Custom Welding Cart Made From Scrap
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- I needed a welding cart to tag along with the table I built, so here it is. Made from scrap metal and other various pieces of unused junk I had around. I did buy the wheels though.
Check out my workbench\ welding table build here:
• How to build a basic w...
Mike manmade
I have to make a cart for my Hobart 210 MVP. This is a great example of keeping it simple. Nice job. I'd be much worse off with the stick welds myself. lol. My welder is pretty heavy, and nearly the same size as yours, if not the same case. Thinking bigger wheels in case I want to drag it over soil, or the lawn. Thanks for the video!
Nice job
I intended to build a cart out of the same material but I found an old trolley that was perfect and only needed a few small modifications for my needs, saved me a heap of time and turned out better than what I originally had in mind
nice work on the table and cart. you should fab up a tray or trays for the bottom of your table for storage and add hangers on the side of the cart for the whips and leads of your welders
Awesome job. I need both, table and cart for mig and stick welder. You gave me great ideas. Thanks.
good job. Gotta learn now to cut corners like you did with a wood stick in the middle.
good job with the simple design as well as the use of stick to weld it up.
nice job there Mike. 6013s are notorious for trapping slag, so don't beat yourself up too much. Cheers.
Greetings! Thanks for your comments!
Dang Good job Mike. I really like
Awesome build. Really inspiring.
Nice job on Both your welding table And your cart!
Good job. A well done for going with the stick welder for most of the fab, the only way to learn it, is to use it.
I don't do very well with a stick myself,and your welds look good enough for the job..Love the Cart,Good Job.!!..
great build
Your welds look good to me.....Great project......Tanks
Nice job Mike! You may want to add some large hooks for cables but other than that it looks great. And don't feel bad about not being an awesome stick welder few are it's a lot more difficult than mig since the distance of of your hand to your work is changing constantly.
Another good job ! Enjoying your videos!
Nice build I have to make one for my lincoln 180 dual I just got for Christmas but the problem is I only have a 10×20' garage with two work benches so i dont have much room so I may have to just build a stationary mount off the wall .. great job cheers
Nice job
Awesome job
nicely done.
Nice job!!
Clamps on you're welding table will free up welder accessibility on this cart.
great job im going to build mine the same thanks
Brilliant video most entertaining
First thing I made with my everlast welder was a cart for it!
Нормально. Остальные делают мегатрактора, а не тележки. На металле разоришься и пупок надорвешь.Good job. 👍
good job
Some J hooks to hang power/ground/torch cords on would be a good edition
First thing that should be made is a nice cart for the welder. I'll be needing on for my everlast welder but I just need to figure out the design.
Great job sir. i will do like this.
Great job! :)
I like it!
Nice!
Good work, nice and simple.
Do you think it's a bit top heavy?
Thanks.
I’m no expert on smaw but to me it seems you need more heat and a tighter arc if that don’t work maybe slow down a bit
Not to mention to clean the metal before you weld. Rust will give you shitty welds Everytime.
would it be cheaper to buy a cart?
I'm new to welding but not to building stuff with tools. I just bought my first welder an Eastwood MIG 135/110 for 250. I've used my buddies same welder and it worked great on some floor patch panels for my 68C20 truck. Great video. Do you have the dimensions? First project will be this cart.
NICE NICE 👏👏👏👏👍‼️
Good job!!!
What size is your Hobart Welder? I could not see it in video clip.
where in the world you pick up a scrap for free? here in Houston we even have to pay for rusty junk scrap by the pound.
No kidding, that is not scrap where we live. It is like gold up here in Canada.
I like good disaign did YOU know how much money cost to you thanks
Are you wearing TIG gloves to stick weld? you might want to buy thicker gloves
расход спецодежды... свитер в день)))
really nice work you do mike, but you need to adjust your heat onthe welder a higher
Hi Mike sweet cart! Lets us know if we can help out with anything for your shop!
Hi, very good, the cart! Could you tell me the measurements of the iron angle you used? Thanks and greetings from Argentina
He literally gave the measurements in the first 45 seconds of the video. It's 1.25 inch x 1.25 inch x 1/8 inch.
What size plate ? For table.... ar400 ?
What chop saw is that? Is that a harbor freight with an evolution blade?
nice work. but why not paint the underside? that feels like a half ass done job
Please share the specs and design for the cart.
Wha t color & brand of paint did you use
Good use for an old hollywood bedframe just going to waste
bums me out to see the little hobart welder just like the won a junkee stole from me best part is he died of an O D last year just dident do it fast enuff !!!!
1
could some one sell these and make money off of this ??
run some 7018 or 6010 thats all i use.
I think I will learn to use 7018 next.
They definitely weld quite differently from each other. I remember the first time I welded with 7018 when I first got my Everlast welder. I couldn't believe how quickly it burned.
Guinelle1 pree.
i love your content, but it is a real struggle to watch your videos because you show a lot of welding in the videos and my eyes hurt and then eventually a headache. if a welding lens is a possibility for you i would suggest it. other wise love the content and keep having fun.
You can't get any eye damage from watching a welding video...... You might have some form of epilepsy or similar though, check with a Dr.
Awesome job