900 Degreess DIY Steering Wheel (Cheapest Version)
ฝัง
- เผยแพร่เมื่อ 11 พ.ย. 2020
- In this video, I will make a very simple steering wheel that can rotate 900 degrees. I will produce many different steering wheel models in our simulator series. I made a steering wheel with a rotation angle of 900 degrees to experience real driving feel in games. I tested it in Euro Truck Simulator 2, iRacing, Dirt Rally. We will make different simulator systems not only for cars but also for airplanes. I used 15 teeth with small teeth and 54 teeth with large teeth.
Materials for diy sim racing steering wheel: a.co/fSUxQDF
My favorite sim racing equipments: a.co/aeiOxzJ
Project Files bit.ly/2Tsj9gd
*The Blog Content is preparing
My Workspace Equipments: www.amazon.com/shop/ilgeipek/...
For more diy sim racing projects: bit.ly/3KsjSYp
Project's Parts:
- Arduino Leonardo: bit.ly/2UmMw4a or amzn.to/36vSyVA
- 10K Potentiometer: bit.ly/3kpT5x6 or amzn.to/3lqWyNk
- Micro USB Cable: bit.ly/3kn0L3u or amzn.to/2GYc8kK
- Assembly Cable: bit.ly/2Umx73O or amzn.to/3nnZnQ5
- 2 pcs 150x300 mm (6x12 inch) 4-6 mm (1/8 inch) Acrylic Panel
- 2 pcs 8mm Bore Ball Bearing: bit.ly/3koZTLF or amzn.to/2UlTGFK
- 4 pcs 110 mm M8 Fully Threaded Rod: bit.ly/2IzFzdq or amzn.to/2IwR0SQ
- 1 pcs 150 mm M8 Fully Threaded Rod: bit.ly/2IzFzdq or amzn.to/2IwR0SQ
- 9 pcs M8 Self-locking Nuts: bit.ly/2Uhq6kK or amzn.to/32AjSRC
- 22 pcs M8 Nuts: bit.ly/35pIz4S or amzn.to/36xemAj
- 19 pcs M8 Washer: bit.ly/36szuYl or amzn.to/3kml157
- 4 pcs M5x16 mm Hex Screw: bit.ly/3ktFncB or amzn.to/3lq4b6Q
- 4 pcs M5 Self-locking Nuts: bit.ly/2Uhq6kK or amzn.to/32FetbN
- 8 pcs M3x6 mm Screw: bit.ly/3nhI1nH or amzn.to/35oRrrp
- 4 pcs 10 mm F-F Spacer: bit.ly/3kpDNsj or amzn.to/3nfUvfE
- 2 pcs M4x20 mm Hex Screw: bit.ly/3kmZMjx or amzn.to/35mtEby
- 2 pcs M4 Nuts: bit.ly/2GV39AP or amzn.to/3lvPCig
- Steering Wheel: bit.ly/3kn0Unh or amzn.to/2UhvlAW
🛠️ Tools:
Cutting Mat:
BG: bit.ly/3bynF54
AMZ: amzn.to/3h3pjwA
Soldering Iron:
BG: bit.ly/330sm3D
AMZ: amzn.to/35cB9Cy
Solder:
BG: bit.ly/2RcZLCZ
AMZ: amzn.to/3jRWZ1Y
Solder Paste:
BG: bit.ly/3h4YOGY
AMZ: amzn.to/2GB0UlC
Tweezer:
BG: bit.ly/3i4pQ2x
AMZ: amzn.to/2DzP61V
Cutting Plier:
BG: bit.ly/331E12i
AMZ: amzn.to/2QZSV3n
Heat Shrink Tube:
BG: bit.ly/336x4gx
AMZ: amzn.to/3lRbncV
3D Printer (Ender 3 Pro):
BG: bit.ly/3jObeVC
AMZ: amzn.to/358lsfu
Filament:
BG: bit.ly/3h5Rr24
AMZ: amzn.to/2R1JfFM
#ets2 #DIY #simwheel - วิทยาศาสตร์และเทคโนโลยี
Waiting for you to add Force Feed Back. Thanks for the Knowledge!
The video of the steering wheel with feedback in its Original Channel: th-cam.com/video/hbCjbCfUp0g/w-d-xo.html
@@burakozmen8018 but its turkish
Thank you so much for the great video. I'm a young engineer myself and I'm trying to make a force-feed back system as well as a sequential shifter, this video and your files were a massive help!
Is it working?
We need an update! :o
This is like EXACTLY what I was looking for. Thanks! I'll just add some buttons and posibbly also build your pedals!
Do you know where he soldered the wires?
@@ropergames889 i think he has provided wiring diagram on his orignal channel
the momo wheels always look good. Love it.
Subscribed because you actually have project files
the build quality is soo good that i thought you were doing a review on a steering wheel until i read the title and realized it was a DIY project
I just gave you your 500th sub, great stuff!
Sooooo much clean work !
Your workshop is amazing
Cool man I might just have to try to make one myself keep it up
$300 drill press, $400 3d printer. Uses hacksaw to cut threaded rod.
U can make these parts in any machine shop
This is just nitpicking at this point
@@the555timerstill not wrong
You are right, but you must be new to diy. If you just want a cheaper steering wheel, just buy the cheapest one on the market. Because building one yourself takes tools and skills. If you don't have those already, then it's going to take time and money to get them.
There are eady DIYs where you only need plastic bottles and hot glue. But then there are DIYs that require you to have a 3d printer or a workshop. Some even require metalwork.
thx 4 sharing ! my problem solved :)
can springs be added on the toothed wheels to make the steering wheel return to its position?
bro... that is a really good work...
looks so good
Great work your, compliments and thanks to share it with us. For you it's possible apply at the wheel a little of torque? it seems very free to rotate. For you it's possible apply at the project some springs or elastic for create a resistance? Thanks and sorry my bad english
instead of making this with 2 pieces of acrylic is is it possible to make it with a plastic enclosure or project box?
Eline sağlık abi
Did you make something like a speedometer on the left side of the controller?
Hey cool video brother, btw I just wanted to ask if if its ok with 50k potentiometer to use?
Cheapest version
*proceeds to take out a momo steering wheel*
Thank you for your idea. I made this all for 30$ and it worked as well.
Do you have to program the Adriano
@@dehanyahatugoda1256 yes
@@dehanyahatugoda1256 if you don't know how to do this watch this video it will help you.
th-cam.com/video/FxuDD6lyDxw/w-d-xo.html
I'm new to arduino is their anyway u can show it?
@@dehanyahatugoda1256 yes pls
Also you could use those "cutouts" that comes within the steering wheel to screw some "shift paddles" hehehe...
amigo, parabéns pelo projeto. gostaria muito de montar esse projeto, os programas que você usou, onde acho o link ?
friend, congratulations on the project. I would love to assemble this project, the programs you used, where do I find the link?
Hello, i just want to ask what should I do if I want to use something like this in f1 game? Thank you
what is that software you using called ? and what program did you upload to the arduino ?
Just a quick question, why a potentiometer and not a rotary encoder? which is better?
hi im printing all the parts for this now but im just wondering if u can use a pro micro instead of an leonardo, just because thats all i have access to atm.
Hello ilge, with this simple circuit, does it respond well to commands? Thanks for sharing.
thank u very much for the video but can i use arduino UNO or should i use LEO ?
hello, is it possible to give both gearwheel models in a4 form?
it work only on arduino Leonardo? I have duemillanove
Hi I am planning to make something like this and I need to know how big the gears were thank you please respond
ilge abi demek videoları bu kanaldan çalıyoduuun (!)
Hello, how do you choose the right potentionometer?
Muito top meu amigo parabéns
Let me ask you, the steering wheel turns on bt but turning to the right is ok but to the left the steering wheel runs full speed. The effort of locking it to prevent it from rotating is a failure, isn't it? I hope you can help me?
hi i like your videos i have a question can i use arduino uno
Do you know where I could find a gear that stops itself at 900 degrees? I don’t have a 3d printer
Hi can i use the arduino pro micro instead of Arduino Leonardo R3
Hey can i use 10k potentiometer 0.125w instead of 0.2w
Hola el Arduino cuál programación le pusiste unojoy?
Deserves more than 1m subs
Tame odia?
Can add the pedals in same arduino? if yes can you send a code for upload? (srry bad english brazilian)
Will a speed encoder work?
hello, i needed some help with uploading the hex files i was always getting connecting to programmer only and nothing further
hi bro, great project !!!
But a ihave 1 question
how much infill you use in those prints??
Im not sure of course what he used, but in my experience 3d printed gears benefit mostly from having 4+ perimeters (walls) so the teeth are pretty much solid infill. Overall infill I'd say don't go below 30.
Does it work with uno or mega ?
How did u make the pedals
If there was a total cost for this wheel in parts how much would it be? I can’t look because it’s harder to do on my phone
amazing gut chop
Is there any way that i can get the gears gerber files??
does this hv force feedback
great project! why do you use a poti instead of a rotary encoder? how did you fix the big gear to the poti?
rotary encoders unless expensive Optical ones are very inaccurate (20 pulses/detents has a minimum of 18 degrees of deadzone so horrible for wheels) and also are noisy and require a bit too much force to move, compared to that a potentiometer is smooth, cheap and has a very high resolution. Optical encoders are expensive. Hall effect encoders can be used but are rather complex and again hard to find or expensive especially with the firmware used.
IS THERE ANY CODE BEEN UPLOADED IN THAT MICROCONTROLLER????? can someone please tell me
if you don't wanna use for force feedback you can use an xbox360 controller chip from aliexpress for only 25 bucks. I'm now a new subscriber. Greatings and like from Spain
Do shifter and pedals for this stering wheel
Wait for FFB version .
Thanks a Million ...
its already on his main channel, he uploads the video here too soon.
can you make a follow up video of this and play fh4/fh5
what is the size of the gears in centimeters ?
Where can I find the source file for the Arduino Leonardo code?
I have a question about Potentiometer, you used "B10K" with that tag, I have a Potentiometer with "50K" tag. I don't understand Potentiometer very well, so I'm wondering if I can use mine, is there any way to use "Arduino" instead of "joystick" and how to connect that?all the better!
The analog value of the potentiometer is converted to digital ranging from 0 - 1023, so the potentiometer value doesnt matter, so you can use 10k or 50k or 100k, they all work the same...
th-cam.com/video/LWzLO_v8CtI/w-d-xo.html
what is the size of that two toothed wheel?
what show, works on ps4 GT Sport?
Bu projede Arduino mu stm32f407vgt6 mı iyi olur
Where can i find the firmwaare or source code?
What size of plastic gear?
How much it cost is needed for making this driving wheel
Great work. I made a wheel for farming simulator using a Bourns 128 pulse absolute encoder and an arduino leonardo. No gearing is required because the arduino can count the turns of the encoder and with 128 pulses per rev it has enough resolution for what I wanted.
no gearbox? did you attach the wheel drive shaft direcly to the encoder? i want to build this for my arcade cabinet. can you sent me a photo of your build?
@@sub-arts128 yes I used a small piece of rubber hose the connect the end of the steering wheel shaft to the shaft of the encoder, it allows for slight misalignment. My setup is very basic and roughly assembled, only as a fun project for a wet day. It works very well but doesn’t get used very much
@@josephinring good idea. is this stable, even if you move the wheel very fast? did you use mmjoy to measure the encoder signals or other? could you send me a photo? this method seems easier than printing out gears
It is very stable, I use an arduino leonardo or micro which can act as a usb joystick. The burns encoder uses absolute values so each position is unique and it’s impossible for steps to be missed even if you go very fast. Since it has 128 steps it means that it has a resolution of approximately 3 degrees per step. For games like farming simulator where vehicles have 4-5 turns of the wheel from lock to lock, this is more than accurate enough, maybe a more precise encoder would be needed for racing games. I might do a video on the setup and code at some time but I am only a beginner at coding so mine isn’t perfect.
@@josephinring Can you share your way of attaching the wheel shaft to the encoder, I am using a 10 turn Potentiometer as I couldn't get my hands on an encoder, and I am kind of struggling with attaching the wheel to the potentiometer, I've designed a small 3d model which can house the potentiometer and the wheel together, but I have no idea how to make it stable enough
Nice, but when you rotate wheel all the way to the right or left does not all the torque from wheel+your arm go to the metal stopper on the potentiometer or am i missing something?
He has a stopper notch on the big gear
@@dirtbuilder4615 Oh, i see, thanks!
Abi bence sen bunları seri üretim yap, biz de yapmak isyoruz ama çark mekanizması zor geliyor. Sen parça parça üretsen en azından alır kurardık
what games can it be used in
encoder ile yapılan versiyon olacakmı?
it doesn't have feedback right?
can i use this diy in forza also...?
TOP
i reworked this a bit to adapt my old xbox wheel to 900 degrees :)
would you mind if i put the files up on thingiverse to help people with similar designs? (i will give credit and link back to this video)
Can i use arduino uno instead of leonardo?
Can we use it with ps4 ?
is it the potentiometer that turns 900 degree or the mechanism that you use btw im cant wait to see gameplay videos with this keep up the work my guy
I know this is an old comment, but for anyone else out there, no, potentiometer can't turn 900 degrees. At best they can turn around 270 to 300 degrees, since they simply run out of resistive strip.
Abi yapmıs olduğun minyatür pcde küçük bir monitör bulup ona çerçeve yapıp onu zorlayacak oyun açıp deneyebilirmisin ama biraz tabikide bu bütçeli olacak ya da mini pcyi güçlü yapıp oyun oynayarak gösterebilirmisin ? Direksiyon setide baya güzel olmuş bu arada abi ellerine sağlık!
Kardeşim yorumu ingilizce yap
@@tuqn2377 Adam türk
can i do it with an arduino uno?
Where to connect wires pls anyone tell me
how much money take to make this streeing wheel for me please tell me early as possible
Qual é o nome desse jogo de carro meu amigo
Como eu faço pra ter acesso a todos esses item pra comprar?
Abi 900 derece mi yoks ayarlnabiliyo mu dha fzlsı için
i love it.. i want to make this. can u make force feedback prototype ? and can u add force feedback in this model? if yes . make video like this video.
Thanks. Yes, i want to make feedback version. :) The next video is DIY Pedals. It is coming soon.
Is it compatible with Xbox?
will this work with photoelectric encoder?
Hey, I’m building something similar but instead of arduino I’m using ps4 controller, but my potentiometer gives stuttery responses and when I go in game the wheel is shaking very faintly without touching, any thoughts on how to fix it?
depends on the game, usually you want to experiment with changing the input method, try changing to wheel or gamepad, should fix that problem.
Abi gozunu sevem ffb versiyonunu da yap
PODRIAS HACERLA PROGRAMACION PARA ARDUINO UNO
How much to make me one of these
Is there any way i can do this using an arduino Uno ?
Hello, buddy. I wonder who have diameters of gears with teeth. thanks.
Where i can find the code for arduino ?
Add a bungee cord for steering tension
Can you make a shifter
Why not make it direct drive?
Which games can we play on this?????