decide which would be best. My spindle is 1.5 Hp.
Gday, the Cincinnati was 3ph 4hp when I got it. I don’t have 3ph here so I put a single phase 3hp motor in and had no issues, I’ve never had anything to do with vfd’s yet, thanks for watching, cheers
fuck mate that volvo comment was a big call lol
Well you know what I mean mate, can’t beat an R-Model
@@MattysWorkshop lol yeah I know the old volvo joke
Swedish love machine , That's what one of the blokes at work called the F12 he drove !
What's the inox like compared to WD? I'd imagine your hands appreciate it...
Gday, it’s only a inox bottle with WD40 in it, it’s all the shop had at the time…
@@MattysWorkshop Thought you had come into some money!
👍 Thx for the vid.
Thanks for watching, cheers
hi Matty were are you buying you button oilers i cant find them in aus
Gday Wayne, I got these from EBay, the sellers name is “prodbuys” I hope this helps, cheers
@@MattysWorkshop thanks found him
500+? , my odds are getting slim for a oil can.
Gday Geoff, way more then I was expecting that’s for sure, may have to give a third prize away, Cheers
Looks great Matty! Enjoyed watching and learning.
Gday John, appreciate you watching and commenting mate, cheers