DJI Mini 4 Pro: How to Calibrate Gimbal, IMU, and Compass
ฝัง
- เผยแพร่เมื่อ 10 ม.ค. 2024
- This is a step-by-step tutorial showing you how to calibrate your Mini 4 Pro's Gimbal, IMU, and Compass.
Chapters:
0:01 Intro
0:15 Gimbal Calibration Info
1:20 Calibrate Gimbal
2:38 IMU Calibration Info
3:57 Calibrate IMU
5:08 Compass Calibration Info
6:20 Calibrate Compass
Visit us at:
Droneblog.com www.droneblog.com/
Drone Courses on DroneSchool.com droneschool.com/
If you have any specific questions for us at Droneblog, feel free to join us at Drone Pilots Community dronepilots.com/ - วิทยาศาสตร์และเทคโนโลยี
Video did not show calibration movements.
my drone in service... thanks for new posting
Thank you four your video 😮
Problems with the IMU calibration.
1. Lay drone on flat surface... great, this works fine, we move on to position two
2. Lay it on its side. PROBLEM! It doesn't, The arms are all fully retracted, the propellers are all inboard... but it's like a table with a leg missing.
Anyone?
Nothing on video on how to tell if the compass calibration was complete, had to go to another video. If you don't get a message that it passed you didn't get it calibrated. If you get a failed message it need to be repeated.
Exactly. No insight on what to do if the calibration keeps failing. What video did you watch that helped?
Hi how do you solve the vision sensors error
I crashed my mini 4 pro, it was with rc2 and after crash the view was visible but after few minutes the drone got disconnected, and now after repairing the physical damages the drone is still not getting into pairing mode or it is not getting connected to the remote
what about the rc controller calibration?
I noticed since I added blade guards and I command the drone to move backwards it will move back and to the left just a bit. I’m wondering if the weight if the blade guards is demanding recalibrating of the IMU and advice would be appreciated.
Why do you need blade guards on such a small drone? Hope not to make the FAA happy.
@@benyosep5640 to protect the propeller from tree branches.
If you have any specific questions for us at Droneblog, please ask us in our community at DronePilots.com/