PC Build in the Corsair 4000X - Intel 12-900K/RTX 3070 [Build Guide/Step by Step]
ฝัง
- เผยแพร่เมื่อ 28 พ.ค. 2024
- PC Build in the Corsair 4000X - Intel 12-900K/RTX 3070 [Build Guide/Step by Step]
Welcome back ladies and gentleman today i build a kick ass gaming PC in the corsair 4000X case for Dani and his son David so sit back relax and enjoy whilst i walk you through the build process.
There were some big changes in the build process due to the wrong custom cables for the PSU and then the GPU riser cable being gen 3 and causing issues on boot - BUT we managed to sort it and after all completed it looked fantastic
Lets see if we can get 100 likes and please subscribe if you found any value in this video
Links for all parts are part of the amazon affiliate program:
CPU - Intel 12900K - amzn.to/3MitaWo
CPU - Intel 12700K - amzn.to/3GRO3Gz
Corsair Fans - ML120 (Triple Pack) - amzn.to/3x7A1we
Corsair alternative - LL120 - amzn.to/3lRK6JA
Corsair Commander Core XT - amzn.to/3PZ7fGF
Corsair Commander Pro - amzn.to/3GUNxYG
MB ROG Maximus Hero Z690 - amzn.to/38Q9efR
Crucial Ram - DDR5 4800Mhz 32B - amzn.to/3aoNHew
EZDIY RGB Ram Kit - amzn.to/3mcwXKh
AIO - Corsair Elite LCD 360mm - amzn.to/3Mlf9XG
AIO - Corsair Elite LCD 240mm - amzn.to/3Nf9TX3
PSU - RM850x - amzn.to/3NVhN7T
Case - 4000X - amzn.to/3MjF4zc
Samsung M.2 980 pro 1TB - amzn.to/393EdoT
Samsung 2tb 860 SSD - amzn.to/3NnzU6G
GPU - MSI RTX3070 X Trio - amzn.to/3GUdOGA
GPU - MSI RTX3070TI X Trio - amzn.to/3MjFVjo
Timestamps:
00:00 Intro and Parts
02:37 Cpu/Ram/Nvme Installation
09:08 Case Intro
11:29 Mobo Installation
12:26 AIO setup and Installation
21:00 Case Fan Installation
22:51 Commander Core and RGB explained
27:45 SSD Installation
29:54 PSU installation
31:44 Cable Routing + Mobo Connections
37:52 A few Changes
39:00 GPU Installation
40:19 OH OH
40:26 1st Look (Vertical Mount with Problems)
42:14 Final Look
46:02 Test Boot and final Thoughts
47:00 Montage
#4000X #12900K #RTX3070
techcheck tech check intel 12900k rtx 3070 pc build 2022Intel 12900k build,how to build a gaming pc,pc build guide,rtx 3070,Intel 12900k rtx 3070,gaming computer build 2022,4000x BLACK build,4000x build,4000x corsair,4000x case,4000 x pc build,how to build a gaming pc step by step 2022,12900k,PC Build 2022,pc build,how to build a pc 2021,step by step,3070,corsair 4000x build,corsair 4000x rgb build,tech check,techcheck, PC Build in the Corsair 4000X - Intel 12-900K/RTX 3070 [Build Guide/Step by Step] - เกม
Gutted about the vertical mount BUT still looked great. Which did u prefer? 🤔
i dont prefer the vertical mount when their is not much RBG showing up hahahah that's all about, let's be honest.. especially by corsair cases the window cames dark and when there is no led this gpu is like invisible
Agree mate would be cool in it did have rgb in vertical mounted layout just for some definition 😉 thanks 4 watching 👀 👍
No worries ..just got the COOLER MASTER Universal Vertical Graphics Card Holder Kit V2 (PCIe4.0) and this one will work and this gpu holder it will not be mounted close to the glass guys…..got my eyes open for a 3090 to upgrade the gpu too
@@danih9523 yes dani those little touches make all the difference 😍
I know it was 7 months ago but what does a build like this cost in the United States? Thank you for the cool ass video
Brilliant guy and super knowledgeable, stuck at midnight with no idea why my infinity mirror wouldn’t work and after a nice phone call he got it all sorted! Thanks again Gareth! J
Thank you for the kind words and glad it's working Jack - thanks for the sub
Great job Gareth !
Thank you …David is very happy with it and thanks for having him in the video …nice edit too …all the best and talk to you soon
More than welcome and glad you liked it Dani I was waiting 4 you to comment 😀
Thank you for this video, made a HUGE difference in my build today using the same case and similar components. My son and I got to do it together and your breakdown helped me knock the rust off since it had been about 10 years from my last build.
Nice mate love messages like these and really happy it helped. I appreciate u taking the time to comment too 👍
im about to make a similar build and this is SO helpful.. i was stressing so much about the front fans but you explained it very good!
Tha sk mate and good luck 👍
Great to have you back mate, looking forward to the future content.
Awesome build as always. Exciting times ahead as well with all the new CPUs and GPUs coming later this year.
Thinking of doing a whole new build myself once all the new hotness releases, can't wait 👍
Mate I'm so excited x670 /4090 I'll be doing the same thing! Thanks so much as always 👍
Thanks Gareth for this video, really helped me with putting my build together which was actually fairly similar to this setup. Would have struggled without your video, super happy now, thanks again great job
No problem mate and thanks 4 watching 👍 glad it helped you.
Good to see you back mate been looking at that cooler for mine it does look good. Another quality build and video. Awesome work 👍🏻👊🏻
Thanks Pal - Yeah i couple of set backs but thats what makes it fun :) nice to be back i have another 4000x build coming soon too But AMD - Thanks for the ongoing support mate and the aio is amazing you won't be disappointed links in description 😀
This video was truly amazing! My computer of 5 years that was prebuilt stopped working and I decided it was times for a upgrade.. I bought all the parts including the 4000x case with the LCD H150i cooler, and watched this entire video pausing on and off while doing my first ever full build. Took about 7 hours since it was my first time and I ran into some hiccups but without this video I would when been lost and finished way way slower. When I finally got everything in and hit that power button it was all working probably and the build was completed. Thank you so much! You deserve many many more subscribers!!
Comments like these are amazing and 100% the reason I do youtube. Thanks so much and really pleased you built your own system and welcome to the community 😀
@@TechCheckUK hey man I have a question. I booted up my computer using my old drive and it went straight into windows but it was very very slow. All the fans are working but the h150i liguid cooler has a red flag showing and whenever I try to go into bios a message comes up and says my cpu is overheating. I have an i7 12700 with the 4000x case , a 3060 12gb, 850x psu, 32gb of ram. I also get into bios but it’s very slow and I can’t do much or change anything.
My cpu says it’s at 100 Celsius in the bios. I’ve made sure all my wires are connected into the psu and the motherboard. I’ve switched from the splitter cable that came with the cooler and instead just put the USB’s into the usb slot without the splitter cable that didn’t help, all the fans work and spin the whole computer turns on and boots into windows but my cpu gets really hot and the computer boots up and is VERY slow after being booted up. I’ve made sure my H150i is attached properly and into plate, I first had the thin cord from the cooler plugged into “cpu pump” but I changed it to “cpu fan” and that also didn’t do anything. I feel like I was so close to getting my first build done 100% correctly then this happens. Any help will be very much appreciated thank you very much!
U need to ensure you have connected your commander pro or fan hub via usb2 to motherboard - download icue and do the update for icue. Have u checked u clamped down the cooler correctly with enough thermal paste? Did u connect to cpu header? I's your icue picking up your fans
@@TechCheckUK thank you so much!!! I forgot to connect the main cable to the commander pro and once I downloaded Icue all the RGB worked and so did the H150i. Computer is now fully running and all temps are perfect! Once again this build would have been very very difficult without your video and help. You have a earned a new supporter :)
hey man just wanna say good job at explaining everything so thoroughly, you made my first build so easy, great video!
I appreciate it mate thanks 😊 and good job on the build 👍
video was a life saver. thank you so much.
No problem mate glad it could help 👍 thanks 4 watching I appreciate it
Amazing build man! Best man to learn from for sure
Thanks mate your a good one 👍 👌
As a newbie, something that would really help me out... as you're doing things, you're narrating them, and that's helpful.
The challenge is, I don't know what these cables are by name. As you go, if you could show the connector to the camera, and ideally what it's plugging into, that would be so helpful -- it'd be the difference between me one-shotting the install, vs. going back and rewatching segments multiple times.
Anyway, I really appreciate the content. Hopefully this feedback was helpful!
I appreciate it branden thanks and I'll ensure I add it inn regards 😊
Im going to buy this case and the fans part of the video was very helpful 😃. Along with honestly the whole video was great
Thanks mate glad it helped 👍
Very amazing especially Corsair 4000D RGB knowledgeable video and part by part specs
Thanks mate 👍
Class as always mate!
Thanks mate glad u enjoyed it 👍
Amazing build and guide through the process! I was surprised by the quality of the video and how few subscribers you have when this is quality content. Just wondering, when you remove the RGB hub that the case comes with, what cables do you need to remove as well? I’m also doing a build using a commander core so I think it would be easier to remove the rgb hub.
Thanks mate I appreciate the support and positive feedback. I only remove the hub there is a sata power and USB 2 cable thats attached that also is removed apart from that nothing else my friend hope that helps and good luck 👍
@@TechCheckUK thank you so much and I’m excited to see future videos!
@@waliansari9467 I appreciate wall thank k u
Perfect and quality content.
Thanks mate 👍
Great video, thanks!!
Thanks mate 👍 I appreciate u watching 👀
@@TechCheckUK you're welcome 😁. But in the 2024 version (just purchased yesterday, there is no more usb2 splitter... It's a shame 😖
PS: but case 4000X don't need usb2, right?
The usb2 splitter comes with the corsair AIO cooler mate 👌
Nice build Gareth 👍👍 Vertical mounting is great if your not too close to the glass 😁
Totally agree Ian - always looks cool but no good if temps are gunna be through the roof.
Building a rig in the next week or so like this but in the (technically) new 4000d RGB airflow, can't wait! This has given me a great idea on how to go about setting up the commander core, thanks!
Nice and good luck on the build 👍 thanks 4 watching mate I appreciate it 🙏
Why not 4000x?
@@rodolfotsang4327 wanted the extra airflow, and it comes with the newer AF120 fans that match those on the AIO I am buying. Plus, if I ever want the glass front you can buy it from Corsair alone for $20.
@@JenjarplaysMC the 4000x front have glass to see better the rgb, i bought the 4000x does it have airflow?? I'm worry it will get heat
@@rodolfotsang4327 yeah it still has airflow, not as great but it isn't horrible. If you do run into issues you can also buy the airflow panel from Corsair; they are interchangeable.
That is a really great video! New subscriber and notifcations activated so that I don't miss your videos.
Thanks mate I really appreciate it 😀
Just got this case. This channel is awesome. Very informative, clean presentation, high quality video. You deserve many many more subs and views. Keep up the great work!
Thanks mate I really appreciate it and glad it helped - ps I'm trying to grow trust me 😁 I'll get there 👍
Muchly enjoyed! the content. Great problem solving indeed! it surely is a great skill to have. Quick question thou.. Did you keep the default CPU and case fan curves or do you use custom curves?. Great Vid, Cheers - Jass.
I always set the curves myself as when not under load I like the peace and quiet 😌 thanks for commenting and good luck with your build 👍
Loved it!! New suscriber
Thanks Rodger i really appreciate it - Welcome
Amazing video-doing a very similar build with the same case and AIO. This was really helpful; just wondering if you used the same screws for the fans when you reconfigured the front fans to 4, 5, and 6 for exhaust. Are the screws supposed to be self-tapping? Just want to make sure before I force the screws through the fans. Thanks again for awesome content!
Thanks Nicholas yeah same screws. Glad you liked and good luck on the build 👍
34:16
My heart ⚡️⚡️⚡️⚡️⚡️⚡️
LOL it looked worse than what is was mate but i get it. thanks for watching
That is a lot of system for that case but damn if you didn't make it work!
When I built my rig that you know about I researched so many things for the MB I was getting, and I saw that people were having that issue with the risers as well... not to mention it seems this board isn't to fond of 10 series cards and some 20 series cards. Really niche MB but with my 3090 on a 4.0 Riser works great. However I do believe some of these MB's do seem to play more to the newer tech with more and more dwindling support for the older tech, which is sad.
And hey, wouldn't be a typical PC build without some sort of SNAFU lol. Good job :D
Thanks Charlotte 😊 as u say it never goes 100% to plan lol but that's the fun I guess too. Yeah I think it would have been fine with a gen 4 riser tbh but customer purchased a gen 3. Not to worry they were still over the moon. Thanks as always for the support 🙏
hello their,just wanted too ask i bought a deepcool ag400 heatsink fan
for asus b550 tuf wifi board (UPGRADE) and it stands up rather than lays flat, making it stick out 6" from the board too the side panel but their isnt enough space for the side panel to go on ,if you could tell me i would like too know what the size is from the motherboard out ward too the side panel on the corsair 4000x,or WHAT is the measurement of the roof (INSIDE )WIDTH ways of the case,im just trying too buy a new case without buying the wrong one,ive already done that with the heatsink,massive it is 6" square....jaw droppingly BIG. thanks for your time....
Hi mate sorry for late reply - clearance in 4000x is 170mm for tower coolers
You know the screws that you used for everything do they come with the parts or do i have buy them separately (if separately plz tell me the name of the screws)
All the screws you need come with the case mate 👍
@@TechCheckUK thank you oh and which will be the best graphics card for £400 i found RTX 3060 VENTUS 3x
I would probably go for 4060ti mate its about 15% faster than 3060 - amzn.to/3LRMht4
Awesome video. How theheck did you manage to plug in those tiny connections with your left hand lol? Cheers
Hi Jimmy I'm not sure tbh I think a little but of luck - cheers for taking time to watch 👍
Do you need to have the push pull config with the extra fans in the front of the case? Curious as I’m doing a similar build. Great vid!
Oh I see now that you have removed them! Nvm
Thanks for watching Michael and good luck with the build 👍
Is the back fan the only exhaust fan? Or are the top ones as well?
There are 3 at the front as In take and 3 at the top and rear as exhaust. Hope that helps mate 👍
Could the aio cooler fit at the top instead of the front? Doing a very very similar build to this one with exact same case
Hi Evin, a 240 or 280mm can fit at the top and 360mm aio at the front. Enjoy the case its amazing 👏 thanks for the support
22:26 Did you have to buy longer screws for the top two fans flipped awround to exhaust the case? The threads on the fans are only on one side and when I flip them around the short screws provided don't reach the bottom part of the fan where the threads are.
No mate the fans I used have threads both sides of the fan so it can be intake or exhaust - u only need small screws / Nothing stopping you using long ones if u have too tho mate if that's what u need
@@TechCheckUK ty. Great video very helpful
@@Photogromer thanks 😊
Also I'm an idiot. The small screws create their own threads in the fan plastic when you screw them in. I spent way too long trying to figure it out before the light bulb went off. Lol first solo pc build. It's been fun 😄
Thats the fun of it mate think of it this way it will never happen again cos u will know 😉
i have this case and wondered if a Corsair iCUE H115i ELITE CAPELLIX RGB 280mm AIO Liquid CPU Cooler will fit on the top . the ram is Corsair Vengeance RGB Pro SL 32GB (2x16GB) 3600MHZ DDR4 RAM only 44mm tall apparently .any advice would be good as my first build and nervous . thanks in advance
Yeah a 280mm aio can go at the top mate - good luck on the build 👍
How much room was there left in between the gpu and the aio radiator? Im planning on building this ecaxt setup but pairing it with either a TUF 3090 oc of a suprim x 3090. Do you think it will fit? Great in depth build video man! i'm definitely gonna use this video when building my pc :)
Thanks buddy it was tight, and that was a 3070. Great gpus BTW can't go wrong with either 👌 I wouldn't like to say it would as I don't have it anymore so can't check. I wish u all the best and good luck 👍
@@TechCheckUK Thanks for the quick response! Just ordered everything. If it doesnt fit i'll switch to 100i Elite LCD top mounted aio. Do you think that will be enough to cool an i7 13700k in the 400x rgb case? thanks!
@Bram H 100% mate 13700 not that bad it's the i9s that are really hot 😳 good luck 👍
Good day mate. I have the same 4000x case and still a bit confuse on either to install H150i in front with 2 extra fans on the rad or H115i on top. Any tips would be appreciated, great video as always. Greeting from Canada !!
Thanks mate and appreciate you watching - I would opt for h115 at top as exhaust looks better - will have slightly higher temps 4c so not bad BUT if you already have the h150 at the front will also work great 👍
@@TechCheckUK No I have yet not purchase any AIO, but I'll take your advice and go high. Thanks for your help, I appreciated !!
More than welcome and appreciate the support and good luck 👍
Nice build, but do i really need to have a fan(s) at the back of the pc?
No U dont need one but it will perform better if there is one mate
Great video I just have a few questions if you don’t mind. Are the top and rear fans exhaust or intake? Also i know you said the radiator (at the front) was an intake but I see you added 2 more fans on the other side of it(inside the case. Are those 2 extra fans in the bringing air into, or out of the case? (I think when you said push pull I need that in more simple terms) sorry for my lack of knowledge, I’m new to pcs.
The top and rear are exhaust mate. The fans at the front are set to intake. Fans outside case are pushing in the rad, and fans inside on the rad are pulling air (both set as intake) just push air and pulling air so you can get more airflow and therefore cooler temps
Okay thanks so much, great video and great channel
Much appreciated 🙏
Is AIO Corsair H170i Elite also will fit front panel of this case?
No mate too big
Exactly the same issues as I had in my 4000X thinking about push/pull on the 360mm elite capellix with my RX6700XT. I hope the 3090 isn't much longer than the 3070 lol.
Yeah with the gpus getting bigger and bigger the mid tower cases not compensating it's hard especially with the odd shapes of the shrouds on the gaming x trio - change to pcie 4 riser cable will sort all the issues if needed but I personally think its too close to the glass.
Hey guys quick question, I'm planning on a build with the same sorta set up with the front mounted rad but just wondering if it naye be better you have the rear fan as an intake instead of an exhaust? Cheers
No mate rear fan always as exhaust as you will be pushing air from front and exiting at top and rear. Always intake bottom or front or side and exhaust at top or rear. Regards
Quick question, can you actually still fit at least one 120mm at the top? It feels like it can still can.
Yeah u can mate
Hey mate! thanks for this video, i was all lost since my cpu cooler didnt fit on the top, so this saved me. Can I use the fans from the front on the top/back of the pc?
Nice glad u sorted it and it could help 👍 yes mate you can use the fans at top and rear. Happy New year
@@TechCheckUK awesome, thanks for replying!🥹🥰 happy new year to you too!
@@odalvaas1443 no problem 😊
Could you just use the sp case fans with the radiatior for the aio. Then use the aio fans as exhaust on the top and back to save time?
Yes mate that's not a problem
@@TechCheckUK thanks for the quick reply
No worries 👍
all of the fans are ml120 elites right? and I'm going to get the same exact gpu, will it fit if i put it horizontally if the aio is above?
Yeah all ml120s and yeah no probs at all with horizontally mounting gpu and aio above
@@TechCheckUK alright thanks 😁
Ni problem
Can you please make a dedicated video on inward and exhaust fan orientation....it appears that we install radiator and other fans in wrong manner
Yeah no problem it's a video I will be doing soon - thanks for the support 👍
@@TechCheckUK ya lots of love and support from India ....Enjoy ur content
Thanks 😊
Top thx ❤
Appreciate it mate 👌
My build uses this same case and AIO, and AIO position with the fans in front. My CPU goes between 48C and 64C, and that seems hot to me. Is there anything I can tweak?
Personally I would check your aio and ensure its seated correctly on cpu at idle should be less than 40c deffo - could just need tightening down mate
I am getting an Asus ROG Strix Z690-E Motherboard and I am so confused about the SSD configuration.
Is there a huge benefit to getting a 980 Samsung 500GB M.2 4.0 NVMe drive for windows 11 only?
I am also planning on getting a 2TB M.2 4.0 NMVe drive for all of my other game/application storage.
Is that the correct way to configure it? NVMe for both storages?
Also, I saw that slotting in the first slot for this board halves the speed (x8 instead of x16). I wanted to see if you knew anything about that.
Thanks for everything!
Hi Vyrukk z690 e is a great board mate and good choice 👍 personally I would now only stick with nvme drives as much as possible. Especially for operating system and especially where data transfer is crucial. U don't necessarily need a 4.0 2tb drive as load times are very simular for games as pcie 3.0 but it cost don't play a factor then go for it. Windows on top slot and then 2nd drive goes into next available slot down mate and x8 is still much faster than pcie 4.0 so it's fine 🙂 hope this helps and good luck with the build 👍
@@TechCheckUK Thank you so much!! The only other question I have is about cooling. Does the i9 12900k NEED the 3 fan Corsair cooler (iCUE H150i Elite Capellix)? Or can I use the H100i Elite Capelliix in the 4000x case?
So confused about this. I want to use the 4000x case with a top mounted radiator, but I’m hearing maybe the H100i won’t be able to cool the i9 12900k.. I’m not wanting to overclock or anything
Yes you can mate the h150 will be cooler but it wouldn't be a huge difference mate especially if your not overclocking.
BRO I FUCKING LUV U BRO LUV THE PC BUILDS BTW KEEPM EM COMEING BIG FAN
Thanks mate I really appreciate it 🙏 lots more content coming 👍
The 4000x itself comes with an RGB controller right, why still commander pro? any added advantages besides single hub?
U can just use the commander pro as a fan hub and have one control and less cables attached to fan headers and less clutter mate. Its not essential at all if your looking to save 50 quid. The best way is to get a 240mm or 360mm elite capellix and it comes with commander core that can do pwm and rgb.
Are the fans on top and the back the case fans or different ones?
They are ml120s mate the ones that come with the case are sp120s
@TechCheckUK will the sp's work or should I upgrade? I have the h150i. I'm running a 4070 and a i7-13700K.
Thank you for the fast response! Your video helped me with my first build.
The sp120s will be fine mate used 100s of times and no problem 😊 merry Christmas mate and good job on 1st build 👍
should i keep the stock fan manifold or switch everything to the new cooler one?
Sorry .ate I can't quite understand what u mean
@@TechCheckUK the header for the fans, I just switched everything to the 6 port one
@@TechCheckUK like you did
@@logicalatheist1065 yes mate if u have the commander core just use that like i did yea mate
I can't figure out how to install the extension cable to the 4000x case. the holes don't line up? Anyway someone can show me? What I did was put it in the grooves but card moves a lot. I would think it needs to be mounted. Holes on bottom of case but don't line up to extension cable. I am confused...
Depends on brand mate corsair designed for most and the one we used worked great. Sorry your having issues.
what screwdriver is this at 5:51 ? i’d appreciate if someone could tell me so i can buy this before my next build in a few days
no problem mate its the amzn.to/3JWTHuH link for you
@@TechCheckUK ahh bruv this is amazing! tysm ❤️
No problem mate glad it could help and thanks for the support 👍
Hi again, is pcie riser 200mm enough for corsair 4000X ?
We went 30cms but that was 5000d, 20 should be fine as its much smaller and the beauty about amazon is that if its wrong just exchange for a 30cm one just make sure you try and keep all packaging neat and tidy
@@TechCheckUK thank you bro…😊
@@rizalirawan608 no worries
What reset button does.😮 does it restart pc or reset windows?
All depends on your power settings in additional settings on power maintenance mate 👍 I always have it set to restart Windows. That way no caching of ram and full reset.
What was the oh oh and expansion pack? lol I bought this case and I got that GPU (4070Ti though) and now I'm afraid it won't fit.
4070ti.should fit - I had a 360 aio at the front of the case - tbh it's best to have a 240 at the top and then it gives u loads more room for longer gpus
@@TechCheckUK Thankfully it did fit with plenty of space. I got the MSI gaming trio and the only thing I hated about installing it was the anti sag bracket. Other than that everything is put together and running beautifully
@Ashley Bilmes well done mate 👏 and yeah the brackets can be a pain in the the backside to lineup 👍 thanks again 4 watching.
Got this case recently , and cannot get the RGb fans to work, the fans work and it reads they are there but no RGb control…
It's because your rgb fans are not in order 1-6. You need to check your your order mate and then they will work 👍
I did basically the same build a year and a bit ago, the case doesn't work very well with the vertically mounted GPU anyway, my ROG 3070 overheats so i have to leave the side panel off :/ i almost ripped my mobo in 2 trying to put the thing on it originally, so i had to use the gen 4 extender from corsair :P
Totally agree as gpu too close to the glass panel. It looks nice but don't perform well 😔 thanks 4 watching mate
No problem bro, it was fun to watch :)
@@fxhzwingzero 😊 thank u
I have a question, I just started building my first pc and everything is finally on and working except for the AIO fans (Kraken z73) and I switched the fans of the kraken z73 and put them on as case fans instead and decided to use the original case fans that came with the 4000x and use it on my AIO and they aren’t turning on but the actual AIO itself is on it even shows the temp of the cpu when I turn it on can someone help plz?( So the problem is the AIO fans don’t turn on but the actual AIO is working if that makes sense) sorry if it’s complicated to take in I don’t really know how to explain it since I just built it
They are all connected to the fan hub but don’t turn on but when I connect it to a 4 pin on the motherboard it runs on but has no lights as well
Have u connected the fan hub to sata power? Have u connected the USB 2 from the hub to the mobo mate? Hope that helps
@@TechCheckUKI am going to double check that when I get home, but I also can’t seem to see even when I do have them on the RGB won’t work and I have them all 3 connected to the I think it’s called RGB node at 38:20, I was connecting them (The fans)to the MOBO to see if the way worked and when I did they were spinning but the RGB wasn’t, I feel like the whole situation is probably because I don’t have them connected to the right power source
@purpy if y drip me an email techcheckoutuk@gmail.com with your fb or insta I'll video call you and we can sort It together mate
does this 4000x case come with the core commander?
It come with a 6 port fan hub and 6 port rgb hub nut no commander core mate 👍
@@TechCheckUK which one of the Corsair cases come with a core commander? Also can I buy the core Corsair commander separately?
The commander core comes with the elite capellix aios mate
Yes you can also buy separately also - amzn.to/3tHYkCG
What's the name of the graphic card extension thingy?:O
pcie extension cable mate they come in 3.0 ans 4.0 do just be careful and ensure you get the correct one u need
@@TechCheckUK how do I know which one I need?🥹 I have the same case a gpu as you, but the gpu wouldn't fit horizontally
U will need a 4.0 one mate
@@TechCheckUK i think I figured out how to mount it. Everything is actually fixed now. However, my pc doesn't want to boot and I have a red light on my rog strix 550F cpu light. I've double checked that it has power, and that no pins on the cpu are bent and that the arrows match. Do you happen to have any advice for troubleshooting this?
@@odalvaas1443 is it 5000 ready? Does it need a bios update?
Hi i want to ask, to work properly it must use pcie extension gen4?
To eliminate any issues yes use gen4 riser not gen3 - the issue was that the mobo supports gen 5 and the card supports gen4 but the riser was gen3 and we were not getting and picture out even if I changes the pcie settings to gen3. As soon as we changed to gen4 on the riser a few weeks later all worked perfectly. Hope this helped
@@TechCheckUK do you have any recomended good gen4 riser?
@@rizalirawan608 I like this one amzn.to/3O4DRwn but there are other below
amzn.to/3z5UsvR
amzn.to/3yF0RfV
Hope this helps
I am using a vertical mount kit now pcie4 and works and looks great specially after i upgraded to all ql fans
@@danih9523 everything still working great then 👍 good news hope your well chap
Why not use the commander core for all the lighting?
I did connect 6 rgb and 6 pwm to the commander core mate I added 2 extra fans and utilised the included hub and a pwm splitter to minimise cables. Regards and merry Xmas 😊
@@TechCheckUK my bad, I missed that… I didn’t think you had that much lighting and was curious for the split, now I know :). . Thank you for the reply and a Merry Christmas to you as well. Great video!
Thank you
Similar setup to me.i7 9700k msi 3070 rtx corsair 4000x rgb case.
Nice little system and as long as it does what you need my man no need to upgrade!!
Same case and thanks for this vid! I wasn’t this cool.
Decided on:
i7-10700k unlocked
iCUE H150i elite
ICUE SP120 RGB ELITE x3
970 EVO Plus x2 1TB 3x4 NVMe
XFX
VENGEANCE PRO 32GB x 2 3600 MHz DDR4
RMx850x
Open to suggestions or comments.
XFX Speedster MERC319 6900xt
1st build since 2015. Just had to add..lol
Nice build and good parts choices can't go wrong! Do u stream or edit? Just thing of that when choosing a amd gpu as will make a difference mate especially encoder nvenc for example. But the pure rasterization power is amazing 👏
@@TechCheckUK No sir, I'm still playing Ultima Online..lol. I'm U.S. based. Thank you for you advice/opinion.
@@canyoudo1t no problem at all 6900xt will be great 👍
The orientation of the radiator is wrong, the pipes should go from bottom up to the pump.
Oh dear that's incorrect as long as the pump is lower than the inlet so that any air will be be trapped at the top of the rad its fine! Please don't Reference Steve's video.
can you do a push pull config front mounted???
You can only do a push pull with 2 x fans in pull if the GPU is vertically mounted and only 1 x fan if horizontally mounted - just not enough room for all 3 - hope this helps
@@TechCheckUK ya I want to move my 280 aio from the top to the front… it’s rubbing against my motherboard being mounted on top.. so I should be good with getting a few more 140mm fans for a push pull correct?
What gpu do u have and are u vertically mounting?
@@TechCheckUK also wondering if its worth doing all that, if ill see any temp changes also.. its currently working fine on top just snug against my motherboard, and not sure if thats bad for that or what...
@@TechCheckUK its only a 1060 so its small
A W E S O M E
Cheers mate 👍
how many fans comes with the case?
3 in total sp120 rgb
How do I get my pc to boot to windows and not bios?
Have u installed windows? If so have you set your boot drive as priority in bios?
@@TechCheckUK how do I do that
Search video on YT change bios boot device and install windows mate - it will walk you through it
Could you please come to my country to assemble my PC😍🥰 Fantastic Work👌👌👌
Wish I could - thansk 4 watching I appreciate the support 🙏
can soport eatx board?
Yes it can mate but u will need to remove the cable bar - may look a little untidy thats all
@@TechCheckUK How do you remove the cable bar?
Would you recommend an Intel I7 over Ryzen 7?
We talking i7 13th gen vs 7000 ryzen 7?
@@TechCheckUK Ryzen 7 5800X3D and I7 12700K I was recommended 😂
@@anonymoushunter9808 5800x3d all day long mate if it was 13th gen it would be 50/50 but not with 12th gen 5800x3d all day long mate 👍
@@TechCheckUK thanks man
@Anonymous Hunter no problem mate 👍
where do you play an hard drive ? please
Where do you plug it in? Or why do I play on harddrive?
1- hard drives require a sata data and sata power cable. One comes from psu and the other goes from hard drive to sata connection on mobo.
2- I would only ever use hard drives for pics or large volume storage tbh
Hope that helps or at least answers your question
@@TechCheckUK ho yeah thx 😅
would a 3070 Ti fit inside this
Yes mate no problem
any specific reason why rm 850x and not rm850?
The rm 850x is Japanese and much better quality my friend over the standard rm 850
when i saw the 3070 i though this is a video editing pc
Yeah I understand its the only one the customer could get at the time - it's now got a 3090 👍 thanks for watching
Bottle neck 40% run gpu i7 12700kf it's going to be faster and overclocked crazy
Agreed bottlenecked at present but not once upgraded to 3080ti as originally intended 😉
What is the cost?
Back when this was built it was £2,500 but very high quality parts 👌
Why commander core not showing in icue,
U done a firmware update in icue
@@TechCheckUK yes version 4 , I did update it says latest update , I unplug the ubs cable and plug it again, nothing works, only shows drams, gpu, and h100 ape….
Is any rgb on fans? It must be working as fans are spinning yeah?
@@TechCheckUK yes fans are spinning and lighting ,
Oh I'm lost then as its delivering power and rgb
Well! here`s hoping the asus rog maximus z690 extreme will fit xD
did it fit? it should have done mate
@@TechCheckUK I will be perfectly honest. I went for a new case 5000 Airflow to be sure. The 24Pin and other connectors are oriented differently so managing em would be a nightmare in my own opinion. The build is currently on hold since my new psu isnt here yet. If you would like,I would be happy to update you when it`s done =)
There was also countless "experts" with many opinions xD So I went with my own instinct on this one! I hope it all pans out! :D
Great choice and I'm a great believer its best to take into consideration all these opinions but make your own choices 👍 yeah love to hear how it turns out too. Nice 1 and best of luck.
Some say having that card soo close to the glass is a big no no
Totally agree mostly done for aesthetics I personally prefer standard orientation
@@TechCheckUK I’m seriously considering this case tho
You will love the case easy to build in looks great and high quality 👌
Expensive mobo, processor and AIO cooler but mediocre video card. The part selection is kinda weird..
It was the only one the customer could get at the time - I believe after reading the comments he upgraded to a RTX3090
@@TechCheckUK I see. Now it makes sense haha
No problem 😊
I just want to say stop worrying so much about sweet talking the product and start showing me how to put it together. Like jeez 3/4 of the video is u say how this is so great, it’s amazing product. Like man just put it together tell me this is what I’m putting in and this is how u do it, and don’t do this do it like this
Did u watch last weeks video? Would love to hear feedback on that? Cheers for watching th-cam.com/video/D0SO2GVXGTs/w-d-xo.html
You are a sad human let the guy be excited
of only you installed the radiator correctly. Hoses at the bottom bud.
Oh dear 😳 nah they are fine. U been watching too many jay2cents or gamers nexus videos. As long as the pump is lower than the inlet on rad it is fine. Air will sit at top of radiator. Given I have just replaces my AIO after 5 years and never had an issue. Built 100s of pcs and none have been returned I would say its OK 👍
tubes up on the AIO lol ok
Lol