nah nigga calibrate your damn settings also layer height and nozzle size changes it moslty. okay for nominal not over-extrusion use z gap height 0.2-0.35, xy separation 0.9 or %80 also use interfacing supporting nearly 3 layer enough
The support removal was really clean ….. you should totally do a video on tuning supports …. All About z gaps types of support interface and density etc. Why do people claim z gap has to me a multiple of z height yet there is a difference in support removal even when you don’t use a Z height multiple
Let's act that nobody saw that the part split in the middle... Jokes aside, silk filament does have really shit material properties for it looking so good
I have one Bambu P1s and one FLSun S1, When I need to print complex multi-color models, I fire up my P1S. When I'm printing larger models like helmets, I usually use the S1. I absolutely love them .
Yeah the bottom line is that multicolour prints on a system like this are very wasteful. It's definitely something that needs to be talked about more, and more ways to mitigate it are possible too like purging to infill
I don't know why. I thought you were building the fan ducts, that blow on the bed of a Voron printer. I was wondering why you would choose rainbow for that but I was wrong. It was a poop slide
It would be more helpful to show how to minimize that poop in the first place! There should be some settings to cut that poop down to one tenth of that amount.
why dont people remove the plate from the bed, then the print from the plate? they all want to pull it from the build surface. why put more unneeded stress on the printer....drives me batty
@@3dPrintsAndLeaves I'm wondering how much of a moron you'll think I am when I tell you that mounts for the tools on my printing rack, as well as gridfinity bases are some of the very first things I printed. Sometimes the scaffolding looks easier to remove than it is, and I'm too excited to grab clippers.
In those 9 hours you could spend 30 seconds putting an already made plastic container or cardboard box behind it instead, and then proceed to print multiple prints without the time loss, mechanical wear, and filament cost. Wrong tool for this job IMO. Too many people buying printers and going “what do I print so I can constantly occupy this machine?” Instead of the other way around, a tool for a need or hobby support. One day there’s going to be ironically a fuck load of useless benchy boats in the actual ocean
@@BigfootPrintingI could definitely see this being functional, especially if access to the back of the printer is limited. Also, the actual impact of plastic waste from home 3D printing is likely insignificant vs manufacturing and electronics and single use plastic waste. Not ideal, but the actual impact is likely negligible by comparison.
I wish I could get supports to come off that easily and cleanly.Good job.
Bambu lab offers support interface filaments
Use organic supports, they come off even easier every time and they use less filiment and take less time.
nah nigga calibrate your damn settings also layer height and nozzle size changes it moslty. okay for nominal not over-extrusion use z gap height 0.2-0.35, xy separation 0.9 or %80 also use interfacing supporting nearly 3 layer enough
@@xtrfy1439 That would assume that I had a multifilament 3d printer which I don't. Still, good to know.
@@TDPEquinox I use tree supports which I think is the same as organic supports and they work okay most of the time.
The support removal was really clean ….. you should totally do a video on tuning supports …. All About z gaps types of support interface and density etc. Why do people claim z gap has to me a multiple of z height yet there is a difference in support removal even when you don’t use a Z height multiple
Not a bad idea! I think it rounds z height...I need to look into it
Let's act that nobody saw that the part split in the middle... Jokes aside, silk filament does have really shit material properties for it looking so good
Yeah lol
@@LostInTech3D To be fair:
That build doesn't need to be sturdy anyways, i'm sure it serves it's purpose just fine.
Bro I didn’t notice that why’d you have to ruin it for me 😭😭😭 jk lol
I have one Bambu P1s and one FLSun S1, When I need to print complex multi-color models, I fire up my P1S. When I'm printing larger models like helmets, I usually use the S1. I absolutely love them .
Breaks the print… still uses it anyways because it’s too much to print another one. 😅
WORKS FINE 😄
Poop shoot!!
I think the most satisfying thing about this video was that part that looked like a table at the beginning that he ripped off looked soooooo smooth.
The rainbow color sure fits the bamboo well :)
I think I moaned when I saw how easily those supports detached.
that was a satisfying support removal, may i ask what settings you use for that? mine always stick and scar the print really bad
Bambu slicer /orca slicer tree auto
I expected better quality of a 9 hour print on the Bambu.
i too, i see a lot of lines across the Z, this is the normal quality of bambu´s? i was to buy one + ams, but now i am very disapointed...
Not the printer but the fillament, silk is not as strong as other fillaments
No no wait! There must have been a pot full of gold at the end of the rainbow!
Nice print.
A rainbow poop shoot how apropriate.
😬
That has to be a rite of passage for new owners of bambulabs printers, right?
Wtf what sliced do you use!!! Those supports are CLEAN
I know right? That was just bambu slicer defaults. Can't explain it either.
Rainbow poop shoot has got to be a double-entendre 😂😂😂
just got the p1s, how do I get that model?
didn't I link it in the description? There's probably better models by now, look on printables
Is called the poop chute I have the exact same printer
What do you do with all of that poop waste? Is it a waste of material or is it worth having multi color prints to waste some material?
Yeah the bottom line is that multicolour prints on a system like this are very wasteful. It's definitely something that needs to be talked about more, and more ways to mitigate it are possible too like purging to infill
I don't know why. I thought you were building the fan ducts, that blow on the bed of a Voron printer. I was wondering why you would choose rainbow for that but I was wrong. It was a poop slide
aint printing much..or dumping lots..enjoy.good print..
Before you even took it off , I could right away see it was a poop chute
Oooohhhh, i thought it was a boat
Dude that support density had to be close to 80% or something that’s crazy
Nope! Just for some reason a really dense interface
It would be more helpful to show how to minimize that poop in the first place!
There should be some settings to cut that poop down to one tenth of that amount.
Yeah the setting called "don't print in colour" 😂 I'm afraid this kind of system is just fundamentally wasteful
You can probably print this right-side up so that no supports are needed.
UGH ALL THOSE LITTLE SUPPORT TREES!!! MUST DESTROY!! 😨😖😵💫😵
Look like a poop shoot for unicorns
This doesn't look like a Sony ps1 capable of playing metal gear solid and resident evil
Is this in reference of that one guy absolutely decking out his ps1
Wow...9 hours with supports?! It takes my Ender V3 Pro 24 hours to print that size. 😅
I KNEW IT
Only 9 hours?
It’s a fast printer.
Technically everyone it's an asgardian poop chute
When you put your finger oil on that PEI sheet I almost (sheet) my pants lol 🤣
it's fine, I'll wipe it off with some vegetable oil later
why dont people remove the plate from the bed, then the print from the plate? they all want to pull it from the build surface. why put more unneeded stress on the printer....drives me batty
Rainbowpoop...wait...You have a UNICORN???
💥
That poop collector
Too cool
Do you use just a default setting for those supports!? They came off so easily for the size and surface it covered
I think it was "tree(auto)"
what printer is this? It prints almost as good as my Ender 3
😏
Lol. Have to agree, the colors are awesome but the print quality is a bit meh.
ITS THE POOP CHUTE!
What kind of filament?
😂😂😂😂😂 Amazing!
How is the new bed?
can't fault it!
A Bambu toilet🤣🤣
panda gotta poop...
Poop shoot?
How many filament colors is this?
Just the one
Share The link please
new youtube rules - no links in shorts. sorry!
How did it take 9 hours? Seems very long for a simple print. And it’s mostly hollow ?
He printed it on an Ender and just put the build plate in the Bamboo for sponsor air time
not printed on this printer. Can see it on the collors in the ams
Every 3d printing TH-camr on their way to buy a Bambu printer. EVERY FUCKING CHANNEL
🤔
how dare these youtubers buy machines they like!!!!
So.... A poop pride slide?
A Baboon Labs Rainbow Poop Chute!!
So many layer lines. How do you fix that? Or is it normal?
That's nornal
When will you release the Neptune 4 review?
ummmm I gotta do some elegoo resin stuff, idk which I will do first, but yeah those are both next on the list
@@LostInTech3D can't wait! Pre ordered my N4 and it looks amazing!
oh yeah, from using it so far, it seems pretty solid
Печать ради печати уважуха😂😂😂
❤😮Sorry what adhesive do you use? Sticking these lathe models is so difficult
zero adhesive! Just make sure when printing on a PEI bed that your bed temp is 60C or higher.
I think just the PEI plate, I have never used adhesive on my PEI plate.
@@josefpfingstl61neither do I, I mean is the PEI selling point.
Don't take this the wrong way but . . . .
Nice poop chute!
Link in description yet no link....
huh? This is in the description:
Buy a P1S: lostintech.co.uk/P1S (affiliate)
Model link: www.printables.com/model/475487-bambu-lab-poop-slider
What are your print settings for the supports?
tree auto I think?? I was surprised how easily they came off
@@LostInTech3D what is the z support value
Off a first glance it looks like an air duct, alas... it's a mierda duct.
Edit: I realize it's a chute* in this configuration
A crapp3r?
What filament is that?
Time to throw the bin in the bin
That's a whole lot of poop lmao
It’s a poop shoot
Oh, a rainbow crap chute! Also bravely removing supports with bare hands 💪
I end up with blood on a model weekly from this
@@davetriesthis Well, unless you like it, get yourself a pair of needle nose pliers and walk away uninjured :)
@@3dPrintsAndLeaves the ridiculous thing is I have like a dozen pair of them. And clippers.
@@davetriesthis Ok, I forgot to recommend you to actually use them :) Print a mount for them to hang near the printer... or a dozen mounts!
@@3dPrintsAndLeaves I'm wondering how much of a moron you'll think I am when I tell you that mounts for the tools on my printing rack, as well as gridfinity bases are some of the very first things I printed.
Sometimes the scaffolding looks easier to remove than it is, and I'm too excited to grab clippers.
Does it really poop that fast??? Haha
No, I was testing it from the poop hole inside the machine 🤣
@@LostInTech3D okay I was just thinking I k know it's fast... But that's wayyy too fast
Slo-mo shot
P1S??
yes P1S
Poop bucket😊
Poop shoot
Definitely a poop shoot (chute)
Poop chute
I saw that one when I was looking to print no own. Instantly recognized it
In those 9 hours you could spend 30 seconds putting an already made plastic container or cardboard box behind it instead, and then proceed to print multiple prints without the time loss, mechanical wear, and filament cost. Wrong tool for this job IMO. Too many people buying printers and going “what do I print so I can constantly occupy this machine?” Instead of the other way around, a tool for a need or hobby support. One day there’s going to be ironically a fuck load of useless benchy boats in the actual ocean
don't begrudge me my rainbow poop slide.
@@LostInTech3D I would never lmao. If it works for you then great. I’m just a function over form guy, with a sprinkle of not-so-serious hater
whatever you do, don't look up ivan miranda.
@@LostInTech3D I love Ivan :) well I don’t dislike anyone. Or I wouldn’t be subbed to you guys :)
@@BigfootPrintingI could definitely see this being functional, especially if access to the back of the printer is limited. Also, the actual impact of plastic waste from home 3D printing is likely insignificant vs manufacturing and electronics and single use plastic waste. Not ideal, but the actual impact is likely negligible by comparison.
🏳️🌈 ? 🤔
hard to put out before do do anything more ?????????????????????
A poop chute!
Poop shoot
Poop chute
poop _slide_ :)
Poop shoot