Super cool stuff OP. I was in high school when the 5.0 Foxbody's ruled the roads. Never did I think that one day Mustangs would be coming out with 465 hp STOCK! Back in the day 225-245 hp seemed like a lot. Still like the way the Foxes look the best.
To be fair the fox was 600-800 lbs lighter than a new gt and even though they only had 225 hp they had 300 torque and with a couple bolt ons and a set of steeper gears out back they can be very fun and much quicker than what they seem on paper to someone who just looks at hp ratings. The power to weight ratio, especially the torque to weight ratio isn't nearly as bad as it seems vs the newer cars. Clearly they're faster but a fox can keep up nicely with a stock new gt with 300 to the wheels even though they're well above 400. These things are fun. Solid axle and no nannies to protect you. It don't do them justice just talking about their stock hp rating which I think many do.
Still can’t get over you getting that car for what you gave for it!! It’s pretty amazing how much that lip changed the look of the car. I’ve never seen a lip like that on a Fox body. Looks👌🏽🔥🔥🔥🔥🔥
Im a firm believer of “if it looks good on the car, it shouldnt be an issue”. Prime example is putting the big wing on a WRX. It fits perfectly and looks good. Doesnt mean you are trying to make it look like an STi, just a nice WRX with a factory style spoiler
You have one of the best looking fox body's I've ever seen. that lip enhanced the look a lot. Looks completely custom, but in the best way possible. I'm not a purist like some of the other fox body fans who need to have their car exactly original. To me the point of the platform is to make the car YOURS and customize it to your liking. You're lucky to have such awesome vehicles to drive.
It’s the cobra grill insert you’re looking for and you can find it on LMR. Car looks great. The 5.0 badges are in the totally wrong spot, LMR has a placement stencil!!
I like the chin spoiler! All mustangs and dodges look better with the front lip. I like the yellow protective covers they put on the challengers and chargers too
There’s a factory insert in the center for the Ford emblem, but it was filled in by a previous owner, wouldn’t be hard to get back, but may have to re-spray the bumper if not the whole car
That looks great and i dont have an issue with your installation. If the "proper" way was screwless and didnt involve drilling into the body then i might feel different but either way you were going to have to drill into it. I think it looks awesome.
Derrick those are lx front bumpers with the ford emblem and the other are cobra if you wanted the pony logo. The gt’s have the ford but no cut out. Hope it helps 👍🏾
They are super expensive and nobody really makes them. You also have to get the air dam for the earlier models. I also feel it has a ground effect so they throw it off a bit
I think I would have used nylon push rivets instead of screws. Easier to install and uninstall, will hold just as good but no worries of stripping and won’t cause you to have flat if one works it’s way out and ends up in one of your tires.
The hole on the front is a cobra front bumper. You can buy the whole front bumper or I belive LMR sells a kit where you can convert the gt bumper but you gotta cut into it.
So knowing that you are a New Edge guy at heart does anyone make a chin spoiler like this for the new edge? Anything other than the same Mach 1 spoiler that everyone has?
I think I would of love to seen that splitter in a dark grey like modern cars or nascar, so that it separates the fact that it us 2 piece instead if one, or a matte grey
I also have a 88 fox with a 393 and I have the cobra bumper and the insert which allowed me to put the ping emblem there and yes it’s open So I. Order to do that you need to get the number and the insert
I did my version of a lip like Porsche gt3 rs 2019 on my 93 mustang with home depot door sweep if looks amazing as another youtuber did on his newer mustang
You asked if we hate the foxbody mustang build . No . Any mustang build is worth showing. But there are so many 3 valve owners out there . They need their time as well on your channel. Came across a Kenne Bell 3 valve mustang that that was 800 + to wheels with just bottom end forging and bigger injectors and fuel pump. No headers, cams, etc.
I was kinda sceptical when you mentioned that lip, dont think I've seen a fox around my area with it, but I think it looks good. I saw a black GT like yours on FB the other day with the terminator wheels, cowl hood & cobra grill &i it looked sweet.
Everyone loves everything makers.....the most controversial foxbody mod is an ls swap and 1 piece headlights.
The lx tail lights are trash the gt ones are way better
@@IsGAdrian I disagree. The Cobra rears are God tier.
I dispise them one piece head lights🧐
@@TheHtown123 I like the cobras n the gt just the lx are a no no
@@grandspringdale1564 yea those are trash don’t like it keep it original
Cobra grille insert will change the whole front end for you, easy install, good content.
That’s what I’m sayin!
Yeah the cobra grille
That front lip looks right at home.
Super cool stuff OP. I was in high school when the 5.0 Foxbody's ruled the roads. Never did I think that one day Mustangs would be coming out with 465 hp STOCK! Back in the day 225-245 hp seemed like a lot. Still like the way the Foxes look the best.
To be fair the fox was 600-800 lbs lighter than a new gt and even though they only had 225 hp they had 300 torque and with a couple bolt ons and a set of steeper gears out back they can be very fun and much quicker than what they seem on paper to someone who just looks at hp ratings. The power to weight ratio, especially the torque to weight ratio isn't nearly as bad as it seems vs the newer cars. Clearly they're faster but a fox can keep up nicely with a stock new gt with 300 to the wheels even though they're well above 400. These things are fun. Solid axle and no nannies to protect you. It don't do them justice just talking about their stock hp rating which I think many do.
Still can’t get over you getting that car for what you gave for it!! It’s pretty amazing how much that lip changed the look of the car. I’ve never seen a lip like that on a Fox body. Looks👌🏽🔥🔥🔥🔥🔥
The grille is the 93 cobra front grill, definitely a must have and easy to install
Im a firm believer of “if it looks good on the car, it shouldnt be an issue”. Prime example is putting the big wing on a WRX. It fits perfectly and looks good. Doesnt mean you are trying to make it look like an STi, just a nice WRX with a factory style spoiler
people who hated foxbody are the youngers. foxbody looks really cool and I think it aged really well on these gen of mustang
LOVE THE FOX BODY. AND THANKS FOR THE MUSTANG WEEK SHIRT YOU SIGNED FOR ME. JOE
You have one of the best looking fox body's I've ever seen. that lip enhanced the look a lot. Looks completely custom, but in the best way possible. I'm not a purist like some of the other fox body fans who need to have their car exactly original. To me the point of the platform is to make the car YOURS and customize it to your liking. You're lucky to have such awesome vehicles to drive.
93 cobra grille is the one your talking about looks killer!!
That is actually a really nice addition to the fox. I have never really seen one with a lip, but that one is very fitting.
One of the nicest body styles Ford ever did
93 Cobra grille insert is what you are talking about. I installed one on my GT years ago. Looks good with the Cervini cowl hood.
Put the Ford emblem back on black stud
Well it’s different for sure and doesn’t look bad.. even to someone like me that likes it stock. Now take a hammer to those headlights.
the heads are fine, screw off lol
Not controversial at all. If Makers produced a splitter for Cervini's Stalker bumper cover, I'd buy one in a heartbeat.
She is so clean a reckon a new exhaust and it will amazing looking forward to seeing more of the fox
Why you sold the other fox body ? And bought a done one ?
bro i saw a fox body and i felt blessed that thing was so loud and was super sick in general
That chin spoiler looks sick af bro. Goes hard
First time i seen a front lip on a foxbody! Very nice like it!
So are you planning on doing some engine work? Thing would sound nasty with a 274 comp cam
I would have mounted it the exact same way.
And I think the grill you are asking about is the Cobra front bumper. Its molded to have the grill.
LS swaps are the most controversial modification for sure. Love the fox content!
Omg thank you! I see that and look the other way
I want to put a k20/24 in a fox 😂 might be worse than LS swap
Car is lookin good with that front lip
It’s the cobra grill insert you’re looking for and you can find it on LMR. Car looks great. The 5.0 badges are in the totally wrong spot, LMR has a placement stencil!!
I like the chin spoiler! All mustangs and dodges look better with the front lip. I like the yellow protective covers they put on the challengers and chargers too
There’s a factory insert in the center for the Ford emblem, but it was filled in by a previous owner, wouldn’t be hard to get back, but may have to re-spray the bumper if not the whole car
That looks great and i dont have an issue with your installation. If the "proper" way was screwless and didnt involve drilling into the body then i might feel different but either way you were going to have to drill into it. I think it looks awesome.
I personally liked it better before, but it's your ride! Make it your own 👌
Derrick those are lx front bumpers with the ford emblem and the other are cobra if you wanted the pony logo. The gt’s have the ford but no cut out. Hope it helps 👍🏾
That’s a no for me dog. Hey to each there own though. You do you.
You can buy cobra bumper inserts that have the slot with the ford badge but you have to cut up your original bumper
You have to cut away the top of your front bumper. You can buy a cobra grill insert that comes with a paper template to cut around. Pretty easy to do.
Excellent chin strap choice! Gonna try and find one of these for my 2000 Mustang 3.8L. Loved the before and after comparisons. Thank you!
For the cobra grille insert you just cut a hole in the stock bumper and it just slides in.
Looks good! Always wondered why more people didn’t do this back in the day. Ya I’m old…
They are super expensive and nobody really makes them. You also have to get the air dam for the earlier models. I also feel it has a ground effect so they throw it off a bit
This man ripped the bag of hardware instead of opening it 😂😂 love your vids
The cobra grille insert will allow you to have that whole
Looks really Awesome!!!!
Someone removed your FORD oval emblem and filled it flush.
I am running a COBRA GRILL INSERT with the PONY
Looks good. Great job installing it. Now boost it!
The Fox is looking so good!
I think I would have used nylon push rivets instead of screws. Easier to install and uninstall, will hold just as good but no worries of stripping and won’t cause you to have flat if one works it’s way out and ends up in one of your tires.
The bumper with a hole is the lx bumper, or the svt cobra bumper
Looks so good! A lot more aggressive
That open grill is a Cobra insert, super easy to do
Love the lip...but wondering if there is a cheaper option...the side skirts are very affordable, but the front lip is soooooooo expensive...
I believe you are referring to the 93 cobra grille insert
Looks fantastic Derek, can't wait to see the new lights. 😎👍
Nice bro, looks great
Love it bro 🔥
Derek definitely loves his plastic mods
Must be nice another Free part to make you car look good
I like it man. Might have to cop 1.
Looks so Dope!!!
The hole on the front is a cobra front bumper. You can buy the whole front bumper or I belive LMR sells a kit where you can convert the gt bumper but you gotta cut into it.
Correction you can not buy the whole bumper
That was a tasteful mod!
I think the new modification in the new Foxbody is kind of ok 💙💙💙
So knowing that you are a New Edge guy at heart does anyone make a chin spoiler like this for the new edge? Anything other than the same Mach 1 spoiler that everyone has?
I agree the open grille would look better. Love the new lip bro!! Fox is looking great!!
Looks like Jesses Jetta from F&F now 😂
That's a nice looking lip. Looks great.. But the front grill is open on the stock bumper.. That's an aftermarket for sure. But it looks good also.
Love the look with the spoiler. I would have sprayed the screw heads black before I installed them. Overall a great install.
Does it have any performance value? Do you notice more stable at higher speeds?
Wondering which low profile floor jack do you have?
My magic drift chin spoiler didn't have instructions 😂
My 1.5ton harbor freight jack never goes down that smooth on my S550 🥲 might have to get a 2 ton or check the oil on mine.
Was this the Ford mustang deluxe that you did the front end swap?
now deek been can use it to plow the streets in the winter
I think I would of love to seen that splitter in a dark grey like modern cars or nascar, so that it separates the fact that it us 2 piece instead if one, or a matte grey
Wow, I have never seen a lip on a foxbody, but damn does it make it look nice
Wow I didn't know if I was going to like it or not damn it does look good put the headlights in there you're going to give it a clean look
Shouting out from Va Beach, sweet ride.
I also have a 88 fox with a 393 and I have the cobra bumper and the insert which allowed me to put the ping emblem there and yes it’s open So I. Order to do that you need to get the number and the insert
The stands on it it’s perfect
Looks amazing man loving the build
That's freaking sweet
It looks great, great job.
Cobra grill insert you cut a hole in the grill of your gt bumper and the cobra grill insert will cover the cut marks you made
You think the lip would fit on the 1982?
@DerekBaranProductions what package did u go with your sve wheels? the 19x10 all around or the 19x11/19x10, thanks in advance
how do you get away with not having a front plate on bluecifer in VA? im moving to va but i dont want to put it on my front bumper lol
To me it looks like that's what it should have come from the factory like that
Or better yet, do they offer the Mach 1 70.00 dollar chin lip for 87 LX ?
It must certainly did spice up front end
I did my version of a lip like Porsche gt3 rs 2019 on my 93 mustang with home depot door sweep if looks amazing as another youtuber did on his newer mustang
Looks dope man.
You asked if we hate the foxbody mustang build . No . Any mustang build is worth showing. But there are so many 3 valve owners out there . They need their time as well on your channel. Came across a Kenne Bell 3 valve mustang that that was 800 + to wheels with just bottom end forging and bigger injectors and fuel pump. No headers, cams, etc.
Some Rice with the fox 🦊 🍚
you should get hood clips. i think it looks sick
bro that is insane that front end of the fox is just absolute sex love it
It looks so damn good. I am definitely getting one for my white fox.
I was kinda sceptical when you mentioned that lip, dont think I've seen a fox around my area with it, but I think it looks good. I saw a black GT like yours on FB the other day with the terminator wheels, cowl hood & cobra grill &i it looked sweet.
Looks great! Go with a 93 cobra grille! That would be awesome with the new lip.
Is that the original front clip?
Looks awesome 👏
The stock gt mustang dont have the inserts the cobras did you just need to buy the insert and dremmel it out
Nicely done.