This totally works. I was unsuccessful getting my old visor out following the directions from a couple of other videos, but this method did the trick. Thank you Dog Auto Parts.
Wish I'd watched YOUR video before all the others. I could not understand how to manipulate the lock correctly and you described it perfectly with the most helpful view of it!!! Thank you, thank you.
Amazing! I was having a rough time trying to shove the tab underneath the wall to get the old one off. This video saved me a trip to the dealer to pay them to install a part that they had told me was out of stock.
I was struggling for 20 minutes until I finally watched this video! 5 other videos came up first and none of them helped. You saved a life, I was losing it trying to get this thing replaced 😂😂
Thank you so much. After watching some other videos and struggling with it for a good half hour or more, searched and found this video. So so so much easier. It fell right out. Thanks again for making this video!!
Thank you, Thank you, Thank you.....Spent an hour trying to push that button in. Even went to the hardware store to find a tool with an angled tip to get at the button. Watched a couple other You Tube videos to no avail. Then saw your video, got a small screwdriver and in 5 seconds done deal. Wow.
Wow this was a revelation!! I was going crazy trying to get the old one out. Also a few other notes. Make sure the new one is unlocked. That messed me up too!!!! Also the one I bought had a sliding arm which made me think it was too long. Thanks for saving my sanity!!!! I will check out your store for sure!!!!
Great quick video & the job was done in time for a beer before the wife came out to ask 'hows it goin?' Might make my own video & will give you credit for sure!!!! I subbed to your channel & so should everybody else DOG!
Just wondering if you have any tips if it is not budging at all. It seems to be damaged and we cannot get it pressed down far enough to make it go under the opening. It needs to be "chiseled" or something to get it flatter to go underneath. Any thoughts? We have tried this method and others, with no luck (and it seems so simple, but frustrating!). Thank you!
I have had some very hard to work with ones in the past like you have described. It sounds like you need a smaller flat head screw driver that you can slide up and under the little pocket. This method will push the button underneath, but not put so much pressure on the button that it won't turn. If you push the button directly, it sometimes won't turn with the sun visor. If the visor is broken though, you could just strong arm it out, which will break the visor mount.
I agree with you 100% , in my case my headliner is really loose and I kinda pushed the ceiling up and I saw the little clip that we are supposed to push in and it finally worked!
I love you, man I swear to you I went to so many videos and you’re the only one who actually show correctly
This totally works. I was unsuccessful getting my old visor out following the directions from a couple of other videos, but this method did the trick. Thank you Dog Auto Parts.
Wish I'd watched YOUR video before all the others. I could not understand how to manipulate the lock correctly and you described it perfectly with the most helpful view of it!!! Thank you, thank you.
Awesome!! After spending 20 minutes struggling with trying to get to and push the little nub in unsuccessfully, this worked in 15 seconds. Thank you!
Same
THANK YOU!! Your video is the only one that helped get my visor back in!! From a busy mom to you, thank you!!
Amazing! I was having a rough time trying to shove the tab underneath the wall to get the old one off. This video saved me a trip to the dealer to pay them to install a part that they had told me was out of stock.
Thank you for this, I was stuck trying to take them off because I'm taking down the head liner
Thank you! Worked like a charm when nothing else did. Was about to figure out how to break the tab before finding this.
This was amazing! Best tip ever! All other videos were worthless! I drink to you tonight and tomorrow friend!
Excellent demo, I had my visor swapped out in about 5 minutes!
Thank you! Did exactly as you showed us, and it worked THE FIRST TIME!!! You are right. It merely fell out as you described. Genius!!!
I was struggling for 20 minutes until I finally watched this video! 5 other videos came up first and none of them helped. You saved a life, I was losing it trying to get this thing replaced 😂😂
After fiddling and getting frustrated I found this video and got it the first try. Thank you
In this video is that the driver side or passenger side visor?
Thank you so much. After watching some other videos and struggling with it for a good half hour or more, searched and found this video. So so so much easier. It fell right out. Thanks again for making this video!!
Thank you, Thank you, Thank you.....Spent an hour trying to push that button in. Even went to the hardware store to find a tool with an angled tip to get at the button. Watched a couple other You Tube videos to no avail. Then saw your video, got a small screwdriver and in 5 seconds done deal. Wow.
Thank you. I was struggling with it and decided to try you tube. Your method worked perfectly and quickly. -Bob
Thank you for this. I was struggling and then watched this and it worked. Got it switched and it works beautifully!!🎉
Wow this was a revelation!! I was going crazy trying to get the old one out. Also a few other notes. Make sure the new one is unlocked. That messed me up too!!!! Also the one I bought had a sliding arm which made me think it was too long. Thanks for saving my sanity!!!! I will check out your store for sure!!!!
AWESOME!!!!!!! I watched other videos but was unable to do this until your trick with the flat head! Thanks!!!!
I'm looking for a visor. Do you have one in stock?
Do you know if you are able to take just the mirror part for new models?
Thank you 🙏 you’re the best to explain it better than everyone else 👍🏽 new follower
Great quick video & the job was done in time for a beer before the wife came out to ask 'hows it goin?'
Might make my own video & will give you credit for sure!!!! I subbed to your channel & so should everybody else DOG!
Well done, I’m a mechanic and struggled with the proper way, thank you!
Hi could you message me if you get a 2015 crv passenger sun visor?
Great video!! Struggled with a couple of other suggestions before I found this. Worked like a charm the very first try! Thank you!!
Just wondering if you have any tips if it is not budging at all. It seems to be damaged and we cannot get it pressed down far enough to make it go under the opening. It needs to be "chiseled" or something to get it flatter to go underneath. Any thoughts? We have tried this method and others, with no luck (and it seems so simple, but frustrating!). Thank you!
I have had some very hard to work with ones in the past like you have described. It sounds like you need a smaller flat head screw driver that you can slide up and under the little pocket. This method will push the button underneath, but not put so much pressure on the button that it won't turn. If you push the button directly, it sometimes won't turn with the sun visor. If the visor is broken though, you could just strong arm it out, which will break the visor mount.
Thank u much!!! Just worked like a charm, and I saved $300 considering what the dealership quoted😏
I watched 3 videos before yours...no way. But with your metod I release it in
seconds
Mine locks when out of base socket, but what’s in the car, it doesn’t lock
Thanks a lot for your video ! It was very helpful
Thank you!! this worked soooo much easier!! I was at my wits end :)
Oh my gosh 🙌🏼 YES! Thank you!!
Thanks a lot you really saved us a lot of time and money God bless you
This method is better! Other methods in other videos are more tedious and frustrating 😅
Works like a charm! Thank you.
How are people SEEING where they’re putting the screwdriver? The design of the release is SO STUPID! I can’t get an angle to even see what I’m doing!
I agree with you 100% , in my case my headliner is really loose and I kinda pushed the ceiling up and I saw the little clip that we are supposed to push in and it finally worked!
Right! I just gave up..gonna give it another shot today smh
I did it!! Thank you!
1-2-3-BOOM!!! Thank you!!
Very helpful thank you
Bless you man
Thanks ❤
Bruh. Thank you ffs. It was killing me. I used your fulcrum method and bingo. 5 seconds
THANK YOU
1-2-3-BOOM!!! Thank you!!