You should really start the Shimming process by matching the Motor Pinion, and Bevel Gear positions, to get the best mesh possible, then do the Spur Gear, then the Sector. Nothing wrong with the original Nylon Bushes, and they don't require any lubricant. Double O-Ring Cylinder Heads are no better than the single O-Ring type, and there's no advantage to having a metal Head over a plastic one. The Gearbox sounds quite noisy to me, like the Motor height adjustment is too 'tight'.
Add forgetting to glue the bushings in to the lists, it's actually more important to do than many think. I actually fixed a TM P90 for a guy a few years ago that had un-glued metal bushings, had to replace the entire gearbox shell since one of the bushings had worn the hole in the shell oval. I always glue bushings and bearings in properly with two-components epoxy glue so they'll sit securely in the shell. Also, the "silicon" oil he uses from that spray can is not suitable for lubricating the cylinder, always use pure silicone oil or paste.
I have king arms p90 and open the gearbox, surprised that the gearbox ver 6 of king arms are already upgraded, all pivot are bearing and uses CNC gears.
Ahoj, tiež by som rad upgrajdoval P 90 je aj niečo na čo si dať pozor? Škoda že vo videu nemáš aj ako rozoberať. A trošku aj nevedomky nejaké veci nie sú úplne viditeľné čo je škoda ale super isto mi aj toto pomôže z hopup komorou a samotnou hlavnou nemáš skúsenosť?
I'm testing this at the mo and I'm having feeding issues as the nub on the sector gear that engages the tappet is smaller so it's not drawing the nozzle back as far
What p90 is this for? I'm new to Airsoft and I'm finding an issue with compatibility. I want the CYMA 060 P90 but not sure if I get get any generic upgrade for any p90 and it will work in my gun
Good video. I'm looking at getting one at the moment. Have you done any upgrades since? What was your RPS? Do you have a solution for protecting the built in red dot from damage? That's my major concern.
I doesn't require much, the most relevant parts you'd need to buff rps are motor and the battery, red dot is very small to be concerned about but you can buy a list of polycarbonate and glue a piece onto the front and back
Hello! did you change the motor or is the stock 1000 model? I'm planning to upgrade my P90, but it's the HC model with 30000 motor. I should use higher torque gears, because the stock motor already has the speed. I'd like to preserve the 25 rps but with 350fps. Thanks!
Hey mate, where did you get the Guarder bushing rings from? I can't find them on any site, or what size the ring is (not thickness, the circumference :)) Thank you mate
Adam's Way hello thank you so much for replying. I’m a total noob when it comes to Air Soft. I recently just bought myself a used P90 airsoft gun that’s Electric automatic. I think it is the echo1 E90. I’m really clueless and was wondering if you can recommend me any scopes, battery wattage, new gear box or any type of upgradable parts I can use ? I don’t know what they’re called or what to look for. I don’t know what type of scope to buy or even a battery replacement. Please help me out :)
www.airsoft-online.cz/specialni/loziska-pro-p90/ www.airsoft-online.cz/podlozky-pod-kola/set-podlozek-pod-loziska/ www.airsoft-online.cz/vzduchotechniky/vzduchotechnika-s-pistem-pro-p90/ Pružinu měli od Guarderu pro P90 v actionshop.cz (je potřeba se poptat) Ozubená kola jsem kupoval v kamenné prodejně a jsou vysoce zátěžová. Budu dělat ještě jedno video, protože zbraň začla střílet po dvou kuličkách. Je potřeba udělat nakonec úpravu v mechu. Zbraň: www.airsoft-online.cz/aeg-bullpup/p90-3/ Doporučuji tyto zásobníky (lepší než orig): www.airsoft-online.cz/tlacne-nizkokapacitni-7/zasobnik-pro-p90-abs--tlacny--68bb/ Silikonový olej a mazivo Mogul LV 2-3 jsem koupil v obchodě s auto doplňky/díly. (levná položka) Tato zbraň je po upgrade naprostá střela i přesto, že to není nějak zvlášť velký výkon. Díky krátké hlavni se s ní velmi dobře hraje. Silnější pružina by se neměla už dávat, jedině po pořízení CNC mechaboxu.
It is nice to see an up to date video of the p90 ver 6 gearbox upgrade, I have this myself and fear messing inside, good video and commentary! :)
Thank you!
Finally i can see how to fit a stronger spring in there properly, thank you!
You should really start the Shimming process by matching the Motor Pinion, and Bevel Gear positions, to get the best mesh possible, then do the Spur Gear, then the Sector.
Nothing wrong with the original Nylon Bushes, and they don't require any lubricant.
Double O-Ring Cylinder Heads are no better than the single O-Ring type, and there's no advantage to having a metal Head over a plastic one.
The Gearbox sounds quite noisy to me, like the Motor height adjustment is too 'tight'.
Add forgetting to glue the bushings in to the lists, it's actually more important to do than many think. I actually fixed a TM P90 for a guy a few years ago that had un-glued metal bushings, had to replace the entire gearbox shell since one of the bushings had worn the hole in the shell oval. I always glue bushings and bearings in properly with two-components epoxy glue so they'll sit securely in the shell.
Also, the "silicon" oil he uses from that spray can is not suitable for lubricating the cylinder, always use pure silicone oil or paste.
Hi can you link where to buy these parts or what they are called
I have king arms p90 and open the gearbox, surprised that the gearbox ver 6 of king arms are already upgraded, all pivot are bearing and uses CNC gears.
Ahoj, tiež by som rad upgrajdoval P 90 je aj niečo na čo si dať pozor? Škoda že vo videu nemáš aj ako rozoberať. A trošku aj nevedomky nejaké veci nie sú úplne viditeľné čo je škoda ale super isto mi aj toto pomôže z hopup komorou a samotnou hlavnou nemáš skúsenosť?
can you use basic V2/V3 gears on V6 gearbox?
I'm testing this at the mo and I'm having feeding issues as the nub on the sector gear that engages the tappet is smaller so it's not drawing the nozzle back as far
Can I get details of your part upgrades and from where you bought it? Thanks
Did you ever get the info if so I'd be interested as well
Nice vid dude! keep up the good work!
Thank you! :)
Awesome video thanks bud
What p90 is this for? I'm new to Airsoft and I'm finding an issue with compatibility. I want the CYMA 060 P90 but not sure if I get get any generic upgrade for any p90 and it will work in my gun
This is TokyoMarui, but i think parts are same like from CYMA.
Good video. I'm looking at getting one at the moment. Have you done any upgrades since? What was your RPS?
Do you have a solution for protecting the built in red dot from damage? That's my major concern.
I doesn't require much, the most relevant parts you'd need to buff rps are motor and the battery, red dot is very small to be concerned about but you can buy a list of polycarbonate and glue a piece onto the front and back
Hey Adam good video. What gearset have you used as I'm struggling with my choice?
I guess I'm not getting a reply if it helps I've tried an shs 13:1 gearset and with a 30k motor and a gate nano aab I'm getting 28rps on an 11.1v
Subir une coupure d'image avec votre main qui passe devant la caméra toutes les 4 seconde c'est dommage, pensez a choisir un meilleur angle de vue.
Nice video len neviem či tm p90 má rovnaké vnútro mechaboxu ako cyma p90.
Hello! did you change the motor or is the stock 1000 model? I'm planning to upgrade my P90, but it's the HC model with 30000 motor. I should use higher torque gears, because the stock motor already has the speed. I'd like to preserve the 25 rps but with 350fps. Thanks!
No. I used original motor. I have no CNC gearbox and I didn't want to risk breaking of the original gearbox. Good luck :)
Hey mate, where did you get the Guarder bushing rings from? I can't find them on any site, or what size the ring is (not thickness, the circumference :)) Thank you mate
Very interesting, can you please give us links to the elements of your upgrade ?
Thank you! I answered to this. You can find links in first comment. (in czech language)
What is your sight where did you get one ? If I wanted to get a scope like an acog what do I look up ? Is this gun 20 mm rail ??
Flex Tape Scope In this TokyoMarui model is integrated. You can get another model of this gun with rail manufactured by CYMA.
Adam's Way hello thank you so much for replying. I’m a total noob when it comes to Air Soft. I recently just bought myself a used P90 airsoft gun that’s Electric automatic. I think it is the echo1 E90. I’m really clueless and was wondering if you can recommend me any scopes, battery wattage, new gear box or any type of upgradable parts I can use ? I don’t know what they’re called or what to look for. I don’t know what type of scope to buy or even a battery replacement. Please help me out :)
Did you fix AOE ?
yes
What mags do you use and how they feed ?
CYMA and it is better than orig. Tokyo Marui. CYMA is very good. :)
Pošlite mi prosím linky na tie veci.
www.airsoft-online.cz/specialni/loziska-pro-p90/
www.airsoft-online.cz/podlozky-pod-kola/set-podlozek-pod-loziska/
www.airsoft-online.cz/vzduchotechniky/vzduchotechnika-s-pistem-pro-p90/
Pružinu měli od Guarderu pro P90 v actionshop.cz (je potřeba se poptat)
Ozubená kola jsem kupoval v kamenné prodejně a jsou vysoce zátěžová. Budu dělat ještě jedno video, protože zbraň začla střílet po dvou kuličkách. Je potřeba udělat nakonec úpravu v mechu.
Zbraň: www.airsoft-online.cz/aeg-bullpup/p90-3/
Doporučuji tyto zásobníky (lepší než orig): www.airsoft-online.cz/tlacne-nizkokapacitni-7/zasobnik-pro-p90-abs--tlacny--68bb/
Silikonový olej a mazivo Mogul LV 2-3 jsem koupil v obchodě s auto doplňky/díly. (levná položka)
Tato zbraň je po upgrade naprostá střela i přesto, že to není nějak zvlášť velký výkon. Díky krátké hlavni se s ní velmi dobře hraje. Silnější pružina by se neměla už dávat, jedině po pořízení CNC mechaboxu.
Please tell me where I can get the required parts when I'm in Europe. (Germany)
lol jde vidět, že si z česka xD né podle angličtiny ale podle přízvuku xD jinak dobrý angličtina
a vazeliny plastické :D
Shimming is not made well. Too much grease.
Bad shims
If this gearbox would fit in a famas, I will be very happy.
Famas has v1, they all are similar though