You have designed the bldc as usual with transparent acrylic as you do in all your projects but here particularly when working in the field of electromagnetism some basic rules must be followed i.e The stator should be made up of metal instead of any non magnetic material (acrylic in this case). As you have mentioned that you're designing a powerful bldc motor you should use a metal stator to make it powerful in order to make it meet specifications mentioned in thumbnail and description(because not every time the visual appearance do the job of meeting the efficiency of a device)
Not so fast The stator core has not to be metallic (it is preferably to be non-conductive). Mentioned metal(steel) stator will introduce max flux saturation and also increase inductance = rpm limit. Not saying about switching losses (though it can limit flus leakage)
@@dasich5338 Thats why the stator core is made up from isolated stacked and glued plates of steel specifically designed to maximise the magnetic field of the wire windings, thus limiting (due to isolation of steel plates) the max flux saturation of the core! I belive this is how it is, i may be wrong doe cause im a rookie myself!
@@lukalicina8230 You are correct and dasich is wrong, it should be made of a particular steel alloy made up from multiple different stacks glued together as you've mentioned. Additionally, the thickness should be higher enough as to avoid magnetic saturation in the metal
On electric wheel, The windings would be in the center assembly , and magnets on the outside. This can also be a upgraded to a electric wheel. With a larger drum wheel. The center assembly for this would be a strong mount.
Hi thanks for your great Chanel, sorry i have questions and if you answer that , im gonna be great full from you this motor that you have made is synchron or unsynchron ؟!
Love your content, thank you for all the work. I have a question, though. Which coils are connected to the posts? This is where I have problems; how to connect everything. There are twelve coils. Wind first one, skip two, wind. Is this pattern continued throughout? How do you know which coils to tie together? I assume that you connect the coils the way they were wound, giving three phase power. How do you know where to power it? A video to show the final connections would be extremely helpful. Again, thanks for these videos! I am learning a lot. :)
You may be try using ferrite inserts instead of PMMA pieces inside coils... that transformers on LCD display invertors may become a source to facilitate that
very extraordinary, and give us the experience of using used goods? for example, the former water pump is converted to a 24 volt BLDC or the fan engine is re-wound plus the torque? Thank You.
Very nice project I just extracted magnet's from over 30 similar hard drives. I wonder I'd I can use them in a slightly different way. I mean on the sides, because they are not square. They are like piece of circle.
You have designed the bldc as usual with transparent acrylic as you do in all your projects but here particularly when working in the field of electromagnetism some basic rules must be followed i.e The stator should be made up of metal instead of any non magnetic material (acrylic in this case). As you have mentioned that you're designing a powerful bldc motor you should use a metal stator to make it powerful in order to make it meet specifications mentioned in thumbnail and description(because not every time the visual appearance do the job of meeting the efficiency of a device)
Thanks for that added note, I expect it would increase the power a lot. (I wonder how much torque he got? I would like to have seen a measurement.)
Not so fast
The stator core has not to be metallic (it is preferably to be non-conductive). Mentioned metal(steel) stator will introduce max flux saturation and also increase inductance = rpm limit. Not saying about switching losses (though it can limit flus leakage)
@@dasich5338 Thats why the stator core is made up from isolated stacked and glued plates of steel specifically designed to maximise the magnetic field of the wire windings, thus limiting (due to isolation of steel plates) the max flux saturation of the core! I belive this is how it is, i may be wrong doe cause im a rookie myself!
@@lukalicina8230 You are correct and dasich is wrong, it should be made of a particular steel alloy made up from multiple different stacks glued together as you've mentioned. Additionally, the thickness should be higher enough as to avoid magnetic saturation in the metal
Мне кажется, он знает как делать правильно. И про токи Фуко в школе говорят.
Very professional work, Thanks my friend ♥️♥️♥️♥️♥️♥️♥️
On electric wheel, The windings would be in the center assembly , and magnets on the outside.
This can also be a upgraded to a electric wheel. With a larger drum wheel. The center assembly for this would be a strong mount.
Excellent 👏
Nice work...🙂
You're gifted
Could this be used as a drone engine.
If you make it smaller. Yes it will
It would vibrate your drone to pieces. So no.
philps :Shalom I love you chanel.
Hi thanks for your great Chanel, sorry i have questions and if you answer that
, im gonna be great full from you
this motor that you have made is synchron or unsynchron ؟!
Đẳng cấp .bạn thật giỏi
Muito bom mesmo fantástico
Can this be use for electric bike
Awesomee!!
How many volts and amp did you use?
Love your content, thank you for all the work. I have a question, though. Which coils are connected to the posts? This is where I have problems; how to connect everything. There are twelve coils. Wind first one, skip two, wind. Is this pattern continued throughout? How do you know which coils to tie together? I assume that you connect the coils the way they were wound, giving three phase power. How do you know where to power it? A video to show the final connections would be extremely helpful. Again, thanks for these videos! I am learning a lot. :)
Would this motor be more efficient by using steel inside the wound coils Sir ?? Nice work too.
Newbie question, but are there any specs to see? I don't see any? Also, plans or drawings?
Can you try making a Cealing Fan using DIY Out-Runner BLDC Motor??
Enough esc’s! CHALLENGE! Do a rim driven motor!
You may be try using ferrite inserts instead of PMMA pieces inside coils... that transformers on LCD display invertors may become a source to facilitate that
I love ur content keep doing plz
Someone tell me where to get those magnets what's their dimensions
very extraordinary, and give us the experience of using used goods? for example, the former water pump is converted to a 24 volt BLDC or the fan engine is re-wound plus the torque? Thank You.
muito top e a gente pagando caro nos motorsinho inportado
Are they for sale?
Good 😎
It is good for electric motorcycle?
Where is the common wire?
3 phase, where is the common wire connected to?
Please boss where do I buy slot magnet
Very nice project
I just extracted magnet's from over 30 similar hard drives. I wonder I'd I can use them in a slightly different way. I mean on the sides, because they are not square. They are like piece of circle.
Hello bro. i need magnetic to buy . Please tell me about magnets more info where we can to buy
AliExpress
can the brush motor work if you use 2 mm copper wire?
Sir please making jet engine for rc plane❤❤❤
bang buat saya bang buat bikin generator,saya udah ngikutin chanel abang sejak lama,bisalah kasi satu karya buat give away.
Great for vibrating concrete! Until it shatters after 5 minutes of use.
You maybe share file 3D Printer?
Super!
Nice hack
Faz um motor desse para 12 volts
Anybodys got it's torque or wattage or anything???
Bro this motor I can set on my cycle how many kmh I will ride 🙄🙄🙏pls tell me bro
12.2
High speed
👍😎🍕🐢🐢🐢🐢