I recently bought this same gun....thanks for the mcarbo tip, worked great....hornady 55 gr varmint express and 45 gr winchester jhp factory loads shot 3/4" groups....does bark a bit...
My ranch likes 25.5 of Varget with 55grn Vmax's, it also shoots well with H335 and W748. Another nice load is 23.5 of H322 with a 50grn Vmax. Those rifles shoot 1/2 MOA pretty easily once you find the right combo. My OAL is 2.240 for the Vmax loads. I bet CFE223 would get you where you want to be as well.
Suggestion..Stick with the Varget and do a ladder test. Varget is extremely flexible across various weather conditions. There's videos online on how to do it. Use the results from the ladder test to determine the right grain of powder.
Garret real like your rifle sit up. I was a Cabelas and seen this rifle for the first time, real look nice for a plinker to care around in hills or play with a range. I been reloading my own ammo for 40 + yrs. Seeing as your group open up when you went from 25 gr to 27 gr, I would try loading some rounds at 24 gr and 24.5 gr. see what that gets you. Also I would look at a heavier gr bullet with a 1.8 twist a little heavier bullet may give you a tight group. Good luck on finding that special load. I wish you lots of fun with new rifle.
Flatlander69 thank you very much! Sorry for just now getting to your comment. The gun LOVES 73gr eld match. I didn’t get a chance to film this but I’ll have to in the future. I can get 5 of them to stack right up. They just are very slow.
Usually I will run shit to get the cosmoline or whatever they use to get keep the barrel, before shooting but I will say Ruger and savage are making some of the best bolt guns on the market IMO. Remington has went so far down hill that I wont even build off of the NEW actions anymore. 9/10 I will find an old wore out remington rifle to build off of.
Hi Chuck’n you have vertical groups !! If you loosen the action screws, then press down on the Tip of the Tang, The barrel WILL ROCK UP AND DOWN 2 Inches !!!! Fix is to remove the barreled action, cut both tips off a popsicle stick, place both tips under the tip of the Tang, reinstol the barreled action and tighten down the action screws !!!! Remember, when you put the barreled action back in the stock, push the action toward the rear of the stock !! Should really help your vertical groups because barreled action can’t rock up and down !!
Hey man th 69gr SMK is the next bullet I want to try in this gun since it ran my 69gr match loads so 8063739092974795 Would you recommend the SMK for a good yote or Wolf round??
Mine is a first gen in .223 Rem. Rotary magazine and not threaded on the muzzle. I got a great deal on my first 1000 of the SPEER 55 SP myself , it went quick. Too quick, now I've got about 2,500 left now. In my RAR I found the same thing a little slower is OK for them.
I have the same rifle in both 556 and 350 legend. The 350L is set up as a brush gun with a Romeo 5 red dot as it's only good for about 150-200y anyway. The 556 I am undecided...Had a cheap 3-9x40AO on it but It adds a lot of weight and I just didn't like it all that much. Will be trying a 1-6 LPVO on it next to see how it does. Cheers. Great content and would really like to see how that OK pig hunt goes!
Try loading 69gr barnes matchburners. Cheap bullets with insane consistency. Ive shot 5 round groups that are one ragged hole. Never shot more than 3/4 moa with my hand loads with that bullet in this gun
Great video! I've been seeing good things regarding speer bullets. Would like to try some out when my other projects are finished. Can't wait for some more videos in the new year!
Gun looks good. I'm wanting one for coyotes specifically but not sure what grain to use. The dogs in montana and oregon are decent size. Biggest one I've killed was 48lbs
Do you get better groups with the .223 or the 5.56??? Considering same grain and such, the appeal of this Ruger is the price point of this rifle and being able to feed it inexpensive ammo. The Ruger American Ranch in 5.56/.223 and 7.62x39 is a great addition to any arsenal, although I would probably lean towards the Ruger American Predator in the .223 for the longer barrel but not sure if it’s chambered for 5.56 NATO also???
I am interested in this rifle but the one thing holding me back is that I reload subsonics (dont care about others opinions on it). 1/8 twist is kind of the border for 75 gr subs, but I suspect it will be find considering 75 gr HPBT hornadys are claimed to work with 1/9.
@@ChuckinTV 55 grs will stabilize no prob. 75 gr though are hit or miss. I had a 1/9 and 75 were border of no go. Now I got a 1/7 twist 11.5" sbr and 75 gr definitely work great.. 1/8 has me leery but I think they will work fine. I just found 85 gr bullets that will seat to AR mag length, so the insanity continues.
What brake are you using? I just put one on over the weekend and it definitely helped with muzzle rise. But the concussion is terrible lol. For a .223/5.56
Steven Carlin haha yes it increased the muzzle report to almost insane levels. Especially under the shooting hut roof. This is a cheap strike industries muzzle brake.
This was just a simple test to see if these bullets are even worth more testing. I would they did okay. A little fine tuning would definitely improve the groups.
Once again, thanks for watching. This rifle is a handy package. It is capable of very good accuracy and it shoots a very practical round. Ruger Americans by all accounts are just very nice budget rifles. We appreciate the international support.
@@MW-bi1pi maybe so in a semi auto..... but in a bolt that doesn't matter. I would assume it's more for looks. Call it a cool looking thread protector. I bought one in 300 black and I love it. Thinking of buying one in 556 but we shall see.
@Reel-Lentless yes I know it reduces recoil. And I bet if I mixed a mag of 5.56 and 223 you would never know the difference. And I was simply just making a funny comment lol breaks were originally intended for heavy loads with alot of recoil.
It would help if you gave us chronograph Data. You gave us 27 gr. Data 25 Gn. Data one the 25 looked good. Now go up by .25 gn. To 26 just my thoughts.
Another great review. I just ordered one of these and can’t wait to shoot and reload for it. Do you think it will handle some of the lighter bullets, like 52 grain hollow point boat tails? I guess I can load some and find out, but any tips you can offer would be appreciated. I hope to get back to supporting you on Patreon before too long. Really enjoying the reloading content.
Thanks John. I really don't know how well this rifle would like a 52gr. Let us know if you try some. With the 1-8" twist I would maybe try 60+gr bullets first. Midway has a pretty good selection available right now surprisingly. I got some 60gr Sierra Tipped MK for the Kel Tec recently. Gotta try those sometime.
@@ChuckinTV thanks for the fast reply. I looked through my bullet stash and have some of the 55 grain Speer varmint bullets and some of the 60 grain Sierra tmk as well. I may have to wait a while to stock up on bullets but will definitely look for some heavier ones. Thanks again.
1:37 So if you wouldn't mind can you tell me where I can find that ammo for the prices you mentioned, I looked everywhere and I can't seem to find any 556 or 223 ammunition.
I don’t reload so do you have any recommendations for factory loads that work well in your rifle? I can usually find the .223 easier in my area. Also, I was considering a suppressor purchase. Do you have any experience with a suppressor?
No experience with suppressors. But I would highly recommend some Frontier 223 in 55gr Soft points if you can find them. Frontier makes a variety of loads, but I think any of them should shoot half way decent out of the Ruger Ranch.
jesse reece I agree. This gun is very picky with the loads given the short barrel. I didn’t get a chance to film the 73gr ELD MATCH load. I’ve got 5 of those touching at 100yd but they are veryyyyy slow.
@Reel-Lentless Sorry but you are terribly wrong. Maybe you should study up on the subject. You cannot use a 5.56 in a rifle that is only made to shoot 223. The difference is the 5.56 has a higher pressure than the 223 and by using it can damage your rifle. blog.cheaperthandirt.com/223-vs-556-which-ammo-in-my-gun/
The good news is that it's even legal and available in Australia so I'm getting a Ruger Ranch 5.56 to complement my Ruger Ranch 7.62x39.
I recently bought this same gun....thanks for the mcarbo tip, worked great....hornady 55 gr varmint express and 45 gr winchester jhp factory loads shot 3/4" groups....does bark a bit...
Don’t forget about the 60gr Hornaday v-max its an absolute hammer!
My ranch likes 25.5 of Varget with 55grn Vmax's, it also shoots well with H335 and W748. Another nice load is 23.5 of H322 with a 50grn Vmax. Those rifles shoot 1/2 MOA pretty easily once you find the right combo. My OAL is 2.240 for the Vmax loads. I bet CFE223 would get you where you want to be as well.
Suggestion..Stick with the Varget and do a ladder test. Varget is extremely flexible across various weather conditions. There's videos online on how to do it. Use the results from the ladder test to determine the right grain of powder.
Garret real like your rifle sit up. I was a Cabelas and seen this rifle for the first time, real look nice for a plinker to care around in hills or play with a range. I been reloading my own ammo for 40 + yrs. Seeing as your group open up when you went from 25 gr to 27 gr, I would try loading some rounds at 24 gr and 24.5 gr. see what that gets you.
Also I would look at a heavier gr bullet with a 1.8 twist a little heavier bullet may give you a tight group. Good luck on finding that special load.
I wish you lots of fun with new rifle.
Flatlander69 thank you very much! Sorry for just now getting to your comment. The gun LOVES 73gr eld match. I didn’t get a chance to film this but I’ll have to in the future. I can get 5 of them to stack right up. They just are very slow.
Usually I will run shit to get the cosmoline or whatever they use to get keep the barrel, before shooting but I will say Ruger and savage are making some of the best bolt guns on the market IMO. Remington has went so far down hill that I wont even build off of the NEW actions anymore. 9/10 I will find an old wore out remington rifle to build off of.
Hi Chuck’n you have vertical groups !! If you loosen the action screws, then press down on the Tip of the Tang, The barrel WILL ROCK UP AND DOWN 2 Inches !!!! Fix is to remove the barreled action, cut both tips off a popsicle stick, place both tips under the tip of the Tang, reinstol the barreled action and tighten down the action screws !!!! Remember, when you put the barreled action back in the stock, push the action toward the rear of the stock !! Should really help your vertical groups because barreled action can’t rock up and down !!
loved the video. I have a Ruger American myself and have hunted with Rugers for years.
Also try the 69grn Sierra MatchKing with that rifle's 1:8 twist, varget is a good powder to used with that bullet.
Hey man th 69gr SMK is the next bullet I want to try in this gun since it ran my 69gr match loads so 8063739092974795 Would you recommend the SMK for a good yote or Wolf round??
Great video quick and to the point!
Yes, that's better,..I like a muzzle brake too, even though a spectator may not!!
Haha, glad you checked our part 2. Hopefully Garrett will break it out again.
Speer 70gr soft points hit like a Freight Train and at 13$ abox it’s a good option in fast twist rifles.
Thanks for you test!!!
Mine is a first gen in .223 Rem. Rotary magazine and not threaded on the muzzle. I got a great deal on my first 1000 of the SPEER 55 SP myself , it went quick. Too quick, now I've got about 2,500 left now. In my RAR I found the same thing a little slower is OK for them.
I have the same rifle in both 556 and 350 legend. The 350L is set up as a brush gun with a Romeo 5 red dot as it's only good for about 150-200y anyway. The 556 I am undecided...Had a cheap 3-9x40AO on it but It adds a lot of weight and I just didn't like it all that much. Will be trying a 1-6 LPVO on it next to see how it does. Cheers. Great content and would really like to see how that OK pig hunt goes!
I like this line of rifles. However, I wish they offered them in longer barrels & varmint barrel options.
Agreed!
They do, it’s called a Ruger American predator
Try loading 69gr barnes matchburners. Cheap bullets with insane consistency. Ive shot 5 round groups that are one ragged hole. Never shot more than 3/4 moa with my hand loads with that bullet in this gun
We will give them a try for sure!
Try it with your right hand back on the rear bag.
Blc-(2) 26.5g
I've had great experience with a 55g v-max
Great video! I've been seeing good things regarding speer bullets. Would like to try some out when my other projects are finished. Can't wait for some more videos in the new year!
Gun looks good. I'm wanting one for coyotes specifically but not sure what grain to use. The dogs in montana and oregon are decent size. Biggest one I've killed was 48lbs
Good video
Do you get better groups with the .223 or the 5.56???
Considering same grain and such, the appeal of this Ruger is the price point of this rifle and being able to feed it inexpensive ammo.
The Ruger American Ranch in 5.56/.223 and 7.62x39 is a great addition to any arsenal, although I would probably lean towards the Ruger American Predator in the .223 for the longer barrel but not sure if it’s chambered for 5.56 NATO also???
55g nosler varmageddon over 23.5g of h322 will get the gun under 1/2 inch.
Thanks. I shoot the 53gr Varm in my 22-250. They are very accurate bullets.
Thanks for the review ! I just ordered one of these in 5.56, can't wait to run it. Side note, what company makes that camo jacket ? Thanks again !
I am interested in this rifle but the one thing holding me back is that I reload subsonics (dont care about others opinions on it). 1/8 twist is kind of the border for 75 gr subs, but I suspect it will be find considering 75 gr HPBT hornadys are claimed to work with 1/9.
shopsmart57 I shot some sub 55’s out of it the other day. 3.1gr of titegroup and they worked quite well!
@@ChuckinTV 55 grs will stabilize no prob. 75 gr though are hit or miss. I had a 1/9 and 75 were border of no go. Now I got a 1/7 twist 11.5" sbr and 75 gr definitely work great.. 1/8 has me leery but I think they will work fine. I just found 85 gr bullets that will seat to AR mag length, so the insanity continues.
Get you some IMI 77 grain open tip for it
Look at the head stamp bet it says lake city
Try IMR 4895 24 grains 55 grain bullet
Has any of you guys put a chimney trigger on that gun, yet? Looking to get feedback on how it works, especially the creep.
Use TAC near max load with a 62gr bullet
Didn't hear how far you are shooting?
What brake are you using? I just put one on over the weekend and it definitely helped with muzzle rise. But the concussion is terrible lol. For a .223/5.56
Steven Carlin haha yes it increased the muzzle report to almost insane levels. Especially under the shooting hut roof. This is a cheap strike industries muzzle brake.
what height rings? Im waiting for mine, but can't decide on a scope. I want to keep it low but also run a 44mm lense.
What if you drop the charge to 24 or 24.5? Worth a shot just for curiosity sake.
You might try load development in half a grain increments. Going in 2 grain steps doesn't help.
This was just a simple test to see if these bullets are even worth more testing. I would they did okay. A little fine tuning would definitely improve the groups.
Will the 350 legend mags feed 223 ammo?
Morning buddy 😁 from England nice looking setup. Is it comfortable to carry,freehand. Thanks for ya time. 🇬🇧👍🍀
Once again, thanks for watching. This rifle is a handy package. It is capable of very good accuracy and it shoots a very practical round. Ruger Americans by all accounts are just very nice budget rifles. We appreciate the international support.
Stealth Andy Steath : This rifle is so handy! Carries great! My favorite of all my rifles.
@@philippinelady1042 hi from England. Have you any video of you useing it. An which scope do you use. Hope to here from you soon. ATB Andy
Muzzle brake, to tame that heavy hitting 5.56 lol
It keeps the crosshairs from bouncing off the target upon firing
@@MW-bi1pi maybe so in a semi auto..... but in a bolt that doesn't matter. I would assume it's more for looks. Call it a cool looking thread protector. I bought one in 300 black and I love it. Thinking of buying one in 556 but we shall see.
@Reel-Lentless yes I know it reduces recoil. And I bet if I mixed a mag of 5.56 and 223 you would never know the difference. And I was simply just making a funny comment lol breaks were originally intended for heavy loads with alot of recoil.
@@mattlyons8180 It's a 6 pound rifle, sticking a muzzle break will definitely help reduce recoil
Looks cool to the owner. Nothing wrong with that IMO.
Try H322
Joe Chrisman will give that a whirl!
It would help if you gave us chronograph Data. You gave us 27 gr. Data 25 Gn. Data one the 25 looked good. Now go up by .25 gn. To 26 just my thoughts.
Great vid and thanks for sharing your load data. Have you compared your ranch to the predator 22"? Thanks
Thanks, no we haven't
Another great review. I just ordered one of these and can’t wait to shoot and reload for it. Do you think it will handle some of the lighter bullets, like 52 grain hollow point boat tails? I guess I can load some and find out, but any tips you can offer would be appreciated. I hope to get back to supporting you on Patreon before too long. Really enjoying the reloading content.
Thanks John. I really don't know how well this rifle would like a 52gr. Let us know if you try some. With the 1-8" twist I would maybe try 60+gr bullets first. Midway has a pretty good selection available right now surprisingly. I got some 60gr Sierra Tipped MK for the Kel Tec recently. Gotta try those sometime.
@@ChuckinTV thanks for the fast reply. I looked through my bullet stash and have some of the 55 grain Speer varmint bullets and some of the 60 grain Sierra tmk as well. I may have to wait a while to stock up on bullets but will definitely look for some heavier ones. Thanks again.
That rifle is legal in new york? Or is it limited in magazine capacity?
It is legal. The capacity isn't an issue because it is not a semi-auto.
If this is 1/8 twist wouldn't you start with 62 gr bullets
Can that 5.56 nato shoot 223 Remington?
yes
What Muzzle brake?
Where did you get the magazine? Mine came with a flush mount box mag.
This is a newer model that takes PMags.I believe they originally came out only offering the flush fit rotary mag. This came with the 10 round mag.
What scope did you put on there?
Can that 5.56 also shoot 223?
yeah this gun can shoot both.
hey chuckin ! where can i buy that jacket :D
How far out is the target?
I couldn’t imagine selling something to my son.
In my opinion, no need for muzzle brake on 5.56, for .308 yes. Too loud at the range.
I always considered 556 NATO and extremely late recoiling load it was laughable to begin with
1:37 So if you wouldn't mind can you tell me where I can find that ammo for the prices you mentioned, I looked everywhere and I can't seem to find any 556 or 223 ammunition.
This video was 2 years ago. A lot has changed bud 😂
@@primer3458 Yeah I know that was the point of the comment, no one can find that ammo at those prices today.
.22 lr, haha
@@paulpence8895 What does 22lr have to do with anything? I've probably got 50,000 rounds of that junk laying around.
What height rings are you using?
Tom Tom they are highs
@ Chuckin - Thanks for the information. Have the same gun, runs nice!
What part of NY?
I don’t reload so do you have any recommendations for factory loads that work well in your rifle? I can usually find the .223 easier in my area. Also, I was considering a suppressor purchase. Do you have any experience with a suppressor?
No experience with suppressors. But I would highly recommend some Frontier 223 in 55gr Soft points if you can find them. Frontier makes a variety of loads, but I think any of them should shoot half way decent out of the Ruger Ranch.
What kind of camouflage is that?
The company that makes it is Kooyu. I'm not sure what the pattern is called, but it is really high end. You see mountain sheep hunters use it a lot.
Anyone every tri Tulammo Steel 223 in one of these? I have a hog problem
Those are not good groups for reloads.
jesse reece I agree. This gun is very picky with the loads given the short barrel. I didn’t get a chance to film the 73gr ELD MATCH load. I’ve got 5 of those touching at 100yd but they are veryyyyy slow.
Tell me this video was recorded 2 years ago without telling me it was recorded 2 years ago... 1:34
yeah it's sad
You can own a bolt action rifle in New York 😂😂😂
Yes, but the bolt, barrel, and stock must be kept in separate safes ammo must be stored in Ohio.
to much moment on the bench brother to much reset.....
A muzzle brake really?
What brake is that?
Strike Industries War Hog?
You’ll never get a good group holding the rifle like that took an arm under the back yous it as a rest
Freezing?lol😂🇨🇦
Technically you are shooting a .22 lol
Yeah, I'm not sure the 0.003 is that much of an increase. Haha.
It’s .556 but whatever. Same shit kind of. You don’t like shooting 22s?
@@lessforloans I love 22LR. Also, 5.56 is still a 22 caliber.
30 cents a round :(((((((((
I don't believe you can use 5.56 in that rifle. It's only for 223 Remington.
Robert Brumley this gun is specifically built to accept 5.56.
@@ChuckinTV My bad. I thought it was only chambered in 223.
@Reel-Lentless Sorry but you are terribly wrong. Maybe you should study up on the subject. You cannot use a 5.56 in a rifle that is only made to shoot 223. The difference is the 5.56 has a higher pressure than the 223 and by using it can damage your rifle. blog.cheaperthandirt.com/223-vs-556-which-ammo-in-my-gun/
Do your homework. it is chambered in 5.56
My RAR is 556...