Your channel is a true hidden gem that needs to be shown to the world! Seriously, you helped me do my timing, and now you break down the tuning? You make the most scariest of tasks look easy!
Lucky enough to have been in this beast !! It accelerated so fast I got my breakfast again !! Well done Nick , a great example of what you guys can do 👏 . Mines is fast enough for me ......... Well for the time being !! 🤔😉😂🤙👍
Unreal video and EPIC numbers! just goes to how important the whole package is, love how you’ve done things a little differently too. lots of different options when it comes to hardware that don’t have to cost the earth. Keep it up lads! 💪
So after watching this while building my hybrid k04 (f23-t) bwa audi tt, i basically copied your boost curve etc, but with a limit of 1.5 bar due to keeping that stock map sensors, and ended up with 321 wheel hp/ 380bhp haha. Love your work brother. I need to get and learn winols, im using ECM titanium
Great watch just come across the channel after looking into replacing my timing chain and tensioner on my seat cupra. Hope you still upload good content.
Loved this, so much info given about the mysterious world of car tuning. Great information explaining what you tuners do. Unfortunately there's not a lot of vids explaining what is being done during a tuning session. Thanks buddy
Nice one, its a tad more then I thought but close, great build and that's one smooth graph. Next build Nick, get it done I want to see 500 on that CDL lump
Awesome vids especially the timing one I’ve just bought my own mk5 gti and did the chain first time with a cam bolt rounding off I’m sure mines got a dodgy injector or bad diverter it seems flat to me Over boosting at 20 imsure but only holds 10 only owned it a couple weeks now
Gotta do on rd video mate, ive really enjoyed the journey so far. 400 hp is legend.. as always mate had couple giggles as always with ya 😎😎👌👌👍👍✌✌ peace and respect frm the South
You could push it just a little bit further by setting 140 bar rail pressure. I see many tunes with RS4 FPRV do it. I'm soon gonna test it too. BTW you get above your specified pressure due to the good old pressure creep. So you're kinda implicitly @135bar. Wouldn't it be better to aim at like 5,0 bar LP and hold that steady to avoid HP rail pressure creep?
Yeah if I needed to push the tuning then I would explore more options. However this is a stock BWA motor so happy where it is. I have targeted 133bar HP at peak rpm , and Im only creeping slightly over that so happy with control of that also.
Hey Nick. Awesome video😊 Hope you will do a video running the car on the road, maybe with some accelration times (100-200 km/h) 😊 Just wondering which timing map your adjusting? On my mk5 GTI Edition 30 I have 3x KFZW maps and 3x KFZW2 maps. On the KFZW, map nr1 and nr3 have the same values but map nr2 not. Same case for the KFZW2. According to the software documentation KFZW is used when the camshaft is not active and KFZW2 is used when the camshaft is active…🤷🏻♂️ I am asking this since my car is pulling 2-3 deg. ignition at ~2750-4000 rpm (at 180 load). increase load results in even more ignition decrease…
Nice one Nick been waiting to see the result on this another top video with plenty of info given it's a shame your so far from me I've a few cars and vans that need a proper tuner. Now pull your finger out and get the white track car done 😂
Great tune I just subscribed to your channel.. Quick question I have the same set up but I have installed H-beam rods, stock pistons, and (RS3) injectors. Do you have a tune for that? If so how much HP could I gain?
Hi there, All of the tuning I do is custom to the setup, so there is no off the shelf tune for that. I can help with it if needed. Give me a shout @ nick@decimaltenths.co.uk
Hey guys great work 👍 I've recently changed my cam chain and tensioner but still getting "adjustment bank one" at 5.9%, there are no rattles and car rums perfect. Could the timing be a tooth out maybe or would that run rough?
Hey mate quick question. When you put on the CAI you capped that small hole on the inlet pipe to the turbo and now it has a pipe running to it. What’s the pipe now running to it? Love the build! Cheers.
Hey! It's for the diverter valve which is mounted in a different place on a k04. Originally the car had a k03hybrid so the doverter was on the turbo. The k04 has it mounted on the boost pipe before the throttle body and the link pipe.
Hey mate sick build 🔥 I’m currently running a k03 on my mk5 GTI do you have a link for a k04 turbo as I’m looking to upgrade but want to know so I know I’m buying the correct one, cheers mate
ending is lovely with compresor :P nice... anyway, I own ed30 mk5 with k04 turbo, currently on 327 brake hp on dyno... but I got flutter from turbo when I am on low boost /around 1500-2500 rpm and I then I drop foot from gas pedal... so I am solving right now, if it is harmless or not... what you think?
Chances are you are experiencing compressor surge which is very common on k04 TFSI's. When I tune these I stay out of the surge zone as it can cause damage over time. You can either remap or install an Anti surge core which is the BEST mod to a k04 turbo
@Decimal Tenths I'm based in Manchester. I have had the car 3 years now and like you paid 2.5k I've probably spent x10 that amount on the car buying all the bits. Having a bad Map put on the car from a. Company based here.. mis diagnosed issues and created more issues with brand new parts!! Currently running 300bhp and 300 ftlbs.. but the car was mapped with many issues.. which I've since tackled. But I'm currently at a point of.. 02 sensor fault.. brand new bosch one installed.. still same fault code.. runner flap won't adapt in vds so replaced motor but still won't adapt. Also brand new ko3 hybrid.. After tuning company was just guessing why it wasn't making power. Adjusted the actuator. And has caused the rattling noise. After researching. I know the two things I haven't got.. is a 3 bar map sensor and a 200 fuel rail sensor.. everything else I've pretty much replaced!
Great video, I'm currently about to have someone tune the GTI after a BT and clutch🤘 did you "break in" your clutch before the dyno? Also can't wait to see your mk5 out on a test drive
Man I love your content, I have an Audi A3 8p with BWA, need to rebuild and do some tuning on it. Will you be able to tune for me? I do have access to a dyno etc.
Are these figures of power at the wheel or approximated at the crank? I've had two MK5 GTI's and both made about 185bhp at the wheels pre tune and 235bhp afterwards, the K03 being the limiting factor.
@@DecimalTenths I should have finished the video before commenting…. Very interested in the ported K04 as opposed to a whole new aftermarket unit. Are you using a certain turbine/compressor wheel for it?
How does dyno tuning compare to an off the shelf K04 tune such as APR's? I'm doing a K04 upgrade on my MK5 in the next month or so, and I'm planning on using their file.. do you have any advice or recommendations, sir? Great MK5 videos man subscribing for more!
You will find that your car is fast no doubt. But it won't be optimal to your setup. You may be missing torque, or bhp in areas that a custom tune can deliver on. I personally am not a fan of off the shelf files. There is generally a compromise that custom tuning can get around. My advise is that anything stg2 onwards should be custom to the setup
@@DecimalTenths OK I see your point, I'm happy to trade off some power for potential reliability and engine safety.. if that's even a benefit of an off the shelf tune?
@@DecimalTenths Bud will you please address the thrust washer issue and if the required modifications with a 360 degree washer is really necessary or when is it necessary
can i use oil motor 0w20 for half hour as flushing with new filter,then coming back to original my oil motor 5w30? To avoid using chemical flushing products . Thanx
That’s impressive from a bwa engine lots of people slate them . I’ve heard the pistons are a higher compression then the cdl and the byd is that true ? You need some cdl cams MORE POWER lol
Suck build man 🔥 I’ve got a 2006 Golf MK5 GTI and I’m looking to go K04, Do you have a link for the K04 you got so I know I’m buying the right thing would be much appreciated 👊
@@DecimalTenths How much does a stock K04 Turbo cost do you have a link as I’ve got a K03 in my GTI I’m pretty sure it’s not an edition 30, but I’m looking to upgrade, cheers bro 🔥
is there any difference in valvesprings normal mk5 gti and mk5 gti edition30? I laterally rebuild my engine to brand new everything. So.. and with “high” boost the valves will float (is what they told me) i think its weird… they dropped the boost in bar so it wouldn’t float. Weird thing is that it only can push 330hp. With less then 400nm and less then 1.45bar boost. Its fine but.. before it had more then 340hp and over 430nm on the wheels. I dont get it if i see so many mk5 gti’s that are not even editions 30’s with same motors as s3 have (with few things different) with sush high numbers.. 😅 I have changed to Loba LO400 turbo instead of stock k04 turbo.. and stronger crankshafts ect.
Hey nick I have a 08 mk5 gti and my abs light is on. I've replaced all wheel speed sensors and the front ones were in bad shape, they had rust in them and were stuck in there pretty good. I was sure that new sensors would solve the problem but the abs light is still on. Any ideas?
Yes pal, A lot of the time it's the ABS ring which is corroded which is the problem. Part of the bearings so new bearings required as long as there's no wiring issues. All of them can be logged, and confirmed as faulty.
how do you understand how to write the tuning files so well is what blows me away the most , where is your workshop as I am interested in a stage 2 for my mk5 gti too
Although o the best setups, the anti surge core will do 400bhp. But most do 380bhp. The hybrid isn't a guaranteed route to 400bhp, but most do make over 400.
@@DecimalTenthsokay yeah fair… I’ve got a scirocco r stage 2+ so planning to hit around that 400 mark. Would you recommend lpfp ? Was looking at the rs3 one. Thanks
Hey hey! How did you get such massive numbers? I have a 2012 CDLF Golf R, what ballpark max HP can you get from a stock unopened engine with just fueling and mapping as you've done? Cheers mate!!!!
This car is only 1 of 2 that I've tuned and got over 400bhp. The other was on a mint 6R with Anti Surge core. It's not common to get these figures, and most k04 framed turbo cars make 360-380bhp on our dyno.
Legend yeah cool platforms! Hey not trying to be a pest, but could I flick you a datazap of my car currently? Shes surging and fluttering all through the low revs under power :*(@@DecimalTenths
hi , I was wondering if you could help me , my gti dog 2008 drives normal and changes gears as it should however when it comes to a standstill it stalls , the red battery light flashes on the dash and then I will need to restart again but drives fine and idles fine. Have you ever heard of this issue before or know what it might be ? thank you
Most probably something simple like the PCV valve which doesn't reset when moving to idle, but does when idling. Logging and testing will confirm though
@@DecimalTenths what exactly will I need to check the logs for and is there no chance of it being a gearbox issue , as it does change gears fine , the stalling also happens in manual mode, thank you soo much for the help
@@DecimalTenths understood I’ve run several BPY setups, I just wanted to get close to you’re setup on a base map then tweak from there. That’s by far the highest horsepower number I’ve ever seen an ea113 at! You know you’re stuff .
@@Quattrogame_pro a lot of ppl are now installing anti surge cores on their K04 now, it's the new fad. Most are hitting 400 or damn near to it now days
What do you think you could get out a 8p s3 facelift cdla with exhaust intake n intercooler bolt ons?and would it be ok getn a remap straight after a carbon clean and injector service thanks,ps would I'd be best getn a runner flap delete at same time ?
Hi dude, Sound like your at stg2 kind of level. S3s will typically do 330-350bhp, with similar torque levels. If you want the best then get a vis hpfp and rs4 return and it should then be 360+bhp. Yes tuning after a carbon clean and injector test is ideal and it's how we do it.
@@DecimalTenths yes I'm assuming it's been remapped with the milltek tb etc stage 2 but no paperwork but uz will tell me what's been done when I come down just needty get it booked in and have a day out from sunny glasgow lol thanks
Hey man I love your videos but I have a question on my GTI I got the new motor and trans put in but it won’t start it cranks but then it just smells like it’s flooded with fuel and I don’t know what to do and it just keeps making me frustrated if you have any knowledge on what to do I would be really grateful if you could help me
Plug in and read the codes, might just need the codes resetting before it will fire. After that it would be best to check everyrhijg has power, fuel pressure on low and high side.
Not really it's a specific tapered bolt, with a very shallow head as the variator oil control feed slides inside so space limitations are strict. Easy to I stall, maintain and remove.
We have dyno at 394 at 1,65 with revo stage3 hardware and software with K04 turbo direct sa.. Amazing..but 2 bar for bwa It Is soo mutch! No? 80% duty Amazing 😂
Where do you think the 400hp are coming from because as long as i'm into me TFSI tuning i didn't heard of a 400hp K04 for a single time unless it was a hybrid like a TTE420/TTE480 of course...
@@DecimalTenths Well, fair enough. Definitely an very impressive result. What i would love to see in your driving impression video (which im really looking forward to) would be a spool test. Camera on the speedometer, 4th Gear, 2000rpm and full throttle. Would be really interested to see when that K04 with that anti surge core starts to spool.
Your channel is a true hidden gem that needs to be shown to the world! Seriously, you helped me do my timing, and now you break down the tuning? You make the most scariest of tasks look easy!
Cheers!! Give e us a share to like minded people and I'd appreciate it greatly 🙏
Lucky enough to have been in this beast !! It accelerated so fast I got my breakfast again !! Well done Nick , a great example of what you guys can do 👏 . Mines is fast enough for me ......... Well for the time being !! 🤔😉😂🤙👍
Haha yes you are pal 👍🤣.
That was fun 👌. Appreciate the kind words 🙌
Unreal video and EPIC numbers! just goes to how important the whole package is, love how you’ve done things a little differently too. lots of different options when it comes to hardware that don’t have to cost the earth. Keep it up lads! 💪
Cheers Andrew, it has surprised me to be fair. Very happy with it 👌
Love these types of videos. So much information and knowledge 💪🏻
Appreciate it pal 👍
So after watching this while building my hybrid k04 (f23-t) bwa audi tt, i basically copied your boost curve etc, but with a limit of 1.5 bar due to keeping that stock map sensors, and ended up with 321 wheel hp/ 380bhp haha.
Love your work brother.
I need to get and learn winols, im using ECM titanium
Awesome pal 🙌 Great result.
I've never used ECM Titanium - Always Winols. Just shows it doesn't matter what you use dude, it's how you use it 👌
@DecimalTenths winols looks better for ecu, ECM titanium is really good for DSG mapping though
Just bought a GTI mrk 5 dsg .. came accriss thos channel an it's a goldmine of Info
Cheers!
Great watch just come across the channel after looking into replacing my timing chain and tensioner on my seat cupra. Hope you still upload good content.
Cheers. It's always the plan to continue but time is an issue for me atm. Videos will be coming soon though
Loved this, so much info given about the mysterious world of car tuning. Great information explaining what you tuners do. Unfortunately there's not a lot of vids explaining what is being done during a tuning session. Thanks buddy
Thankyou dude. Just doing what I do. No wizardry here... just trial and adjustment 👌
Nice one, its a tad more then I thought but close, great build and that's one smooth graph. Next build Nick, get it done I want to see 500 on that CDL lump
411 on a BWA! 😮 Be interesting to find out how long this lasts.
Yes!! If looked after I think it will last... but then I would say that 😝
Been waiting for this for too long!
The exhaust sounded good in that short clip
Absolutely amazing 👏 can't wait to fit my anti surge core to my Mk6R stage2+
Worth every penny pal.
Thanks for the insights on the tuning
Great video as always, congrats on the #s
👍
Awesome vids especially the timing one I’ve just bought my own mk5 gti and did the chain first time with a cam bolt rounding off I’m sure mines got a dodgy injector or bad diverter it seems flat to me
Over boosting at 20 imsure but only holds 10 only owned it a couple weeks now
400 h.p. in that lil go kart car is downright hairy !! Yea .I like it
Need more content of this car 🙌
Mate love what you do!! Great content hommie really educational and wanting to get mine done by you 100%
Cheers dude 😁
Hard to argue with numbers like that with no knock and linear power. 👍💪😎 Thanks so much for sharing man! What's next for it??
Road test and check, heated seats wiring install and then kick its #### in 🔥🤣
Greetings from the Netherlands! These are pretty much the best numbers ive seen lol. Ill probably book my own mk5 gti in with you guys
Greets!! Yes they are pretty immense! I don't normally see these numbers on our dyno. It's a great setup which just works 👌
Great video. Amazing numbers and brilliantly explained.
How does it handle that sort of power without an LSD?
Surprisingly well to be fair. It would be amazing with an LSD though 🙌
Cracking result there 🥳💪 going to be a blast on the road and track 😎
Yeah, cant wait 👌
Was looking forward to this, awesome results Nick! Really want to do something more with my own this year, considering going K03 Hybrid 👀
I prefer a full fat k04 to be honest.
Yes, go the k04 it's a weapon@@DecimalTenths
Hello nice work! can't wait for you to do the test drive 👍
Yeah should be fun 🤙
Congratulations! Awesome build bro!
Cheers 👌
Great update 👍
Road video will be fun
Cheers 👌
10 degrees ambient lol. Where I live in Australia ambient most days for the last 3 months has been low 30’s.
Haha mental. Sometimes I wish it was like that here...😬
@@DecimalTenths Not if you want to make good power 😆
Gotta do on rd video mate, ive really enjoyed the journey so far. 400 hp is legend.. as always mate had couple giggles as always with ya 😎😎👌👌👍👍✌✌ peace and respect frm the South
Cheers pal, Yeah I'll be doing it this week, soon as the rain stops...🤣
You could push it just a little bit further by setting 140 bar rail pressure. I see many tunes with RS4 FPRV do it. I'm soon gonna test it too.
BTW you get above your specified pressure due to the good old pressure creep. So you're kinda implicitly @135bar.
Wouldn't it be better to aim at like 5,0 bar LP and hold that steady to avoid HP rail pressure creep?
Yeah if I needed to push the tuning then I would explore more options. However this is a stock BWA motor so happy where it is.
I have targeted 133bar HP at peak rpm , and Im only creeping slightly over that so happy with control of that also.
@@DecimalTenths is it the 7+7 or the 6+6 blade core?
Awesome video Nick. Talking Alien to me but you obviously know what youre doing. Keep em coming. I must come for a visit in the BRM Turbo ;)
Please do pal 👍
Yes Nick!!! Your face says it all 😂👍
Class mate thankyou 🙏
That's some amazing results just crazy. Unbelievable. What engine management are you using?
It has the stock Bosch MED9 ECU 👌
Still a minefield for me. Great figures mate, can see how much goes into a custom tune. Road logging will be interesting, as on Blurple 😮
🙌
Hey Nick. Awesome video😊 Hope you will do a video running the car on the road, maybe with some accelration times (100-200 km/h) 😊
Just wondering which timing map your adjusting? On my mk5 GTI Edition 30 I have 3x KFZW maps and 3x KFZW2 maps.
On the KFZW, map nr1 and nr3 have the same values but map nr2 not. Same case for the KFZW2.
According to the software documentation KFZW is used when the camshaft is not active and KFZW2 is used when the camshaft is active…🤷🏻♂️
I am asking this since my car is pulling 2-3 deg. ignition at ~2750-4000 rpm (at 180 load). increase load results in even more ignition decrease…
Looking forward to another TFSI build. Will it be a complete build like you did with the stroker?
Weve got a hybrid build about to start. Doubt we will be touching internals yet though
New to your channel, really loving the nice in depth MK5 content 🤘🏼 Nice work!!!
Thankyou buddy 🙏
Keep up the builds. Love these
Will certainly be trying 🙏
Amazing work you did! 🔥 can’t wait to see you driving it 💯🔥💪🏼
🙌
My golf estate dsg tcu damage I oder a used tcu will I need to programe it in oder for it work ?
congrats mate!!! love the energy you give on your channel!! how big are the injectors??
Thankyou pal, stock k04 injectors 🔥
Nice one Nick been waiting to see the result on this another top video with plenty of info given it's a shame your so far from me I've a few cars and vans that need a proper tuner. Now pull your finger out and get the white track car done 😂
Much appreciated pal, I know I need to sort it out 🙈
Well done on 400bhp! This GTI must be a reaper on the tarmac.
Cheers!! Video coming 👌
Can’t have too many brews 😉👍🏻 keep up the good content!
Cheers, will do 👌
Awesome video and will help me with my MK5! Which tune are you using!
Which tune...?
great vid mate and what a result👊 you know people be ringing you up to do the same to theirs 🔥🔥🔥🔥
Cheers pal, they already do...😬.
@@DecimalTenths its a great set up mate and having a TT MK2 with a bwa its got me thinking 🤔
@Car Chris K04 will be the best thing you do in my opinion pal. I love em with the AS core.
Great tune I just subscribed to your channel.. Quick question I have the same set up but I have installed H-beam rods, stock pistons, and (RS3) injectors. Do you have a tune for that? If so how much HP could I gain?
Hi there,
All of the tuning I do is custom to the setup, so there is no off the shelf tune for that. I can help with it if needed.
Give me a shout @ nick@decimaltenths.co.uk
@@DecimalTenths okay is that your email? I want to make sure i do need your help asap!!
Awesome work lad!
Can we get a breakdown of all mods and what was ported?
Yes I'll be doing that soon 👍
Hey guys great work 👍 I've recently changed my cam chain and tensioner but still getting "adjustment bank one" at 5.9%, there are no rattles and car rums perfect. Could the timing be a tooth out maybe or would that run rough?
You looking at the right bit? Block 093-3?
If its that value at 091-2 then this normal.
@@DecimalTenths oh shit I'm looking at wrong part then haha, thanks for replying!
Great video,love the content 👏
Thankyou pal 🙌
Hey mate quick question. When you put on the CAI you capped that small hole on the inlet pipe to the turbo and now it has a pipe running to it. What’s the pipe now running to it? Love the build! Cheers.
Hey!
It's for the diverter valve which is mounted in a different place on a k04. Originally the car had a k03hybrid so the doverter was on the turbo. The k04 has it mounted on the boost pipe before the throttle body and the link pipe.
@@DecimalTenthslegend ty! Could not for the life of me figure it out haha. Cheers.
Hey mate sick build 🔥 I’m currently running a k03 on my mk5 GTI do you have a link for a k04 turbo as I’m looking to upgrade but want to know so I know I’m buying the correct one, cheers mate
Far better to buy a conversion kit. Get in touch with Danny Hill at Wigan VAG spares. He generally has them on the shelf.
ending is lovely with compresor :P nice... anyway, I own ed30 mk5 with k04 turbo, currently on 327 brake hp on dyno... but I got flutter from turbo when I am on low boost /around 1500-2500 rpm and I then I drop foot from gas pedal... so I am solving right now, if it is harmless or not... what you think?
Chances are you are experiencing compressor surge which is very common on k04 TFSI's.
When I tune these I stay out of the surge zone as it can cause damage over time.
You can either remap or install an Anti surge core which is the BEST mod to a k04 turbo
Making me jealous!! I've got thr exact same mods on mk5 gti and struggling to find a mapper to get it to this power level
Where are you dude? Some damn good TFSI tuners out there.
@Decimal Tenths I'm based in Manchester. I have had the car 3 years now and like you paid 2.5k I've probably spent x10 that amount on the car buying all the bits. Having a bad Map put on the car from a. Company based here.. mis diagnosed issues and created more issues with brand new parts!! Currently running 300bhp and 300 ftlbs.. but the car was mapped with many issues.. which I've since tackled. But I'm currently at a point of.. 02 sensor fault.. brand new bosch one installed.. still same fault code.. runner flap won't adapt in vds so replaced motor but still won't adapt. Also brand new ko3 hybrid.. After tuning company was just guessing why it wasn't making power. Adjusted the actuator. And has caused the rattling noise. After researching. I know the two things I haven't got.. is a 3 bar map sensor and a 200 fuel rail sensor.. everything else I've pretty much replaced!
Great video, I'm currently about to have someone tune the GTI after a BT and clutch🤘 did you "break in" your clutch before the dyno? Also can't wait to see your mk5 out on a test drive
Yes 250 miles, lots of clutch action, no major stress
@@DecimalTenths Thanks!
Man I love your content, I have an Audi A3 8p with BWA, need to rebuild and do some tuning on it. Will you be able to tune for me? I do have access to a dyno etc.
Cheers! Yeah 👍 👍
Stock LPFP holding 5 bar? That is very good. Any mods? Grounding mod?
Yes it is! No mods, just some extra duty in the map. No grounding mod on this.
@@DecimalTenths which pwm controller revision? The one with metal base?
I wonder if my blue rev C module can hold 80-90%.
Woah. Fantastic numbers on a ko4!! Was that a standard ko4 or a hybrid. Either way we’ll done!
It is a ported K04 housing, with an Anti Surge core and Forge Actuator.
Are these figures of power at the wheel or approximated at the crank? I've had two MK5 GTI's and both made about 185bhp at the wheels pre tune and 235bhp afterwards, the K03 being the limiting factor.
In the video I give measured wheel power and also measured crank power. We don't estimate power figures wheel vs engine.
@@DecimalTenths I should have finished the video before commenting…. Very interested in the ported K04 as opposed to a whole new aftermarket unit. Are you using a certain turbine/compressor wheel for it?
How does dyno tuning compare to an off the shelf K04 tune such as APR's? I'm doing a K04 upgrade on my MK5 in the next month or so, and I'm planning on using their file.. do you have any advice or recommendations, sir? Great MK5 videos man subscribing for more!
You will find that your car is fast no doubt. But it won't be optimal to your setup. You may be missing torque, or bhp in areas that a custom tune can deliver on. I personally am not a fan of off the shelf files. There is generally a compromise that custom tuning can get around. My advise is that anything stg2 onwards should be custom to the setup
@@DecimalTenths OK I see your point, I'm happy to trade off some power for potential reliability and engine safety.. if that's even a benefit of an off the shelf tune?
Impressive results man! What is the name of the tuning software you are using?
Cheers, I use Winols to modify, Autotuner to Flash, VCDS to log and Dieselpower to view Logs 👍
@@DecimalTenths Bud will you please address the thrust washer issue and if the required modifications with a 360 degree washer is really necessary or when is it necessary
Wow, this on a stock engine and upgraded bolt ons? 😮👌
Yeah, and still going 💪
@@DecimalTenths that's awesome dude. If one was to bring a mk5 gti into you, what would the charge me for a package like this? Thanks again pal
Any updates post dyno? Hows it on the road?
can i use oil motor 0w20 for half hour as flushing with new filter,then coming back to original my oil motor 5w30?
To avoid using chemical flushing products .
Thanx
You can. I wouldnt bother though. Use 5w-40 everytime.
@@DecimalTenths
Thank you for your reply,so there is no damage with this way
When you say the turbo is ported, do you mean the exhaust manifold?
Yes the hotside and manifold were ported.
Looking forward to more videos 😊mate
👍
That’s impressive from a bwa engine lots of people slate them . I’ve heard the pistons are a higher compression then the cdl and the byd is that true ? You need some cdl cams MORE POWER lol
Haha I know, on the edge of what the BWA can take I think 🙈
Suck build man 🔥 I’ve got a 2006 Golf MK5 GTI and I’m looking to go K04, Do you have a link for the K04 you got so I know I’m buying the right thing would be much appreciated 👊
Cheers man.
Yeah the k04 turbo is a stock turbo, but you rebuild it with this core and actuator
decimaltenths.co.uk/product/157837/
@@DecimalTenths How much does a stock K04 Turbo cost do you have a link as I’ve got a K03 in my GTI I’m pretty sure it’s not an edition 30, but I’m looking to upgrade, cheers bro 🔥
Keep up the good work 👏 👌
🙏👍👍
is there any difference in valvesprings normal mk5 gti and mk5 gti edition30?
I laterally rebuild my engine to brand new everything. So.. and with “high” boost the valves will float (is what they told me) i think its weird… they dropped the boost in bar so it wouldn’t float.
Weird thing is that it only can push 330hp. With less then 400nm and less then 1.45bar boost. Its fine but.. before it had more then 340hp and over 430nm on the wheels.
I dont get it if i see so many mk5 gti’s that are not even editions 30’s with same motors as s3 have (with few things different) with sush high numbers.. 😅
I have changed to Loba LO400 turbo instead of stock k04 turbo.. and stronger crankshafts ect.
Thats decided, my AWD CDL Ibiza will be coming to you for tuning! How's best to get in touch with you to discuss?
🙌 👌 -->
0191 366 1430
Or
Facebook : Decimal Tenths
Or
Enquiries@decimaltenths.co.uk
Hey nick I have a 08 mk5 gti and my abs light is on. I've replaced all wheel speed sensors and the front ones were in bad shape, they had rust in them and were stuck in there pretty good. I was sure that new sensors would solve the problem but the abs light is still on. Any ideas?
Yes pal,
A lot of the time it's the ABS ring which is corroded which is the problem. Part of the bearings so new bearings required as long as there's no wiring issues.
All of them can be logged, and confirmed as faulty.
Smooth as a 👶 bum! We are waiting for test rides! When!?
This week 😁
how do you understand how to write the tuning files so well is what blows me away the most , where is your workshop as I am interested in a stage 2 for my mk5 gti too
LOTS of practice dude. We're in Newcastle NE21 5SA 👍
@@DecimalTenths ahh man I wish you guys were closer I’m in London , do you offer online file tuning ?
A forged bwa 2.0tfsi engine with k04-64 turbo what can i expect in the dyno?
If all mods are good and it is stg2+ with a hpfp then typically 360-380bhp
Is it worth buying the hybrid you sell or the anti surge core? What can I roughly push with the anti surge core you sell on your site?
Although o the best setups, the anti surge core will do 400bhp. But most do 380bhp. The hybrid isn't a guaranteed route to 400bhp, but most do make over 400.
@@DecimalTenthsokay yeah fair… I’ve got a scirocco r stage 2+ so planning to hit around that 400 mark. Would you recommend lpfp ? Was looking at the rs3 one. Thanks
What hardware and software do you use to read/flash these ECU's? Have no luck finding anything not ridiculously expensive
I use ridiculously expensive stuff to be fair...🙈🤣. Its cheap considering the use it gets and the revenue it generates
Hey hey! How did you get such massive numbers? I have a 2012 CDLF Golf R, what ballpark max HP can you get from a stock unopened engine with just fueling and mapping as you've done? Cheers mate!!!!
This car is only 1 of 2 that I've tuned and got over 400bhp. The other was on a mint 6R with Anti Surge core. It's not common to get these figures, and most k04 framed turbo cars make 360-380bhp on our dyno.
Legend yeah cool platforms! Hey not trying to be a pest, but could I flick you a datazap of my car currently? Shes surging and fluttering all through the low revs under power :*(@@DecimalTenths
@BookandRegan Yeah if you want ping it over to nick@decimaltenths.co.uk
I have the same engine BWA. I’m having misfire cylinder 3 code P30303 but I changed the plugs and coil pack. Could it be the fuel filter? Thanks
Most probably not. Although it can all be logged and diagnosed 👍
@@DecimalTenths or a wiring fault as my battery died the night before and my connection to cylinder 3 looks abit dodgy
Nick can you ko4 the 1.8t bfb engine that’s longitudinal mounted in the a4 b6 avant? Or is there a better option? Thanks pal
I'd imagine you could pal. Although I don't have direct experience of the space limitations etc so couldn't confirm pal.
Thanks nick 👌🏻 golf’s a beast mate 👍🏻
hi , I was wondering if you could help me , my gti dog 2008 drives normal and changes gears as it should however when it comes to a standstill it stalls , the red battery light flashes on the dash and then I will need to restart again but drives fine and idles fine. Have you ever heard of this issue before or know what it might be ? thank you
Most probably something simple like the PCV valve which doesn't reset when moving to idle, but does when idling. Logging and testing will confirm though
@@DecimalTenths what exactly will I need to check the logs for and is there no chance of it being a gearbox issue , as it does change gears fine , the stalling also happens in manual mode, thank you soo much for the help
Hey would you sell this file? I wanna download it for my 8j TT bpy k04 similar setip
Not a good idea pal, this is custom tuned to the setup, so would need work to be optimal on another setup.
@@DecimalTenths understood I’ve run several BPY setups, I just wanted to get close to you’re setup on a base map then tweak from there. That’s by far the highest horsepower number I’ve ever seen an ea113 at! You know you’re stuff .
@@Quattrogame_pro a lot of ppl are now installing anti surge cores on their K04 now, it's the new fad. Most are hitting 400 or damn near to it now days
Great work👌👌👌
Thanks 🙌
Hi Nick. I don't see anything about tuning on your website, what would be the price for a stage 2+ remap on a Leon cupra r cdl engine?
Hi pal,
That's because our website is crap atm. We're working on it as we speak!!
Give us a shout
0191 366 1430
Enquiries@decimaltenths.co.uk
👍
What do you think you could get out a 8p s3 facelift cdla with exhaust intake n intercooler bolt ons?and would it be ok getn a remap straight after a carbon clean and injector service thanks,ps would I'd be best getn a runner flap delete at same time ?
Hi dude,
Sound like your at stg2 kind of level. S3s will typically do 330-350bhp, with similar torque levels. If you want the best then get a vis hpfp and rs4 return and it should then be 360+bhp.
Yes tuning after a carbon clean and injector test is ideal and it's how we do it.
@@DecimalTenths yes I'm assuming it's been remapped with the milltek tb etc stage 2 but no paperwork but uz will tell me what's been done when I come down just needty get it booked in and have a day out from sunny glasgow lol thanks
@@Shera_1977 Do it 👍👍
❤❤❤❤ WOW that's pretty awesome dude
It is pal thanks 👍
Love it bro
Cheers 👌
Hi Nick i'm wanting to go anti surge core and forge actuator like you, what psi colour spring would you recommend i go for on the actuator?
Hey pal,
Stock spring setting - yellow
@@DecimalTenths Thanks Nick. When i get it all up and running i'll be coming to you guys for a remap
would a mk5 golf gti uprated intercooler fit a 2.0 TT tfi 2007 car ?
I read the S3 stock intercooler is bigger than the mk6 Gti.
Mint 👍
do you have a price for remapping on your website mk5 golf gti like yours aiming for the 350+ bhp mark got all mods for stage2+ map
Hi pal,
We're busy building a new site so the current one isn't updated.
For Mk5 GTI stg2+ tuning we charge £550
Hey man I love your videos but I have a question on my GTI I got the new motor and trans put in but it won’t start it cranks but then it just smells like it’s flooded with fuel and I don’t know what to do and it just keeps making me frustrated if you have any knowledge on what to do I would be really grateful if you could help me
Plug in and read the codes, might just need the codes resetting before it will fire. After that it would be best to check everyrhijg has power, fuel pressure on low and high side.
@@DecimalTenths thank you. how would i check the fuel pressure and do you know where i can pick up a code reader
Which alloys are you mounting for all that power? Mine is similar with a k04 but with 17 it’s unmanageable
I run 18x8 BBS CH's 👍
@@DecimalTenths Ty 🙏
Good day lad can I use the same method to tune my VW Mk5 2.0 8v bhy engine non turbo
All tuning is log and adjust so yes it is how I would do it 😁
@@DecimalTenths awesome thanks alot wish I could be as good as you one day I love your channel oneday
Could the polydrive be swapped for a normal hex bolt?
Not really it's a specific tapered bolt, with a very shallow head as the variator oil control feed slides inside so space limitations are strict. Easy to I stall, maintain and remove.
I need a link to an s3 intercooler upgrade for the mkv fsi please or recommendation for intercooler on fsi mkv
We have dyno at 394 at 1,65 with revo stage3 hardware and software with K04 turbo direct sa.. Amazing..but 2 bar for bwa It Is soo mutch! No? 80% duty Amazing 😂
Yes 2 bar far too much in my opinion. This is pushed to 1.8 bar peak. 80% duty at high rpm to keep the wg shut
@@DecimalTenths we run at 1,65 at boost gauge 478 nm 394 hp k04 by Turbo direct SA It Is Amazing
how much max psi can a k04 hybrid chra support?
Can you do a mk 5 R32? I would love to see that!
Iam coming down there very soob😀
Mint 👍
Where do you think the 400hp are coming from because as long as i'm into me TFSI tuning i didn't heard of a 400hp K04 for a single time unless it was a hybrid like a TTE420/TTE480 of course...
Oh well in that case we might as well not bother if as long as you've been into TFSI tuning it's never happened...
@@DecimalTenths Were you upset from my comment or something?
@No Name Not at all. The answer is in the video. This turbo and setups ability to flow more air and not be held back by surge is why it can deliver.
@@DecimalTenths Well, fair enough. Definitely an very impressive result.
What i would love to see in your driving impression video (which im really looking forward to) would be a spool test. Camera on the speedometer, 4th Gear, 2000rpm and full throttle. Would be really interested to see when that K04 with that anti surge core starts to spool.
Stock low pressure fuel pump with,RS4 fuel controller?
Nah no need for it.