Transform Your Car's Finish: Poppy's Patina Wipe-On Clear Coat DIY & Review | Before & After Results
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Welcome to my channel! In this video, I share my experience using Poppy's Patina Wipe-On Clear Coat to give my car a stunning finish. I'll walk you through the entire process, showing you how to apply the product effectively. You'll also get to see impressive before and after shots that highlight the difference this clear coat can make.
In this video, you will learn:
What Poppy's Patina Wipe-On Clear Coat is and its benefits.
Step-by-step application instructions.
Tips and tricks for achieving the best results.
A detailed comparison of the car’s appearance before and after the application.
Whether you're a car enthusiast or just looking for a simple way to enhance your vehicle's appearance, this video is for you. Don't forget to like, comment, and subscribe for more car care tips and product reviews!
Products Used:
Poppy's Patina Wipe-On Clear Coat
Superbe mais tres chere ce produit ... Superb but very expensive this product...
The areas of the hood that are white and flaky is the failed clearcoat. If you want it to look good you need to sand off the white flaky stuff and get down to the color coat (basecoat). When clearcoat fails it delaminates from the basecoat and makes that hazy, rough, flaky looking mess. Once you get past the clearcoat it will be a different color tone and dull. Then the product you used will look much better applied over the affected area.
Thank you so much.
Huge shout out to blake for that shirt!
Still one of my favorites.
I might have missed it but what was the temp when applied?
@@sms9106 a little warm. Around 90.
There was a lot of oxidized and failed clear coat that needed to be removed.
Yeah I definitely could have done more. I wanted to see what would happen if I just cleaned and applied. Still looks about 60% better but you are correct.
Hmmm, might have to try this on the wife's car. That thing needs it bad.
It does work well as long as you know what you are getting :)
This doesn’t actually work properly. It looks nice for a little while but then the underlying issue will break through and make it look like as it did.
I did my own plus my dads car, and it looked nice when I sprayed the Clearcoat after a sand, but after a month it looked like the underlying problem broke through and cracked the clear coat I had sprayed on.
The clear coat method will work if it’s not bubbly like the OPs video, where you can just see the paint, but when it’s like this, to get it to a good state, you have to repaint it in my opinion
I will keep you all posted.
There is another product that takes the thin layer of bad clear off. 😊
@@James-ik8yz what is that?
I think you needed to sand it properly first. Secondly you should've done the job properly to the end before you finish making the video. It's very annoying, what a waste of your time and our time. Cheers Graham