Toyota Rav4 LED Interior - How To Install - 3rd Gen (2005 - 2013)
ฝัง
- เผยแพร่เมื่อ 22 ก.ค. 2024
- Watch the product used in the video by @PrecisionLED
Standard: goo.gl/Q2GdPt
Premium: goo.gl/25vzTM
Compatible with all 3th Generation Toyota Rav4
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013.
The LEDs and tools used in this tutorial can be purchased at www.PrecisionLED.com
Direct Product Link:
Standard: goo.gl/Q2GdPt
Premium: goo.gl/25vzTM
For purchasing and production information on this Precision LED kit or other vehicles contact:
www.precisionled.com/contact.html
Did this video help? Please support us by subscribing to our TH-cam Channel. It's nice to know our customers and friends care!
00:00 - Introduction
01:07 - Front Map LED Installation
02:33 - Vanity Mirror LED Installation
04:04 - Rear Dome LED Installation
06:18 - Trunk LED Installation
08:00 - License Plate LED Installation
09:15 - Reverse Light LED Installation
10:37 - Outro
⇢ Subscribe: / precisionled
⇢ Instagram: / precisionled
⇢ Facebook: / precisionled
⇢ Twitter: / precisionled
Thank you,
-PrecisionLED
#carledlights #ledlightsforcar #precisionledlights #precisionled #precision #ledlight #ledlights #toyotatacoma #toyotarav #toyotarav4 #toyotarav4prime #toyotarav4hybrid #toyotarav4ledlights - ยานยนต์และพาหนะ
One of the best overall TH-cam video; slow talking, every single step explained in fine details: from how to remove each cover to replace the bulbs to replace the covers. Very very well done guys. Cheers
Really helpful I just finished right now with you’re video my 2009 RAV4 Limited incredible👌👌
Incredible tutorial! So perfectly articulated steps!!! I’m buy this kit your using!!!
Thanks for the video! I can now confidently replace the bulb in my 2007 Rav4.
I did it! Got the lights and went to it. Also, this is the best vid demo. Did my headlights and "fog" lights as one was broken. Did not do a full install, so no independent "fog" lights switch.
Glad to hear! Thanks for watching 👍
Great video. Very detailed. Well spoken. Thanks for the instructions.
Excellent video definitely helped to NOT mess up a lens or wiring poking and hoping around
Ok- I just purchased this using the premium link! Wish me luck! (Ps, too bad the pop up promo came AFTER checkout).
Wow this was a great video with very detailed instructions! Good job guys!
Thank you for the kind words!
Don't skip the step about removing at the two anchor points. I already had removed mine before watching and thankfully I could bend them back! thank you!
Thanks for the input and for watching!
for those who are replacing their vanity mirror lights, the right side comes out the same as the left( do not pry from the right side of the right light)
Excellent presentation and very helpful for interior light replacement in 2007 Rav4.
R. Kott
Thank you for the positive feedback!
You're a God-send. Thank you for such good instruction.
Thank you for your kind words!!
GREAT instructional. Thanks
Thanks for the video.... I am going to do for my rav4 2006
Perfect for my 2008 RAV4 , thanks
Glad to help!
Thank you sir! Super helpful video
Amazing video. Amazing!!
Very helpful every step of the way. 👍
Very helpful details.
Great video. I will be ordering a set for my wife's car. Thanks
Thank you for watching!
God Bless you good work Jamaica
Such a great demo video.
Great video
Excellent tutorial and products. Thank you
Thank you for tuning in!
Excellent work
Me ayudó bastante para la RAV4 2012 de mi esposa, muchas gracias por el video
Glad we could help, thanks for tuning in!
Super helpful, I can't wait to install this
Glad to help! 👍
Good, clear, precise video. Thanks fellers.
Thank you for watching!
Thanks for sharing. Happy new year. Regards from Panama
It is our pleasure, thank you for tuning in!
Very very helpful. Thank you!
Thanks for tuning in!
WORD OF ADVICE: Do yourself a favor and before installing the dome light, spread out a blanket across the rear seats. I butterfingered that bulb more than a few times, and one of those times it dropped in between the seats and down into the runners. I then spent a good 10+ minutes disassembling the rear seat to find the bulb. Very frustrating for an otherwise super smooth installation.
Excelente video muchas gracias, Rav4 2010 por acá! saludos!
Thank you for watching and supporting!
another great how to vid! 👍👍
Thank you for the kind words!
Thanks. Nice vid.
Excellent presentation, the only problem I had was the reversing light. Some how the globe came lose and fell into the taillight assembly. Ended up having to take the taillight assembly off to get the globe out otherwise all good.
Glad to hear it worked out!
Very informative video but what about those lights up the feet of the driver and the passenger?
Thanks so much . Today I just change it . 😀
Glad to hear! Thanks for watching!
muchas gracias!!! awesome video!!!
Thanks for watching!
Nice video. What model or size LEDs should be on each light?
Question. While trying to get the map lights out, I twisted and the whole assembly went up into the headliner. Any suggestions on how to get them out??
How about the reverse light on the passenger side where the bracket for the jack prevents you from getting in there ....please help
Excellent
i will be doing this on my Rav 4 soon.
Let us know if we can help in any way!
What about the small bulbs point at leg and cup holder?
Buenicimo video y lo guardé para hacer los cambios mañana mismo
Thank you! We hope the install went smoothly!
OUTSTANDING, Thank you
Alena Stifel I agree! Only thing is, you mentioned the info on the bulbs only on the map lights. What #’s is it for the rest?
Thank you for the kind words!
For specific bulb sizes please contact us at help@precisionled.com!
How do I replace interior lights to LA D lights in my 1999 rav 4 I cannot find any videos. On this there aren't many lights to install
Is the trunk LED different size than the rear dome? It looks a lot smaller.
this was helpful. I also liked that you showed which panel tools to use. I have a whole set and never really knew how to make use of them. everyother video shows it using a screw driver but it's much easier amd safer (for me and the car) when using the right panel tools.
Thank you for the positive feedback!
were the rear dome and trunk led's the same leds?
What is the rear passenger light wedge model type?
I'm confused, are the LED lights included with the kit?
Vital! When removing lamps from Map Lights be careful not to twist the bulbs as this will release the socket and it will fall into the fixture necessitating a removal of the fixture to retrieve the sockets. Sockets look like little discs. Heads up!
Thanks for the tip!
Ack this happened to me!! How do you remove the fixture?
th-cam.com/video/QLUPlJLcmSs/w-d-xo.html@@paulasanjines2340
Is there a trick to get the bulb out? It wont come loose.
does this work on gen 2s?
Чувак ты лучший
спасиба!
What is the bulb name/number for each bulb inside the car?
Where can I get these inside lights?
nice!
Thanks for watching!
I wanna do it to my 07 Tundra! Hope it won't drain the power of the battery? Any suggestions
Thank you for your interest. No, as long as your vehicle's battery is performing efficient, you will have no problem with our LEDs, as we sell very high quality, Canbus products, which require very little power from your vehicle's battery.
Good video but in my 2009 Toyota RAV4 the wiring was reversed on the vanity lights with wiring coming in from the window side.
I should have pried it out from the inside edge and not the window edge. Good think I didn't damage anything in the process....
Thanks for the input!
Mersi
Thank you for tuning in!
Hi, thanks for your video. My RAV 4 is 2010 with run-flat tires. My plate is at the center of back door and now one of the plate light is broken. Do you know how to replace it? Thanks,
there is a screw holding it in place. Use a Philip's screwdriver to remove the screw and the light housing will drop down. Twist the housing a quarter turn and it will unlock the bulb form the housing. Pull out the bulb and replace it with the LED.
👍
So I have two rav4s in the family. A 06 and a 13 . When going to your website link through the video, it says that it's only 06-12.
I apologize for the confusion. For the 2013+ you would install this kit: www.precisionled.com/toyota-rav4-premium-led-interior-package-2013-present.html
Another tip, I when you’re doing the bulbs on the centre console, don’t remove the black bits that hold the bulb in place! They rotate and can drop away. If you do, here’s the video on how to remove the whole console to find them again 😄 th-cam.com/video/QLUPlJLcmSs/w-d-xo.html&si=TTTl2asHEJUZhpvR
muy bueno aún que no entendia lo que decía pero las imágenes son suficientes.... Perú
Glad to hear it was still helpful!
can this be done to my 04 rav ?. Hope it can
Yes, the installation process is virtually identical to as show in the video. However, you would purchase this kit (www.precisionled.com/toyota-rav4-premium-led-interior-lights-kits-2001-2005.html) as opposed to the kit linked in the description.
Can you guys make one like this for a 2014 Toyota Avalon pls? Lol
How about foot well?? Has anybody changed those lights also?
Thank you for your interest. I do believe that your footwell lights would be stock LED, which you cannot replace, as they are soldiered to a chip and board. However, if this is not the case, if you can send us over a photo of your physical bulb, we can recommend a compatible replacement, as well as some possible installation tips. You can email help@precisionled.com.
Your video says 2005-2012 but when I went to purchase it,it only says from 2006-2012 and I have a 2005 though
As long as it's a third-generation RAV4, I'm sure it will work.
Sorry about that, here is the correct kit for your 2005: www.precisionled.com/toyota-rav4-premium-led-interior-package-2001-2005.html
Whats difference between premium and standart version ?
Checkout this video for key differences: th-cam.com/video/eES-rxFew00/w-d-xo.html&ab_channel=PrecisionLED
I need to replace one front map light and one vanity light in my 2007 RAV4. Can you please tell me the part number of the bulb to buy? Also, I understand there are several options: incandescent, LED, and halogen. Can you recommend which one I would want? Thank you.
The vanity lights and map lights would both use a T10 bulb, which you can find here:
www.precisionled.com/premium-t10-canbus-6smd-5730-led.html
We sell LEDs in two different color options, 6000k crystal white and 8000k cool white. If you have halogen bulbs currently installed in your RAV4 I would suggest replacing both bulbs so that they will be the same color and brightness.
@@PrecisionLED thank you. I was told the map light is a DE3175 and the vanity light is 2825. Is that wrong?
@@vlewin1844 2825 = T10. The map light would use the same size bulb as the vanity light, but if you are talking about the dome light, that would use a festoon type such as the DE3175, which you can find here:
www.precisionled.com/premium-festoon-29mm-canbus-3smd-5730-led.html
@@PrecisionLED thank you very much for clarifying.
what is the size of the trunklight and the dome light?
Hi! For the trunk light we installed a 31mm festoon and the dome light uses a 29mm festoon.
On my 2008 RAV4 thhe bulbs in the map light fixture are held in place with a small plastic ring clip that falls off, and inside the fixture assembly, and is impossible to retrieve. No illustration of what to do once this happens. Can I pull out the whole assembly, retrieve the clips and re-install with the new LED bulbs in place or am I screwed?
there is a video on how to remove the asssembly and repair - search for rav4 map light removal
@@lparch Did that and resolved the problem but Precision's very helpful video showing how to replace all the bulbs in my RAV did not mention the little ring clips and the necessity to avoid twisting the bulb on removal. I eventually found confirmation that I could remove the fixture, retrieve the clips and finish the job.
I did the same thing in the wife Rav. Freaked out. Looked at videos to see you have to yank the whole assembly out with a bit of force and then fix the lamp holder after that.
Thanks for the input, we will keep this in mind for future videos!
You guys need one for the fog lights!
Thank you for the suggestion. We will keep an eye out for another Rav4 out here in Los Angeles to shoot the fog lights installation. Subscribe for updates!
Fog lights are a bit complicated. I've been changing them since 2007 though. The first time took me 45 minutes per light.
You need to turn the wheel so it's not obstructing the panel for the wheelwell then take off the pins pinning the plastic wheel well together. Then while holding that plastic panel aside, put your bulbs or "light-kit" in.
Takes a little practice, but once you get the hang of it, it could take less than 10 minutes to replace a bulb when needed.
What kind tool u are using, can i have a name, and where i can buy it
We are using our trim took set, which you can find here: www.precisionled.com/professional-trim-tool-set-3.html
Alguien sabe si se pueden conseguir estos leds por mercadolibre para una rav4 2008
Estás luces Led se consigue en todo lado y eso si trate de comprar de calidad
Link is in the description box below the video! It is compatible with your 2008 RAV4!
I have a toyota rav 4. 2012... in other words. .this model. And now I have a issue with the window. The window (glass) up, but doesn't down. The technician made me buy a new master control of the windows, but the window never came down.😑 so, I bought that part... and that was not the solution. Somebody here has any idea or any video that I can watch and have an idea in what to do forward? Thx all.
Unfortunately this is not an area of expertise for us, but hopefully one of our viewers will be able to help you out! Good luck!
@@PrecisionLED thank you so much!
Did you install a 6000K or a 8000K? what is better?
In this video, the 8000K color temperature is installed.
Bulb color temperature is personal preference. The 6000K is very slightly brighter.
Thank you for your reply. I will order mine too. By the way have you changed the Head Lamp yet?
Not for this specific year. However, for the previous generation, which you can see via the video below. The installation process would be identical, but you would install this kit instead:
www.precisionled.com/premium-9005-cree-led-headlights.html
Video:
th-cam.com/video/5LTm7_LDpfk/w-d-xo.html
so i was installing the dome light when all interior lights when out, now they wont work even with the originals,
can you help me please???
Check the fuses for the interior lights
Sounds like you need to replace the fuse.
You missed an interior light!
The 3rd generation starts in 2006, not 2005.
Thank you, we have updated our kits on the website to reflect this!
You don't need a special tool to pop the fucking cover off unless you do it professionally. Just use a knife, it won't scratch or damage it if you're careful.
Very helpful. Thank you!
Thank you for the support!
Very helpful. Thank you!
Thanks for your support! :)