@@ulyyy27 Ignore 3 years ago me lmao, for HIDs yes use latex or nitrile gloves, bc of how hot the HID gets the oils/dirt from your hands fucks em up, LEDs are fine they dont get as hot and are made of different materials
Blue is the absolute worst color for interior vanity lights - it resets your eyes' nighttime vision adaptation back to daylight mode, but so do blue headlights so have fun driving blind.
Red is good for general night use & reading (because it does not harm your night vision so much), but not so good for paper maps. I wired, for most of the cabin lights, a polarity reverser switch in the dashboard (near the fuse box) for both white & red LEDs installed in the map & dome housings (with opposite polarities). I also put a bumper on the regular light switch so I can find it in the dark even with gloves on.
And you've never, ever, had a passenger turn a dome or map light on while you were driving? Dumber ass, looking for some trivial point to feel smart about.
Thanks for the tutorial. I currently have those same fuse-shaped lights but the LEDs they say fit my car look nothing like them. These LEDs are flat with only 1 circular end. Will those also work?
That was awesome video. I just have a question: blue LED definitely looks way cooler that white, but does it provide same clear vision? Do I still able to read map or receipt or find anything under that light?
L-E-D. what kind and size bulb was that? (new one) Thanks. PS I rigged(separated the bottom of the bulb) a 194 led bulb to put in the -dope- dome light. I would like to have a proper one in there.
I have a 2005 chevy cobalt and my dome light assembly is just hanging bc my friend pulled it out and i need to put it back in place. But not sure how to do it. Please help me out. If there is a video that would be awesome. Thank you.
Noticed you have a Lancer too. Do your LEDs have a very faint flicker when you turn them on manually while the car's running with the doors closed? My Sylvania LED bulbs flicker very faintly but it's only noticeable at night. Helps that they aren't CANBUS bulbs though
my lancer is the model right under the gts(has the lame 16 inch rims) i looked at that site and it shows two different sizes for those led lights. any chance you remember which one your car takes?
In my car it's at an angle and I didn't realize I had to rotate the bulb before pulling it out so in an attempt to just pull it straight out I shattered the bulb and cut my finger badly
Don't go over around 50,000 because Mitsubishi's aren't too reliable lol but if cared by the right owner, it'll live a long life. Only problem is the CVT but you won't have that problem with a Ralliart/MR/GSR. When you purchase the vehicle, remember this: The car will make a knocking noise that will scare you at first because of the SST transmission, so don't be too paranoid about that. Second, you will hear a popping which sounds pretty badass but it's just after-fire from the exhaust.
Time to get a soldering iron $4 www.harborfreight.com/30-watt-lightweight-soldering-iron-69060.html?cid=paid_google|||69060&gclid=CjwKCAjw57b3BRBlEiwA1Imytp88H4CfUK3TW_3fm9af3B5oaLiNWlKHonmuSPPZNnWH6_l-WU9uwhoC39wQAvD_BwE
hich11111 Google (your car model & year) interior lights. Most light bulbs have a 4 number identifier. Then go to Amazon and buy a bag of 10-20 of each. The fuse style light he just replaced is probably a 6418, i bought 10 of those for under 9 bucks. I also bought a bag of 5050's & 2825's for under 10 bucks each for 20. Those are the teeny little bulbs for corner markers and interior. So basically for 30 bucks i have a lifetime supply of interior bulbs.
your actually dumb, if it fits you can use it just got to be carefull not to scratch anything lol. some people are just scared to break shit cause they dont know what there doing
jye bojic calm down mate. no one asked to be attacked psycho. its the rule of hard and soft. soft plastic won't mark soft plastic like hard metal would. its science and fact. I'm far from dumb :)
really, i did the same thing on my car and huh no scratches. the concept hard and soft is really almost irrelevant to this and more so irrelevant to things like hitting a hammer with a hammer so just shut up and accept the fact that im right.
Title is misleading. I thought this was a video on "how to Install LED Dome & Map Lights In Your Car" on a vehicle that has none. You're just replacing the BULB, not the light.
I bought some off amazon and they appear dimly lit when turned off not sure its supposed to be like that i kight take them off so i dont risk draining my battery
OMG! Thank u so very much. I had a guy who was gonna charge me $40 to put them in.. But from watching this video I was able to do them myself. Oh and the lights are beautiful 😱 # girl power 💃💪
***** nice name sounds like a scam, 404 Not Found The requested URL was not found on this server. Sorry for the inconvenience. Please report this message and include the following information to us. Thank you very much! URL: dongguanshangxian.en.alibaba.com/%0Awww.sunshiny-led.com Server: esite172020188027.scl Date: 2015/08/17 22:26:48
A rusty, big ass screwdriver... hehehe... Should have used the claw end of a hammer. It would have been faster. ;) No but seriously, thanks for posting. Good job. :)
Haha! Yeah, I could have used a better tool but I saw the rusty screw driver and was like, whatever lol. It also would have been better to stick the screw driver in a microfiber towel or something so I don't mess up the outer edge and scuff it.
thumbs up for "ow it fell on my head"
Kyle Meeks i
Ladies suit cutting
Friendly advise, use good old latex gloves or something similar so the oils on your fingers dont get on anything
Even the LED?
@@ulyyy27 Ignore 3 years ago me lmao, for HIDs yes use latex or nitrile gloves, bc of how hot the HID gets the oils/dirt from your hands fucks em up, LEDs are fine they dont get as hot and are made of different materials
@@demonsamongstmen562 I see you corrected yourself. But yeah. Led doesn’t if it has oil on it. Doesn’t get nearly hot enough
Blue is the absolute worst color for interior vanity lights - it resets your eyes' nighttime vision adaptation back to daylight mode, but so do blue headlights so have fun driving blind.
I did the opposite LOL I did blue headlights and bright LED interior lights.
Red is good for general night use & reading (because it does not harm your night vision so much), but not so good for paper maps. I wired, for most of the cabin lights, a polarity reverser switch in the dashboard (near the fuse box) for both white & red LEDs installed in the map & dome housings (with opposite polarities). I also put a bumper on the regular light switch so I can find it in the dark even with gloves on.
z1522 u don't drive with ur interior lights on tho dumbass, common sense bro...
And you've never, ever, had a passenger turn a dome or map light on while you were driving? Dumber ass, looking for some trivial point to feel smart about.
Who drives with interior lights on 😕
Just saved my life! I have an outlander and this was just what I was looking for! I was at a total loss on how to replace these
+Zac Anderson who tf are you to judge? you obviosly did not know this either cause you watched this vid or typed it in the search bar to watch this
Glad to see I'm not the only one that chipped the plastic shit sticking the screw driver to pry it open.
Thanks for the tutorial. I currently have those same fuse-shaped lights but the LEDs they say fit my car look nothing like them. These LEDs are flat with only 1 circular end. Will those also work?
That was awesome video. I just have a question: blue LED definitely looks way cooler that white, but does it provide same clear vision? Do I still able to read map or receipt or find anything under that light?
red and blue arent bright at night.. just for swagggg. i changed all mine to white
Loop
L-E-D. what kind and size bulb was that? (new one)
Thanks.
PS I rigged(separated the bottom of the bulb) a 194 led bulb to put in the -dope- dome light. I would like to have a proper one in there.
would you recommend taking out the vehicle fuse prier to installing any of these bulbs?
Honestly, no need. You can just pop them out and put others in with no hassle.
Is this like a ‘black light’ Or is it white LED? On camera it has that blue ‘black light’ color
Is that 3175 led on outlander?
I have a 2005 chevy cobalt and my dome light assembly is just hanging bc my friend pulled it out and i need to put it back in place. But not sure how to do it. Please help me out. If there is a video that would be awesome. Thank you.
Noticed you have a Lancer too. Do your LEDs have a very faint flicker when you turn them on manually while the car's running with the doors closed? My Sylvania LED bulbs flicker very faintly but it's only noticeable at night. Helps that they aren't CANBUS bulbs though
my lancer is the model right under the gts(has the lame 16 inch rims) i looked at that site and it shows two different sizes for those led lights. any chance you remember which one your car takes?
Thanks for the video.
I tried this but now my cover cant close properly :( i dont know what happen, but its seems loose now.
i got three in the headliner......they popped right through ......i put the old one back in
Is there a way to dim map lights? 🤞🏼
this will consume less amps? possible that a dome light drains a battery overnight?
OMG, they look sick i might wanna install this on my chevy cobalt ss, thinking about it ? what do u think ?
LED :)
Can you show me avideo on replacement of LED bulbs in the 2010 Chrysler TC Limited map lights in the front done light?
Roy W Jones did you ever find it
Is there any risk of fire hazard in doing this? Just curious I know nothing about cars lol
what is the mm size bulb for your car because mines a 2014 lancer
were u got the light bulbs?
Hey just wondering if they dim I have a tundra just wondering
does it dim like my original light. . I have a lexus it dims when you close the door. .. it being led just wondering if they also dim?
gud work man .thnx !! any video how to make led strip connections to domelight ?I wanted put led under car
What is the size of this bulb you used?
These lights look so cool, Great vid and LED's rock
I can get the covers off , but cannot yank the old bulbs out, so frustrating ...any tool I’m not thinking of?
LED like the idea and very good walk thru. Thanks!
Is the rear view mirror lights same light and install?
Thanks. Let's to know to remove the whole assembly too
what is this color ? or hyper white
Nice vid engage!
How many Millennials does it take to change a lightbulb?
First, you have to show them what a lightbulb is. :/
And then we'll say how the price went up because Gen X and baby boomers fucked up our economy
SnoDawg Zero, they pay mechanics to do it for them
What kind of car do u have. I have an avenger
LED. Nice I’ve been wondering if I could change those. Thanks for the video
In my car it's at an angle and I didn't realize I had to rotate the bulb before pulling it out so in an attempt to just pull it straight out I shattered the bulb and cut my finger badly
LED
Thanks for the tutorial. You did a great job.
Dope! What year Lancer this is perfect because I have one.
Don't go over around 50,000 because Mitsubishi's aren't too reliable lol but if cared by the right owner, it'll live a long life. Only problem is the CVT but you won't have that problem with a Ralliart/MR/GSR. When you purchase the vehicle, remember this: The car will make a knocking noise that will scare you at first because of the SST transmission, so don't be too paranoid about that. Second, you will hear a popping which sounds pretty badass but it's just after-fire from the exhaust.
My car has the led light soddered to the inside :(
Time to get a soldering iron $4 www.harborfreight.com/30-watt-lightweight-soldering-iron-69060.html?cid=paid_google|||69060&gclid=CjwKCAjw57b3BRBlEiwA1Imytp88H4CfUK3TW_3fm9af3B5oaLiNWlKHonmuSPPZNnWH6_l-WU9uwhoC39wQAvD_BwE
Good looking out. 😉
Thank you for the video...I will change upgrade LED lights tomorrow
You’re welcome man :) enjoy your new LEDs
Thanks good. I was watching a vid ahead got scared if i pull the bulb out it my shock me.
I couldnt turn the light off so thank you i needed that
how do I know which bulbs to get?
Yooo thanks 🙏 so much bro 😎 I appreciate ❤
simple and easy video, good job explaining!
I tryed putting a 501 led into my map reading lights and it blue a fuse why would his happen
Nice. They're usually around 22k so don't buy one over the MSRP. They go for $28,000 ish brand new.
I love how all mitsubishi's have the same or similar wiring. makes it easy for me to just grab the same things that you used
LED, I'm looking into changing out mine.
"Ow! It fell on my head!" Lol
Where do I find the blue lights?
*WHERE'S THE LINK FOR THE LED BULBS?🤷♂️*
I always heard that they will blink while the car is not on. Is this true?
Thanks ET! You did a great job. Very helpful.
led nice vid man
Very good video. Thank you. Also finally answered my question as to the difference between map and dome lights 😂
Just a tío my guys put tape around the screwdriver and then pop it out
Ellie De. Thanks for the help!
So you just take the middle off and put the leds in the middle or wtf?
Bulb type and length please
hich11111
Google (your car model & year) interior lights.
Most light bulbs have a 4 number identifier.
Then go to Amazon and buy a bag of 10-20 of each.
The fuse style light he just replaced is probably a 6418, i bought 10 of those for under 9 bucks.
I also bought a bag of 5050's & 2825's for under 10 bucks each for 20. Those are the teeny little bulbs for corner markers and interior.
So basically for 30 bucks i have a lifetime supply of interior bulbs.
LED - left a like and comment
You are a tutorial master you explain everything so well Thanks a lot bro!$
you dont take a screw driver or anything that is flat.. you use plastic removal tools!
your actually dumb, if it fits you can use it just got to be carefull not to scratch anything lol. some people are just scared to break shit cause they dont know what there doing
jye bojic calm down mate. no one asked to be attacked psycho. its the rule of hard and soft. soft plastic won't mark soft plastic like hard metal would. its science and fact. I'm far from dumb :)
really, i did the same thing on my car and huh no scratches. the concept hard and soft is really almost irrelevant to this and more so irrelevant to things like hitting a hammer with a hammer so just shut up and accept the fact that im right.
jye bojic lol
hahaha just did it today with 2 blue leds in the front 2 and a white led for the dome and its really nice
LED
Thanks for this info. I'm gonna give this a shot
Nice but for overhead lights I would just use a white LED
stizz1982 o
Title is misleading. I thought this was a video on "how to Install LED Dome & Map Lights In Your Car" on a vehicle that has none. You're just replacing the BULB, not the light.
LED thanks for the tutorial!
Year, make, model???
Led. Nice work
Very helpful. Thanks.
why don't they work for my car I have a 1992 Buick regal
Who"s your Daddy!🤣
LED lights cost how much? I watched!
Great advice
LED LED LED LED
LED! Thanks man
I bought some off amazon and they appear dimly lit when turned off not sure its supposed to be like that i kight take them off so i dont risk draining my battery
same here, I have them in my impala and they only dim and at times start flashing. looks kind of cool to be honest. haha
Great video
OMG! Thank u so very much. I had a guy who was gonna charge me $40 to put them in.. But from watching this video I was able to do them myself. Oh and the lights are beautiful 😱 # girl power 💃💪
video starts at 0:55
Does it work on a Dodge Ram 1500 2019 classic express
Make more car tuts :D
led. awesome vid
Very good video
Thank you for this
LED/ great vid
I thought you don't do tutorials?
do you notice that they are dimly lit even while the LED is off?
*****
nice name sounds like a scam,
404 Not Found
The requested URL was not found on this server. Sorry for the inconvenience.
Please report this message and include the following information to us.
Thank you very much!
URL: dongguanshangxian.en.alibaba.com/%0Awww.sunshiny-led.com Server: esite172020188027.scl Date: 2015/08/17 22:26:48
+dsouzand He is called Job Steve because he gives jobs to people.
A rusty, big ass screwdriver... hehehe... Should have used the claw end of a hammer. It would have been faster. ;)
No but seriously, thanks for posting. Good job. :)
Haha! Yeah, I could have used a better tool but I saw the rusty screw driver and was like, whatever lol. It also would have been better to stick the screw driver in a microfiber towel or something so I don't mess up the outer edge and scuff it.
Rusty but trusty!
Question
Sup
great vid but if the camera could be a little more steady, kind of make me dizzy with the fast movements
How to install a head unit and stereo is your next video rite ;)
Thanks
Waw so easy thank you.
Ima install a led light in my car
yeah i have a 2009 lancer i'm gonna be doing some cusomizations on. cool vid.