The Ugly Truth - S&B Intake on 3.0 Duramax Diesel Silverado
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Shop Real Carbon Fiber Accessories: www.SimplyCarb...
Use "DW10" for 10% OFF
S&B Intake installed - Started with a baseline run using the Dragy (link below) to get a starting point on how the truck was performing today. Then installed the airbox only, followed by a comparison run. Installed the full pipe, completing the Intake. Made a run then removed the side cover for the most airflow followed by a final run, giving us the numbers to see if this intake helped gain any power.
2022 Silverado RST Duramax Diesel 3.0 LM2
LM2 Silverado / Sierra related Amazon Affiliate Links:
DRAGY -LAPTIMER - amzn.to/3z7R03V
amzn.to/3GaMeUV
Oil Change - amzn.to/3Ncjrll
Fuel Filter - amzn.to/38nTEI3
Air Filter - amzn.to/3wjNRv3
Cabin Air Filter - amzn.to/3Pg29W1
As an Amazon Associate I earn from qualifying purchases.
#duramax #silveradorefresh #lm2 #2022silverado As an Amazon Affiliate / Influencer, I earn from qualifying purchases. Your support is appreciated as it helps the channel to continue to test products!
www.duramaxnews.com
Personally I think the truck needs about 60/100 miles to retune or map the air intake learn where to be and you’d probably see a greater improvement. Really enjoy the channel and knowledge Thank you sir.
This is not how it works Christopher. The factory ECU is not designed for the increased airflow, intake. You will actually get a performance loss. The only way to get increased performance, efficiency is to tune the ECU. He is just wasting money otherwise. I know what I am talking about, I have had to heavily modded diesel trucks. Tuning will make the biggest difference, at the end of the a day, a smaller engine like this, and the gains are really minimal. 6-10hp max and a little torque with the intake . That’s with tuning it.
@@calebniederhofer6529 do you have any intel on tuning options? I see Banks still has yet to come out with anything.
Update video? What’s your new MPG? Any improvement? How do you remove the air filter to clean & at what mileage do you have to clean the air filter? No videos out there with this info or updates.
Thanks in advance!!!
A tenth of a second equals 350 dollars, I think I will keep my KNN filter that fits the stock housing. Not worth it, if your after noise that's all personally preference. That platform needs a different tune to see a real difference. If s&b goes on sale, I might consider it. Thanks for the content. Take care !
Works better then the S&B on a 6.2. my Dragy / race box testing showed a loss of 3 tenths. Makes the 6.2 a total dog off the line. I believe it messes the MAF sensor reading up. Took it off and sold it.
I have an 07 Chevy Avalanche. I first installed an airaid intake tube with a drop in k&n filter in the stock intake box. I ended up finding an airaid cold air intake on Facebook marketplace with the filter and filter surround. I did a 0-60 with the stock box, drop in k&n filter and the airaid intake tube and did another 0-60 with the cold air intake and there was less than a second of difference in the times. I kept the airaid intake tube and the stock air box with the k&n filter and sold the cold air intake. Not wasting my money on cold air intake again.
I’ve done it all on my previous truck, and while I’m still interested and looking at video like these I’ve told myself I’ll never do mods again, just some estethic small stuff is all, i had a lift, big tires, cold air intake, exhaust, all kinds of stuff and in the end it looked awesome but it ride like shit, noisy, shaky, more fuel ecc..there’s actually a group of engineers making engine in details, and for good reason.
I hear ya! I did the exact same thing on my previous truck. Till it became just unreliable and uncomfortable. Now I travel a lot in my life and many times I have my son along with me. So my moding days are done.
Everyone always says CAI are a waste of money and time in this case your numbers prove otherwise how Brian Rodrigues doesn’t see that is beyond me unless for his money he needs to see something more that I do understand and for the money the S&B system is really very well priced for what you get so with that said obviously there is an improvement be it small but it’s verification that it does flow better than OEM not to mention the sound improvement which just for that it’s worth the money IMO so a slight gain in flow performance is just a bonus thank you for your efforts I know doing things like this take up a lot of time but I for one find the information very helpful.
I absolutely agree ! Not shown in the video is the improvement in overall driveability and response. I think the truck has also adjusted itself and will do another test to see if I can get a personal best out of the dragy app.
@@DemonWorks
I didn’t think of the fact the truck will need some time with the new parts to relearn with the performance gain’s very good point!
@@adamtaylor5590 if you listen closely to that part where I first start it up, you can hear the engine and turbo surge several times. It leveled out after that but there was an immediate change it had to adjust itself to.
@@DemonWorks
I will go back tonight and listen to it again for that thanks
Chasing dyno results can often lead to erroneous results and trying to measure results with a draggy is one up from a butt-dyno. We do know for a fact that these S&B CAI's do what they are intended to do, and that is they reduce the amount of pressure loss through the intake system, i.e. the amount of air restriction in your air box. Reducing the amount of restriction increases the airflow. The cool thing with S&B is that they conduct and then publish ISO 5011 validation of every filter in every application, including the LM2 from a MY20 1500 GM truck. S&B measured results showed up to a 51% increase in airflow over the stock air intake. You get greater filtration efficiency with either of their filters and you are unquestionably increasing the flow of your intake system over the stock intake, and so that is all good!
Now, what your ECU chooses to do with it all is another story. Your ECU has both short and long-term fuel trims and they can accommodate to a certain degree for a change in the amount of air going into your motor via the tune on your ECU. GM LS/LT motors are notoriously rich from the factory which usually means you can increase the amount of air in your AFR (air/fuel ratio) and still see some gains without having to adjust your tune. If you change the parameters of your AFR too much and your fuel trims are working at their max settings to no avail, that is when you will see a CEL and need a tune.
There is a good video on YT of a MY16 GM 1500 5.3L V8 with an S&B intake before and after dyno run on the stock tune, and then another measurement after a good tune. The stock ECU had an AFR of 10.9 and the CAI alone, even with the same, stock, GM tune, then measured 11.9 after the S&B CAI install. Gains were modest of around 5 rwhp and 6 rw ft/lbs of tq. Lower RPM's just over 3k rpm saw even greater gains; 14 rwhp and 21 rw ft/lbs of tq. But after a good tune, "a little less fuel and more timing" resulted in the best (peak) gains, of course. 19 rwhp and 24 rw ft/lbs of tq. (Even larger gains at various points throughout the powerband.) Keep in mind, the first thing most tunes will do on these GM vehicles is disable torque management and there is always a slight gain to be had with that alone. FI motors should also be able take advantage of more air (as well as a tune) and deliver greater results, as well.
My point is neither a draggy nor your butt-dyno is going to give you the full picture on what a CAI may or may not be doing to your ECU. S&B eliminates a lot of the variables right off the bat with their ISO validation of each filter on every specific application, so you know their CAI is working on your specific vehicle, and that is a great place to start.
I appreciate the comment. I will disagree though, I think S&B provides filtration data on filters only and shows zero results for actual performance. I know in my applications, I have noticed several negatives with the S&B airbox installed, also noted higher intake temps. The duramax short/long term fuel trims is new to me so that tells me you are more experienced in the gas applications. Maybe those perform better. In regards to the Dragy, after several videos with my opinions, viewers requested I use that device to gather data for them. So I did, proof is in actual operation and the S&B fails. That intake pipe sure is nice though.
I'd say wait for Gale Banks to release his Derringer and intake and it'll really wake up the LM2. I'm getting my first diesel in July and can't wait for Banks to release their parts for it.
We’ve been waiting quite a while for that Derringer. I agree, it will really perform if it makes it out.
@@DemonWorks Banks does alot of R&D before releasing anything. Be patient, a market indeed exists for the product.
Been waiting for it too. I have the idash and pedal monster in my 3.0 powered 22 Escalade and my 21 GMC Denali. I love my 3.0 Duramax’s. GM hit the mark with these for sure. The 10 speed and the 3.0 is prob the best 1/2 ton pickup/suv powerplant combo on the market. My $0.02
Banks is a waste of money just wait for a delete kit
@@rock-uu7qr Delete kit voids warranty. The LM2 has been out since 2019. The iDash and PedalMonster is just a good solution that won’t void your warranty. It wakes up bottom end even more. Gets rid of the low end torque management lag. Until something else comes out it’s the best $200.00 you will ever spend for the PM. You don’t need the idash. It’s just nice to see regen, DTC codes and have the ability to reset etc. not to mention monitor every possible OBD2 parameter possible. Try it. You’ll like it. It’s cheap and effective. You can sell it when you sell/trade your truck and get your money back too. Can’t see how it’s a waste at all. My $0.02
How is is the rumble in the exhaust in cold start up compared to a V8. I am not a diesel engine guy, but a lot of folks are raving about this engine
V8 sound is far superior, not gonna lie. I have a 6.2 in the Camaro and the 3.0 in the truck, so my sound needs are met. The 3.0 engine has been great, I have a lot of videos covering it as I am on my 5th 3.0 Duramax equipped truck.
Ahah “It did nothing but I totally recommend it”
Because it looks and sounds great …
Needless additions. Just because you can change something doesn't mean you should. Besides you are voiding the warranty. On a new design in the first year in production. What can go wrong? Your engin has all the internal vitals against the firewall. A real major cost there. Yea, what can go wrong that you would need a warranty claim?
Can't void a warranty unless it can be proven it caused the failure lol that's very common knowledge buddy
I wish S&B would make the clear plastic out of safety glass instead of plastic because it scratches so freak'n easy and looks bad.
when you installed the pipe to the turbo was it hard to mount on to the turbo . i had issues when installing the ppe resonator . is there a type of oil i can use ?
Yes, the o-ring is very tight. Also, keep in mind there is a groove on the bottom that needs to be lined up. I used engine oil from the inside of the factory resonator. Wiped it in my finger then in the oring. If it’s still tough, remove the clip from the pipe and install that after you slide the ppe pipe in place.
Thanks for the stats...I've had my S&B Intake on for 50K+ miles so far and love it. I gained about 1 - 1.5 MPG in fuel efficiency (if I can run under 75 MPH...LOL) I suggest not taking off the S&B rubber grommet on the side, as I did a MPG test on mine and I lost about 1.5 - 2 MPG.
Yeah, the side plug gives it the extra noise at a cost, for sure. Thanks for sharing your findings, i'm sure it will help others as well.
Thanks for the informative info.
I’m just gonna keep the PedalMonster and put back the rubber on intake and see if that helps power a bit I do like how the s&b sounds though
How is the pedal monster? I’m considering buying one
It’s the best thing out there in my opinion and it’s packed with engine data go buy one you won’t be disappointed
I remember seeing a video of you talking about 3.0 mods where you talked about an affordable code reader for the consumer. Can you give me that model number ? I’ve been searching your videos but can’t find it again.
Sorry for the late reply,
The Launch Elite was used in a few, this is a great budget level bidirectional scan tool : th-cam.com/video/6p0Q4EQgrVA/w-d-xo.html
Then I did use this one that is much cheaper and still does a lot : Launch X431 amzn.to/47bDDOr
Dose this void the warranty on the truck?
Pretty decent
Anyone knows if it's normal for this air intake system to suddenly make hardly any noise sounds so quiet now... I would be able to hear it just idling and light throttle and now sounds like if I don't even have a s and b system
Not normal. Very odd, for sure.
@DemonWorks I'm hoping maybe a pipe is leaking a little and just need retighten or adjustment just weird because no check engine light and truck drives fines might have to call s and b
@@josegaeta815 it’s not a S&b issue, if it is in fact an issue. Double check your connections.. the turbo makes the noise, the intake just makes the sound audible versus the factory system containing it.
Wow 22 mpg AVG and you are flooring it. The more I watch your videos the more I am convincing myself to jump brands. Specially with the new LZ0 coming up. I am a Ram guy but they haven't done anything to improve the Eco diesel.
LZ0 is going to be a homerun for GM
I was also a ram guy but this new LZ0 in my 2023 silverado is awesome. Average around town is 22. Best I have seen is 31 so far. This gets better mileage than my Harley.
With my LM2 Sierra I'm seeing consistent average in the 30s. I do drive Highway a lot. But even so it's amazing where my best is 42 mpg
Did you ever see a difference in mpg?
on the dash, yes. On my hand calculations, not for the better, it went down
I know you're a busy guy, but will the intake and ppe resonator delete void warranty? I just got an emissions system, trans, and engine code. I'm not sure if I need to uninstall everything. Thanks!
Hey! That stuff won't void your warranty, it "could" just possibly cause some confusion and they would request to have it removed. If you are able to, I would suggest to remove it beforehand.
@@DemonWorks Thanks for the input!
Great Vid
Thank you !
Have you thought of testing a product like the Banks Pedal Monster? I imagine the computer is not allowing the gains from the intake to be prevalent since it's still limiting throttle response even when your foot is all the way down.
I have not given that much thought. I'm mentally against the throttle foolers. I feel that if I want more throttle commanded to the ecm, I will just give it more with my foot. That being said, i have not personally used one outside of a Camaro.
It's on the back of my mind to try one. maybe I will give it a go in the near future to see if it improves on anything.
@@DemonWorks my thought is that even if you put the pedal all the way down, the system gives a times release of that input, thus not doing exactly what your foot is intending.
I have the banks pedal monster on my 22 lm2 and I love it. Came from a 6.2 to this and needed something to wake up the duramax. With a good launch it feels similar to the 6.2 but dies out after about 50 mph.
Now that we are basically ruining the same stuff despite the exhaust. Let me know if you get any evidence of that cel. Truck is going in to get checked out tomorrow for my cel. I’m about to place bets on what they’re going to say this time. I really want to love this truck but if a simple intake swap is going to cause I code that’s a true bummer. Unless I did something wrong on the install that’s causing it, I would accept the mistake and fix it. But I have ran through everything on the intake and haven’t found a single whoops. I’ve even tried doing research on the code and these codes seem to be with the 19s and 20s. I’m at a loss just as much as the dealer.
Yeah, I’m a tech at a dealership. I don’t see the intake being the cause of your nox code 😞 wish you were closer so I could take a look at what’s going on. If that is your only dealer, you may be better off taking the intake off so they can diagnose the issue in stock form then just put it back in?
@@DemonWorks that would be awesome to have some one like you that can check it out. I’m now having the def range low indication on the Chevy app even though I put 2 boxes of def in yesterday. The meter showed full, drove about 250 miles hauling my 5k trailer and it’s only dropped one bar. 🤬
@@toddmeadows1576 That will take some time to reset itself. The system seems to default to worst case scenario when towing and it takes some driving around unloaded for a while for it to start going back to normal.
@@DemonWorks dealer just called, they are blaming the intake saying the truck needs an aftermarket tune now. And refuse to try and diagnose anything until I put the stock intake back on. Just got off the phone with S&b and they again said there is no way the intake can cause this code and it’s unacceptable that they won’t diagnose the issue because the intake being installed.
I have a refreshed 22 AT4, will the S&B mod void the factory warranty?
The intake would have to cause an issue for that to be the case.
@@DemonWorks ok thanks for the quick response.
Just installed this on my 3.0. I noticed a slight increase in def consumption. Did you have that issue? Ideas on what may be causing it?
I did not notice this but I also don’t keep track of the def that much. I just add when necessary and it hasn’t been much, about 3 gallons in 5000 miles.
Def usage is vehicle usage dependent. Towing and aggressive driving will add to def usage. So maybe it went up just from added pedal effort to hear/feel the new intake?
Is it worth it for sound? Looking for a little more whistle
Thanks for the video. What app are you using to provide the female voice speed indicator?
That was from the app for the draggy unit.
@@DemonWorks Thanks again! I bought a trail boss this past weekend (w/LZ0) based on the info learned in your videos. I'm still working my way through all of your videos. Any mod suggestions that are a must? Adding leather, running boards and fender flares today.
@@scottwilson2953 Honestly, my favorite best bang for the buck mod is the trans cooler ! www.demonworkshop.com/product-page/ppe-transmission-cooler-2019-2023-silverado-sierra
@@DemonWorks Thanks Man! Appreciate you taking a minute to respond. I'm going to order that Trans Cooler today. Take care.
@@scottwilson2953 nice ! I have a few in stock right now!
I just got GMC 1500 refresh with this engine since my Ford was a warranty case for 3 months. Any of these mods you've done affect the warranty?
I bought the same refreshed 22 trail boss. This mod kills the GM warranty for any engine issues.
Depends on your dealer really or gm….no modifications can void warranty unless they can prove it is the soul reason it caused something to break…putting on after market wiper blades could void your warranty😂…. The Magnuson-Moss Warranty Act prohibits product manufacturers from conditioning consumer warranties on the use of any original equipment part or service. Furthermore, a manufacturer can only deny warranty coverage if it can demonstrate that a non-original equipment part or related service caused a defect to occur in the original product. In the case of motor vehicles, new car manufacturers have ignored these conditions outlined in Magnuson-Moss and have misled consumers to believe that they must have dealer service shops install only original equipment replacement parts or fear having their new car warranty voided.
@@jameslucas4181 my dealer appeared quite upfront and candid about the stipulations and how mods affect which part of a specific warranty but this act and precedent is new to me. Worth more insight. Thank you... From a. Non-legal person.
If it's written in the warranty agreement that a mod will void it and you sign it, the warranty is voided.
I have had two built diesels, and the S&B 100% does make a difference, but only when tuned for it. The factory ECU, air is not designed for a aftermarket intake. The performance will actually be worse. Until, you get hands on a available tuner, this is just wasting money.
Would like to see you add the AG Solutions tuner
I wonder if the performance will change over time as the computer learns/adjusts to the greater air flow
Bingo
Will this fit a 2022 Suburban duramax?
Not likely. S&B has one in the works for suburban from what I understand.
However, someone just posted on the Facebook 3.0 group that afe seems to say their part number is the same. I will look into it a little more
That’d be awesome, thanks!
S&B says the airbox does not fit but they are redesigning it to fit.
Very helpful info, thanks!
Did you ever get to do another test on this CAI? I am considering getting one. But if it's a waste of money I rather put it somewhere else
Not yet. I do have plans to do another one with some different parameters, but I’m battling snow off and on …
I do have the S&B intake as well as the AFE, sitting in corner of my garage.
Www.demonworkshop.com
@@DemonWorks what about the stillen air duct with SB
@@beltran091387 I think those two worked well but I had a theory on that.
I believe the s and b just sucks hot air. Add the Stillen and it brings more cool air in to bring down that temp. No data though, so it’s all speculation at this point but hopefully get that sorted in the near future
@@beltran091387 the Stillen helped it, I felt, but the Stillen made everything better …
@@DemonWorks then I will order it as well.
Unless you're gaining 10% no mod is worth it unless you just like loud engines
What are you talking about lol? 10% gain off each mod?
Wish you would do a test run with the S&B lower tube with the PPE elbow and stock air box. That’s the setup I plan on running later when the S&B tube gets here this week. Was surprised but they let me purchase it separately. $45. $75 with clams couplings and hardware
I did that set up. Currently still running it. The way to go for sure. Check my other videos, it’s in there !
@@DemonWorks what gains did you make with this set up? Looking to improve MPG
@@lyndalolson3067 for just straight mpg, I would leave it stock. The cost of parts to attempt to get an mpg gain is fairly high.
@@DemonWorks thanks!!
Yeah if you want real numbers you might as well just delete the truck, that’s really where that intake will shine
U didn’t gain anything what u thought u gained was the difference in outside temp from 72 down to 65 some one else can explain how that works
Thanks for watching !
For the OP and all the mentals in the comments, if you add an intake, allowing for a higher air/fuel ratio (volumetric/stoichiometric) without a tune your vehicle will try to compensate by adding extra fuel at cruising speed and less fuel at full throttle. You hands down need a tune, and unfortunately for the 3.0.; Until the derringer comes out, it ain't happening.
Negative. Would a tune be optimal, yes. But if the tube is the same at the maf as the stock unit, everything in front of that should not matter.
And for your knowledge, the Derringer will not do anything a stock tune would do in regards to an intake swap like you mention.
@@DemonWorks Not getting into caulk measuring contest brother, but you're incorrect. I've been tuning cars since 2003; that's when you used to have to chip ECU's and install a two pins. I'd recommend actually talking to a local tuner, just so you can learn some more.
I totally understand that some people can’t have a conversation.
That sure wasn't worth the money...
Dude it's a diesel just tune it
Ok. I’m assuming you don’t own a 3.0 Duramax?
@@DemonWorks yea bought one for my wife
@@515051506969 awesome, what did you tune it with?
@@DemonWorks I didn't it's my wife's,but I tuned my 6.6 and it runs great
@@515051506969 yeah, I knew the direction you were going to go after your very first comment. Enjoy the truck !
Any change in mileage from your mods?
Went down after the intake was installed.
@@DemonWorks weird...
@@MrWeaponlord typical really…probably puts his foot in it more.