I recently bought an A1 over the summer and have been printing non stop. Thank you so much for your videos. They have definitely helped me in my research and progress in this hobby. It has gotten to the point where I have even been able to patent a design I made and be in conversations with a company to make it more viable for buyers!
One thing you didn't touch on is the toolless hot-swappable nozzle on the A1. It's such an amazing feature to swap the stock 0.4 mm nozzle to a 0.6 mm for big prints or even a 0.2 mm nozzle for miniatures or high-detail prints. It's such an amazing feature and it really makes the A1 an excellent choice for someone getting their first printer. Also, the A1 is a lot less noisy in my experience.
this is really helpful. I have the X1C and don't need another enclosure one, or AMS. My only concern about the A1 is the footprint needed for the bed moving around.
Bought the A1 Combo a few weeks ago after watching some of your videos and it's been a blast. I'm a teacher and I've been printing mini lightsabers as prizes for my students, along with a bunch of different toys for my children.
You sound like the type of teacher that we need to make a positive example of. Engaging and actively rewarding students were always the teachers that held the most attention when I was in school.
We got the X1C on your recommendation and we loved it so much we got a second one. We've had them now for over a year, they're both still amazing. The AMS is a great addition to it, and we especially like the AI detection. Prints don't fail often (99% of the time it's adhesion issues because we didn't clean and prep the plate properly) and it has detected it every single time, saving us time and filament. We ended up getting a textured PEI plate for them, which I'd also highly recommend. Overall, I couldn't be happier with it and will happily recommend it. It looks intimidating, but I was a complete noob with 3D printing, and your videos + the instructions inside had it up and running the first benchy in under 10 minutes.
i hate that i paid 699 plus taxes /shipping so like 796 when it first came out and now the p1s is 599 but under 700 shipped lol. those A holes! They should give us vouchers to get a enclosure for paying that much more for the p1p.
Something I recommend touching on for the A1...the "Eddy Sensors" in the Nozzle (Active Flow Rate Compensation). A feature not present in the others, excluding the X1 (Lidar). This dramatically helps prevent flow rate issues, especially for those who are not used to fine tune calibrating their filaments!
The P1S is the best purchase I've ever made. It completely renewed my passion for 3D printing, my old CR-10 mini was great but I started having so many issues it turned me off 3D printing and I stopped using it. Since I got the P1S in may it's been going almost 24/7. 6 helmets, some 4 foot tall weapons, things I've sold, countless other stuff. And Its making my first full armor on it a breeze.
@@fajarkoolhaas2101 ya I've printed 7 helmets now. Some helmets can be done in 1 piece depending on the size (spiderman, deadpool, power rangers) other larger helmets can be cut up to fit
A1 is probably the best entry level. 98% of my prints were successful. My failed prints were completely my fault. (Had the filament set to pla instead of petg on the ams, if you know you know) overall an awesome printer. I can't wait for my next one. The addiction begins. 😅
So i went Straight to the X1C w/ams as my first printer, with no real knowledge of 3D printing. (It is overkill at the moment for me, ngl) Fast forward a few months(with lots of teaching from friends), and I don't regret it! I can count my failed prints on one hand. I'm still branching out from PLA & exploring other materials, but nothing truly exotic that the printer is designed towards, yet. I do have future plans to print more exotic materials, while my main use is more aligned with yours. Now that I'm planning for a 2nd printer in the distant future, this video does have me thinking of the p1s! Great Video as always!
I love my P1S! Definitely my most precious tool in my house and can't wait to get more like the A1 mini next. Just to have something actually at my desk and prototype small parts like I used to. The P1S is just too big for that but each printer has its use cases. The P1S can deliver quality, desired materials some printers can't do, and multi-material printing. The A1 mini is perfectly suited for any beginner without the AMS lite and compact. Bambu Lab really has done a nice job with their products, software, and ecosystem of parts. Highly recommend to anyone interested in their printers.
Thank you for all your videos and honest reviews. I'm finally taking the plunge and getting my first 3d printer and excited to do so. Been weighing my options and your videos have been extremely helpful. While I'm very hands on with being able to build/tinker with things (i.e. android over iphone, build my own pc, etc.), I think I'm heavily leaning now toward the Bambu Lab brand. Now, just need to decided between the A1 Combo or P1P... I know I have a long way to go and lot to learn (feel like my feet are just in the kiddy pool at this point), but am hoping to be able to print a large range of things from RPG mini's and terrain pieces to larger scale works like masks, gadgets/tools, and decorations. Speed isn't too big of a deal for me at this time as these will be more for personal projects and won't need to worry about quantity over quality, but not sure if the P1P would offer that smidgen of better quality (especially with smaller projects like the minis and 0.2 mm prints) and more room to grow with more filament options in the future.
I think this message comes too late, but I want to congratulate you. Frankly, I like your videos. They are detailed and easy to understand, and you help many people with them. Thank you. The problem with the discoloration of the A1 could be caused by a change in speed. At higher speeds, the filament receives less cooling than the parts printed at slower speeds. We can't always control the printing speed, and sometimes I have problems with discoloration or color changes on overhangs or near corners.
Started with an ender, then went to a v400 for better print speed, as well as a larger print size, but ran into a few different issues such as hitting prints off the bed and other issues causing quite a few failed prints. Finally i decided i wanted to get a bambu printer, ended up going with the x1 carbon, and it has been fantastic. Its ease of use makes the hobby really enjoyable. I agree about the price, but i have had the printer a few times detect spaghetti and stop the print, and also enjoy the touch screen. I didnt really want to get 2 p1s, just wanted one that worked perfectly. (Maybe would get another if they make a printer with a bigger bed) Overall great printer and company, and the bambu handy app is fantastic allowing me to print from my phone without even having to slice everything. Highly recommend to anyone who is on the fence with which printer to get.
Do yourself a favor and get your self the P1S. I’m about to finish my 4th MM Power Ranger helmet (along with some other random prints) and each one comes out better than the last the more I learn about printer settings and post processing. I’m so glad I finally took that dive into this hobby and I’m very happy with how far I’ve come. Special thanks to you Frank for helping me get into this and for all the tips and tricks! You’re a huge inspiration! Love the videos :)
Hi awesome videos I have an A1 and one day hope to have a channel like yours! I’m 7 and just started a few months ago when my dad bought me a 3d printer!
I am a huge fan of Bambu Lab and their printers, but I have not had good experiences with their silk PLAs. I have had the exact same rough texture on the exterior walls that you had on your A1 print (I think I also saw it a little on your X1C print on the right jaw bone). I also noticed that their silk stuck WAY more to the hologram plates I was printing on with a bed temp of 65c compared to every other brand of silk filament I have. For that matter their silk sticks to the hologram plates so badly I have to scrub it off with a blue sponge and dish soap with some elbow grease, and I don't have that issue with ANY other filament regardless of type of vendor. My conclusion is they have modified their silk PLA formula so that it will print faster overall and also not require slowing down the outer walls to say 50mm/s to get a shiny exterior. I wasted about a 1/3rd of their silk blue PLA trying to print a Tron bike with it before I threw in the towel and bought a 3rd party roll of blue silk which gave me 0 issues. The only thing I think could try next is to try the roll because maybe the additives they added absorbed water, but currently I avoid their silk PLA like the plague for the very issue you showed. I love all of their other filaments, especially their high speed PLA and translucent PETG.
My first printer was an Elegoo Neptune 4 Max. Which is definitely a Problem Child, but I got it at a great deal during the Labor Day sale, and I wanted something that prints REAL BIG. When it works, it's great, when it doesn't, it's frustrating, but I think it's been a good opportunity for me. As my first printer it has made me actually LEARN more about how to adjust and tweak settings etc. And its shown me that I DO like this hobby, even when it causes problems. That said, I have been seriously considering grabbing a P1S as a second printer just for something nicer to handle and do more consistent printing without needing to tweak and adjust settings constantly. I just REALLY wish that Bambu made something with a bigger build area. I wanna print REAL BIG! Maybe someday soon.
It's funny, I've had the same experience with my Neptune 4. A lot of tweaking, etc., but so much valuable knowlege about 3D printing that I would've missed out on by getting a printer that just worked out of the box. I acually enjoyed the failure and the tinkering just as much as every good print. Now it's working perfectly I would say 80 percent of the time and I absolutely love it! I was thinking about getting a P1S but I couldn't bring myself abandoning my lovely Neptune 4 :) Maybe on Black Friday there'll be a good deal on the combo... I'll probably get it then but I'll alway keep my Neptune 4 ;)
@@thedarkness37 Not necessarily any downsides I would say, the only thing is it's a bedslinger so it's a bit louder and lower quality, but I do highly recommend the A1.
@@peap1610I have an A1 mini and a p1p. Outside of build volume, they’re basically the same. There’s really no point in buying a p1p anymore, as the a1 does everything but is way cheaper
I just upgraded from an Ender 3 Pro to the P1S (non-AMS) and am really impressed with the results of my first test prints. I've been trying to decide between this or a K1 Max, but hearing how Bambu Labs printers are more reliable helped with my choice.
I love my P1S and actually plan on getting two more when I can! Only thing is I need me a good desk that’s sturdy to set it on! Also love your videos! Always enjoy getting to see what you’re working on and you inspired me to start printing a war machine suit!
Good review. I do have a video production tip for you. Your audio is off a little it sounds like you are filming in a small space. Hang up a ferny pad or blanket heavier the better on the wall behind your camera. It will reduce/eliminate that echo and some of the sharpness in the audio. Foam egg crate on the off camera walls will do wonders as a permanent solution. I have making tv shows for 18 years. Keep up the good work.
I got a P1S with AMS, and upgraded to hardened nozzle, and extruder gear. Owning it has been an absolute pleasure. I'm pretty mechanically inclined, so working on the printer, or ams is a breeze.
Thanks for posting this Bambu Lab printer comparison, Frank! Lots of valuable info here. I was planning to go with P1P, but now I'd rather get the P1S and get the AMS upgrade later. Cheers!!
A1 mini's a great entry level because of its price and size. I picked one up over the summer for 200 bucks at microcenter. I've been interested in 3d printing for about a decade but the cost has always been a huge barrier, now I can easily get one with my limited space. When I get a little more space I'm gonna look into a midsize printer like the p1s.
Been a subscriber since the days of you assembling the Ender 5+. Still have mine but about to gift it to the son of a good friend, as my P1S is now my love of printers. Patiently awaiting a larger machine to arrive from Bambu but I do have a Neptune 3 Max that handles the big stuff. I am getting a second P1S for a Black Friday purchase. Thx for all you do.
I want to get started in the 3D printing world and have been stuck between a Bambu printer, FlashForge 5m, and Neptune series. I think i am officially convinced on the Bambu p1s. Your content has been very helpful in guiding me to my first 3D printer. Keep up the great work
I have an x1c .. got it when they released it after the Kickstarter. Absolutely love it and have 0 regrets (even though I had to get it replaced under warranty for a few different issues). I completely agree with you and always advise the a1 or p1s to my friends depending on budget and have considered getting an a1 myself as it is quieter. But I will wait for the new releasing if they ever come for a larger build plate lol
Ordered the the x1c the other day. It will be my first. Thank you so much for this video. I wanted all the bells with it 😂 Yes I ordered from your link. Hopefully you got credit
Ironically just got a P1P before this video dropped as my 20th printer. Looking forward to companion cubing it and putting it through its paces. I got the hardened steel nozzle and camera upgrades to do what I need from the X1 without dropping way more cost.
I was planning to get a P1S but was hoping for a couple other things that a P2 was gonna bring. Just saw Qidi announced their Plus 4 and it looks phenomenal, especially with the build size. I think I'll pick up a Plus 4 for now, and an A1 or A1 mini later as a secondary printer, and for printing smaller projects.
Coming from Raise3D machines... Those prints you showed... The quality looks great and expected for the A1, P1P and P1S. But the quality from the flagship X1 is just horrible. I am considering their printer for a while now as my others are busy 24/7 and was considering X1 because of all the "great reviews" on youtube. But seeing the quality here made me realize its not worth it.. The P1S will be just fine. Thank you for helping me decide and not spend double the cash on the X1. Will rather buy additional P1S if the first one will meet my expectations and still be below the X1 price range.
I have many friends with printers and I have had them make me things in the past. Since I started my own business, (not 3D printing), I have found a need for some custom prints. I decided on the X1C as it was the best out there. Why not get the best if you don't know what you're doing eh? My goal was to print TPU corner protectors. Sadly, I haven't had any luck with TPU. So now I just use it to make presents for friends and family. After 1100Hrs in just over three months, I am super happy with it. I just wish I could get the TPU to work. I also have a dual AMS setup for 8 colour prints and no, TPU feeds out of a Creality Space Pi heater. Do you use a lot of TPU in your prints? I do not recall seeing any, but if you do, HOW!? Thanks for having an awesome channel bub.
My wife just got me the P1S combo for my birthday, I went from an Adventure 4 to that sooooo HUGE upgrade I don't think I've really stopped printing lol my only issue so far is on max size prints a corner has listed so I messed them both up, just gotta figure that out
My next printer is going to be an A1 Mini - for no other reason than to continue my collection of mini printers - Monoprice Mini, Prusa Mini, Voron 0.2, Positron 3.2, KP3S...
I love my X1C for printing lots of stuff for DND and rwndom projects. I do hope they announce a larger one soon as that is the main limitation. Some things dont fit as on big piece on the current bed size
they need a 320mm cubed printer for me to spend the money, only because it's a resonable move for them to make so i kinda expect them to do it as the next printer release (i'm kinda surprised they went with the A1 series but I can see them wanting to hit that market segment as well), and i'm not gonna spend the money on the p1s only to have buyers remorse when the bigger ones come out ;)
My biggest issue with the Bambu printers is that even the most expensive one is less than 300x300 on the build plate. For stability in my cosplay pieces I want to print in as few parts as possible. If Bambu came out with something like the X1C at 300x300 or even more I'd snap it up.
Great video, but it kinda reaaally bugs me that you never mentioned that you can buy that hardened steel nozzle for 35$ from the bambu store and install in the other (idk about the a1) printers. Just sayin
I like the Mini just because it is a lot more portable, I can print a handle for it and take it anywhere. It may be a small bed plate but I can print 80% of what I want, anything else I can use my K1 max
I would get the P1S, I think the lidar is a gimmick. I have a X1C and it has issues reading black filaments according to Bambu support. You can get a hardened nozzle and a touch screen for the P1S and it would still be cheaper than getting the X1.
A1 is best for beginners but if you really care about noise and fumes choose P1S. I saw various reviews about X1 Carbon, they(buyers) says go for P1S. Because it is less budget and still have high printing speed and can put AMS. Even tho my P1S is enclosed, I worry about fumes so I connect ventilation back of the printer and connect to window.
Thanks for the video mate. Would love to buy the best Bamboo Labs printer I could get but the print size is way too small. They need to do a 400 cubed. Or at least a 300mm. I'll wait a while before updating my Creality machines 👍
I've got a SV08 and want multi color prints since the co print project for it seems to of disappeared off the internet. I think after watching your video, I might just got for the A1 combo, especially with the black friday deals currently going on plus I don't need the speed since my SV08 prints fast and with very good quality. Great video comparison :)
I am looking to get a 3d printer soon and looking at getting the P1S combo. I just barely subscribed love your stuff in the background love the helmets. I saw a kingdom hearts keyblade ❤😍 I am in love and seeing the other weapons are so cool. I hope you can get a chance to respond but I am just doing research and it would be my first 3d printer.
Im new to 3d printing and I really regret buying the a1 mini because now I want to buy a bunch of other bambu printers its like a gateway into 3d printing lmao I love my a1mini but now i want more with bigger build plates!
I am 2 weeks into 3D printing and I'm really enjoying it. I purchased a Ankermake M5C which has been great, but I'm starting to out grow it. My next projects are either larger in size (Helmets) or higher in quality. I've watched a ton of your videos to try and help me decide but I'm stuck... The Bambu P1P has fantastic reviews but with a 256mm build plate, it falls just short of being able to print a full Mando helmet. What printer would you recommend in this situation? Keep up the great videos!
A1 combo over P1S I think is a way better first time printer for people. They get the multi color print as well as a fantastic printer, all for less than the p1s on its own! But if money is not a problem - p1s combo would be the way to go
Love my bambu p1s Since i got it i rarely use my others but im waiting for a larger scale one to come out. I just can't see myself getting a k1 max. I love bambus ams capabilities
For me the P1S is the one I would buy. The A1 is a non starter for me since bed slingers need that extra room to sling the bed around. Next these printers do release particulates so anything without an enclosure and exhaust fan option is another non starter. Luckily the P1S is affordable enough. Can do any material I’d reasonably print at home and is easy to use.
Honestly, if I could have the screen and hardened steel hot-end from the X1C on the P1S, it would be absolutely perfect. All the other bells and whistles on the X1C don't really interest me. Still, the P1S is just hard to beat.
I’m not sure if others have commented on this already, but you can put the hardened steel hot end on the P1 S and presumably the P1 P for pretty minimal additional cost.
Possible to swap extruder and nozzle in the P1S and get the best bang for the buck? AI seems to be a gimmicky feature, and lidar is good to have. Btw amazing channel, a bunch of you videos has inspired me to graduate from enders.
I just got the A1 mini combo about a week ago now and have absolutely loved it. I already have a Ender 3 s1 plus. Do for larger prints, that covers that. But I found a lot of things I were printing were quite small. So with that and limited space to put a 2nd printer. I felt that was perfect. I was wondering if you have a guide to reduce the amount of waste from the filament “poop”. Especially when changing colours
m have a dilemma now my fdm it's pretty slow and old ( talking about early creality printers old ) Thinking is about time to update and my dilemma is should i buy : - the a1 ( im mostly printing in pla ) - p1s ( you never know when i gonna feel the need to print of other materials + the ams its a blast for me as i struggle with humidity ) - or maybe wait to early 2025 for new bambu printer release
I have an A1 and I really like it, but now I want to print materials it can't handle. I want to buy the P1S, but it's been out for 2 years now and most companies bring out updated versions out by now, and that's the only thing stopping me now. I don't want to buy the P1S and a month later hear they're bringing out a P2S
Just watched your graphite finishing on the Mando helmet and I had to subscribe! Great tutorials! I just ordered graphite and will test this on my leg parts!
A1 Mini: "Am I a joke to you?" Seriously though, if you already have a printer and high quality things like miniatures are some of the things you print, get an A1 Mini as a second printer, and put a 0.2 nozzle on it. That's what I did after a week of having an A1, and accidentally printing a super HQ 44 hour print job. If you ever need to print things faster in normal quality, it's crazy easy to switch nozzles. EVERYONE into 3D printing should have at least a cheap second printer.
I remember you saying once that you were using your K1 (I don’t recall if it was the max or the smaller one) was your work horse. Flavor of the month? Or is the Bambu Lab video your current opinion? I am not being critical…I am in the market for my first printer in the CoreXY form factor. I do prefer the size of the K1 Max, but throwing that part out…I could get a regular K1 cheaper than the P1. Thoughts on that comparison, or maybe that would be an idea for a video K1 vs P1 - Cage Match!!!
He is talking about the k1 max due to the size. He prints different files on the machines and the K1 max is easier for larger props without having to weld them. Defo any Bambu over the standard K1 (pretty sure he mentioned it in a previous video)
I recently bought an A1 over the summer and have been printing non stop. Thank you so much for your videos. They have definitely helped me in my research and progress in this hobby. It has gotten to the point where I have even been able to patent a design I made and be in conversations with a company to make it more viable for buyers!
One thing you didn't touch on is the toolless hot-swappable nozzle on the A1. It's such an amazing feature to swap the stock 0.4 mm nozzle to a 0.6 mm for big prints or even a 0.2 mm nozzle for miniatures or high-detail prints. It's such an amazing feature and it really makes the A1 an excellent choice for someone getting their first printer. Also, the A1 is a lot less noisy in my experience.
Honestly as a Flashforge adventurer user the toolless swappable nozzle was nothing new. I'm mostly surprised that more manufacturers don't do it.
this is really helpful. I have the X1C and don't need another enclosure one, or AMS. My only concern about the A1 is the footprint needed for the bed moving around.
Bought the A1 Combo a few weeks ago after watching some of your videos and it's been a blast. I'm a teacher and I've been printing mini lightsabers as prizes for my students, along with a bunch of different toys for my children.
You sound like the type of teacher that we need to make a positive example of. Engaging and actively rewarding students were always the teachers that held the most attention when I was in school.
We got the X1C on your recommendation and we loved it so much we got a second one. We've had them now for over a year, they're both still amazing.
The AMS is a great addition to it, and we especially like the AI detection. Prints don't fail often (99% of the time it's adhesion issues because we didn't clean and prep the plate properly) and it has detected it every single time, saving us time and filament.
We ended up getting a textured PEI plate for them, which I'd also highly recommend.
Overall, I couldn't be happier with it and will happily recommend it. It looks intimidating, but I was a complete noob with 3D printing, and your videos + the instructions inside had it up and running the first benchy in under 10 minutes.
I'm a PLA goblin, The P1P is my baby, the fact that its $499 now is such a W. I just wish the bambu printers had a 300x300 built volume instead.
here's to hoping we see the next Printer they announce have that larger build volume!
@@Swainhammer13 That would probably dominate the cosplay market.
@@northernlight8857 I'll definitely be looking into one if/when it happens.
@@northernlight8857 literally as my wife is a pro cosplayer. i hate making things into tiny pieces. i would scream for a 350mm^3 bambu.
i hate that i paid 699 plus taxes /shipping so like 796 when it first came out and now the p1s is 599 but under 700 shipped lol. those A holes! They should give us vouchers to get a enclosure for paying that much more for the p1p.
Something I recommend touching on for the A1...the "Eddy Sensors" in the Nozzle (Active Flow Rate Compensation). A feature not present in the others, excluding the X1 (Lidar). This dramatically helps prevent flow rate issues, especially for those who are not used to fine tune calibrating their filaments!
The P1S is the best purchase I've ever made. It completely renewed my passion for 3D printing, my old CR-10 mini was great but I started having so many issues it turned me off 3D printing and I stopped using it. Since I got the P1S in may it's been going almost 24/7. 6 helmets, some 4 foot tall weapons, things I've sold, countless other stuff. And Its making my first full armor on it a breeze.
Full size wearable helmets?
@@fajarkoolhaas2101 ya I've printed 7 helmets now. Some helmets can be done in 1 piece depending on the size (spiderman, deadpool, power rangers) other larger helmets can be cut up to fit
@@NotALlama397 and yet all of the videos on your channel are gaming clips. ARE YOU NOT DOING ANYTHING WAAAAAAY MORE INTERESTING!? Hintedy-hint-hint!
A1 is probably the best entry level. 98% of my prints were successful. My failed prints were completely my fault. (Had the filament set to pla instead of petg on the ams, if you know you know) overall an awesome printer. I can't wait for my next one. The addiction begins. 😅
So i went Straight to the X1C w/ams as my first printer, with no real knowledge of 3D printing. (It is overkill at the moment for me, ngl) Fast forward a few months(with lots of teaching from friends), and I don't regret it! I can count my failed prints on one hand. I'm still branching out from PLA & exploring other materials, but nothing truly exotic that the printer is designed towards, yet. I do have future plans to print more exotic materials, while my main use is more aligned with yours. Now that I'm planning for a 2nd printer in the distant future, this video does have me thinking of the p1s!
Great Video as always!
I love my P1S! Definitely my most precious tool in my house and can't wait to get more like the A1 mini next. Just to have something actually at my desk and prototype small parts like I used to. The P1S is just too big for that but each printer has its use cases. The P1S can deliver quality, desired materials some printers can't do, and multi-material printing. The A1 mini is perfectly suited for any beginner without the AMS lite and compact. Bambu Lab really has done a nice job with their products, software, and ecosystem of parts. Highly recommend to anyone interested in their printers.
Thank you for all your videos and honest reviews. I'm finally taking the plunge and getting my first 3d printer and excited to do so. Been weighing my options and your videos have been extremely helpful. While I'm very hands on with being able to build/tinker with things (i.e. android over iphone, build my own pc, etc.), I think I'm heavily leaning now toward the Bambu Lab brand. Now, just need to decided between the A1 Combo or P1P... I know I have a long way to go and lot to learn (feel like my feet are just in the kiddy pool at this point), but am hoping to be able to print a large range of things from RPG mini's and terrain pieces to larger scale works like masks, gadgets/tools, and decorations. Speed isn't too big of a deal for me at this time as these will be more for personal projects and won't need to worry about quantity over quality, but not sure if the P1P would offer that smidgen of better quality (especially with smaller projects like the minis and 0.2 mm prints) and more room to grow with more filament options in the future.
I think this message comes too late, but I want to congratulate you. Frankly, I like your videos. They are detailed and easy to understand, and you help many people with them. Thank you. The problem with the discoloration of the A1 could be caused by a change in speed. At higher speeds, the filament receives less cooling than the parts printed at slower speeds. We can't always control the printing speed, and sometimes I have problems with discoloration or color changes on overhangs or near corners.
Started with an ender, then went to a v400 for better print speed, as well as a larger print size, but ran into a few different issues such as hitting prints off the bed and other issues causing quite a few failed prints. Finally i decided i wanted to get a bambu printer, ended up going with the x1 carbon, and it has been fantastic. Its ease of use makes the hobby really enjoyable. I agree about the price, but i have had the printer a few times detect spaghetti and stop the print, and also enjoy the touch screen. I didnt really want to get 2 p1s, just wanted one that worked perfectly. (Maybe would get another if they make a printer with a bigger bed) Overall great printer and company, and the bambu handy app is fantastic allowing me to print from my phone without even having to slice everything. Highly recommend to anyone who is on the fence with which printer to get.
your channel is always so helpful, educational, and inspirational
Do yourself a favor and get your self the P1S. I’m about to finish my 4th MM Power Ranger helmet (along with some other random prints) and each one comes out better than the last the more I learn about printer settings and post processing. I’m so glad I finally took that dive into this hobby and I’m very happy with how far I’ve come. Special thanks to you Frank for helping me get into this and for all the tips and tricks! You’re a huge inspiration! Love the videos :)
Hi awesome videos I have an A1 and one day hope to have a channel like yours! I’m 7 and just started a few months ago when my dad bought me a 3d printer!
I am a huge fan of Bambu Lab and their printers, but I have not had good experiences with their silk PLAs.
I have had the exact same rough texture on the exterior walls that you had on your A1 print (I think I also saw it a little on your X1C print on the right jaw bone). I also noticed that their silk stuck WAY more to the hologram plates I was printing on with a bed temp of 65c compared to every other brand of silk filament I have. For that matter their silk sticks to the hologram plates so badly I have to scrub it off with a blue sponge and dish soap with some elbow grease, and I don't have that issue with ANY other filament regardless of type of vendor.
My conclusion is they have modified their silk PLA formula so that it will print faster overall and also not require slowing down the outer walls to say 50mm/s to get a shiny exterior. I wasted about a 1/3rd of their silk blue PLA trying to print a Tron bike with it before I threw in the towel and bought a 3rd party roll of blue silk which gave me 0 issues.
The only thing I think could try next is to try the roll because maybe the additives they added absorbed water, but currently I avoid their silk PLA like the plague for the very issue you showed. I love all of their other filaments, especially their high speed PLA and translucent PETG.
My first printer was an Elegoo Neptune 4 Max. Which is definitely a Problem Child, but I got it at a great deal during the Labor Day sale, and I wanted something that prints REAL BIG. When it works, it's great, when it doesn't, it's frustrating, but I think it's been a good opportunity for me. As my first printer it has made me actually LEARN more about how to adjust and tweak settings etc. And its shown me that I DO like this hobby, even when it causes problems.
That said, I have been seriously considering grabbing a P1S as a second printer just for something nicer to handle and do more consistent printing without needing to tweak and adjust settings constantly. I just REALLY wish that Bambu made something with a bigger build area. I wanna print REAL BIG! Maybe someday soon.
It's funny, I've had the same experience with my Neptune 4. A lot of tweaking, etc., but so much valuable knowlege about 3D printing that I would've missed out on by getting a printer that just worked out of the box. I acually enjoyed the failure and the tinkering just as much as every good print. Now it's working perfectly I would say 80 percent of the time and I absolutely love it! I was thinking about getting a P1S but I couldn't bring myself abandoning my lovely Neptune 4 :) Maybe on Black Friday there'll be a good deal on the combo... I'll probably get it then but I'll alway keep my Neptune 4 ;)
I’m interested in hearing more. I’m considering a Neptune as my first printer. Recommend it or no?
Will you be review the K1 series?
Waiting for Bambu Labs to drop a larger scale printer before I buy another, I got 3 A1s and they're nice, but they have downsides. 🥶
May I ask what are the downsides?
not being a p1p
@@thedarkness37 Not necessarily any downsides I would say, the only thing is it's a bedslinger so it's a bit louder and lower quality, but I do highly recommend the A1.
@@peap1610I have an A1 mini and a p1p. Outside of build volume, they’re basically the same. There’s really no point in buying a p1p anymore, as the a1 does everything but is way cheaper
Not to mention the a1 series is locked to only 4 colors if I'm not mistaken
I just upgraded from an Ender 3 Pro to the P1S (non-AMS) and am really impressed with the results of my first test prints. I've been trying to decide between this or a K1 Max, but hearing how Bambu Labs printers are more reliable helped with my choice.
I love my P1S and actually plan on getting two more when I can! Only thing is I need me a good desk that’s sturdy to set it on! Also love your videos! Always enjoy getting to see what you’re working on and you inspired me to start printing a war machine suit!
Just got the x1c. Been an elegoo fan for 6 years and finally bought something else. Easily the best printer I have ever touched
Good review. I do have a video production tip for you. Your audio is off a little it sounds like you are filming in a small space. Hang up a ferny pad or blanket heavier the better on the wall behind your camera. It will reduce/eliminate that echo and some of the sharpness in the audio. Foam egg crate on the off camera walls will do wonders as a permanent solution. I have making tv shows for 18 years. Keep up the good work.
I got a P1S with AMS, and upgraded to hardened nozzle, and extruder gear. Owning it has been an absolute pleasure. I'm pretty mechanically inclined, so working on the printer, or ams is a breeze.
Thanks for posting this Bambu Lab printer comparison, Frank! Lots of valuable info here. I was planning to go with P1P, but now I'd rather get the P1S and get the AMS upgrade later. Cheers!!
What do you like more the A1or the Flsun SR?
A1 mini's a great entry level because of its price and size. I picked one up over the summer for 200 bucks at microcenter. I've been interested in 3d printing for about a decade but the cost has always been a huge barrier, now I can easily get one with my limited space. When I get a little more space I'm gonna look into a midsize printer like the p1s.
I am a 3D printing newbie. I bought the P1S Combo and love it. Learning something new everyday. Lithophanes are awsome.
Been a subscriber since the days of you assembling the Ender 5+. Still have mine but about to gift it to the son of a good friend, as my P1S is now my love of printers. Patiently awaiting a larger machine to arrive from Bambu but I do have a Neptune 3 Max that handles the big stuff. I am getting a second P1S for a Black Friday purchase. Thx for all you do.
I have 4 p1s and 4 a1 mini. The a1 mini is my favorite. I hope they drop even more in price when large one drops.
I want to get started in the 3D printing world and have been stuck between a Bambu printer, FlashForge 5m, and Neptune series. I think i am officially convinced on the Bambu p1s. Your content has been very helpful in guiding me to my first 3D printer. Keep up the great work
I have an x1c .. got it when they released it after the Kickstarter.
Absolutely love it and have 0 regrets (even though I had to get it replaced under warranty for a few different issues).
I completely agree with you and always advise the a1 or p1s to my friends depending on budget and have considered getting an a1 myself as it is quieter.
But I will wait for the new releasing if they ever come for a larger build plate lol
Ordered the the x1c the other day. It will be my first. Thank you so much for this video. I wanted all the bells with it 😂 Yes I ordered from your link. Hopefully you got credit
I'm still a relative amateur but my P1S makes me feel like a pro. I just love it.
Ironically just got a P1P before this video dropped as my 20th printer. Looking forward to companion cubing it and putting it through its paces. I got the hardened steel nozzle and camera upgrades to do what I need from the X1 without dropping way more cost.
Just get the P1S with the big tree tech panda touch, and you can always add a hotend upgrade like the big tree tech revo hotend nozzle.
I ended up buying the bambu x1c still waiting for it to arrive. Just for the piece of mind of starting a 3d print and leaving home.
I was planning to get a P1S but was hoping for a couple other things that a P2 was gonna bring. Just saw Qidi announced their Plus 4 and it looks phenomenal, especially with the build size. I think I'll pick up a Plus 4 for now, and an A1 or A1 mini later as a secondary printer, and for printing smaller projects.
Have the A1M. Been thinking about the QIDI Plus 4. My workplace has 3 X1C's w/AMS so I'm not sure if I want to go with the P1's.
Coming from Raise3D machines... Those prints you showed... The quality looks great and expected for the A1, P1P and P1S. But the quality from the flagship X1 is just horrible. I am considering their printer for a while now as my others are busy 24/7 and was considering X1 because of all the "great reviews" on youtube. But seeing the quality here made me realize its not worth it.. The P1S will be just fine. Thank you for helping me decide and not spend double the cash on the X1. Will rather buy additional P1S if the first one will meet my expectations and still be below the X1 price range.
Excellent video! As always! Honest and concise! ❤
I have many friends with printers and I have had them make me things in the past. Since I started my own business, (not 3D printing), I have found a need for some custom prints. I decided on the X1C as it was the best out there. Why not get the best if you don't know what you're doing eh? My goal was to print TPU corner protectors. Sadly, I haven't had any luck with TPU. So now I just use it to make presents for friends and family. After 1100Hrs in just over three months, I am super happy with it. I just wish I could get the TPU to work. I also have a dual AMS setup for 8 colour prints and no, TPU feeds out of a Creality Space Pi heater. Do you use a lot of TPU in your prints? I do not recall seeing any, but if you do, HOW!? Thanks for having an awesome channel bub.
My wife just got me the P1S combo for my birthday, I went from an Adventure 4 to that sooooo HUGE upgrade I don't think I've really stopped printing lol my only issue so far is on max size prints a corner has listed so I messed them both up, just gotta figure that out
My next printer is going to be an A1 Mini - for no other reason than to continue my collection of mini printers - Monoprice Mini, Prusa Mini, Voron 0.2, Positron 3.2, KP3S...
I love my X1C for printing lots of stuff for DND and rwndom projects. I do hope they announce a larger one soon as that is the main limitation. Some things dont fit as on big piece on the current bed size
they need a 320mm cubed printer for me to spend the money, only because it's a resonable move for them to make so i kinda expect them to do it as the next printer release (i'm kinda surprised they went with the A1 series but I can see them wanting to hit that market segment as well), and i'm not gonna spend the money on the p1s only to have buyers remorse when the bigger ones come out ;)
I really wanted a bambu , but the 300x300 of the k1 max , with your reviews changed my mind in the end
Great video! Very informative looking to buy the Bambu Lab printer.
I just got the P1S yesterday and I love it.
I ordered the Bambu Lab A1 yesterday, it'll be my first 3D printer. Funny that Frank posts this today!
I ordered mine last week. Then this comes out. Typical but I’m happy with the A1.
My biggest issue with the Bambu printers is that even the most expensive one is less than 300x300 on the build plate. For stability in my cosplay pieces I want to print in as few parts as possible. If Bambu came out with something like the X1C at 300x300 or even more I'd snap it up.
I have a P1P that I got because of your videos I’m currently using it to print a few helmets and stuff and have loved it
Great video, but it kinda reaaally bugs me that you never mentioned that you can buy that hardened steel nozzle for 35$ from the bambu store and install in the other (idk about the a1) printers. Just sayin
Thinking of going resin 💚🇬🇧🌱
Can’t go wrong with p1s. I came from Ender 3 KE, and a Qidi Q1 Pro, and my go to is my p1s combo ! Thanks frank❤
I like the Mini just because it is a lot more portable, I can print a handle for it and take it anywhere. It may be a small bed plate but I can print 80% of what I want, anything else I can use my K1 max
I would get the P1S, I think the lidar is a gimmick. I have a X1C and it has issues reading black filaments according to Bambu support. You can get a hardened nozzle and a touch screen for the P1S and it would still be cheaper than getting the X1.
A1 is best for beginners but if you really care about noise and fumes choose P1S.
I saw various reviews about X1 Carbon, they(buyers) says go for P1S. Because it is less budget and still have high printing speed and can put AMS.
Even tho my P1S is enclosed, I worry about fumes so I connect ventilation back of the printer and connect to window.
Thanks for the video mate. Would love to buy the best Bamboo Labs printer I could get but the print size is way too small. They need to do a 400 cubed. Or at least a 300mm. I'll wait a while before updating my Creality machines 👍
Now you have to review the qidi plus 4 and compare it to the p1s or x1c
I've got a SV08 and want multi color prints since the co print project for it seems to of disappeared off the internet. I think after watching your video, I might just got for the A1 combo, especially with the black friday deals currently going on plus I don't need the speed since my SV08 prints fast and with very good quality. Great video comparison :)
I am looking to get a 3d printer soon and looking at getting the P1S combo. I just barely subscribed love your stuff in the background love the helmets. I saw a kingdom hearts keyblade ❤😍 I am in love and seeing the other weapons are so cool. I hope you can get a chance to respond but I am just doing research and it would be my first 3d printer.
I just got my a1 last night and I’m in love with this machine
Im new to 3d printing and I really regret buying the a1 mini because now I want to buy a bunch of other bambu printers its like a gateway into 3d printing lmao I love my a1mini but now i want more with bigger build plates!
I am 2 weeks into 3D printing and I'm really enjoying it. I purchased a Ankermake M5C which has been great, but I'm starting to out grow it. My next projects are either larger in size (Helmets) or higher in quality. I've watched a ton of your videos to try and help me decide but I'm stuck... The Bambu P1P has fantastic reviews but with a 256mm build plate, it falls just short of being able to print a full Mando helmet. What printer would you recommend in this situation? Keep up the great videos!
P1s is my first bambu and will buy this brand always
A1 combo over P1S I think is a way better first time printer for people. They get the multi color print as well as a fantastic printer, all for less than the p1s on its own! But if money is not a problem - p1s combo would be the way to go
I want a big one
However, I love my P1P and have no complaints
This is very helpful I have been wanting to get one of them for so long
Once again ..Thank You Frank! 🎉
Any chance you got the qidi plus 4? Interested to see your thoughts on it.
Love my bambu p1s Since i got it i rarely use my others but im waiting for a larger scale one to come out. I just can't see myself getting a k1 max. I love bambus ams capabilities
I love my X1 my next printer will be resin 3d printer.
For me the P1S is the one I would buy. The A1 is a non starter for me since bed slingers need that extra room to sling the bed around. Next these printers do release particulates so anything without an enclosure and exhaust fan option is another non starter. Luckily the P1S is affordable enough. Can do any material I’d reasonably print at home and is easy to use.
I’m holding out for a core xy and the K2 max has a build volume I like. Just waiting for guys like you to get their hands on it and test it out.
Honestly, if I could have the screen and hardened steel hot-end from the X1C on the P1S, it would be absolutely perfect. All the other bells and whistles on the X1C don't really interest me. Still, the P1S is just hard to beat.
You can get a bartend steel hot end for p1s for 35 bucks btw
Should I get the combo for the A1?
Man I want one of these so bad
I’m not sure if others have commented on this already, but you can put the hardened steel hot end on the P1 S and presumably the P1 P for pretty minimal additional cost.
Yeah you can upgrade them
Just purchase a K1Max, eagerly awaiting its arrival 😅
What is better the P1P or k1max
Possible to swap extruder and nozzle in the P1S and get the best bang for the buck? AI seems to be a gimmicky feature, and lidar is good to have. Btw amazing channel, a bunch of you videos has inspired me to graduate from enders.
I just got the A1 mini combo about a week ago now and have absolutely loved it. I already have a Ender 3 s1 plus. Do for larger prints, that covers that. But I found a lot of things I were printing were quite small. So with that and limited space to put a 2nd printer. I felt that was perfect.
I was wondering if you have a guide to reduce the amount of waste from the filament “poop”. Especially when changing colours
m have a dilemma now my fdm it's pretty slow and old ( talking about early creality printers old )
Thinking is about time to update and my dilemma is should i buy :
- the a1 ( im mostly printing in pla )
- p1s ( you never know when i gonna feel the need to print of other materials + the ams its a blast for me as i struggle with humidity )
- or maybe wait to early 2025 for new bambu printer release
just got a X1C and its amazing. going from a 4 year old ender 3 its night and day. overkill for what I'm using it for but its what I usually do ;)
Nice to meet you today in the Jackson classroom! Awesome videos!
Love your vids you inspired me to start making my own helmets
you are the best 3d printer guru on you tube by a country mile love it going to get get the p1 combo i think
I have an A1 and I really like it, but now I want to print materials it can't handle. I want to buy the P1S, but it's been out for 2 years now and most companies bring out updated versions out by now, and that's the only thing stopping me now. I don't want to buy the P1S and a month later hear they're bringing out a P2S
I’ve been waiting for this one!
Thanks, this video was a lot of help
I bought an x1e lol idk why I liked the color more then the x1c
I needed this video!
Definitely looking at that p1p for a second printer
Just watched your graphite finishing on the Mando helmet and I had to subscribe! Great tutorials! I just ordered graphite and will test this on my leg parts!
You’ll notice the stainless steel nozzles have been discontinued, you can only get hardened steel nozzles now. Nice bonus.
What about the flow sensor of the a1? Does the P1P or P1S have this sensor, too?
I couldn't wait any longer for them to drop a big bed printer so bought a SV08
Soon as they do drop a big bed printer with AMS V2.0 I will buy it
A1 Mini: "Am I a joke to you?" Seriously though, if you already have a printer and high quality things like miniatures are some of the things you print, get an A1 Mini as a second printer, and put a 0.2 nozzle on it. That's what I did after a week of having an A1, and accidentally printing a super HQ 44 hour print job. If you ever need to print things faster in normal quality, it's crazy easy to switch nozzles. EVERYONE into 3D printing should have at least a cheap second printer.
Getting my p1s combo end of month 😁
I remember you saying once that you were using your K1 (I don’t recall if it was the max or the smaller one) was your work horse. Flavor of the month? Or is the Bambu Lab video your current opinion? I am not being critical…I am in the market for my first printer in the CoreXY form factor. I do prefer the size of the K1 Max, but throwing that part out…I could get a regular K1 cheaper than the P1. Thoughts on that comparison, or maybe that would be an idea for a video K1 vs P1 - Cage Match!!!
He is talking about the k1 max due to the size. He prints different files on the machines and the K1 max is easier for larger props without having to weld them. Defo any Bambu over the standard K1 (pretty sure he mentioned it in a previous video)