Dyno Tuning Boosted Integra Hondata S300 !! 600 + HP Turbo Acura
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- Check out my website
www.huntertune...
Become A Patreon
/ huntertuned
Follow me on social media
HunterTuned TH-cam Facebook Group
/ huntertunedyoutube
Instagram : / huntertuned1
Snapchat : HunterTuned
Email : HunterTuned@gmail.com
Aye my car made it on the channel 😂 thanks for the tune and all the info!
Let him know it has 2000cc Dynamics injectors and that cam gear was never degreed when I owned the car. We installed the cams and kept them at 0 degrees. So that needs to be put back to 0 unless you're okay with it.
@@guitars415 nice thanks yeah wasnt sure what injectors were in it just that they were 2000cc and the one is set back to 0 the other is retarded like 1 or 2 degrees. Ill probably set it to 0 before the car gets retuned this spring.
@@MrClosecall30 Awesome. Looking forward to the video.
This is the huntertuned I be looking for!. Hella mint🤙
Thinking the same thing. I’ve been so busy this was great as I love Integra’s
So this is my old car. I'm so happy seeing it get some love. It has 2000cc Dynamics injectors. That intake came gear was never degreed that means it must have slipped! It needs to be put back to 0. Send me a message if you need more info on internals. I can send you a full list of ever part in that engine. Engine was built by Fullblown Motorsports and tuned by Shane at DB Performance. Here's the video making 615whp at 31psi. 64% duty cycle. If you have ignition problems change out the accel coil or install an external coil or go coil on plug. th-cam.com/video/mfh68dJoLKc/w-d-xo.html
I have the car now. It’s having ignition problems now. It’s now coil on plug also
Can i get the info on the engine setup
Hell ya man! love watching the tuning/dyno videos
Very respectable numbers especially from a 4 cylinder car thats super light!
My type of content !
Huntertuned oringial content so awesome
When the dip stick pushes out, you have to bend the top and it will sit against the head and not push up anymore...
Great vid man enjoyed every moment!! Keep up the good work!
Patience of a Saint. Glad it worked out for the owner. Quick checklist of basic things to do before a tune should always be done though.
Fresh plugs (heat range and gap) from your tuner
Fluids
Clamps
Vacuum
Cam gear bolts 😗
Working cooling system
Timing
You put the time and money into the build take the extra time to make sure it's ready. Awesome build though and great results.
It definitely sounded angry during all the first pulls. I know most people will disagree but i always put a tiny dot of loctite on the adjustable cam gear bolts. I've had them come loose and fuck up a lsv i was building 😐
Great video!! Hope 2022 is full of Huntertuned Honda videos.
Man dude great vid you should be in the millions subscriber's your knowledge is endless believe in yourself like you believe in cars got to love what you do to invest in every way you put into what is done with cars thanks for vid dude😁👍✌
Smashed that 👍
Good job man! That's some serious power for that little car!
Yes yes! Honda lessons I think I've got Crome down now Master Hunter.
Love this video I just order my vs racing 6262 this car have a similar built just like mine great number
My kind of vids problems and all. Great content 👌🏽👌🏽👌🏽
Loved it awesome content 👌 of course coming from me on my 7th Integra now lol. Can’t thank you enough for all you’ve helped me with. Take care man great work. I always wonder how much that just cost.... because you always go miles to get it right and then it shoots for the moon and still drivable. Thanks man
prices on his website yo
Great job again explaining thanks for every thing
this vid was alot of help ...
Been watching for the past yr and now have made my mind up. I'm gonna send you an email. Hopefully you can do a turbo build and also TUNE it. Just your ATTENTION to DETAIL is 2nd to none! 🙏👍👍🙏
1st from the UK
wow I like that one almost my set up but I'm lsv I wish 🤞 those numbers 😅
Seems like the gate may be sticking. The way boost falls crazy like that is what makes me think so.
i like the shorter 10 minute videos, you are getting some echoing in your shop on camera. looks like I baller build.
On a Few different turbo platforms that I've had, they all seemed to run better with copper ngk plugs, vs iridium plugs. Idk why but that was my experience and the best part is they are cheaper anyway, just have to change them more frequently than iridiums.
Were they with distributors?
Love it!!
good job!
Legit
Awesome possum!!!😁
Minty fresh 👌
Don’t know if you seen but your mustang is on the new Street Racing Channels video about 12:57
Nice title ☺
Pump gas?
My setup basically with a s366, south bay 1600 full exhaust also have 3 port Mac Solenoid with 10 lbs spring in tial 44 waste gate
How power did you make and psi?
@@michaellopez1196 I haven’t dyno yet ?
If the onboard datalogging is on. It will do those symptoms.
Did you resync the timing after adjusting the cams? If not then you added few degrees of ignition as well.
Those look like vs racing plug wires that I had problems with.
They were actually brand new accel plug wires, just a bad batch i guess 🤷♂️
Vms not vs
@@MrClosecall30 I had brand new accel wires before and when I went to check my plugs a week later it never felt right when I put them back on. Ended up distributor rotor blew apart after lol 🤦♂️ NGK always
Can i get a list what it has and stuff please. Building one
You really need a reliable sensor for your dyno.Figured you'd learn from the last wonky customer sensor you dealt with
He does have one just doesnt use it all the time.
What fuel was used in this tune?
What’s the bore size on that engine? I see I’m gonna need one of those turbos in the future.
84mm
@@MrClosecall30 Cool. You’ve got a good looking car.
Any bore size will work honestly
@@michaellopez1196 Do you think it matters for torque?
I couldn't imagine 600hp fmd I mean my 200 HP Corolla spins and it's slow as fuck so I know that shit spins a lot until tires heated good but then again even a rwd 600 whp would be difficult hooking on street
Do you have videos where you explain how to tune the ignition maps? I have fuel down but ignition I don't understand
Need a dyno for that... and I wouldn’t trust this dude to tune my weed eater.
@@Turboboob he has a dyno. T the beginning of the tune he changed the ignition maps to a base level. I'm asking what's as good starting point for ignition maps and pretty much the guidelines for tuning ignition maps from that point
@@popiwatv I have a dyno too and own a shop and I’m just telling you in my opinion, I wouldn’t even touch an ignition map without a dyno. Put all of your ignition timing under positive pressure to 8 degrees and drive it to the dyno to tune ignition. You would be an idiot to do it any other way
@@Turboboob ok that's what I wanted to know. And what's a good base for low cam map of ignition tables? Assuming a basemap will have it all over the place. I want to know how to set them to a good starting point and what it should look like. Under 8 degrees under boost and out of boost should be? Unless I'm not understanding.
@@popiwatv yes, you are correct. Depending on how much boost you are running and the compression ratio of the engine will determine the starting point. Obviously you would start tuning at low boost levels below 8 psi and work your way up. At a 10:1 compression ratio and only 8 degrees of advance in boost you will be nowhere near mbt. You will need a dyno to optimize timing for max power. I just tuned a vitara longrod d16 on e85 that made 575 whp at 8500rpm 38lbs of boost and only 8 degrees of timing. Just for reference. Every setup is different.
Are those turbos available with a t3 ar.82 backhousing
Yep!
👍👍👍👍👍👍👍👍👍👍👍
Hello
th-cam.com/video/KbNVzuYS5Vc/w-d-xo.html
12:51 is this the old chevstang handing out the gaps on the street racing channel?
600hp first honda 😂😂RIP
It’s better to put stock gears back on, I had those same gears slip a little and that ended up causing cylinder 1 exhaust valve to make contact with the piston and it destroyed my gsr, a waste of a lot of time and money building the engine
What do the gears have to do with the engine blowing?
@@michaellopez1196 the head of the exhaust valve broke off into the cylinder around 9000rpm, destroyed the head and piston..... lucky to block was salvageable
@@rynev3392 how did the gear slipping make you blow the motor 9k is normal rpm
@@rynev3392 did you not have a rev limiter set up?
@@michaellopez1196 I had some Brian crower stage 3 cams, I had a limiter around 9600. I experienced the cam gears constantly shifting positions from the day I first started the new engine. So either the piston and valves made contact or the intake and exhaust valves made contact.
Iridium sucks
laggy boi
Well you win some you lose some when you try and make this type of horsepower through 1.8L
Prkl't
😎