I have the same gearbox with t238 brushless motor. For me it was easier to center the motor by wrapping aluminum tape around the motor so that the motor doesn´t move at all in the pistol grip.
I can't cnc motor tower, but i can adapt 10mm stainless tube for base motor tower. And i think rotating this tower can scrap gbox window, so better fix this.
Do you really think that the tower rotates with the motor shaft movement? The tower is just a big bushing with which you connect the motors body with gearbox. It also acts as a controlling axel point due to the installed bushing/bearings. There are no rotations on the tower except the motors shaft. You can use any metal sleeve you have in hand. The softer, the better if you dont have a lathe, of course.
Any aftermarket motor guide shafts (the tower) that have a thicker diameter than 9mm? I am having the exact issue where my motor moves back and forth a little inside the gearbox.
@@AC-AirsoftCustoms Follow up question. If I'd want to order motor from you with the helical gear already installed, you would need diameter of the engine tower hole on gearbox?
I have the same gearbox with t238 brushless motor. For me it was easier to center the motor by wrapping aluminum tape around the motor so that the motor doesn´t move at all in the pistol grip.
good video
Thanks for the info, much appricated
Nice video, keep up the good work
I can't cnc motor tower, but i can adapt 10mm stainless tube for base motor tower. And i think rotating this tower can scrap gbox window, so better fix this.
Do you really think that the tower rotates with the motor shaft movement? The tower is just a big bushing with which you connect the motors body with gearbox. It also acts as a controlling axel point due to the installed bushing/bearings. There are no rotations on the tower except the motors shaft. You can use any metal sleeve you have in hand. The softer, the better if you dont have a lathe, of course.
Is it possible to change the axle for a longer one? I have a GBLS that needs 40mm long tower and all the normal "long" axles are too short for that.
I dont know anyone who can do that. Even i failed, i tried to disassemble it once without damage, and it wasn't successful.
Any way I can buy those spacers for the motor shaft you mentioned?
Any aftermarket motor guide shafts (the tower) that have a thicker diameter than 9mm? I am having the exact issue where my motor moves back and forth a little inside the gearbox.
So did you have to grind the engine shaft or just press fit it?
Just press fit, and i used glue, so it doesn't spin on the axle.
@@AC-AirsoftCustoms Follow up question. If I'd want to order motor from you with the helical gear already installed, you would need diameter of the engine tower hole on gearbox?
Contact me via Facebook page. Easy to discuss there.
facebook.com/airsoftcustoms
What did you do in the bevel tower to prevent it failing ?
Hey i contected you on facebook regarding these motor towers. If youre selling any, id be interested in a few!
По русски почему не говоришь?)
Нет. Sorry, I am Bulgarian. i don't speak Russian, but i do speak English and Spanish.