have you gotten the datalogging to work on HTS? I know that wideband has a 0-5v output wire but not sure how to connect that to the laptop to be able to log AFR's. Right now im street tuning just trying to watch the wideband, rpm, and boost gauge all at the same time and make small changes but its not easy to do and very much trial and error would be nice to get some video's on how you do datalogging
In 99% of your videos your alone. Either no one likes you or you and I are a lot alike. I honestly like being left alone most. Especially at work (when I worked) I do have 6 dogs. They are all the company I have and prefer. Love your videos. I watch them all old and new.
B18b1 bottom end/p72 vtec head. In a 95 cx plus, thank you for all the videos also all the tec talk .Im starting to order all my turbo parts I could really use some help picking out parts if you have time hit me up I would like to ask you a few questions if you had the time.Thanks for all the help in your videos.take care, be safe on the streets.Walkerdog420 🙊🙉🙈
Shit, I just installed an inside the bumper mounted eBay intake to my car... about to go look for an engine bay heat sucking one now.... Are there ANY bumper mounted ones that you have seen that do not rob power?
Hey man is it to buy this mapping data ? Iam from germany andi have a B18b1 bored to 1.9 l B18c6 Secondoversize Pistons , B16a2 head with B18c6 cams. Could this tune work for me? Pleas help will be putting my engine in today :)
Not sure where you are in relationship to Shanow speedway? But I keep watching compilation videos of the spectator races on the dirt track you should totally take the Chevy staying and or the civic
How much does it coast for a tune with you have to burn a chip. For them hondata is really great but not ever one has 550 for v3. But 200hp is super fast for Ek my only put down like 105 it sucks!
Can u do a video on tunning on aftermarket intake manifold like the golden eagle one I can’t get the cold starts figure out. Only stays idle after it have the temp up
thomas nguyen if its tuned to good AFR when its hot, than just logg the startup and se what compensation tables you need to change. Have you deleted the IACV?
WISH YOU'D DO MORE of these type videos.
LOVE WHAT YOU DO Hunter.
Love the tuning tutorials man.
Great vid Hunter! Another ripper. Wish you were closer to NY...tons of info on the whole tuning process. Keep up the good work!
Here for the Algorithm, God bless you and your loved ones 🙏
HOW ARE WE GOING TO INCREASE YOUR SUBSCRIBERS ???
GO VISIT BRENT ON COLORADO AND TUNE A FEW CARS WITH HIM ???
ROOTING FOR YOU !
Hunter tune FTW
55th Stranded in Sarasota FL.
I live here now.
That thing Smacking for a all motor. But those shifts bruhhh. MiNT.
Thanks dude, very informative. It all helps! Waiting for the weather to improve in the UK so i can street tune my B20..
The new intro looks good!
Lover your videos been watching from your garage videos live the number crunching videos
Your pretty damn good at what you do man I wish I could do that shit to my car
Yeah man nice tune, i can hear on 3/4rd gear - it rips :D
Love the videos man you are great at explaining ! What dyno are you using
HTS is the Llama, Love the new intro!!!
Like the new intro to the videos, getting some of your top hats this week before they shut down the mail!
Hell yeah love that last mod u did right there.. driver mod baby 💪🏽💪🏽💥🔥
Excited for those turbos dude! We will definitely bring both vrt's down by you when were done
OG intro spool!
Yeet. I'm up to date! Been loving the videos
Dam.. smashing those gear changes 👍
Great video hunter. Its good to watch and learn this stuff. Any tips on what software and cables to get to be able to street tune cars. Im in the uk.
I use ostrich 2.0 and hulog
Another kick ass video! Where has christian been bro? We miss seein him around. 👊🤘
yep where u at bruhhh.
He’s to cool to come around 😂 works a job now
@@HunterTuned dam people and there real jobs. Smh lol
@@HunterTuned ahh ic. That's good tho. Work is good for you lol
Amazing video Hunter 💯
Another awesome video 💪🏼. Where’s Chris Chan been?
What laptop do you use hunter ? Great video brother..
New sub heard bout ya from 79th production
Was thinking about changing my intake setup on my dc2r but after seeing this I'll leave it where it is 😂
Banging them gears booooooaaaaaaaaa. Great job homie. Another hit!
Smashed👍
awesome and very helpful :D thank you Hunter
Awesome!! Thanks for sharing
Love the intro
Lit thanks again man
Made some decent numbers. Need to get me a set of those injectors. What connector plugs into them my DC2 is obd2 harness
have you gotten the datalogging to work on HTS? I know that wideband has a 0-5v output wire but not sure how to connect that to the laptop to be able to log AFR's. Right now im street tuning just trying to watch the wideband, rpm, and boost gauge all at the same time and make small changes but its not easy to do and very much trial and error would be nice to get some video's on how you do datalogging
Yes bro like the shifts 🤘🏼😁🚦vtec 🚗
She seemed kinda smokey maybe that's just me but she sure does rip. Love the walk through on the tune 👌
Probably has loose clearances
F•*kn mint. Awesome job hunter ftw again. Nice tutorial great work. Gotta love the high rpm screamers
In 99% of your videos your alone. Either no one likes you or you and I are a lot alike. I honestly like being left alone most. Especially at work (when I worked) I do have 6 dogs. They are all the company I have and prefer. Love your videos. I watch them all old and new.
Tough to find someone that keeps me focused at work I work better alone and focus better
@@HunterTuned My brother lol.
Great video!! i have a super similar set up in an eg hatch
Dope! What setting / dead times would u use for the flex fuel truck injectors in HTS?
ID1000
Best tuning camera view until you stopped showing the wide band!!
How do you get your afr gauge to respond that fast ? How do you pin it
HUNTER MY SON !
SHOOT VIDEO WITH THE LIGHT FACING YOU...NEVER AT YOUR BACK !
HAVE THE CAMERA ANGLE SHOOTING FROM THE GARAGE DOOR INWARDS !!!
B18b1 bottom end/p72 vtec head. In a 95 cx plus, thank you for all the videos also all the tec talk .Im starting to order all my turbo parts I could really use some help picking out parts if you have time hit me up I would like to ask you a few questions if you had the time.Thanks for all the help in your videos.take care, be safe on the streets.Walkerdog420 🙊🙉🙈
Shit, I just installed an inside the bumper mounted eBay intake to my car... about to go look for an engine bay heat sucking one now.... Are there ANY bumper mounted ones that you have seen that do not rob power?
Great Video 👍🏻
Thought you were going to empty the bin and the end 😂
Hey man is it to buy this mapping data ? Iam from germany andi have a B18b1 bored to 1.9 l B18c6 Secondoversize Pistons , B16a2 head with B18c6 cams.
Could this tune work for me? Pleas help will be putting my engine in today :)
How much u charge to tune all motor b series ?? N location of your shop ?
Not sure where you are in relationship to Shanow speedway? But I keep watching compilation videos of the spectator races on the dirt track you should totally take the Chevy staying and or the civic
She was moving !!!
How much does it coast for a tune with you have to burn a chip. For them hondata is really great but not ever one has 550 for v3. But 200hp is super fast for Ek my only put down like 105 it sucks!
Can u do a video on tunning on aftermarket intake manifold like the golden eagle one I can’t get the cold starts figure out. Only stays idle after it have the temp up
thomas nguyen if its tuned to good AFR when its hot, than just logg the startup and se what compensation tables you need to change. Have you deleted the IACV?
what are good 2 step setting for a b20vtec
I love the video 🤟🏿🤟🏿
Good stuff
What was the final timing at full throttle
Can you explain the issue with stock crank pulley and higher rpms? I know you aren’t a fan of the lightweight crank pulleys
The weight helps dampen vibrations and not shatter the oil pumps. Engines vibrate which shakes parts around. Needs the damper for a reason
HunterTuned that makes a lot of sense!
How do you set up 2 step on an all motor car?
Is it burning oil?
What injectors n fuel pump ?
what oil you guys using for all motor? like stock b18c1 ?
Royal purple 5w-30
Wanting to know if it’s safe making over 400whp+ with nippon pistons on 91 pump?
What the compression ratio
Quick NoScopes the specs on the motor is going to be b18b with gsr crank h beam rods / b16 head
Quick NoScopes it should be around 10.1 comp?
I say 3-350 is all I like to run on pump gas
HunterTuned 350 would be the safe to achieve with these pistons?
What determines if you should make a pull in 3rd or 4th on the dyno?
The amount of time the run takes usually. The longer the run the more data you can take in depends on power level power bands etc
HunterTuned thanks I also wonder why that was. Definitely has been a great learning video awesome work
Krazy Bubba minnnnnnnt
You by your self because of this covid-19?
#HUNTERBOIZ
hi fry
@@YostBuilt Juuuuuuuuuuuuuukkke Sqquaaaddd
yoh ineed some injctors for orbd2b b18c1
where is christain
Workin a job
Why is it smoking so much?
Hunter f*cking Tuned!
Why she smoking so bad blue at about 3 grad till limiter the a bang of black
What exhaust
^^^ Yes, what exhaust is on this? It sounds perfect.
I’m not sure lol
I think it’s 2-1/4 inch pipe
@@HunterTuned whatever it is made me miss having a full exhaust and hearing motor and not just open header 🤓i wanna hear my Vstack
El smokey
Sweating horsepower
HunterTuned lol hahahaha never herd that before lol
Hi was looking for a b20z2 base map on crome how do i go about that
You can order a chip on my site
all motor ?......
Great video!