After 26 years of shooting recurve bows, with breaks (a lot of years without doing so), this videos made me finally order the limb gauges. When the screws won't get the job done. :)
Really great video! Currently working at a school where I've joined the archery club. The teacher/coach has been quite busy for a while now so while I've progressed up to the 50m/70m shooting range I've been wanting to tune my bow again but haven't had the chance. I'll talk with him about what I learned and let him know about any changes I plan on making or problems I see!
Very informative and interesting video - more please 👍🏼😊 - Can you recommend a good tiller bolt position (how many turns away from the riser)? My coach told me there should be a max of 2 turns - especially for the Hoyt Xi and Velos limbs - the efficiency of the limbs will be perfect... is that right?
Hello Sjef and all Triple Trouble team, excellent videos!! I have a question about BEITER PLUNGER: Could you specify the correct size for hoyt formula x riser? 5/16”-24 or M8x0,75? 53,5mm or 61,5mm thread cylinder? Correct Screw length, pin, nut? Thank you for the info!
This is a completely allien world to me ... still very interesting ... at the ranges I shoot (max 35 meters) this level of detail does not have much influence. However it is still very interesting to see what the high end is capable of. Can't wait for the tuning video ...
A well set-up bow makes a difference no matter what distance you're shooting at. Everyone really shoould take their time to get their equiment tuned. It's very rewarding, and you learn a lot along the way.
So Douglas mentioned with an X10 to have half the shaft visible behind the string. What's his view on parallel shafts? Some say the full shaft, some say fully behind the string.
@@patricksteele the sjef scope I think is fixed so you can't change the fire ring pin... The full size curve rx scope allows you to change pin size and colours if you buy the separate fire ring pins... The 0.19 is difficult to see and struggles to pick up light especially indoors in sports halls... Outside it is fine The housing on the curve rx Pro is long and might feel bulky if you're using it on a field setup with changing distances... On fixed rounds like 18m or 70m you can set the angle of the housing so its the correct angle for viewing through.... This is the reason why the sjef scope is thinner so you don't have this problem if you change vertically on your sight
Hello Sjef, i am a 3D shooter and I love watching your videos. I would be very interested in the speed of your bow in feet per second. I canˋt find any information about topshooters arrow speed at the web. So, if this is not a secret, please tell me. Thank you!
Adding subtitles is a lot of work unfortunately. We have selected the option for people to add them for us or for TH-cam to add them automatically, it's not up to us on that front.
They are called the 'Vertatune plate' and you can put the plunger hole higher or lower, so closer to or further from the grip. This can make a difference in tuning to your personal preference
Hello! can you make videos with subtitles in Spanish please .... more than anything else in technique! which are the most important thanks and very good videos !!!
After 26 years of shooting recurve bows, with breaks (a lot of years without doing so), this videos made me finally order the limb gauges. When the screws won't get the job done. :)
Hahaha exactly, I've been shooting for 8 years and just ordered my limb gauges
Check out tuning forks instead.
Very nice, I like the chair idea.
Thank You for the information. Very nice video.
This Is what i really need to watch!!!Thnks Triple Trouble
Bonjour . Excellente video . Quelle est la marque de votre stabilisation ? Amicalement
Really great video! Currently working at a school where I've joined the archery club. The teacher/coach has been quite busy for a while now so while I've progressed up to the 50m/70m shooting range I've been wanting to tune my bow again but haven't had the chance. I'll talk with him about what I learned and let him know about any changes I plan on making or problems I see!
Very informative and interesting video - more please 👍🏼😊 - Can you recommend a good tiller bolt position (how many turns away from the riser)? My coach told me there should be a max of 2 turns - especially for the Hoyt Xi and Velos limbs - the efficiency of the limbs will be perfect... is that right?
You can give it a maximum of 6 turns out, and I typically shoot it 3-4 turns out, depending on how well the poundage matches my need.
Great video!
Hello Sjef and all Triple Trouble team, excellent videos!!
I have a question about BEITER PLUNGER: Could you specify the correct size for hoyt formula x riser?
5/16”-24 or M8x0,75?
53,5mm or 61,5mm thread cylinder?
Correct Screw length, pin, nut?
Thank you for the info!
That grip looks wonderful. Is it a commercially available one?
Soon in stock! Link will be posted on this page
@@TripleTroubleArchery Excellent!! Thanks for the reply.
This is a completely allien world to me ... still very interesting ... at the ranges I shoot (max 35 meters) this level of detail does not have much influence. However it is still very interesting to see what the high end is capable of. Can't wait for the tuning video ...
A well set-up bow makes a difference no matter what distance you're shooting at. Everyone really shoould take their time to get their equiment tuned. It's very rewarding, and you learn a lot along the way.
So Douglas mentioned with an X10 to have half the shaft visible behind the string. What's his view on parallel shafts? Some say the full shaft, some say fully behind the string.
Would have been nice to have the camera behind Douglas, to see from his point of view limbs alignment and also center shot.
Which option of your scope do you shoot? The .019 or the .029 option?
Currently using the .019!
@@patricksteele the sjef scope I think is fixed so you can't change the fire ring pin... The full size curve rx scope allows you to change pin size and colours if you buy the separate fire ring pins... The 0.19 is difficult to see and struggles to pick up light especially indoors in sports halls... Outside it is fine
The housing on the curve rx Pro is long and might feel bulky if you're using it on a field setup with changing distances... On fixed rounds like 18m or 70m you can set the angle of the housing so its the correct angle for viewing through.... This is the reason why the sjef scope is thinner so you don't have this problem if you change vertically on your sight
Bonjour . A 11'36 , quelle est la marque de l'attache rapide que vous utilisez pour fixer la stabilisation ? Amicalement
Hello Sjef, i am a 3D shooter and I love watching your videos. I would be very interested in the speed of your bow in feet per second. I canˋt find any information about topshooters arrow speed at the web. So, if this is not a secret, please tell me. Thank you!
very good video
the small plunger screws have nylon cushions underneath
Beiter does but not all of the brands do
What is the brand and type of bowstring?
Very good بسیار اموزنده
Hello Sjef.
What is the thickness of your bcy652x bowstring in threads?
Thank you.
all we need to know is his poundage. If he is shooting above 44lbs, it will usually be 18 strands if im not mistaken.
That flat black anodize looks super stealthy sexy!
Hi Sjef, what length side rods do you use?
15 inches
Thank youuuu
Where did you get that small extender?
It's actually just a normal eye bolt that comes with a lot of vbars
Can u add subtitle or open it automatically?
Adding subtitles is a lot of work unfortunately. We have selected the option for people to add them for us or for TH-cam to add them automatically, it's not up to us on that front.
How mach price arrow and bon
Hai
Suggest me
Which recurve bow brand products for
My 15 yrs boy
Height : 4.50 mts
Brand accessories and where it can available
Lol. Are you saying your boy is 4.5m tall? Haha. Try a ballista.
Hoyt medium 4eva
What's the name of those plates and what are the for exactly?
They are called the 'Vertatune plate' and you can put the plunger hole higher or lower, so closer to or further from the grip. This can make a difference in tuning to your personal preference
Hello! can you make videos with subtitles in Spanish please .... more than anything else in technique! which are the most important thanks and very good videos !!!
Kinda funny that you're wearing a compound shirt when you don't shoot it, nor is the video about it. Nothing bad tho, but something that stood out. xD
What is the difference in the arrow shaft centering if I use non barreled arrow? As I understood that setting in the video was for X10.
Parallel shafted arrows should be aligned dead centre with the string for centreshot.
@@alargecookie Thanks! Up to now I aligned the tip to the left side of the string (right handed), but I'll set it to the center.
Ive heard that some may find it more forgiving even for parallel shafts to be slightly off to the left to compensate for the release
Sjef: 13 or 30?
Let's do 24
You dont need Sights at all
IMHO
Well, I do! :)