HOW TO SPRAY DOORS. Painting Doors With A Paint Sprayer. Spraying Interior Doors.
ฝัง
- เผยแพร่เมื่อ 8 เม.ย. 2015
- How to spray doors. Using a paint sprayer or airless sprayer for painting interior wood doors. Painting tips and techniques spraying doors are shown and explained in this video. Spray tip size, airless pressure settings, proper spray technique, paint accessories needed to paint your doors, and much more. Watch my latest video on how to paint a door.
LINKS TO TOOLS IN MY VIDEOS ARE BELOW.
Respirator: t.ly/OdH2
6” Spray Gun Extension: t.ly/RJV4
Tip Saver Tip Organizer: t.ly/6MV0l
Hyde Spray Pole: t.ly/GrXRb
Airless Hose Whip: t.ly/RKRjW
Titan 440 Impact Sprayer: t.ly/g7aY
3M M3000 Hand Masker:
Spring Tools Hinge Pin Remover: t.ly/vRBPA
Spraying Door Hangers: t.ly/q8DDp
Think you cannot paint? You can!
I created The Idaho Painter an alternative to to big box DIY video shows that have actors who only act like they can paint but really can barely act. My mission is to shatter the barriers of entry into painting and convince people that it can be a lot of fun painting and painting fun little projects on your own without an expensive professional painter. No experience is necessary.
Disclaimer:
Due to factors beyond the control of The Idaho Painter (or Chris Berry), I cannot guarantee against improper use or unauthorized modifications of this information. The Idaho Painter assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. The Idaho Painter recommends safe practices when working on any structure and or with tools seen or implied in this video. Due to factors beyond the control of The Idaho Painter, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from use or improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not The Idaho Painter. - แนวปฏิบัติและการใช้ชีวิต
Thank you Chris for these videos! They helped me tremendously as we painted our new home! One more house in the U.S. looking better because of your generosity and efforts!
We really love your videos! My wife and I have painted most of the exterior and much of the interior on our 6500 sq ft home to put it on the market and used many tips from your videos. The results have been excellent! We had two professional painters finish two high dormers (ladders set on the roof) that I didn't feel safe doing and they said numerous times that it looked like pros panted our house. A lot of thanks to your videos. Thank you!
Glad to hear it turned out well, thanks for watching!
You're are brilliant . I can't get over watching this video a million times
Thanks for all the great content you've made over the years, Chris. It has been enormously helpful to me in improving my knowledge and ability as a painter.
Really enjoy watching your vids , I'm a 3rd generation painter myself starting with my grandfather.
Last summer did a project that involved 40 functional french shutters. Went a lot like this. Hi gloss black, used lower PSI though. Came out stunning.
Knowing how to spray is just essential
Thanks so much for sharing of your time, knowledge and talents! I continue to learn from you!
Hey Idaho Painter!
I'm really loving your channel, a guy could get a great start as a painter by watching your videos!
I'm going to recommend them to any of my friends who is thinking about taking up the trade.
I wish my dad could watch your videos. He was a 3rd generation residential painter who worked from age 15 to 70. I'm married to an Idahoan - Coeur d'Alene.
Wow, thanks for watching!
You've really stepped up your game. Videos are awesome.
Thanks Chris I'm a new subscriber and I have already learned a lot from your videos especially the mistakes I've made. I'll make sure I look at your videos on my upcoming projects in order to cut down on the errors. Thanks again
The new video format is ok; I liked the old format too. Your channel works because you know what you are doing and teaching people. I'm transitioning to spraying and these videos really help.
Chris I'm very impressed, your skills have vastly improved, love the output of the videos. Thanks a lot I'm from florida by the way.
I've watched nearly all you painting videos and picking up the best advice from you. I work for a friend and a lot of work we do are doors, cabinets and a ton of trim work. I almost cry watching you get to use an airless sprayer because he's got us using a roller and paint brush for them all, even though he has a spray machine. He says it takes longer to prep and clean up so brushing is better, I just shake my head Chris.
Only thing holding me back from starting my own business is learning what different paints to use and doing bids. Once I get the knowledge of paint I'm ordering you bidding course. I already own a residential sealcoating company, I just need more work and need to take it up a notch.
What's your advice with trim work even if the residents are home? Most of our work is all apartment turns.
Thanks Chris for taking your time to make these videos bud. The new format is awesome.
I live this one to you. You are the video Master Maker!
I have been in building and remodeling trade for over 40 years, really enjoy your videos. I picked up some tips as old saying goes you never are to old to learn something. keep up the great videos Chris. thanks Rick
Thank you Rick!
Great Video. New Format Looking awesome. Thanks for all the great tips. With your help I have learned new technique's and ways to save money. Keep up the great work.
Awesome and fun to watch. Great tips too!
Thanks Chris for all you help, nice videos
Nice job on the videos!!! U really have stepped up u game with the new part at the end!!!!
Love your videos! I've learned a lot and I will definitely recommend you to my Idaho friends.
Thank you :)
Just sprayed some doors yesterday with a 308 tip. Got runs everywhere. Now, after watching this video, i realized that i was going up and down too slow, so a lot of paint was being put on the doors. Thanks for taking the time to make this video.
Nice work!
Thanks for all the tips, I plan on spraying my interior doors with a sprayer
Hope all goes well
Well done mate.Thanks Chris
haha i love how you dont edit out the outtakes.we use same technique. solid
Dude your videos are great. Thank you!
your videos are really helpful bro...God bless you for sharing them!
Glad to help, thanks for watching!
As always, good video & content!
What i like about you, aside from your painting quality, you don't get all ate up with mess ups on camera. You have fun with it, which leads to us seeing a true real person. Too much fake nowadays, so please stay this way! 👍👍
Lovely job and great advice.
thanks friend, your videos are really awesome, usefull lessons for diyers
dude. I painted my entire house by watching your videos. Cut the entire house by hand and learned to spray my doors. People think a pro did it.
thank you Chris you replying back means so much I do have a question what is the best airless sprayer to use to start off
Thanks Chris !!!
Very Helpful !!!!
Thanks for watching Matt!
Brilliant out takes are cool...
Make sense. Thank you! I have one tip for you as well. When you mask a room around the ceiling with the paper over plastic. Try to use Multi-Purpose Spray Adhesive by 3M instead of 3m yellow tape 2020. Works well and it is super fast!
how do you remove the adhesive afterwards?
Nice format. I like the videos on the side.
great video. if you put the airless hose behind you, you risk less chance of hose slap. when the hose accidentally slaps the door or whatever your painting. just a tip for all those watching. paint life!
lol, good tip!
Thank you so much for your video
Thank you great informative video! Very helpful 👏🏼👏🏼👏🏼👏🏼👏🏼
Your welcome thanks for being with us!
hi Chris I really love your Channel you teach really great skills I want start my own business and by watching your channel I know I could do it thank you so much
You are welcome, thank you for watching!
Your videos are great because of your excellent content and your concise talking style. Have you ever considered a video for us newbies to the world of airless spraying to go over the most common mistakes/mishaps for new users? I'll root for Boise State if you do ;)
I swear we have the same procedures in tons of ways but 1 way I can tell your more superior is with that little 2 ft spray arm especially would help that I'm a midget!! Your cabinet video is on point as well your bid and my price came out almost identical I woulda bid $5000 but the way you break it down is far more in depth than how I got to my number but I truly dig your style more and FYI I'm gonna use it if ya don't mind!
Profesional friend God bless you
Thanks for watching!
muy bueno últimamente me han hayudado, estoy empezando a independizarme en el departamento de pintura... I want my t-shirt 👕 😉good job
Thanks for the video. Can you suggest how to spray a prehung door.
Good video cheers🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧😎
Hey Chris, i am a painter & decorator in Brazil and wonder whether you can post the door hangers my way here in Sao Paulo? I do airless for 15 years and never came across these hangers they seem simple but sure are revolutionary in our industry. looking forward hearing from you.
Nice job
Audio sounds great, I am able to hear you clearly.
Awesome video, as always. What paint are you using for spraying? I just got Graco airless sprayer. Thanks.
Great video could you tell me what door hangers are looks like a piece of wood screw to the bottom of the door.
hello. i just sprayed with a graco 310 ff tip. i had to thin the paint quite a bit. what type of paint and how much thinning did you need to do to get the paint through a small 310 tip? thank you!!!
Hi Chris, thanks for the wonderful tips. Im using a graco X5 and i was painting doors and i got overspray. Should i sand it in the overrun after drying out and do a second coat?
Can you make any recommendations on how to paint interior oak doors so that the grain does not bleed through?
Legend
So Smooth! Looks like you are ~6 inches at most from the doors. I counted 9-12 sweeps per door. A 310 at 6 inches = 3 inches & doors are ~32 inches, so the above numbers must be true. So why at 6 inches or closer? It cant be overspray cause your outside, does it produce better finish? Just saw another pro painter do doors but near a foot away with 510, they started with one edge then to front door face spraying the outer edges of door face first, meaning outside right face, across bottom face, then up other side, across top face, then 3 vertical sweeps on door face and finish by spraying other side edge on door. Massive massive over spray of paint I could see. So 2 very different techniques, would love to know why you are so close. Great demo , thanks Chris!
Great video - you are my go to guy whenever I have a painting project. I was wondering, what are you using to hold the doors up?
***** Thanks, but I cannot find them on your web site. Can you please send a link? Also, do you have a video showing how you set them up?
Gday Chris, can you recommend a good spray rig for a weekend warrior looking to paint doors and trim? Love your channel mate. Cheers!!
Chris, what type of prep do you typically do on doors&trim surfaces? Do you wipe down with Liquid Sandpaper, or Oil Bond, TSP, or something else. (I know how you hate sanding) Thanks (I like how you masked the front end of your truck in the background on one of the last shots to protect against overspray)
hi Chris, i ve sprayed some doors, 2 sets of 2 doors, outside and connected them like you did in this vid. Later on I came to check and they where lying flat on the ground :-( because of some wind.So perhaps its better to join more doors to one another? , enjoying the new vids thanks.
Chris, Is there a reason why you don't spray the doors horizontal strokes?
I like the new video format a lot. Thank you.
I'd like to see that. Even on a pre coat door there's exposed / bare spots in the pre prime coat door. Still have to put a brush on it or roller
Hey Chris,
Long time watcher & follower. thought id just add to the comments re the new format.
Youre a great painter but suck & comedy haha. I like that youre not doing the pre done introduction anymore and then introducing yourself again.
I don think stopping halfway through a vid is the way go either. one short breif pre done recording at the end is good. I like the Saturday questions being answered in your office.
Keep up the awesome work as always.
Neil
Why do I get runs and sagging. And how do I avoid it? Thanks. Great video.
Thanks Paint Life 🤠
Your welcome James
@@Idahopainter you are inspirational to me and Swinney Painting Interior & Exterior.Thanks Paint Life 🤠🙏
I sprayed them just like you did in this video (outside) with 311 flat tip (not FF) and got lines and hazing. Could it be because they dried too fast (it was windy). I sprayed very evenly and consistently, overlapping 50% just like in this video.
Did you have to prime the doors prior to paint? Also how much do you typically bid a door for?
I sprayed our new doors with a sprayer. I strained the paint. After drying, there are a lot of little fibers. Any tips on how not to have fibers showing on final coat? Thanks!
Chris, how would you paint a metal interior door ? what primer would you use? paint ?
How did you keep the doors standing, what method did you use?
Great tips ; fast efficient excellent craftsmanship and an entertaining personality, your fun to watch.
Door hangers from www.paintlifesupply.com
How do you eliminate dust from going on the paint when you spray cause when I spray doors I always get tiny bit of dust and the rooms always clean I use a grace air assisted fine finish 412 And what's the device you use to hold the doors up on the hinges
I set my doors up the same way. One day, out of nowhere, a huge gust of wind came and threw 3 doors in the air and knocked 9 others over, damaging half of them. And of course, this happened about 2 minutes after I finished spraying... smh... Usually works well, though.
Peoria Painter AZ
when you are spraying you are using more paint, how much more paint should you order when spraying as opposed to brushing and rolling?
when i spray trim outside all the bugs show up.
Put something really bright close by, say a yellow shopping bag and the flies will be more interested in that than your fresh paint! 😊
Chris what paint are you using. Recently painted trim with 310 tip SW proclassic and got terrible fisheyes both times on my first coat. Seemed to clear up when I let the sun hit the trim while painting. Very weird. Sprayed in a diy spray booth outside. All trim was cleaned, blown off than tack clothed.
How many coats do you need for doors & trim? I have some doors that are unfinished pine, some white doors, some doors stained/varnished (but very old stain/varnish, 1892 house). Thank you!
Que tipo de pintura usaron para esas puertas
Gracias
Painting an interior door black. You recommend an ASE or latex and will a satin sheen be too bright for a black?
Any tips a how to prep and sand doors!?
Can't find the spray ceiling video. What's the name of the video where you spray paint ceilings? Thanks for making this video
When spraying properly, and the door is pre-primed, is only 1 coat good enough? Or 2?
Is that a gloss paint on the doors...I'm from Ireland☘ its what's mainly used on doors and wood over here takes ages to paint gloss. Plus I don't think it can be sprayed... thanks Larry
Do you prime the doors first? Great video. Also what is your go to paint for doors and trim?
thanks
Hey, thank you for being here with us! Due to the overwhelming amount of messages we get each day, we have created an amazing community through a private FaceBook group called Paint Life Mafia. Join us for private live shows and much more. Only members will be allowed to enter and interact in the group, creating a tighter knit community of painters. Each tier has different perks, depending on what you are looking for. Click here to learn more about this EXCLUSIVE group and join: facebook.com/groups/2305219262837596/
Special Thanks - Chris Berry, The Idaho Painter
I notice you use a bit of an arc pattern vs keeping the gun parallel to the surface. Opinion?
I had some painters come and paint brand new doors black.They are outside wooden doors with a small white plastic trim around the windows and the paint keeps scratching off on it is there a paint they can spray on that won’t peel up?
Hi Chris what kind of sprayer and nozzle you recommend?
Why do you never have a link with the type of paint that you use?
I used the info from this video to spray 5 interior doors, and 3 sets of double bi-folds. (all were pre-primed from HD, 2 coats on the visible side of the bi-folds, one coat on the inside of the bi-fold, and 2 coats on both sides of the "man doors", and I used just under 2 US gal. (maybe half a quart left)
One question I do have is what you use (if anything) under the bottom edge of the door to prevent the paint from bridging to the horizontal surface you have them standing on. Do you sink a couple of drywall screws in the bottom edge, or use painters triangles, or something else? (or nothing?)
Also, in some videos you are using the FoamPro door stands, and in others the Warner Quick Truss. Is one or the other better in some situations versus the other?
Thanks from north of the 49th.
Vern C i
Hey Chris, what do you suggest for painting a lot of doors at once, like 40 or 50? On a budget, looked at the door stands but way to expensive for this many doors in my budget, I saw some guys using metal truss hangers but wanted your input. This is for a new construction apartment building (biggest job of my life). I know you hate NC but what did you do when you first started out with this many doors to do at once?
steve gailey You can take osb or plywood and cut it into strips and screw them through the bottom
Hello, I like all your works, but I when I have painted my doors do not leave them to dry outdoors (always there are powder or small insects). I use my machine Wagner 665 and the result is excellent. The problem that I see in the videoes is that we all do not speak English and cannot estimate your explanations, anyhow I see your videoes. Regards from Spain.
how do you get the doors to stand up like that?
What is a good pant sprayer to buy for the home user please
How do you deal with the doors hinges? Paint them or not. If not do you tape them or remove them? Great videos by the way.
Have you thought about a wireless lapel mic? It would do wonders for the audio.
You spoke about a "paint door hanger". What is that?
Could you please tell me what kind of paint you are using? I’ve used latex in the past and the finish never truly gets hard. I recently used BM Advance for my door casing and trim. It brushes on very well and levels but after a few months it isn’t hard. This past week I tried SW ProClassic waterborne alkyd on some cabinetry and after a week I can still dig my nails into it.
What can I use that will create a hard satin finish? Thanks.
lacquer
question ,a video on how to paint a drop ceiling or maybe you call it a sunken ceiling two different colors,leaving the edges sharp,best effiecent method please
We would recommend rolling it
You do the same method on a bare timber door?
What type of paint do you use- latex or oil based? I am getting ready to repaint all my interior doors from white to black. They are coated with latex right now. Some I will be replacing all together so I will buy them pre-primed , others- just repainting. I am seriously considering spray gun as I have done the brush before and that was a pain. Could you recommend a spray gun for a non pro? And is cabinet paint a better choice for interior doors as well? Also, if the doors has latex on it now, what’s the best way to prep it? I tried a de-glosser, but it didn’t work as well as I had imagined. It is very liquid and you still have to scrub the old paint a lot 😕
No one really uses oil based paint anymore