Hyundai and kia most common problem that the dealership don't know how to fix

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 พ.ย. 2021
  • Here is how to fix the problem • replacing the intake r...
    the name of the part is vcm motor and here is where to buy them Links to them
    ebay vcm motor parts ebay.us/G9WIcy
    Amazon Vcm motor amzn.to/3o4WXLS
  • ยานยนต์และพาหนะ

ความคิดเห็น • 36

  • @DULLAHGOSOHARD
    @DULLAHGOSOHARD  ปีที่แล้ว +1

    the name of the part is vcm motor and here is where to buy them Links to them
    ebay vcm motor parts ebay.us/G9WIcy
    Amazon Vcm motor amzn.to/3o4WXLS

    • @yellliza
      @yellliza 5 หลายเดือนก่อน

      Mine vcm was fixed but now the engine is making sounds, and the dealership wants to switch the whole engine. Is that right?

  • @TheElantra
    @TheElantra หลายเดือนก่อน +2

    For anyone that wants to know. there are 2 vcm motors on the intake.
    One in the front right side and one in the back right side. These motors control "flaps" inside the intake the regualte according to airflow and throttle position. It helps create torque especially at low rpms.
    Sometimes, like on my issue, the motor works at low voltage (AA battery) but 12volts the part that spins on the side of the vcm, will twitch and move a little. but if i keep tryna give it power, it wont budge unless i reverse the positve and negative wires to get the "key" to spin in the other direction.
    I opened up the vcm to see if there was a lose wire or burnt motherboard, turns out, there was dry acid or whatever from the motor. So moisture or whatever go in and fried the motor. which is why i could power on low volts and not high volts.
    Anyways, the symtpoms youll have is
    Hard starts
    Rough idle
    engine shakes
    Misfires (especially if car is in park/nuetral and you quickly try revving the engine, it will misfire and sometimes stall)
    poor acceleration
    No starts
    hesitation
    It may throw a lean code P0171 or another code P016c.
    P016c is not directly related to a vcm motor. More so, if a specific engine component is not performing correctly according to manafacturer limits.
    A Bad vcm throws off incorrect Air/fuel data to ecu (computer)
    So the computer tries to compensate by adding more fuel. But since the air inside of the intake is not restricted or "flowing" properly, it creates a lean condition. in other words, too much air.
    For my car, i replaced up to 2k in car parts. I had a mechanic diagnose, he couldlnt figure it out.
    I only figured this issue out after testing the power to both vcms and the one worked just fine powering off the battery leads. The other barely would move.

  • @TayNayofficial
    @TayNayofficial 2 ปีที่แล้ว +11

    How does this video not have a lot of views, this information is EVERYTHING 🙏🏽🙌🏽 great video g

    • @kgb8894
      @kgb8894 4 หลายเดือนก่อน

      I was thinking the exact same thing

  • @jobob7230
    @jobob7230 ปีที่แล้ว +1

    Thank you. That was it my friend

  • @jimmyraysworld5
    @jimmyraysworld5 ปีที่แล้ว +4

    What is the part you are talking about? It would help us all to know the name of it.

  • @maxximum18
    @maxximum18 ปีที่แล้ว

    How can you tell if the part is working correctly you mentioned reving the engine?

  • @geraldwade590
    @geraldwade590 2 หลายเดือนก่อน

    Thank you Sir.

  • @jameslucas3391
    @jameslucas3391 2 ปีที่แล้ว +1

    What problems were you having before then
    Was fuel being ate
    Could you go past 40 mph

  • @harrywright2879
    @harrywright2879 6 หลายเดือนก่อน +1

    That is pretty bad when the dealer doesn't know how to fix their own car model.

  • @jobob7230
    @jobob7230 ปีที่แล้ว +5

    The car has had the knock sensor three times at the dealer. It was VCM the whole time

    • @special9555
      @special9555 11 หลายเดือนก่อน +1

      What you wind up doing?

    • @yellliza
      @yellliza 5 หลายเดือนก่อน

      Mine vcm was fixed but now the engine is making sounds, and the dealership wants to switch the whole engine. Is that right?

  • @painfull2027
    @painfull2027 2 ปีที่แล้ว +10

    You keep saying “this” is what’s wrong but you never say what the part is called???

    • @famholland469
      @famholland469 ปีที่แล้ว

      Behind the black plastic intake manifold he touches when he opens hood the knock or detonator sensor

    • @jobob7230
      @jobob7230 ปีที่แล้ว

      VCM motor

  • @wallylatorre8349
    @wallylatorre8349 ปีที่แล้ว

    THIS IS A GOOD VIDEO

  • @christopherclark9811
    @christopherclark9811 ปีที่แล้ว +2

    I am a certified Hyundai technician and yeah I have figured this out a while ago. The tech info for daig sucks. When it comes to a lot of items. Most major diag on some parts is just replace with known good part and retest

    • @lexxjolivette2656
      @lexxjolivette2656 ปีที่แล้ว

      I’ve been to three different places and nun of them even Hyundai didn’t know what was wrong. My husband changed this part and it still makes a rattling sound when I go to accelerate. Would you know what else it could possibly be. It’s a 2017 Hyundai, Santa Fe sport

    • @fokoushipall7361
      @fokoushipall7361 6 หลายเดือนก่อน

      Any update about your car ?

    • @yellliza
      @yellliza 5 หลายเดือนก่อน

      Mine vcm was fixed but now the engine is making sounds, and the dealership wants to switch the whole engine. Is that right?

  • @felipe3171
    @felipe3171 8 หลายเดือนก่อน

    Hi there
    Where do I buy that part

  • @migueljaden23
    @migueljaden23 7 หลายเดือนก่อน

    Would these make p1326 code come on

  • @scott4172
    @scott4172 2 ปีที่แล้ว +1

    Looks like the coolant is empty.

  • @jameslucas3391
    @jameslucas3391 2 ปีที่แล้ว +4

    I have a minor knock when first starts
    Can’t accelerate past 40 mph
    Car drives engine light started blinking yesterday only drove home nowhere else since
    Gas goes a lot faster
    Shop open tomorrow
    What do you think is wrong 2016 Kia Sorento P1326 Glow relay it say

    • @Goldun-nah
      @Goldun-nah ปีที่แล้ว +3

      Hyundai Sonata 2015 just happened to me a few days ago. This is literally happening to everyone I feel like. Report it to NHTSA. Everyone needs to report these issues because it’s a public safety issue.

    • @osa3986
      @osa3986 ปีที่แล้ว +1

      @@Goldun-nah it happened to my sonata yesterday and mine only have 70k miles

    • @matthewburgan2319
      @matthewburgan2319 ปีที่แล้ว +2

      Just happened to mine and can’t figure it out I already replaced knock sensor and reset the codes but it still is happening after driving it for a few minutes codes come back up

    • @dominiczido1572
      @dominiczido1572 ปีที่แล้ว

      @@matthewburgan2319 any luck on a fix?

    • @dwaynenembhard7530
      @dwaynenembhard7530 ปีที่แล้ว

      Am having the same issues with my 2015 Hyundai sonata sport 2.4

  • @ShayWright-cc4ge
    @ShayWright-cc4ge ปีที่แล้ว +1

    2015 Hyundai sonata limited changed my knock sensor and now a p1326 shows a glow relay circuit. Engine like still on