Well I changed the ESC Board , I changed the Motors , all four ! I changed the GPS Module and still it says "Power System Error" everything was taken from one of my Working Mini-2 drones , I certainly wouldn't go any further with this one cause I could pickup a Used one for Cheaper ! The GPS Module , the ESC Board and Three of the Motors are no good , thus the reason for changing all of these parts but after still seeing the Error Message and knowing that all these Parts would have to be Ordered to get this one fixed , it makes no sense .
@@NiNjaTurtLe697 You may just need to check all your motors for dents, sand .etc debris.blow it out ...1st!!!!!!! they need to rotate easily or the sensor will give you error 30210...or the entire esc board will need replacing. Make sure you check each motor winding and also check for damage. I recently bent the the outer bell housing back as close as I could and it worked! Also spin the motor housing and check for wobbly uneven turns of the bell housing and attempt to carefully!!! bend it back...this can be done too! The motor may be hitting the stator magnets some. You may not need a whole new esc board....
Got a link to the new board, or even where online you found the information on how to fix? Mine decided to play in a waterfall
My drone fell into the water and it dialed the same code, the same thing, also a rotor I will change I will let you know what the result was
Dude, thanks!
It really helped!!!
I'm so excited!!
Well I changed the ESC Board , I changed the Motors , all four ! I changed the GPS Module and still it says "Power System Error" everything was taken from one of my Working Mini-2 drones , I certainly wouldn't go any further with this one cause I could pickup a Used one for Cheaper ! The GPS Module , the ESC Board and Three of the Motors are no good , thus the reason for changing all of these parts but after still seeing the Error Message and knowing that all these Parts would have to be Ordered to get this one fixed , it makes no sense .
Mine played with water too, do you have the amazon link for the ESC Board?
Спасибо Bro помогло👍
Where to buy esc board
Hey i got a new esc board and still it say error 30210 could it be the cord
I hope I don't have this problem :( . I just ordered mine. Did you figure it out?!
@@NiNjaTurtLe697 You may just need to check all your motors for dents, sand .etc debris.blow it out ...1st!!!!!!!
they need to rotate easily or the sensor will give you error 30210...or the entire esc board will need replacing.
Make sure you check each motor winding and also check for damage.
I recently bent the the outer bell housing back as close as I could and it worked!
Also spin the motor housing and check for wobbly uneven turns of the bell housing and attempt to carefully!!! bend it back...this can be done too!
The motor may be hitting the stator magnets some.
You may not need a whole new esc board....
Omg buy new esc will fix?
In most cases. Sometimes there can be a problem in the motors, you may have to blow them out or check for protruding wiring.
Yeah same