GEVARM AS A PISTOL. NON SHOOTING MODEL. COMPLETE DISASSEMBLY, PARTS, MATERIALS
ฝัง
- เผยแพร่เมื่อ 16 ธ.ค. 2023
- Part 2 of the GEVARM PISTOL.
NO BLUE PRINTS OR SALE OFFERS OF ANY KIND.
ONLY SHARE FREE IDEAS.
For the starters. I hate welding. Love fastening. More mechanically challenging and demanding I think.
More joy for me.
Everything here is simple hardware materials. An thick wall aluminum tube ( don,t remember how I got it) happened to fit the Gevarm bolt nicely. That had triggered my creative fit.
Another piece of luck- spacer for the plug fits well and a ‘rice burner’ clip-on bar telescoped inside the receiver making a fake barrel.
The only serous ‘machining’ done with a drill press, an angular grinder and files: the handgrip/ rear plug bracket . I had some used and holed up piece of I think 3/8 aluminum, an old motorcycle brake bracket …
The thumb screws for sights just a joke….I might do something nicer.
The aluminum cover on the trigger group keeps the pins from potentially loosening out.
Important piece, the mag shroud/ ejector. Genius design by Gevarm a d Voere. 1) it sends rounds perfectly to the barrel. Never misdeeds. 2) deflects used shells as an ejector. They have no room to get stuck.
In the Voere case- ejects more robustly due to the sharp left corner.
I wish I was allowed to finish it, but I have to stop here… it was fun.
I might consider an interesting and aesthetic collapsing wire stock….
Thanks. Enjoy.
Your work is brilliant. Engineer and build more and even better designs. Go Well Sir.
Many thanks
РЕСПЕКТ !!!! Гарна робота ... Просто та ефективно !!!!
Дякую
This is too cool man I love your design.
TY VERY MUCH
Nice work!
Thanks!
Very cool, wish we could get the designs. Unfortunately governments don't want us to have these...
I know. Thanks for the understanding. I don,t draw designs, I improvise. The most I could do is a napkin sketch of a detail.
I have fun creating mechanical things within legal limits. If it was safe and permissible, I would be more than glad to draw and share the detailed designs. But nobody can stop exchange of the free thinking. People can emulate by simply looking on the things. I do.
@@STEINBVGj'y
Thanks
Nice share 😍
Thanks
довольно таки хорошо получилось. спасибо за обзор
you're welcome
Ótimo seu trabalho
Thanks
beautiful
Thanks
Not sure if you're in the US, but if you are, that would be totally legal to build your own gun.
Federally yes. Not in my state though.
Mantap
THANKS
What is the inner diameter of your magazine front round part , I mean the side where front projectile of bullet rests in magazine rests after feeding. So that I can make my spring manually. Or please can you just tell the outer diameter of spring which can be used in that round part of magazine. Just like ruger's mag.
That round area varies in different mags from this .340” in my Gevarm to .440 “ in my Voere
Cool model!
Is it based on anything, or all your idea?
See all 3 videos about it. It,s my makeover of Gevarm rifle
@@STEINBVG ahhh i see..
Nice! ;)
Весьма остроумно 😎👍и качественно.
THANKS
❤
THANKS
👍👍👍
TY
how long is the upper and lower pieces
Watch this. Might be the answer:th-cam.com/video/yVo7QwvcZyc/w-d-xo.htmlsi=F0M2-X5jzIQrsl7T
How to order your gun sir i hope your answer of my Question thank you.
Not for sale
Not a normal ar15 grip, anyone else notice it missing the hole for the safety detent spring?
Strange. I have not noticed. Bought it in a local gun shop. ~ $15.
En que metal se puede crear una belleza asi ?
Gevarm FCG is steel, the lover received that holds it - aluminum
And video with trigger? Thank you
See other videos on the channel. But this is what you are looking for :th-cam.com/video/xC3kR0KyYTc/w-d-xo.htmlsi=aWixPL-PhkKGKepO.
Вес затвора играет важную роль... Интересно сколько весит затвор?
@@TaezhnyRoman затвор Жеварма ~ 150 грам+ довесок/ направляющая пружины ~ 50 грам. Обычно стоит вместе в затвором. Но для слабых типа субсоник патронов переставляется назад и облегчает затвор
@@STEINBVG Спасибо!
Not a bad model but a guide over the mag could help feed the bullet into chamber
It feeds perfectly like Gevarm and Voere as the system is copied. The shroud forces the rounds into the chamber without any hesitation or misfeed.
Thanks
Top de mas que foi presenteia um escrito com uma tô aqui em
Thank you
Добрый вечер, друг, у тебя есть PDF?
Не рисую даже на салфетке. Делаю навскидку. Но не на продажу. . Спасибо за визит
I assume that you have a milling machine?
Just drill press and grinder
You have my respect
Can you make a detailed video about gun making?
There are a couple of videos. As detailed as I can offer.
@@STEINBVG I would be very happy, can you share it?
I do not offer detailed plans. Only what you see is in the videos
Я хотел бы сделать из нержавейки Пистолет Пулемёт Безручко-Высоцкого который не был принят советской военной комисией и не пошёл в серию и на фронт , но имено по нему был создан ППС-43
Не знал об этом ПП. Да, похож на ППС. Но ‘изобретая’ простейший свободно затворный автомат трудно быть оригинальным.
В итоге все упирается в дешевизну, качество , надежность и простоту обслуживания …
@@STEINBVG Я хочу сделать этот ПП не из тоненькой нержавейки, а Из толстой 4-5 миллиметров да он будет тяжелее зато надёжнее
1.5-2 mm я думаю более чем достаточно. У этого ПП штампованный корпус. 4-5 мм не согнешь. А в домашних условиях проще строить ПП как у Лути- из стандартных труб подходящего размера.
Put the plans on the Internet.Lots of us would build it.
I would gladly , but there might be legality issues I don,t want to touch with a 10 ft stick.
Один из любимых авторов.
Спасибо большое
ถ้าเพื่อการศึกษาเพื่อความรู้อยากได้ขนาดพิมพ์เขียว😊 engineer มืออาชีพ
What you see is what you get. Watch all the videos
Seria possível conseguir o projeto?
Watch all the videos and learn from that.
В хозяйстве пригодится ..
Еще бы
Do you have any for sell
No. I don,t sell. Just share the ideas
ผมอยากได้ขนาดพิมพ์เขียว
No blue prints
Tôi muốn mua sản phẩm này của bạn
not for sale
❤❤❤❤❤❤❤❤❤❤❤❤❤
Thanks
Милый человек а где ж розмеры найти на такую игрушку?
К сожалению я не предоставляю планы, детали или полные модели. Просто делюсь идеями. За это пока не сажают…
@@STEINBVG да в наше время, слава Богу хоть за это не сажают... тут Вы правы.
Есть идея как патроны изготовить в товарных количествах?@@STEINBVG
А что, даже линейными не поделитесь? Банально, длина -ширина, да диаметр трубки, с толщиной стенок, на ресивер.
@@STEINBVG
Не мерял, но могу померять
In the words of branding al guy harerra “Hungarian trash blaster”
I guess. For now I call it a’ paper weight’
Gostaria de comprar um kit desse ai
I don,t sell kits or provide plans. I give away the ideas. Thanks
Всё оригинальное просто но почему не показал как стреляет?
Показал. В видео о фабричном Gevarm. Этот передел makeover , если бы было легально и он стрелял, вел бы себя точно также. Во всяком случае так все было рассчитано . В нем нет реального ствола- так что увы!
The Sten has been repeated since WW2 in various forms. The Sweeds with their Interdynamics 9mm ala Tec 9 to the Sumoi 9mm. Its robust, simple, and quite the contrary, yes, reliable.
Thanks for the info
Akshully, the tec9 ISNT that realiable, unless its being used in Miami Vice
I don,t know why Tec 9 is even mentioned. It,s closed bolt striker operated semi or select fire gun. Most of famose ww2 guns were open bolt simplicities. Similar to my Gevarm. The only difference between them was semiautomatic fire control group. Gevarm came up with 2 parts 2 springs fire control group. My single shot has 2 parts 1 spring group. My Uru has 1 part 1 spring group for semi auto fire. You can,t get any simpler than that.
@@STEINBVG i can see that all those legenary tube designs are just a pen gun with a grip attached.
The hardest part will always be making the 90 degree connections without a welder.
(Magazine well to frame).
Another tough connection is figguring out a trunion to connect a threaded barrel to a rivited reciever.
@@STEINBVG look up "original flyshooter"
Youll understand ;)
Самопал? 👍
С частями моей французской винтовки
ราคาเท้าไรแพงไหม
I AM NOT SURE OF THE QUESTION
Сделать просто очень сложно.
Для большинства- да. Для рукастых и головастых- нет
pdf desing plz
Not available
En mi país las hacen así en calibre 22lr o shorts y por lo común las usan pandilleros
Pity. Ruin fun for everybody.
Este tiene parquimson xd
Ok
Луча покажй как стриляетца а не разабрат?
Не стреляющая модель.
Too mini
Ok
Esse cara tá sendo forçado e fornece essas informações tão precisas ele está remendo.....😅😅😅😅😅😅
What are you talking about ?
Can i buy one sir
sorry. don't sell plans, parts or guns. just share the ideas
Почему так нравится оружие, вроде не убийца?
ZZZZZZZZZZZZZZZZZZ
มีฝีมือแต่นี้เองเหรอ
YES