Open bolt is such a simple design. This one looks to be very well built even if it is non functional. Good work on making it as well as you did. Time and effort pay off. 👍
Sir , I've been studying on how to make rifle and specialy 12 gauge 6x revolving action and also if I can revolving 20x 12 gauge cartridges, to protect my family for whenever will be time now I have to tell you that you are extremely talented and your work is very professional if I only could do something that could resemble a little bit to what you can do I would be very proud I think that your work is by far the best that I ever saw I know that of course these fires arms are model toy's like you project them "I hunderstand that u have to protect yourself from any accidents " but I huderstand the principle so all that to say that your work is masterpiece, respect to you
Thank you. You understand correctly. You can learn a lot from watching videos on channels like mine. And reading descriptions/ comments. That,s how I have learned and still learn. Good luck.
@STEINBVG thank you sir honestly I truly thought that you were army fire arm's specialist or professional gunsmith, one thing is for sure is that I won't be able to produce the same quality that you deliver but like I said I will study all your videos and try to produce at least a safe working fire arm for protection I have so many project that I won't live long enough to achieve everything but doing a fire arm is.now my priorities thank you for your videos. i noticed that your videos are well detailed and easy to follow so again frome a Jak of all trades, inventer of all sorts respect to you.
Наконец-то, хоть один русский человек сделал не ебаный обрубок дерева с медной трубкой обмотанный изолентой , а что-то реально класное. Спасибо за идею , не против если возьму за основу? Конкуренцию создавать не буду))
Thanks. Unfortunately - not that many comments. Thus not difficult to answer. I wish people were more curious and participated in the discussions more and constructively. Perhaps when there are more hard core subscribers….
Looks really solid and well designed. Just that sharp tip of that nail looks pretty dengerous for shooter's forearm. I'd be little worried about it if i was using it.
Thanks, not sure though what you referring to, but many complained about the spring guide protruding from the back . I have fixed that, see my last video. Now the spring and guide are internal,and clean .Watchth-cam.com/video/0NYM32PAxQ8/w-d-xo.html
I suppose you could, with the help of the exposed nut from the back of the gun, attach a stock with another nut screw, and make a grooved barrel extension with another big, long bolt to be attached to the end on the barrel? Maybe even add a handguard?
Весьма интересная конструкция П/П со свободным затвором! Сразу же видны простота и технологичность. Однако, недостаток конструкции это выходящая из ствольной коробки направляюшая при откате затвора в крайнее заднее положение. Поскольку из-за этого при стрельбе возникает риск травмирования стрелка при отсутствии плечевого упора.
Все правильно . Это временный компромисс. У оригинального Уру, как и у ППС43 пружина тонкая на направляющей и проходит сбоку( ППС) или сверху(Уру) затвора избегая контакта с УСМ. Я вначале хотел проще, пружину диаметра на всю коробку, как у Стена или других простейших ПП. Но из-за специфики УСМ подобного УРУ , пружина тормозилась шепталом одиночного огня( задний бугорок) и пришлось уменьшить диаметр пружины и поместить ее на направляющую- которая выходит наружу. Я собираюсь переделать аналогично ППС, но чтоб ручка затвора держала направляющую и тонкую пружину. Нет времени пока да и желания…
Thanks. I had to stop at some point. It looks almost complete, but it,s just a paper weight. To make something like this work , there would be much more to do. It,s just a Concept, made of crappy common materials.
Приветствую Виталий, с наступающим Новым годом вас!🎉 Виталий, не совсем понимаю работу спускового механизма, не могли бы вы в следующем видео поподробнее показать спуск? Как я понял он имеет и авто, и одиночный принцип работы, буду благодарен😉
Спасибо дружище. Вас также. Посмотрите все мои видео на канале об этом ПП. В первом эпизоде я дал ссылку на 2 видео показывающие механизм и стрельбу реального бразильского УРУ 9мм. Я скопировал УСУ в точности. В двух словах на курке 2 бугра- передний - боевой взвод, задний- разъединительный который ловит затвор на откате при нажатом пальце- отпустив курок затвор соскакивает ~ 10 mm вперёд на взводной бугор. Это одиночными. При очередями- переключатель огня опускает задний бугор ниже затвора. Тот продолжает туда сюда пока не отпустишь или патроны закончатся. Все это видно в моих и чужих видео. Помните, это открытый затвор, самый простой- фиксированный боёк на его передней части: поднял патрон и загоняя его а ствол- пробил капсюль . th-cam.com/video/YYYm3hTK1_U/w-d-xo.html
@@yilmazbozkurt6952are you asking what is the diameter of the drop in trigger pin and selector switch? They both started as 7/16”. If you asking how many pins holding everything together- 3: 1) trigger pin, 2) selector switch3 ) rear plunger that locks upper and lower receivers. I don,t count 2 little screws that hold the trigger flat spring and the bolt that holds the pistol grip.
Thanks . Not sure what you mean by an upper assembly. It does have all the parts , upper and lower . Minus the barrel and trunnion . That,s where I drew the line in the sand. As is it remains a fidget for a 50+ y.o. nerd. Or a fancy paper weight.
Not much of specific forearm work. However- try to hold weights w/o wraps when do back exercises, changing grips: palms up or down. And also do reverse or hammer biceps curls to focus on forearms
У нас тоже подтягивают гайки : от штата к штату варьирует интенсивность антиконституционного террора против оружия …хотя такой пистолет легально построить во многих юрисдикциях… Народ легко строит модульное оружие- AR15, SIG, GLOCK и другие, но куча ограничений , закалебаешься регистрировать. Свободный затвор и магазин как намёк на конверсию в автомат- забудь
Love you builds ! I was wondering is there a link you can send me for the template for that trigger / spring steel pressure pushing the sear catch back up, did you do any plans for these builds If you did I’d love to make a non firing uru sub machine gun dummy
Thanks. I build improvisationally. Never make blue prints. If you watch many of my videos- it,s clear. I do not hands-on teach. Capable mechanics can decypher the builds just by looking.
Yes, it was improvisational and built using existing plumbing parts and their standard measurements. For instance 1/2” x 8” threaded steel plumbing nipple for the receiver. Th end cap, trunnion ( if I were to make one) are simply corresponding 1/2” threaded fittings. Thanks for watching. This project if you watch all the videos is not a difficult to emulate without any plans, if one has mechanical inclination and skills.
Ha ha. Yes. By accident in the editing. Pushed the wrong button . By the time I noticed it was too late. I was wandering if somebody would comment. Thanks . PS. Russians wear rings on the right hand by the way. I used to…
@@STEINBVG Flipped mirror would account for a right handed person holding a gun left handed but it doesn't change a right hand thread into a left hand thread or does it? I may have to screw a nut and bolt together in front of a mirror to see. I figured you just used a propane fitting you had laying around but that still would have required a left hand die to thread the back of the reciever. They do make and sell left hand taps and dies but you probably won't be buying one at a local hardware store. I have watched the Forgotten Weapons video on this sub-gun and prefer the original recoil spring design.
Здравия, Виталий! Не подскажите, какие станки использовали? Меж тем, будет интересно посмотреть как устроен "dummy " Магазин. Или он прям совсем обычный кусок металла?
Спасибо. Все сделано как говорится на коленке. Использовал болгарку, сверлильный станок, дремел, напильники, наждак. размерны исходных метериалов в американском стандарте подходили друг к другу без нужды токарить. Магазин строить нет смысла и очень непросто - многие профессиональные компании использовали уже существующие доведенные и чужие магазины- от этого зависела надежность. Я использовал магазин от винтовки Хеклер-Кох 270( культовая штука) th-cam.com/video/599loNLRyrY/w-d-xo.html
For those who are talented and creative- my videos are sufficiently instructional. Somehow I believe those are good people. Although indeed there are evil geniuses out there too… But I don,t want to walk the wrong , miserable and resentful people step by step…to their evil goals….they can get there on their own. Thanks for your patronage…
@@STEINBVG was just gonna say that looks complected but for someone who's used to machining things it's very simple so no need to walk an idiot thru the process as there the wrong kind of people for this... Don't think you're average backyard machinist or metalworker is your type too actually use this in anger, more like mm I wonder if I can do that an doit just for the challenge.
All the materials are bought in a hardware store except the mag. I do not sell parts, complete items or offer plans. I give away just the ideas in sufficient details for a capable person to emulate. Thanks.
No you won,t . The damn thing just a fidget ….an interactive mechanical toy. I have enough things that shoot… and don,t cause problems. Thanks for the visit
Yes you are absolutely correct. My first video about it pays a special tribute to the original Brazilian 9 mm SMG. In my heart it takes 1t place amongst SMG due to it's insane simplicity.
Thanks. I give away my ideas for free- anybody welcome to use them if capable. I do not sell plans or completed creations …I don,t walk people step by step through the basics. In other words, don,t teach people how to play piano. I hope I show how to play jazz, to improvise…to do thing on the fly
Bud!I must say,one feller 2 the nuther,I can't thank you enuff fer these vids.sutch a perfict "go around"....fergit buyin when you should make yerown. Thanks.
No problem. Where,s fun in buying ? It,s like getting liposuction vs working your ass off in the gym- different level of joy and accomplishment ! Thanks
I build bikes and these models without any plans, by pure inspiration. See all the videos and read the descriptions , comments. If capable you will be able to build something like that. If not- I can not help you with more than just ideas. Thanks for watching
I do not offer blue prints or sell my creations. I give away the ideas. If crafty and handy, by watching all the videos on r(entropic and reading the descriptions and perhaps comments you will have enough info to emulate this. Thanks
Я очень люблю историю строения оружия и мотоциклов , первые попытки , шикарные находки начала 20 века, обаяние стимпанк. Поэтому мои поделки в этом стиле , а кроме того моя примитивная технология гармонично приводит к такой эстетике.Посмотрите мой бобер Rough’N’Raw- Грубый и Неотесанный. Я не очень люблю обсосанную аэродинамичную эстетику пластика… Спасибо за просмотр
@@ЧеловексВостока это уже сделано в следующих эпизодах а в последствии затвор переточен на внутренние пружину и направляющую. Как должно быть. А зачем ? Посмотри все что я делаю может будет понятнее
1) неполная разборка для чистки предполагает разбор верхней коробки, затвора, боевой пружины. Все нижнее остается нетронутым. Выкручивается задняя гайка и все. 2) всего 20 частей при разборке полностью. Покажите мне оружие где меньше??? И он разбираются без инструментов. 3) Бразильский Уру с которого делался этот образец считается самым простым ПП.
You must email me the pictures of you and the gun to the business email address listed for my TH-cam account - see under ‘ABOUT’ . I would be eternally grateful !!!
Hello, I would like if you could sell me the mold or the PDF if possible, I will be grateful, I am from Brazil, I liked your work here, we have difficulty buying or producing, the return could be right here, thank you.
Sorry, no. It,s been asked and answered many times. I do not give away blue prints or teach step by step. I share general ideas in mechanical and gun engineering. People with adequate skills in the area easily can emulate or copy my work by simply looking at videos and reading the descriptions. The information provided there is sufficient for them- capable , skillful and creative people who I believe won,t use them for evil. Nobody teaches me , but I watch and read. By the way, I have learned a lot from the guys in the Central and South America who a good at making guns from nothing and with minimal tooling. There are quite a few sites where they share their craft the same way I do. Good luck
@@coragem8154 Thank you very much my friend for being so kind to answer, I also do some things here for entertainment www.youtube.com/@pantanalselvagem.1061, but I tell you, you don't always know just by looking, without measurements it will have a great work to do, but thank you very much.
My homepage states that I do not offer blue prints or sell my creations. I share freely my ideas with likeminded individuals who, if capable, can use them and build similar projects. Watch all the clips and read the descriptions, it might be enough
I can appreciate good engineering/work...I left school with a city& guilds in carpentry but 1) your "gun" fits together well, but, isn't finished 2) doesn't work so, again why?
@@zivabrogan5807 Now , this deserves a longer answer: If you look at many of my videos, I'm a scholar of mechanics, period. I don;t care to even to ride my custom bikes,[ once I know they are mechanically sound and fully operationsl] or shoot guns[ I mean my modifications on legal registered weapons] ..The mechanical engineering of parts, solving mechanical puzzles, trouble shoot, invent, improvise is my passion. And guns are just an excellent media/ canvas/clay for the artistic self expression. But building' guns' from scratch- has legal restrictions and limitations. BTW, I can do wood work, but i'm too impatient and wood is not as forgiving as metal for my explosive character. Thanks for your visit See if you can enjoy my other videos[ I have no monetary interest, literally]
Got my firearms is license and started to work on guns since Covid. Couple of years, but I have a long track of mechanical skills. To be a diagnostician, trouble shooter as an MD disciplines thinking and helps too
I,m not sure what you,re looking at, but the brass nut that represents the barrel ( nonfunctional) is screwed on the front of upper ( round ) receiver which houses the bolt , main spring etc. The lower receiver, square tube , houses the fire control group and mag well/release. Watch other videos on the topic, it will be clearer. Thanks
Comprar uma provavelmente não porquê a Uru ja não é mais fabricada, mais nada te empede de ir montando uma aos poucos. Baixa a planta na internet, manda fazer as peças e vai montando em casa medmo. Eu tenho bvontade de faser isso mas o que eu quero montar é aquelas pistolas de pederneira, tipoma do piratas do caribe.
![VITALY STEINBERG, MD [Доктор Штейнберг]](http://yt3.ggpht.com/EqKIQMfGEayXp2PfDaOiWeWbQlrsablQxXQfGvahfNzpDSwpEV21osJ5oZ1C5vrDWaWm4_OHjA=s48-c-k-c0x00ffffff-no-rj)
nice solid parts..This dude knows what hes doing.
Thanks.
you Sir are a talented Engineer of great mechanical mind.
Thanks a lot...you should see me bake a cake)))
Open bolt is such a simple design. This one looks to be very well built even if it is non functional. Good work on making it as well as you did. Time and effort pay off. 👍
Glad you like it!
yes.
its perfectly functional. it just doesnt fire.
Yes. You got it.
how?@@nowstopwhining
Sir , I've been studying on how to make rifle and specialy 12 gauge 6x revolving action and also if I can revolving 20x 12 gauge cartridges, to protect my family for whenever will be time now I have to tell you that you are extremely talented and your work is very professional if I only could do something that could resemble a little bit to what you can do I would be very proud I think that your work is by far the best that I ever saw I know that of course these fires arms are model toy's like you project them "I hunderstand that u have to protect yourself from any accidents " but I huderstand the principle so all that to say that your work is masterpiece, respect to you
Thank you. You understand correctly.
You can learn a lot from watching videos on channels like mine. And reading descriptions/ comments. That,s how I have learned and still learn. Good luck.
@STEINBVG thank you sir honestly I truly thought that you were army fire arm's specialist or professional gunsmith, one thing is for sure is that I won't be able to produce the same quality that you deliver but like I said I will study all your videos and try to produce at least a safe working fire arm for protection I have so many project that I won't live long enough to achieve everything but doing a fire arm is.now my priorities thank you for your videos. i noticed that your videos are well detailed and easy to follow so again frome a Jak of all trades, inventer of all sorts respect to you.
The comment does not carry any semantic load, it serves to support the channel and gratitude to the Author.
@@amboss594 thanks
Наконец-то, хоть один русский человек сделал не ебаный обрубок дерева с медной трубкой обмотанный изолентой , а что-то реально класное. Спасибо за идею , не против если возьму за основу? Конкуренцию создавать не буду))
Не проблема. Дерзай! Поделись потом как вышло
Если он Русский, то наверное не в России живет.
@@ivan1982ize разве канал не показывает где я живу?
@@ivan1982ize какая разница где он живёт?
@@STEINBVG Да теперь понял, в США.
Absolutely phenomenal craftsmanship on display. What I would give to have a firing version of this thing. Great work!
Thanks. I would like to be able to complete, test and tune it…. Remember. It,s made of crappy hardware materials…just as a concept..
@@STEINBVG Crappy hardware materials can still send lead downrange till you get something better off a fallen combatant!
I guess
You are one hell of a gunsmith. Cheers
Thanks
You replied to every comment that is impressive.
Thanks. Unfortunately - not that many comments. Thus not difficult to answer. I wish people were more curious and participated in the discussions more and constructively. Perhaps when there are more hard core subscribers….
Una belleza
This is the best diy ive seen yet. Is this your own prototype?
@@jerekalvarez3527 I based this model on URU SMG. Here,s my 1t video th-cam.com/video/YYYm3hTK1_U/w-d-xo.htmlsi=GBf-JmI2AKVuKymd
Looks really solid and well designed. Just that sharp tip of that nail looks pretty dengerous for shooter's forearm. I'd be little worried about it if i was using it.
Thanks, not sure though what you referring to, but many complained about the spring guide protruding from the back . I have fixed that, see my last video. Now the spring and guide are internal,and clean .Watchth-cam.com/video/0NYM32PAxQ8/w-d-xo.html
I suppose you could, with the help of the exposed nut from the back of the gun, attach a stock with another nut screw, and make a grooved barrel extension with another big, long bolt to be attached to the end on the barrel?
Maybe even add a handguard?
See other videos, I have already done many of those modifications.
My question is isn’t the barrel too small like the bullet could not pick any velocity
There,s no barrel.
Весьма интересная конструкция П/П со свободным затвором! Сразу же видны простота и технологичность.
Однако, недостаток конструкции это выходящая из ствольной коробки направляюшая при откате затвора в крайнее заднее положение. Поскольку из-за этого при стрельбе возникает риск травмирования стрелка при отсутствии плечевого упора.
Все правильно . Это временный компромисс.
У оригинального Уру, как и у ППС43 пружина тонкая на направляющей и проходит сбоку( ППС) или сверху(Уру) затвора избегая контакта с УСМ. Я вначале хотел проще, пружину диаметра на всю коробку, как у Стена или других простейших ПП. Но из-за специфики УСМ подобного УРУ , пружина тормозилась шепталом одиночного огня( задний бугорок) и пришлось уменьшить диаметр пружины и поместить ее на направляющую- которая выходит наружу.
Я собираюсь переделать аналогично ППС, но чтоб ручка затвора держала направляющую и тонкую пружину. Нет времени пока да и желания…
@@STEINBVGталантливый ты тип, держись подальше от ментов! 👍👋
Спасибо. Так и делаю- живу в США.
77% лишнего, избыточные узлы и навороченные в технологической сложности изготовления детали
Перечисли что бы ты убрал лишнего?????
you would definitely survive an apocalypse
I hope don ,t have to…
@@STEINBVGwhat you talking about? An Apocalypse is amazing😅
❤@@STEINBVG
You forgetting that there's also other "him" with diferent agenda out there .
??
Muito bom seu trabalho isso sim é uma máquina indestrutível
Thanks a lot.
I’d say very close to being functional . Good work my brother in arms and freedom .
Thanks. I had to stop at some point. It looks almost complete, but it,s just a paper weight. To make something like this work , there would be much more to do. It,s just a Concept, made of crappy common materials.
Приветствую Виталий, с наступающим Новым годом вас!🎉
Виталий, не совсем понимаю работу спускового механизма, не могли бы вы в следующем видео поподробнее показать спуск? Как я понял он имеет и авто, и одиночный принцип работы, буду благодарен😉
Спасибо дружище. Вас также.
Посмотрите все мои видео на канале об этом ПП. В первом эпизоде я дал ссылку на 2 видео показывающие механизм и стрельбу реального бразильского УРУ 9мм. Я скопировал УСУ в точности. В двух словах на курке 2 бугра- передний - боевой взвод, задний- разъединительный который ловит затвор на откате при нажатом пальце- отпустив курок затвор соскакивает ~ 10 mm вперёд на взводной бугор. Это одиночными. При очередями- переключатель огня опускает задний бугор ниже затвора. Тот продолжает туда сюда пока не отпустишь или патроны закончатся. Все это видно в моих и чужих видео.
Помните, это открытый затвор, самый простой- фиксированный боёк на его передней части: поднял патрон и загоняя его а ствол- пробил капсюль .
th-cam.com/video/YYYm3hTK1_U/w-d-xo.html
O borular ve mekanizma çapı kaç iğne sabit mi
@@STEINBVG принял, благодарю🙏🏻😉
@@yilmazbozkurt6952are you asking what is the diameter of the drop in trigger pin and selector switch? They both started as 7/16”. If you asking how many pins holding everything together- 3: 1) trigger pin, 2) selector switch3 ) rear plunger that locks upper and lower receivers.
I don,t count 2 little screws that hold the trigger flat spring and the bolt that holds the pistol grip.
The Forgotten Weapons channel on TH-cam has a video of how this trigger functions. Look up his video on the Brazilian gun this is modeled after.
Ah yes, now it needs an upper assembly and a form of food supply yes. Beautiful work, articulate and well executed.
Thanks . Not sure what you mean by an upper assembly. It does have all the parts , upper and lower . Minus the barrel and trunnion .
That,s where I drew the line in the sand. As is it remains a fidget for a 50+ y.o. nerd. Or a fancy paper weight.
What forearm workouts do you do
Not much of specific forearm work. However- try to hold weights w/o wraps when do back exercises, changing grips: palms up or down. And also do reverse or hammer biceps curls to focus on forearms
Just commented a few minutes ago wanting to add that you should try to make a the luty 9mm smg you have some great quality dude
Thanks again. I will think about it.
Just found your channel 👍
Is that a budgie talking in the background 😂
Thanks. Yes, 2 of them. My critical supervisors
У нас тюремный срок за такие поделки дают... А то мы были бы коллегами... ✊Классная машинка получается..
У нас тоже подтягивают гайки : от штата к штату варьирует интенсивность антиконституционного террора против оружия …хотя такой пистолет легально построить во многих юрисдикциях…
Народ легко строит модульное оружие- AR15, SIG, GLOCK и другие, но куча ограничений , закалебаешься регистрировать. Свободный затвор и магазин как намёк на конверсию в автомат- забудь
У вас там, распечатывают на 3д приниерах много интересных вещей !
Подписался
@@ВольноеСердце Да, 3д популярны, я раздумываю об этом и сканере.
Но нужно также освоить CAD...
@@ВольноеСердце thanks
Love you builds ! I was wondering is there a link you can send me for the template for that trigger / spring steel pressure pushing the sear catch back up, did you do any plans for these builds If you did I’d love to make a non firing uru sub machine gun dummy
Thanks. I build improvisationally. Never make blue prints. If you watch many of my videos- it,s clear. I do not hands-on teach. Capable mechanics can decypher the builds just by looking.
The build quality on this piece is quite good for a homebrew mechanism.
Thank you. You flatter me. I ,m not typically details obsessive or pedantic, and leave the finish of my bikes and guns Rough’N’Raw.
牛逼
@@cynricloyloy8953 THANKS A LOT
ช1เฝ.@STEINBVG
I believe you do awesome work I wish I had your knowledge your very intelligent love to have your skills thanks for sharing nice job 🎉
Thank you kindly!
Nice, l Like the toolless design, do you have prints ? Or is the build on the fly.
Yes, it was improvisational and built using existing plumbing parts and their standard measurements. For instance 1/2” x 8” threaded steel plumbing nipple for the receiver. Th end cap, trunnion ( if I were to make one) are simply corresponding 1/2” threaded fittings.
Thanks for watching. This project if you watch all the videos is not a difficult to emulate without any plans, if one has mechanical inclination and skills.
You, my friend, deserve my subscription
Glad to be your friend. Thanks.
Cool can u I know the dimensions of the parts
Watch other videos, read descriptions and comments. I believe it was mentioned
@STEINBVG alright the parts look simple and it looks awesome 👌
Thanks
Manque 1 canon rayé plus 1 chargeur, je suis sur que cela fonctionne.
Vous êtes un artiste.
Thanks
have you flipped the video ? ~ your ring is on the wrong finger and the spring retaining nut is reverse thred
Ha ha. Yes. By accident in the editing. Pushed the wrong button . By the time I noticed it was too late. I was wandering if somebody would comment. Thanks . PS. Russians wear rings on the right hand by the way. I used to…
@@STEINBVG Flipped mirror would account for a right handed person holding a gun left handed but it doesn't change a right hand thread into a left hand thread or does it?
I may have to screw a nut and bolt together in front of a mirror to see.
I figured you just used a propane fitting you had laying around but that still would have required a left hand die to thread the back of the reciever. They do make and sell left hand taps and dies but you probably won't be buying one at a local hardware store.
I have watched the Forgotten Weapons video on this sub-gun and prefer the original recoil spring design.
Very nice build! 🔥 also a big fan of the US palm grip.
THANKS A LOT
Mantap keren sekali kakak pistonya, semoga makin sukses Channelnya, salam kenal kakak
Thanks a lot
Здравия, Виталий! Не подскажите, какие станки использовали? Меж тем, будет интересно посмотреть как устроен "dummy " Магазин. Или он прям совсем обычный кусок металла?
Спасибо. Все сделано как говорится на коленке. Использовал болгарку, сверлильный станок, дремел, напильники, наждак.
размерны исходных метериалов в американском стандарте подходили друг к другу без нужды токарить.
Магазин строить нет смысла и очень непросто - многие профессиональные компании использовали уже существующие доведенные и чужие магазины- от этого зависела надежность.
Я использовал магазин от винтовки Хеклер-Кох 270( культовая штука)
th-cam.com/video/599loNLRyrY/w-d-xo.html
Cara que progeto legal,parabéns!pra qual calibre é que tu vai montar?
It was scaled as 22 LR.
Would you sell the manufacturing process, I'm interested?
Sorry, no.
have you considered making a guidebook on creating this beautiful machine?
For those who are talented and creative- my videos are sufficiently instructional. Somehow I believe those are good people. Although indeed there are evil geniuses out there too…
But I don,t want to walk the wrong , miserable and resentful people step by step…to their evil goals….they can get there on their own.
Thanks for your patronage…
@@STEINBVG was just gonna say that looks complected but for someone who's used to machining things it's very simple so no need to walk an idiot thru the process as there the wrong kind of people for this... Don't think you're average backyard machinist or metalworker is your type too actually use this in anger, more like mm I wonder if I can do that an doit just for the challenge.
@damafia29 my sentiments. If/when you do yours- i,m interested to see. Cheers
I’d make one but I’d go back to prison iff seen so ….
then don't...you have your priorities
Thank you sir for the knowledge 🎉❤😊
THANKS
I like how much is the parts for the hold thing
All the materials are bought in a hardware store except the mag. I do not sell parts, complete items or offer plans. I give away just the ideas in sufficient details for a capable person to emulate. Thanks.
Wow dude you are beast you create something that protects your house from intruder s
No this is just a toy, for my mechanical amusement . For protection I have real serious weapons. Thanks
Are you done already I don't even get to see if the damn thing really works ?
No you won,t . The damn thing just a fidget ….an interactive mechanical toy.
I have enough things that shoot… and don,t cause problems.
Thanks for the visit
that is BAD ASS!!!! DID YOU DESIGN IT OR DID YOU GO FROM A PRINT?
All the info in the vids and descriptions. Thanks
Si señor todo un artesano. Un saludo
Understood without translation. Thanks a lot
师傅，这是你自己做的吗
Yes. Using a video and pictures of the original BRAZILIAN URU submachine gun
@@STEINBVG I'm very interested in learning
Watch all the videos and read the descriptions and comments. You might be able to learn.
@@STEINBVG Thank you very much, you will be my first teacher
It's easy to get to the budgies here. Things get a little more complicated with the gun. 😂but interesting to see.
Thanks
uma verdadeira obra de arte técnica
Thanks
Queria saber como é feito a agulha que não vi
Fixed firing pin or rather ridge. Like this th-cam.com/video/yVo7QwvcZyc/w-d-xo.htmlsi=pLemQfZ2M4YFCcrB
@@STEINBVGagulha fica firme no carrinho?
@@demirdemmyr7679it is machined on the face of the bolt
A URU é um projeto brasileiro, se não me engano
Yes you are absolutely correct. My first video about it pays a special tribute to the original Brazilian 9 mm SMG. In my heart it takes 1t place amongst SMG due to it's insane simplicity.
what kind of ammo will it fire? .45? 9mm? .22?
Scaled for but doesn’t shoot 22
You are an artist man
THANK YOU
Uru é um projeto de Brasileiro de um sub metralhadora ou estou enganado?
AS IT SAYS IN THE TITLE, IT is based on URU , I have said it in my description of this 22 tribute. THANKS
I have one 9mm Uru used during the military government in Brazil. It’s in its original case.
@@dr.edsonhenrytakeipsiquiat3513 wow, would like to see that. That,s a marvel. Have you shot it? Is it good? Reliable? Controllable?
this is pretty nice, haven't you thought about selling it as a prop/collection gun?
Thanks. I give away my ideas for free- anybody welcome to use them if capable.
I do not sell plans or completed creations …I don,t walk people step by step through the basics. In other words, don,t teach people how to play piano. I hope I show how to play jazz, to improvise…to do thing on the fly
Bud!I must say,one feller 2 the nuther,I can't thank you enuff fer these vids.sutch a perfict "go around"....fergit buyin when you should make yerown. Thanks.
No problem. Where,s fun in buying ? It,s like getting liposuction vs working your ass off in the gym- different level of joy and accomplishment ! Thanks
THANK YOU FOR YOYR ART WORKS 💪 YEY" 🙏🏽'S☝️BLESSINGS GODBLESSESYOU ☝️
@@ShaneMease thank you
Can you share the que format or design?
There,s no plan or file. If capable, you have enough info in the videos…
Is it only can single shot?
Please, watch the video carefully and read the descriptions. Thanks
I like how the parrots are emulating the gun noises
They are 2 males and are my advisors and critics: I get louder- they get louder
@@STEINBVG 😂😂the best advisors ever
Little do we know, the birds are explaining the Build 😅
The louder I do something , the louder they go.
@@STEINBVG Poderia passar o gabarito do projeto com as medidas?
Isn't that a brazilian gun?
Yes, I used it as a model
@@STEINBVG very cool!
@@saooran7364 thank you
It's so small and cute 🥰
Thanks
I don’t get it. It looks like a handgun, but no barrel. No bolt. And if round fed from the mag, the bolt would not pick them up.
Read the descriptions and watch the other videos. Hopefully you will get it…
what is ss st
There is no ST. There were SA- semiauto, A-auto, and 2 safeties -S. Now there are only 3 positions: SA, A, AND S
Where can I get the plans ?
I build bikes and these models without any plans, by pure inspiration. See all the videos and read the descriptions , comments. If capable you will be able to build something like that. If not- I can not help you with more than just ideas. Thanks for watching
But where do I buy this puzzle ?
I do not offer blue prints or sell my creations. I give away the ideas. If crafty and handy, by watching all the videos on r(entropic and reading the descriptions and perhaps comments you will have enough info to emulate this.
Thanks
Серийнопригодная кустарщина. Некоторые детали очень сложной формы, что вот прям не айс. Начало прошлого века. Но очень красиво всё.
Я очень люблю историю строения оружия и мотоциклов , первые попытки , шикарные находки начала 20 века, обаяние стимпанк. Поэтому мои поделки в этом стиле , а кроме того моя примитивная технология гармонично приводит к такой эстетике.Посмотрите мой бобер Rough’N’Raw- Грубый и Неотесанный. Я не очень люблю обсосанную аэродинамичную эстетику пластика…
Спасибо за просмотр
incredible brother i am proud of you
Thanks
Mekanika URU?
Absolutely!!!! VIVA O BRASIL!!!!
Здравствуйте!Будем ждать продолжения,,Сериала,,
Да. Переделаю пружину вовнутрь точно как в оригинале
Esse é um protótipo da Uru?
NO, THE BRAZILIAN URU IS THE PROTOTYPE...I JUST COPIED SOME OF IT'S DESIGNS
Cuando la pone a prueba ?
Not sure what it means
How well it shoots is the real question.
WE WILL NEVER KNOW, WILL WE?
Какой прекрасный способ заработать 10 лет в подарок от государства, спасибо огромное, но видео интересное..)))
Посему не делайте ничего в подарок вашему государству, как я пытаюсь не дарить моему…А за видео и поделку спасибо, я старался
oh like, the Brazilian uru? noice!
Yes. Pretty close.
Весьма недурственно для самоделки
Респект
Взглянуть можно как он стреляет
Спасибо но нет: ведь написано в названии, что не стреляет…
@@STEINBVG аааа жаль а то я мысленно продолжил выходящий назад затвор в приклад как на G 33
А зачем тогда это всё
@@ЧеловексВостока это уже сделано в следующих эпизодах а в последствии затвор переточен на внутренние пружину и направляющую. Как должно быть. А зачем ? Посмотри все что я делаю может будет понятнее
Ох и мудреная конструкция, слишком много мелких запчастей, механик молодец но это неудобное оружие если нужно быстро разобрать и собрать
1) неполная разборка для чистки предполагает разбор верхней коробки, затвора, боевой пружины. Все нижнее остается нетронутым. Выкручивается задняя гайка и все.
2) всего 20 частей при разборке полностью. Покажите мне оружие где меньше??? И он разбираются без инструментов.
3) Бразильский Уру с которого делался этот образец считается самым простым ПП.
this thing is sick😍😍😍
THANKS
from scratch?
ABSOLUTELY, PLUMBING +HARDWARE
If I pretended I wouldn't come and ask to buy it from you.
THANKS FOR VISITING. THE ANSWER IS STILL NO
Супер! Чертежи можно здесь выкладывать?
Я в другом ролике вам ответил. В США у меня могут быть легальные проблемы. Информации во всех видео и описаниях достаточно для рукастых
I have a totally functional Uru in its original case. It used to be carroed onside an office case by the presidents security guards.
You must email me the pictures of you and the gun to the business email address listed for my TH-cam account - see under ‘ABOUT’ . I would be eternally grateful !!!
how much to order, send to Thailand
No orders no plans
What kinda gun is that?
Based on URU, BRAZILIAN SMG.
Donde consigo una arma asi en mexico y toluca
Watch all the videos and read the descriptions and comments…if capable, you will find enough info to build your own.
Конструктор из водороводных деталей, водяной пистолет👍👍👍😂😂😂🤣🤣🤣
Забавно, спасибо. Следующий будет из макраме!
Hello, I would like if you could sell me the mold or the PDF if possible, I will be grateful, I am from Brazil, I liked your work here, we have difficulty buying or producing, the return could be right here, thank you.
Sorry, no. It,s been asked and answered many times. I do not give away blue prints or teach step by step. I share general ideas in mechanical and gun engineering. People with adequate skills in the area easily can emulate or copy my work by simply looking at videos and reading the descriptions. The information provided there is sufficient for them- capable , skillful and creative people who I believe won,t use them for evil.
Nobody teaches me , but I watch and read. By the way, I have learned a lot from the guys in the Central and South America who a good at making guns from nothing and with minimal tooling. There are quite a few sites where they share their craft the same way I do.
Good luck
authorises all
@@coragem8154 Thank you very much my friend for being so kind to answer, I also do some things here for entertainment www.youtube.com/@pantanalselvagem.1061, but I tell you, you don't always know just by looking, without measurements it will have a great work to do, but thank you very much.
I saw you channel and your videos. Like the style of the bolt action - seems a common style bolt action and extractor for Latin America.
Stay safe!
Bhai sahab kaise a hathiyar milega aap bataia
you learn from me and others the skills necessary to build something like that.
Non firing dummy, Righhhht, Nice work. Hope you're a good guy.
I’m also a sceptic , but to a lesser degree cynic….thanks for visiting….I guess.
Masz rysunek techniczny?
My homepage states that I do not offer blue prints or sell my creations. I share freely my ideas with likeminded individuals who, if capable, can use them and build similar projects. Watch all the clips and read the descriptions, it might be enough
Эта штука работает? Какой калибр? И вообще каковы его возможности?
В описании написано что это нестреляющая модель в калибре 22
So, what's the point?
Evidently you have missed it.
I can appreciate good engineering/work...I left school with a city& guilds in carpentry but 1) your "gun" fits together well, but, isn't finished 2) doesn't work so, again why?
@@zivabrogan5807 Now , this deserves a longer answer:
If you look at many of my videos, I'm a scholar of mechanics, period. I don;t care to even to ride my custom bikes,[ once I know they are mechanically sound and fully operationsl] or shoot guns[ I mean my modifications on legal registered weapons] ..The mechanical engineering of parts, solving mechanical puzzles, trouble shoot, invent, improvise is my passion. And guns are just an excellent media/ canvas/clay for the artistic self expression. But building' guns' from scratch- has legal restrictions and limitations.
BTW, I can do wood work, but i'm too impatient and wood is not as forgiving as metal for my explosive character.
Thanks for your visit
See if you can enjoy my other videos[ I have no monetary interest, literally]
It's beautiful!
Thanks
А где показательные стрельбы?
Нелегально
Love ur work
How long u've been into smithing
Got my firearms is license and started to work on guns since Covid. Couple of years, but I have a long track of mechanical skills. To be a diagnostician, trouble shooter as an MD disciplines thinking and helps too
Beautiful piece.✌
Thank you kindly!
How can get one?
you educate yourself and you build your own.
Ela é brasileira?
She was born Brazilian, but I migrated to the USA and married a Russian )))
test shooting ???
NO
´Sou flamenguista, queria ele no Flamengo, mas temos que confessar, ele fez a escolha certa! Boa sorte no Grêmio
???
Hah, that really cool. I like how the barrel is on the bottom instead of the top, jk
I,m not sure what you,re looking at, but the brass nut that represents the barrel ( nonfunctional) is screwed on the front of upper ( round ) receiver which houses the bolt , main spring etc.
The lower receiver, square tube , houses the fire control group and mag well/release. Watch other videos on the topic, it will be clearer. Thanks
Muito legal, parabéns pelo trabalho! Apesar de estar tão longe, não dá para comprar um igual?
Thanks, but no plans
Comprar uma provavelmente não porquê a Uru ja não é mais fabricada, mais nada te empede de ir montando uma aos poucos.
Baixa a planta na internet, manda fazer as peças e vai montando em casa medmo.
Eu tenho bvontade de faser isso mas o que eu quero montar é aquelas pistolas de pederneira, tipoma do piratas do caribe.
@@miguelbabotdeoliveira7975 NEVER SAW BLUE PRINTS OF 9 MM URU ON THE NET. WOULD LIKE TO SEE THEM THOUGH.
THANKS
@@miguelbabotdeoliveira7975 Teve um brasileiro que fez uma pistola idêntico a berreta, em 9mm tudo com maquinário em casa