Monster NOS Race Engine in a Bush Plane - Part 2 | Scrappy #40
ฝัง
- เผยแพร่เมื่อ 23 ต.ค. 2024
- Mike installs a 250 shot of nitrous oxide on his experimental bush plane named Scrappy.
Scrappy & Mike Patey Merchandise
www.mikepatey.com
Check out some of my Favorite Aviation Companies:
Best Tugs
www.besttugs.com/
Worlds Greatest Zip Tie!
www.griplockti...
Avionics Systems
www.avionikits.com
Pratt & Whitney
www.pwc.ca/en
Turbine Service
www.covingtonai...
BRS Parachute
brsaerospace.com/
Aircraft Engines
www.lycoming.com/
Carbon Cub Kits
cubcrafters.com/
Aircraft Lighting
aeroleds.com/
Garmin Aviation Products
garmin.com/Avia...
Aircraft Fabric
www.stewartsys...
Aircraft Lighting
flywat.com/
Alaska Bushwheels
www.airframesa...
King Shocks
www.kingshocks....
EarthX Batteries
earthxbatterie...
Mike, I'm an Old Fart who flew back in the 70's and 80's. Every time I watch one of your videos, you inspire me and pump me up to get off my butt and have some fun. I have a friend with a Cessna R182 Skylane. I called him up, said lets fly, so we did! Thanks for inspiring me to get back into something I love to do. God bless and stay safe.
You go, Bill. I'm 63 and my Lady is 57 and we're going to build a Bearhawk and get our fly papers.
@Pit Viper i love the 4 place, but since amphib floats will probably be involved, we will be building the Bearhawk 5.
The more I see of this engine build, the more I think Scrappy won’t need wings after all. Wow, what a beast...
Stole my thunder...lol I was thinking that same exact thing and almost posted it the same way.
Just be a rocket go straight up hanging on that prop
I think we will be surprised by the wings... there is a reason we have not seen them. Delta wings for supersonic? The gear winglets will be enough? Tube wing?
Legit scared about other component ripping off under the trust, torque and vibrations this is gonna produce
I just watched a 23 minute video that was easier to watch than some people's 3 minute videos. Your energy level is off the charts. You knowledge and excitement for what you do is second to none. I am not even an aviator and I LOVE watching your videos. Keep up the good work. NOW, GET BACK TO WORK!!!
A thumbs up to Ron, we should all have such a good friend. And I’m sure it goes both ways.
I second that. Can you imagine if we all had someone in our lives that shared their passion and skills like Mike or if we shared what already have. Way to go Mike’.
Im sure fingers go back and forth...
Every time I click intending on skipping through the key parts of the video, and every single time I watch the whole thing in disbelief at your skills and enthusiasm. Very talented man and one of my favourite channels. Cheers Mike!
Mike: “I will hardly ever use this”
Narrator: “that in fact was not a true statement”
Fact Check states this as FALSE
Lol
😂🤠😂.
@@MikePatey ✈️🤠🤠✈️
That sure sounded like a vailed "here hold my beer" statement!!
That time when one favorite creator comments on another favorite creator’s video🤪🤩
"couldn't find these online so we quickly made them", god Mike you're living how most of us only wish
He does so by design... Not chance...
There's a lot of DIY types out there but very few have the equipment and ability to make parts better than factory made like Mike does.
@@pseudocoder78 I had a similar thought. I am nowhere near his level, but I certainly have done this type of thing already
I am in awe of the cleanliness and organization of your shop. Actually I see that with most high-end aviation shops I see on TH-cam. The expense in the tools and benches and all the supporting equipment is amazing! Thanks for sharing your work and especially the passion for doing what you do. Few people on earth have that passion!
The way to simple solutions is complex understanding. You understand things at a level most could only dream of!
Thumbs up to the editor! The combined discussion overlaid with time lapse was a great way to convey the work while fitting more content into one video!
Mike, you are truly incredible. You are the unEngineer. Your ability to take technical, high level info, break it down and teach for a layman all the while making it as suspenseful as a Quentin Tarantino movie. Carl Sagan was able to break down the cosmos for us. Your doing the same with aeronautical engineering and manufacturing. BRAVO!!!!!
And Ron!!!, thank you for your continued efforts and abilities. I know these videos would not make it as frequent nor as thorough without your help. Every mad scientist needs an additional mind to keep them grounded and focused on the task at hand. You guys are great!
Mike, your ‘tired’ is me running at 150%! Honestly, your drive and motivation is incredible. I could watch what you do for hours - although I’d be exhausted in doing so!
I never want the video to end! Always a fun way to experience the build.... Thanks, Mike!
That is an insane amount of thought, time, effort, and weight for something you will probably never use. I love it!
Another Great video and lesson. I didn't realize that there was so much involved in creating a correct nitrous system. I would have never thought about the ring gap being part of the equation. Again, great video and I can't wait for the next one. Get some sleep while I get back to work.
I’ll never get tired of your work and drive. Epic every time. Thank you Mike 🙏🏼👊🏼
I agree 100%
I’m getting impatient
I want to see those wings!
He forgot
May not need them by the time he gets the cowling buttoned up!
What wings???
Wings? We don't need no stinking wings
Turns out Scrappy is a gyrocopter.
I agree, I need more of Mike, Ron & Scrappy! Can't wait to see Scrappy flying!
The discussion on timing and nitrous made me say "OOOoooh" out loud. I learned something!
Mike, You are either the most patient man alive or for you, as much as you love to fly, your ❤️and soul is in the build!! (Back to work 👍)😁
I can’t wait to see Scrappy flying. The amount of handcrafted technology on this aircraft is phenomenal.👍👍
Love the side by side view of the carbon fiber work and install work.
Im not an engineer but i could watch mike all day long what a smart and interesting guy and because of him im doing my pilots licence thanks mike
this did not feel like a 22 min video... I want more lol
I agree with what’s been said! 😁
Always
I would pay good money to clean up tools for this guy, just to learn.
These videos seem to fly by faster than anyone else’s.
So cool watching Scrappy come together step by step!
Just a bunch of old scrappy parts I had laying around the shop LoL
I can't wait to see how this machine performs.
Seriously great work Mike. You make it look easy.
Love it brother. Thanks for letting us be a small part of the family. God bless
The coolest plane ever ! So happy I’m along for the ride. Thanks Mike for sharing your projects with us !
Not an original thought, but you’re definitely the Tony Stark of aviation. Humbling to watch. Thanks for bringing us lay persons along for the ride.🤙
Yeah, if he came up with the Arc Reactor I would not be surprised in the least. That contraption he came up with for the NOS/fuel injection is in line with that
That's Burt Rutan, but Patey is getting up there. Imagine a collaboration.
@@ExtremeSquared Ummmm, okay. I’ll capitulate on that one. sir. But it certainly is hard for put Mr. Patey on the same field.
I could watch Mike all day long. His enthusiasm is contagious!
Its great to watch a professional engineer at work with innovated ideas
Unbelievable, the thought process to make something perfect! Mr. Mike, you have an such an amazing brain, talent and craftsmanship to accomplish such a tack. "I love It"
Griplock zip ties, the thing you don't think you need until you try them then you wonder how you ever got by without them. Used these on my boat last year and I'll never use cheap zip ties again, after a year of direct sunlight and exposure all the Griplock ties are pristine.
Awesome!
You have to be so excited to get this cowling designed and done, I sure am!
I am not an Aviator however I saw a post that said: "I never want this video to End!" I am in total Agreement! Those minutes seem like such a short time! Favourite Channel on TH-cam for Sure!
So am I
Mike
Great to watch you work. You are a real inspiration and I find myself spending more time in my workshop. Great explanation on the NOX system and it's dos and don'ts. Keep em coming going to be great to see Scrappy fly.
I can't wait for the first balls to the wall flight test!
Stan Chase do you know where the saying “balls to the wall” came from?
Hopefully he will be flying this at wing and wheels in September😬😬😬🤞🏻🤞🏻🤞🏻
@@liftman3334 I think his plans are oskosh.
@@alpha6ix222 I do....lol
@@Caseywhitee14 cool! Hopefully I can see it sooner I live 30-40 min from his hanger😬
This series is legitimately my favorite thing to watch on TH-cam! Incredible work Mike, always looking forward to the next Scrappy update!
This is awesome! Loved the furious references LOL I remember watching a guy blow a piston through the hood of his car at the track one day with my dad and we all were shocked, the rest of the pit was shocked. The guy had no idea what he was doing, just goes to show how unsafe it can be. Awesome to see the progress! I want to see how you do the voltage step-down//code!
Always entertaining, always learn something, always enthusiastic. Ron and Mike having a ball of a time building a Monster Cub! Back to work!
I’m sure the cowl is going to be amazing, but I’m really excited about the wings!
Wings? Where this Scrappy is going, it won't need wings... 🤣
Don't need wings in orbit, it has plenty of thrust for propulsive landing
you've seen them. look to the gear legs, that's all it needs. it's gonna be the Starfighter of bushplanes
Every time you move to a different section I think this is my favorite part and then it’s the next one then the next. This has been my favorite build series of all time.
Mike thanks for making these videos! It’s like watching a favorite movie you know it will end but you never want it to.
Back to work! 🤠
Watching Scrappy being built has been highly educational and entertaining. Thanks Mike!
OMG your OCD is massive! I love it
I can not wait to see this beast get into the air!! And the craftsmanship is beautiful!
Thanks for sharing! Love your energy and positive mentality.
I have seen so many young people think they just bolt on the kit and instant power.
With a small shot they can get away with it, but that is never enough and rings bind, head blow, and they are out of luck. Nice explanation of ring gap and its importance.
Good luck with your timing adventure, it is one of the more important items with nitrous injection.
Thanks for sharing.
Dam your doing a nice build! Your a smart man Mile and it's a real treat to watch you. Beautiful workmanship.
Love your enthusiasm and passion toward aviation. Loving every video and waiting like a proud papa...........
Jeez, the whole thing looks like a bio-reactor... so many pipes and hoses one might think you‘re gonna make some illegal booze coming out of Scrappy..LOVE IT !!!!! Go Baby Go!
It's not finished and Mike's acting like he had his head in the nitrous stream instead of his hands 💨🦲🙄🤗Do it again Ron🥶Ok we're good let's get some hot chocolate extra hot
People like you are the reason I freaking love this country “Murica”. I saw your speech at the college where you had the three people come up and did the money example. I wish more people in this world had your drive for success.
Every time I see you uploaded it makes my day!
I find it amazing that the fule nitrous atomizers are very similar to an injection plate in a rocket engine. What cool engineering went into making that piece and how many uses it has.
I love the nitrous content but can’t wait to see that wing!!!👍🇺🇸
I don't know anything about airplanes I started watching this about a year ago just looking for something on TH-cam you've got me hooked can't wait to see this thing fly
Love seeing someone go all out conceiving and building something with little to no limitations.
I was just thinking to myself minuets ago, “it’s been a wile since I’ve seen any new scrappy videos..” Back to work 🤙🏼
Also me lol
Same here
Same here! Back to work 😁
At the end of your videos when your explaining what transpired in the video I cant help but think how I saw every inch of this plane being built. So when I walk up to Scrappy at an air Show and push the button I know you know that I'm one of your students. Makes me proud.
Mike: " I didn't like anything that was already in existence so I built my own"
Literally every part of his airplane! haha
Can’t wait to see this thing rip. Plus has an amazing pilot behind the stick
@@bengman95 every part of the plane built from “scrap”. I love this guy.
Thanks again MP for the education 👍😊 And I can't wait to see the wings 😁👌
Those welds look solid, man. Good job!
Mikey, you are totally over the top, and glad you are because YOU might blow up if you hit the Nitrous at the wrong time.
Seriously, you are an amazing engineer, builder, designer, whatever, and I'm glad there are people like you in this world!
Mike, I love your videos! You got me hooked with Draco, and I’ve binged on Scrappy from the beginning in the last week! I’d love to ride in Scrappy once it’s finished!
Years ago we were trying to figure out how nitrous worked, so the cheapest motor to potentially wreck was the ride on mower.... it was INSANE for 13.5 seconds...
Now about 14 years later I understand why cranks came out the block and the neighbors were returning sparkplug bits!
Bring us more, I learn something new every video!!
I can’t wait to see Scrappy flying...well, I can wait because of the genius of MP
You are a true aviation genius, Mike Patey.
Mike laughing while standing in 200 shot of laughing gas- perfect
Mike, you have inspired me to build my own plane from plans of course. Watching you has been an educational experience. I hope one day I get to see scrappy up close at an event.
Man... Scrappy is one EPIC machine! Can't wait to see you get it into the air! 😀 Keep up the awesome work! Back to work! 😛👍
As a fellow engineer I love how you can explain complex matters in a simple way.
Phew, I'm glad you came up with a way to help overcome the horsepower deficiency in that 13 liter engine.
Didn't the original Cub have a two-cylinder engine with what displacement?
Thanks for letting me watch Aircraft History being made here....Thanks Mike & guys....!
WINGS ,MIKE! WINGS!
Watching/listening while working in my own shop :)...Now that's multi-tasking!
Ron has the greatest job in the world!
That nitrous kit is ridiculously awesome.
I'm still shocked that after I dreamed about Scrappy having NOS for performance at altitude, that you actually did it! This is too exciting to me!
Mike, the intro was awesome, great explanation of piston ring gap. Not many fully understand so the caution was wonderful.
Man I dont mean to complain, but I need another video already lol back to work jkjk.. such a awesome build you are taking us on. I'm always so stoked when I see a notification for another video. Cant wait to see this cowl you do and most def cant wait til you get started on the wings. That's a bada$$ bush plane. Love and peace
Mike, you're a crazy man. I like it! I particularly admire your ability to see the fix to a problem that has not yet arisen (but that surely will without that forethought) and make a part that solves the problem and looks good doing it! Awesome!
Outstanding Mike, you are an inspiration!
Thanks goodness you are experienced and a perfectionist! You keep adding multiple complex points of failure that would scare me and keep me up at night ....
I LOVE my Grip Lock Ties! 😁👌🏼👍🏼
As a mechanical engineer and private pilot myself, I aspire to be as competent in engineering and flying as you are. Very inspirational!
I just watched another great video, and all I can say is “I WANT TO BE LIKE MIKE!”
Much better than the other Mike
@@Heyemeyohsts / ABSOLUTELY
What an engineering marvel! I wish him every success!
Instructions unclear, piston 4 currently headed to mars
She packed my bags last night pre-flight
Zero hour 9:00 a.m.
And I'm gonna be high
As a kite by then
I miss the Earth so much I miss my wife
It's lonely out in space
On such a timeless flight
And I think it's gonna be a long, long time
'Til touchdown brings me 'round again to find
I'm not the man they think I am at home
Oh, no, no, no
I'm a rocket man
Rocket man, burning out his fuse up here alone
And I think it's gonna be a long, long time
'Til touchdown brings me 'round again to find
I'm not the man they think I am at home
Oh, no, no, no
I'm a rocket man
Rocket man, burning out his fuse up here alone
Mars ain't the kind of place to raise your kids
In fact it's cold as hell
And there's no one there to raise them
If you did
And all this science
I don't understand…
the problem is that his plane is a boxer soo its in orbit (no mars) :(
Elon Musk likes this
Pov: You’re perseverance
Percy : 👁👄👁 🔩⛓⚙️
At least NASA can pick it up for you.
You never stop impressing Mike!
Seems like a shame to cover that engine with a cowl. Be cool to have some windows in it if you have any leftover material. Supercar style to show the heart of the beast.
Or just go Cleetus McFarlane style and leave the "hood" off entirely... Aerodynamics are not needed where Scrappy is going 👍🏻🤣 now back to work 💪🏻🤠
Don't temp him, he may find a way to make it all see through. lol
Indeed!
Clear plexiglass Windows in an all carbon fiber cowling with more blue leds too please?
Just when I thought you are cresting the top on "construction mods"... the top gets moved higher! Simply fantastic!
Nice buddy!! Can't wait to see the final product and the flight testing. (Hopefully soon) your doing a great job and remember get back to work. Stay safe and have a lot of fun!!
Jesus Mike! Literally one of the smartest human beings I know. You’re an inspiration.
Just when i thought you couldn't up the game anymore you went and made that hangar a better place by injecting laughing gas into the work place.
Where......where have you been all of my time on this site. These videos are awsome and that plane looks wicked.
I wonder if Mike has ever been approached about a show with Discovery or History channel. He has the charisma and topic to have a hit show on either!!
I was just thinking about that this morning if mike just did a show on aircraft builds, he already has a waiting list on future builds it would be pretty cool
Love your videos Mike. No one else in GA is doing what your are doing for the community. Thank you. #keephammering #backtowork
What a plane, well done, love the content can’t wait to see it fly
Watching Mike at work departing knowledge on engines, parts, nitrous, voltage ⚡, carbon fibre design and manufacture etc etc etc etc, could give us some insight into what it could have been like back in the early 40 s with Oppenheimers team. The energy of smart people creating things and testing them under secrecy to create unimaginable energy. Mike you are an amazing gifted and talented person. Wow. I wonder if it really dawns on us all just what we are watching being created here. It's special. And we have it on file to refer back to again and again. 🤔✈📹✔🤓
Can’t wait to see Mikey and Scrappy hanging on the prop imitating a helicopter while Mike is holding the Nitrous switches with a big grin!
...can you say ..MOONSHOT...
@@f.dt.f3965 I had to laugh when he repeated the comment, "...I don't know if I'll ever use it." Riiiiight!! Back to that reference to the Scrappy "Helicopter take off!" ;^)
Can't wait to see it all together especially with the wing on it. Keep em coming.