Thanks for watching! Please consider subscribing to my new channel here: www.youtube.com/@jamminpcs. I'm trying to move the easier hardware stuff there so that I can focus on the more in depth troubleshooting and diagnostic videos here :)
Thanks so much for this video! My LCD was not working but when I took my laptop apart based on the instruction in your video, and blew some air around and wiggled the cables it started working properly again. Because of the video I had the confidence needed to start the repair!
Very good video! As an experienced desktop tech, I was very much aware that you thought of everything where a tech could make a simple mistake. Your warnings and suggestions on how things could be different, and the pitfalls of assuming that just because we have years of experience, to assume nothing and do your homework, Thank you very much.
I don’t make comments on TH-cam. But thank you sir. I don’t know much money you have saved me but I know it’s a lot. And I have learnt a lot too . I just removed and inserted it in and boom! Back to life
@@PC_Monkey Hey bro, my pc fell but not so hard and right now it turns on and I can see the screen is working but brightness is too low to a point where by I have to use direct light to see the content
@@nkululeko7381 1. If the compute fell, its possible the LCD or the LCD Cable were made loose. I would think about going inside and making sure the LCD Cable is secure by unplugging it at both ends and then plugging it back in. 2. For a computer that turns on but the display does not work, try this video first; th-cam.com/video/e9iy30J00-k/w-d-xo.html Let me know how that goes :)
@@PC_Monkey Thank you so much, I did not buy a new cable. I just removed it and re-inserted it back on, Turned my laptop on and boom, My screen came back to life again.
@@onesounder ekse my brother what was wrong with ur PC from the get go¤¤¤cz mine switches on nhe and the monitor also switches on but it only displays a blue blackish screen 😭😭
@PC monkey, you just saved me some couple of bucks. I realized my LCD screen was not working, so with your guide, I discovered the LCD cable has pulled out. So I just had to reconnect it. Thank you
Thank you so much.. This just helped me, and I don't have to take my laptop for repair. And from your other video, I've realized that it's possible the technician stole one of my drives, but it's alright. You're great
Thanks a lot for this - My laptop started glitching after it fell and there were blue and yellow artifacts all over. Didn't even have to undo any cable, just pushed them all again and it worked. Couldn't have done it without this guide though
I found your video very helpful. Thanks for posting it. Here's ANOTHER FIX to ad to the mix. My wife's laptop screen was flickering and going on and off with the least amount of movement of the screen. I figured it had to be a loose cable connection or a bad wire in the cable. While unfastening the screen, I left the screen running so I could see what made a difference as I touched things. The 2 bottom screws that hold the screen in were tight. THE 2 TOP SCREWS WERE LOOSE as could be. Just for the heck of it, I tried snugging those 2 screws up, and Voila!! The screen came on bright and consistently stayed on while moving it up and down!! It turned out to be a poor ground related to the 2 top screws! My wife is thrilled to have her computer up and running again.
Very helpful! Curious, how to know which needs replacing, the LCD screen or cable? On my laptop, for example, having screen issues (getting stripes or pale colors) when I adjust the angle. What's the easiest way to diagnose which is the culprit? Thanks in advance!
Try the external monitor test as described here in this video. Do the stripes show up there too when you adjust the angle of the laptop monitor? Its most likely a loose or bad LCD Cable or a bad LCD. No way really to know which without replacing them one at a time.
Wow, I can't believe it, it's my computer and I have this problem of conexion. I think I will try to fix it. The cable is not working properly because is to tight and the screen images trembles till I move a litle. Thanks a lot for the tutorial.
You have the best repair videos I've seen...my Toshiba Satellite circa. 2007...I'm ready to attempt a black screen fix...the screen blacked out progressively upon angle, working fine but got closer and closer to closing....then no screen at all...seemed like hinge and LCD cable where problem lay?...no mentions of progressively losing screen in relation to angle it was opened...Do u think it's a cable issue?order new one by opening????
Bro really thanks you so much for your videos! I have an issue that my laptop turns on but stay black the screen I tried what you said in the other videos but the issue is still there, but it’s weird cuz some days works and others don’t, and the same with the webcam, do you think is the cable or the lcd screen?
For a computer that turns on but the display does not work, try this video first; th-cam.com/video/u-REPLdpZ70/w-d-xo.html Let me know how that goes :)
Its just a small metal pry tool. There are a bunch of different kinds. The one I use is similar to this one; www.amazon.com/Spudger-Opening-Samsung-opening-Stainless/dp/B07CHDGTVD/ref=sr_1_16?crid=3IZEJ13FMIWPN&dchild=1&keywords=computer+metal+pry+tool&qid=1634928404&qsid=134-4931834-0468625&sprefix=computer+metal+pry+tool%2Caps%2C90&sr=8-16&sres=B074YHS3GW%2CB015CMAJVK%2CB012P07V0E%2CB07ZR9BQCK%2CB01F52ZPBQ%2CB014LR8CTS%2CB07X1M9M55%2CB06XNPRL42%2CB0741PYY6D%2CB07PB3PW53%2CB01HT1BW0E%2CB07CHDGTVD%2CB081PTCKY1%2CB06XHG3G33%2CB071LDN61H%2CB01GNZY5OM
Thanks for the video! If the LCD cable connector that connects to my motherboard is 40 pin, does that mean the one on the back of the panel is a 40 pin as well?
This video shows how to replace an LCD in a Lenovo computer; th-cam.com/video/9Jtos06Vix0/w-d-xo.html However, all models will have differences. What model do you have?
Hi, that’s very good. In my Toshiba satellite the screen goes black off and on when I am moving the flap. So I think it’s just a cable, either lose or disconnecting. The idea of replacing the whole cable seems like too much… is it easy to buy a new one
Yes, if your screen goes black when you move it, my first guess would be a lose LCD Cable. I would first try unplugging it and then plugging it back in at both ends. Its easy to buy a cable :) If you tell me the model Toshiba you have, I can see if I can find one. I usually use Ebay, Amazon, etc for computer parts
really straight forward tutorial. but i have some questions 1-my laptop is an acer a315-42 r772, and i cant locate any screws or stickers to remove the bezel 2-my laptop suddenly got all green and pink with vertical and some horizontal lines. do you have any idea how to solve this? or do i need to do the external monitor test?
May I ask for help for my laptop screen problem? My laptop screen suddenly turn green and have ghost image left on it. It used to happen a year ago and it was fixed by replacing with a new display-panel. Before buying a new display-panel again, I am doubt that is the connecting cable be the root cause? Can the symptom tell the problem is from display-panel or connecting cable? Anyway, thanks for your videos! I learn a lot from them!
1. Can you try hooking up to an external monitor? Does the issue continue there? 2. You can try unplugging your LCD Cable at both ends. Then plug them back in, taking care to insure they are correctly plugged in and secure.
Depends where you live and what they have to do in order to fix it. Some shops will charge a diagnostic fee to find out what is wrong. At my shop on East coast America, I charge $45 for that. However, I wave that fee if they fix the computer with me. I would then charge $75 per repair plus parts.
Hey I love your video, I do have a question I hope you can help me. I'm trying to replace the display cable on my laptop. How would I go about getting anther wire, I already found the model number on the display (nv173fhm-n44 ), is it I need to find the right pin count or is there an exact wire based on the display? Thank you in advance
I usually get my parts on sites like Ebay, Amazon, etc. You can usually just search for your brand, model number, and 'lcd cable'. Thats usually enough to get the correct part. Just make sure visually that its the same before purchasing it :)
Thanks for the great video! I was wondering if you could elaborate on diagnosing whether a problem is with the LCD cable or the screen. So far I know it works with an external monitor and the touch interface works, but the screen is completely black.
Then it could be either. There really is no way to tell which part it is as both part are after the motherboard. You just need to replace one. Usually the Cable as its the cheaper component.
1st, that was an informative video, very well presented. I have an Asus X543UA. My screen still has power, but no image at all. Mostly black, but there are white strips across the screen (mostly at the top). I'm assuming that the cable needs to be replaced or maybe even just secured back in place 🤞 Any model specific tips and/or advice is needed & would be a life-saver. Even if your advice is to tell me to take it in to a technician for repairs
Hopefully this helps access the LCD and LCD Cable; th-cam.com/video/RwxYM6jrYuw/w-d-xo.html Are you able to hook up to an external monitor to see if the issue is there as well?
@@juankruger2598 That would usually indicate that the issue is with your LCD Cable or the LCD itself. I would try to 'reseat' the cable at both ends. If that does not help, replace the LCD and the LCD Cable one-at-a-time until you find the one that is bad.
hello ..thanks for the video; it was helpful i have problem with my laptop lcd and i dont know what can i do for it or how! there are some lines in the lcd and a gray background without any image; sometimes when i move the lcd, i have my desktop but it will disappear quickly! should i open my laptop or what can i do ?😞🥺 actually i want to know what is going on before i take it to a repairman ...
Not sure if I understand your issue correctly. For a computer that turns on but the display does not work, try this video first; th-cam.com/video/u-REPLdpZ70/w-d-xo.html Let me know how that goes :)
Hey I'm about to perform this with our laptop, just needed some clarification if swapping out the cables will help solve this problem ? Thanks a bunch!
Hi! Thank you do much for this video, my laptop turns on, i Can see the letters on the screen but its just toooo daaark i can’t see much but They’re distinguishable so the lcd works? Also when I connect to a tv or monitor it works perfectly do you think it might be the lcd cable too? My computer is a es1512 acer 🥺 little oldie
Yes, it could be the LCD or the LCD Cable. I would try unplugging the cable at both ends and then plugging it back in, making sure its not just loose. If that does not help, one of them may be bad. I would replace the LCD and the LCD Cable one at a time until I found the bad one.
..long story short Hinge on my laptop broke and punctured this screen/lcd wire. 2 of the (TINIEST I've ever seen) wires are sliced. Would it be 'safe' to try splicing them? P.s. you explain things wonderfully. So glad to find you! ☆new subscriber•
Thanks for the video. From an newer Insignia LCD digital television I removed the LCD, to test it plugged it in again and it worked. Because I’m making a no-backlight LCD, so the screen is more transparent as done on another TH-cam video I peeled off the filter, held it up to the light and I don’t see any screen cracks. I was extremely careful to make sure the LCD cable wires were not damaged. The monitor power indicator goes on but the LCD doesn't show any image when I turn it on now. Do you know what I may have done? May I please know if my TV Insignia LCD is broken since I removed the monitor cable but the thin metal fastener clip housing on the outside of the cable outlet on the LCD bus strip fell off that the monitor cable plug pin-strip plugs into on the LCD bus strip cable outlet? Is it possible if the television electronic circuit board is screwed back in with other screws from the assembly that fit for some electronic reason something will not work quite right?
Great video! I fix a lot of laptops with minor issues and or just need screens replaced. But i have an odd one that maybe you'd be able to shed some light on. I have a Toshia P55w-B5112, which the screen is black but the touchscreen still works when connected to an external monitor. I checked the RAM, and because this PC doesn't have a separate CMOS battery (it's built into the main battery) i disconnected the main battery and still no love. I checked the connection of the video cable to the motherboard which is good. I haven't checked the connection on the back of the monitor yet, because it looks like its going to be a bear, and before i move forward with that figured i would see what you thought. Any insight you can provide is greatly appreciated...Thanks
@@PC_Monkey I know that sounded a bit confusing. The laptop monitor is black (nothing appears). I connected a external monitor to the laptop and i can see the image perfectly. If i touch the laptop screen the touchscreen works because whatever i select opens or closes on the external monitor. I just dont get anything on the actual laptop screen. Hope that makes sense.
@@Casinoslotguy Sounds like the LCD on the laptop is dead and needs to be replaced. Sounds like motherboard and touch screen is fine. That would leave the LCD itself
Very informative on every step. On the bottom of my screen there is some blurly blinking, how can i know if its the LDC or cable problem? Thanx in advance.
@@jimmyakande2905 Ya, if the computer displays to an external monitor but not to its own LCD, your most likely looking at a bad LCD or LCD Cable. I would try 'reseating' the cable at both ends first. If that does not help, replace them one at a time until you find the issue :)
Hello this is a late comment i hope you can reply. My laptop is the hp omen 17 inch so i am having problems with the screen. So the perfect way to explain it is now it's showing as a broken hdmi connected to the tv like the lines and all that. I don't know if it is a wire problem or the lcd screen itself please can you tell me how to differentiate or if I have to open it up. Thank you
Without specialized equipment, its very difficult to tell if its an issue with the LCD Cable or the LCD itself. Most people would simply replace them one at a time to see which one it is. Many sellers on sites like Ebay, Amazon, etc offer free returns for any reason so you can always return the one that you dont need if you get both and only need one
Hey, great video...MY laptop screen works well but ,in intervals....it works perfectly fine for a week, then the next day I turn it on ...it doesn't work...I tried every method possible to fix the issue and I don't feel comfortable to replace it if my screen is working but It rarely works sometimes. Tried unplugging the tape but I feel like I might mess up ....the cable is pretty entact...pls let me know if you any software related or hardware related tips to this problem.thx.
Good video. When I turn on my computer, some times the screen comes right away, other times too it doesn't. Unless I try to touch where the LCD cable passes before it comes and even that it goes off and on. Is the lcd cable damaged or when could be the problem? Thank you
For a computer that turns on but the display does not work, try this video first; th-cam.com/video/u-REPLdpZ70/w-d-xo.html Let me know how that goes :)
This was great. Except for the highly anticipated Replace portion. I was just dying to view the missing minute where you show us how to reconnect the 40 pin back to the new screen. I am intimidated by not knowing which orientation to apply pressure from the ribbon cable connector onto the fitting on the laptop screen itself. If I come at it the wrong way will I crush the pins? Top down? Slide it in/on? Otherwise outstanding job on this video.
Hi. Thanks for the clear instructions. However I just dropped my laptop and everything works fine except the screen is dark. I am writing this massage on an external monitor and everything is clear on the external monitor. So do you think it is a screen issue or cable. Mind you the screen has 2 small cracks due to the fall.
Yes, if an external monitor works well, it means there is nothing wrong with the signal coming from the motherboard. Only an issue with either the LCD or the LCD Cable. Try unplugging the cable at both ends and plugging back in. Perhaps its just loose. If thats not it, one or both may be bad. Most likely the LCD if you just dropped it :(
If only I watched this before trying to install a new display... I unfortunately pulled too hard and some wires came out of the connector. I think I should buy a new display cable right? Or do you reckon the connector can be repaired? And by any chance, would you happen to know of 3rd party sellers for a display cable for the HP Elitebook 830 G8? HP sells them for £110...
Yes, if you pulled the wires out of the plug in the LCD cable, it most likely needs to be replaced. I usually get my parts on sites like Ebay, Amazon, etc. Would you like help locating one?
Hi, Thank You for the guidance. I have a lenovo IdeaPad Y700 It fell of little bit while taking it out of my cupboard. Not severely. It was working before this incident perfectly. Laptop works, it also works on another monitor. Screen looks perfect. So I think the problem is either with LCD cable connection in LCD or motherboard which probably became loose or something might have broken. Could you guide on checks ? And also give a general idea on expense ? 1. If it only disconnected 2. If there is something broken ( what could it be ? ) And how much it should cost? Is there any thing else that might be a reason eg some light bulb or anything? I may not do everything myself as I never opened a laptop before ( am nervous ) but I don't want to get cheated. So want to know a fair cost of repairs in either case. And exact steps so other portions remain untouched.
If its working with an external monitor, then its most likely an LCD or LCD Cable issue. I would try reseating the cable from both ends first. If that does not help, replace them one at a time depending on the cost and ease of replacing each. What size is your computer screen?
Hi, great video. I have a Lenovo Ideapad 330. Every time I adjust the lid, the screen goes black but then comes back on after a lot of re-adjusting. Does this sound most likely to be the LCD cable whether loose or in need of replacing?
Thanks for the video, having lcd issue with my Asus TUF FX504GD, the display works on an external monitor and the laptop screen flickers (but no display, I can see backlight). So can you let me know if my lcd is damaged or the cable?
If the computer displays fine to an external monitor but wont to its own LCD then yes, your most likely looking at a bad LCD and / or LCD Cable. I would first try to 'reseat' the cable at both ends. If that does not help, replace them one at a time till you find the one that has the issue
I have a Asus FX503vd. While the computer is running the left side of the screen turns pale almost white and when I touch it from the back it turns good again. I guess the problem is the cable that you mention here and it became somehow loose. But are these cables standard, or do any company has its own type of cable? Thanks for the video!
Is this your cable? www.ebay.com/itm/254819224560?_trkparms=ispr%3D1&hash=item3b5468cbf0:g:xG0AAOSwoZFgGOXb&amdata=enc%3AAQAGAAACoPYe5NmHp%252B2JMhMi7yxGiTJkPrKr5t53CooMSQt2orsSg3Ye8yTWgOW7pmE1t838dlkO454JqL4P7a5YYZ5drGoGLoL4JiISWvWx%252BCjADfhU00vm%252BVISprBiDvzOT%252BTBPtRH5ygioDY3GtpBSXfoRz4X%252FrGccLLeZbqVlLJUcb7r%252FdYkCBMpAAtcV3eTcKuGSYX%252BUemqFxm2lt4CFKuVvlCuGcnISDbb4%252FI0Z8M6S1ll9ajNb0SjtJs9KbCAgviD9jUogv5wR655cM%252FMOdyB89GagbtJyC7dVqU3%252BAF0s7qwP9YgrsANUmi6n10%252FUeQNfj9E%252Fmjz0xWCnKRULxXcqq%252FKB9tngWCQp63J2Qa%252FlTFXX1hMlK%252BoyLGG%252Bsj0diu3THYziXzlHmzfYNTJKm4Ef4wiiPNUrLipb1BP3B3zzkW0W3Cx05fVODvrIl6y0qvT3uzv1KzpzqOPkq3ddkmRiAOlrKHK5vJeX8m9dyZk%252FJyZ8g6w5iDyHKAozx6Yaelr02U55oQ0tUMJWorNsftnS80D0CNmaV7khbvnXtdyCWVtLg1eKfm%252F7No5CQLRDZt7ptQfZj10mo6jxdvrVnHpHkXUGXdDK%252Bacy%252FeFJ82vjIQeNWKIxf%252BT56DcFqANjmfmLosTq3%252BoVHznzlHe2FAGBcAuEGvfvpmyNPyvLvFdnhTbY1Dw4gLhctqyJ19WsEb1Fe8ahvuRm1pavEPzzMuUgSdriAk9liFNcAeI0VrDrJUNMebn90h9GmyqSA3T6MKp1M7DikmTvoITB60sH8uvB6XGfZX%252F7BS7%252FMScJT9Hzt%252BQj1SUDizIfifIf413w8igp9RW%252FfE7AJVELy71XpJMhAzAHfkFlO4JxV0FRFOM2zqwIfWnLfnxY9YKfY%252FafNw3GA%253D%253D%7Cclp%3A2334524%7Ctkp%3ABFBMpLvd-Zdf
Thank you for your extremely helpful video. Please, every time I try remove this plastic bezels, some of the clips break. I do it so soft. I do not understand what I am doing wrong. Could you please give me some advice in order not to have any loss? Thank you!
Its hard to know what exact shape the bezel clips are before you get into it so its hard to put pressure in just the correct spot to avoid breaking at least some clips. I find it helpful to insert the pry tool directly next to the clip when ones location is identified, and push in and up. However, even with a lot of experience and doing it right, some clips may always break.
@@PC_Monkey Thank you for replying my question. Your information and advice is totally helpful !! Keep doing your extremely great videos that help us, inform us. Thank you for your time reading and answering my question !!
Will this help HP touchscreen laptops? The hinges broke, we replaced them and now we have the black screen but computers runs. Trying to connect with hdmi to another monitor to check too. Thank you for your videos.
Did the screen work well before you replaced the hinges? If so, its possible something is lose or damaged. What was the result of the external monitor test?
Thank you for the tutorial! I want to ask tho if my laptop has one green line when the screen is black and the line changed to pink when the screen is white, do I have to replace the LCD or just the cable?
@@Intania123 That means its most likely an issue with your LCD or LCD Cable. Try reconnecting the LCD Cable at both ends to see if its just a lose connection. If that does not correct the issue, replace the Cable and the LCD one at a time until you find the one with the issue
Hello, thank you so much for your video. I was following you with my Acer CB311-11H Chromebook but you didn't show how to take the LCD Video cable all the way off once it's disconnected. I broke mine while changing my screen. Can you please tell me how to disconnect it and then reconnect the video cable. Thank you so much and have a great day.
You wish to remove the LCD cable from the motherboard as well as from the LCD? If you are just replacing the LCD, there would be no need to unplug the cable from the motherboard.
I had to go through a lot of bad videos to find yours. Well done, and thank you. Yes: I have a question my (Acer M5-583P) started flickering and white out problems all of a sudden. It happens if I push or pull the lid to adjust the view angle. I got online, and followed some of the suggestions about uninstalling the video drivers, and disabling MS Error Reporting and such. No help there. If I don't move the lid is seems to be OK. So I pulled the back and checked the LCD cable connection to the MB. It seems fine. No fray on cable. Fits tight on harness. It must be either shorting in the hinge, or maybe the harness in the LCD is loose? Do you have any ideas....PS, it has not been dropped or bumped hard that I'm aware of. Thank you for any help. Wish you well.
Hi. Great vid. I have a Fujitsu A544 and had an accident with the screen .I threw a pen at the screen which resulted in half the screen working and the other half not. Worked through the TV fine with HDMI. Reseated the LCD cable to the screen and when I turned it on went immediately white.. Now the screen is just blank but still works through the TV and still won't come on. Was this a power thing? Would you replace the screen?
Thank you for your informative videos. I have a Dell Vostro 1500 and want to replace its LCD 15,4". I have found a LCD 15,4" of a DELL Latitude D820 and wanna buy it. I wonder though if I can replace mine with it? I appreciate your response in advance.
It will mostly depend on the connector in the back. It has to be in the same location as the one on yours and it has to be the same pic count. Usually 30 or 40 pins.
@@PC_Monkey Thank you very much for your response. I have my Dell Vostro 1500 with me and wanna buy "the LCD of Dell Latitude d820" online; is there a way to know if the LCD will match my laptop before buying it? What should I ask the seller exactly (before buying it ) so that I I make sure the LCD will be compatible with my Dell Vostro 1500?
@@AminValipour Is there a rear view of the LCD that your thinking of buying? Look and see where on the back the port is. It should match the location of yours. Also, the listing should say if its a 30 or 40 pin. If not, message the seller and ask.
Thankfully To heaven I had the same model: Toshiba Satellite c55-c, the same issue with my lcd cable etc. At last I can say that this model won’t be in my top 10 recommendations.
Nice job....but mine is a Lenovo Enhanced Experience 3 inbuilt Desktop. I'm also experiencing the same black screen problem and have tired the first methods but want to believe it's the LCD cord because it displaying on my flat screen TV but has refused to display on its own screen.
If it works on an external monitor the the problem is most likely with your LCD or your LCD Cable. I would replace the cable first as its a cheaper part :)
I am currently rebuilding a Toshiba Satellite L350D. Can you show how to get to the LCD cable to put a new o ne in please? This surround looks pretty solid.
Does your current cable plug in with the assistance of thermal tape? If so, its best to use it. However, its not absolutely necessary. The computer will still work without it :)
Your videos are super helpful and my laptop in particular has pink screen all over the lcd. Sometimes the lcd is fine upon startup but after a few seconds, it goes back to the pink screen. I had it checked in a local tech shop but its pretty obvious he was emptying my pockets to get it fixed as with other local tech shops near my area. Help? ☹
Have you tried hooking the computer up to an external monitor? Does the problem continue on the external? If not, you most likely need a new LCD. For most computers, you can get a new LCD for around $30 USD and install it yourself.
@@PC_Monkey Hi. Hope you're in good health amidst the pandemic. Anyway, the issue doesnt continue on my tv or other external monitor. A new lcd might be it but Im tossed different infos from local techs. I guess my question now is, do you have any tips where and how to find reliable lcd's? Does it really have to be the same brand? Thanks for answering! Really appreciate it.
@@Giggity03 I usually get most of my computer parts on ebay and sometimes on amazon. No, it does not have to be the same brand. It has to be the same size, for example, most laptops will take a 15.6 inch screen. The back connector pin has to be the same size, either a 30 pin or 40 pin usually and the location of the connector pin has to be in the same place so the LCD cable can connect to it.
@@PC_Monkey Ayt, thanks so much man. Your videos really helps me and my little brother since I also recommend your videos to him. Keep safe man and have a great start of the year!
Video #4 "replacing LCD/Cable - is there anyway to test cable - LCD turns on (sometimes) but goes back to gray if change angle hinges - believe it is a damaged cable? ASUS S300C. Have not tried external monitor, but believe it will show good. Is there some testing before opening and guessing?
My screen has like green lines and when the screen if turned off you can see darker spots on the screen, does changing the lcd cable help with this or do I need to buy a new screen or both? PLS I NEED HELP
The LCD Cable usually runs from the LCD to the Motherboard through the left side Hinge Assembly. You can see him unplug it here at 3:19 th-cam.com/video/mfGOQ0PBFRM/w-d-xo.html
Followed all your suggestions in videos for black screen,can hear noises (3 clicks but no fan noise) but no display on laptop but will work on an external monitor via HDMI cable. Replaced LCD cable today. Still not working on laptop. Does this mean a new screen? Laptop is 7 yrs old Toshiba Satellite so wouldn't be surprised
Yes. Most likely if your computer displays to an external monitor, then the issue is your LCD or LCD Cable. If replacing the LCD Cable does not help, the next step would be the screen
Can I do this whole thing while my computer is running? I know you said the computer should be off when replacing LCD panels but I'll just be adjusting/checking some loose connections and I want it to be open because there's a certain image when opened makes the whole screen flicker. Edit: Nvm I seemed to have fix it!!! Thanks!!!!
I am experiencing single vertical line on my laptop, I don't know whether the problem is from chip or ribbon cable, or maybe graphic drivers. Could you help me by any chance? Best regards.
Its a month ago, but writing troubleshooting steps anyway because they might be helpful to someone else. First thing you do is hook up the laptop to a tv or monitor and see if it displays correctly. That tells you all the hardware is functional, except for the screen. If it is indeed just the screen, check if gently pushing on the back lid of the screen while tilting the screen has any effect on the type of distortion you're seeing. If it does, it's almost certainly the connector that just needs reseating. If it doesn't, try and take out the lcd cable as shown here, and inspect it carefully along the entire length, from end to end. If there's no visual clues, bend it gently on multiple places to see if it has snapped anywhere. If the cable looks good as well there's two options. First is to order a replacement cable which might either fix the problem or tell you its definitely the lcd panel that's broken. Second is just immediately RMA the laptop or order an entire new screen + cable combo for that laptop. Or maybe it's finally time for that upgrade you've wanted.
Thanks for watching! Please consider subscribing to my new channel here: www.youtube.com/@jamminpcs.
I'm trying to move the easier hardware stuff there so that I can focus on the more in depth troubleshooting and diagnostic videos here :)
3 years later, you’re still helping others. Thank you so much! I think my LCD was just slightly unplugged so thanks again for this!
Glad your all set :) Always here if needed !!
Thanks so much for this video! My LCD was not working but when I took my laptop apart based on the instruction in your video, and blew some air around and wiggled the cables it started working properly again. Because of the video I had the confidence needed to start the repair!
Great to hear !! Always here to help :):)
me too i was facing the same issue thanks so much very helpfull
It's my first time doing hardware repairs and it was perfect following you. 😊
Great to hear !! Always here to help :):)
Very good video! As an experienced desktop tech, I was very much aware that you thought of everything where a tech could make a simple mistake. Your warnings and suggestions on how things could be different, and the pitfalls of assuming that just because we have years of experience, to assume nothing and do your homework, Thank you very much.
Thanks for the compliments :)
I was lost at what to do. Didn't realize you had to lift the black clip until you showed me lol. Thank you
Happy to help :) Always here if needed !!
This was a lifesaver, thank you!
Great to hear !! Always here to help :):)
@@PC_Monkey who would have though it would be that easy 😂
@@josifz1046 Sometimes it can be :) Those times are great !!
@@PC_Monkey hp laptop black screen after it was a bright white with streams of colors
I don’t make comments on TH-cam. But thank you sir. I don’t know much money you have saved me but I know it’s a lot. And I have learnt a lot too . I just removed and inserted it in and boom! Back to life
Glad your all set :) Always here if needed !!
My cable was abraded from rubbing the hinge bolt and failed. You took a lot of the pain out of this repair, thank you!
Great to hear !! Always here to help :):)
Does that cause the screen to go incoherent, like flashing multi-colours? Mine even goes nuts when black images or backgrounds are on the screen.
@@PC_Monkey Hey bro, my pc fell but not so hard and right now it turns on and I can see the screen is working but brightness is too low to a point where by I have to use direct light to see the content
@@nkululeko7381 1. If the compute fell, its possible the LCD or the LCD Cable were made loose. I would think about going inside and making sure the LCD Cable is secure by unplugging it at both ends and then plugging it back in.
2. For a computer that turns on but the display does not work, try this video first; th-cam.com/video/e9iy30J00-k/w-d-xo.html
Let me know how that goes :)
THANK YOU, VERY HELPFUL. I HOPE I CAN GET THIS CABLE SOON SO I CAN TRY DOING IT ON MY OWN, RIGHT NOW MY LAPTOP IS CONNECTED TO A TV SCREEN.
Happy to help :) Good luck !!
@@PC_Monkey Thank you so much, I did not buy a new cable. I just removed it and re-inserted it back on, Turned my laptop on and boom, My screen came back to life again.
@@onesounder Very often, re-seating, parts helps as they do come loose sometimes :) Well done !!
@@onesounder ekse my brother what was wrong with ur PC from the get go¤¤¤cz mine switches on nhe and the monitor also switches on but it only displays a blue blackish screen 😭😭
@@streetfighter4119 it had a black screen but was working when I turned it on with nothing displaying on screen.
Thanks, I had a blank screen issue on my HP. Removed the LCD and reseated the connector like you showed and that fixed it.
Happy to help :) Always here if needed !!
@PC monkey, you just saved me some couple of bucks. I realized my LCD screen was not working, so with your guide, I discovered the LCD cable has pulled out. So I just had to reconnect it. Thank you
Glad your all set :) Always here if needed !!
This guy deserves more subs... Love you my man...
Happy to help :) Always here if needed !!
You got my sub
Thank you so much.. This just helped me, and I don't have to take my laptop for repair. And from your other video, I've realized that it's possible the technician stole one of my drives, but it's alright. You're great
Happy to help :) Always here if needed !!
Thanks a lot for this - My laptop started glitching after it fell and there were blue and yellow artifacts all over. Didn't even have to undo any cable, just pushed them all again and it worked. Couldn't have done it without this guide though
Glad your all set !! Always here to help :)
Thanks man your life saver!! My laptop fell down i thought display is dead and i try this now it's working thanks so much!!
Happy to help :) Always here if needed !!
Hey man, just wanted to say you are a godsend. Seriously helped me out. Thank you.
Happy to help :) Always here if needed !!
YOU SAVE MY LIFEEEE, IVE BEEN TRYIN TO FIND OUT. OMG THANK GOODNESS
Glad your all set :) Always here if needed !!
@@PC_Monkey i subscribe u tho 🙏🙌
@@unknownsowhat6310 THX :):):)
I found your video very helpful. Thanks for posting it.
Here's ANOTHER FIX to ad to the mix. My wife's laptop screen was flickering and going on and off with the least amount of movement of the screen. I figured it had to be a loose cable connection or a bad wire in the cable. While unfastening the screen, I left the screen running so I could see what made a difference as I touched things. The 2 bottom screws that hold the screen in were tight. THE 2 TOP SCREWS WERE LOOSE as could be. Just for the heck of it, I tried snugging those 2 screws up, and Voila!! The screen came on bright and consistently stayed on while moving it up and down!!
It turned out to be a poor ground related to the 2 top screws! My wife is thrilled to have her computer up and running again.
Nice work and thanks for the comment :)
Such a good video. I have never done anything like this in my life. Feeling very empowered right now and ordering a new ram! Thanks! Linda x
Great to hear !! Always here to help :):)
thanks this helped a lot with my wifes acer switf 3 loose cable connection its up and running again display fully function thanks
Great to hear !! Always here to help :):)
I have to remove cable from lcd.. its works. Thank you!!!
Glad your all set :):) Always here if needed !!
Cable loose on motherboard. Thanks for the great videos. PC Monkey the best!
Happy to help :) Always here if needed !!
Thank u very much i fixed my laptop using your help ❤️❤️❤️
Happy to help :) Always here if needed !!
Very helpful! Curious, how to know which needs replacing, the LCD screen or cable? On my laptop, for example, having screen issues (getting stripes or pale colors) when I adjust the angle. What's the easiest way to diagnose which is the culprit? Thanks in advance!
Try the external monitor test as described here in this video. Do the stripes show up there too when you adjust the angle of the laptop monitor? Its most likely a loose or bad LCD Cable or a bad LCD. No way really to know which without replacing them one at a time.
I don't know how to thank you♥️♥️ that helped sooo much
Happy to help :) Always here if needed !!
This was sooooo helpful thank youuuuu😭
Great to hear !! Always here to help :):)
Thank you. Helped a lot.
Great to hear !! Always here to help :):)
Wow, I can't believe it, it's my computer and I have this problem of conexion. I think I will try to fix it. The cable is not working properly because is to tight and the screen images trembles till I move a litle. Thanks a lot for the tutorial.
Your welcome !! Happy to help :)
You have the best repair videos I've seen...my Toshiba Satellite circa. 2007...I'm ready to attempt a black screen fix...the screen blacked out progressively upon angle, working fine but got closer and closer to closing....then no screen at all...seemed like hinge and LCD cable where problem lay?...no mentions of progressively losing screen in relation to angle it was opened...Do u think it's a cable issue?order new one by opening????
Bro really thanks you so much for your videos! I have an issue that my laptop turns on but stay black the screen I tried what you said in the other videos but the issue is still there, but it’s weird cuz some days works and others don’t, and the same with the webcam, do you think is the cable or the lcd screen?
For a computer that turns on but the display does not work, try this video first; th-cam.com/video/u-REPLdpZ70/w-d-xo.html
Let me know how that goes :)
Very helpful!
Thank you for the tips, liked!
Happy to help :) Always here if needed !!
Love what your doing!!!
Thanks !! Glad this video was helpful :):)
I didn't make out the name of the prise tool, is it a rare item? I have stayed with Desktops thus far! I liked the business approach as well thanks.
Its just a small metal pry tool. There are a bunch of different kinds. The one I use is similar to this one; www.amazon.com/Spudger-Opening-Samsung-opening-Stainless/dp/B07CHDGTVD/ref=sr_1_16?crid=3IZEJ13FMIWPN&dchild=1&keywords=computer+metal+pry+tool&qid=1634928404&qsid=134-4931834-0468625&sprefix=computer+metal+pry+tool%2Caps%2C90&sr=8-16&sres=B074YHS3GW%2CB015CMAJVK%2CB012P07V0E%2CB07ZR9BQCK%2CB01F52ZPBQ%2CB014LR8CTS%2CB07X1M9M55%2CB06XNPRL42%2CB0741PYY6D%2CB07PB3PW53%2CB01HT1BW0E%2CB07CHDGTVD%2CB081PTCKY1%2CB06XHG3G33%2CB071LDN61H%2CB01GNZY5OM
Thanks for the video! If the LCD cable connector that connects to my motherboard is 40 pin, does that mean the one on the back of the panel is a 40 pin as well?
Yes :)
Do you made same video on any lenovo laptops?? If yes ,can you please provide the link
This video shows how to replace an LCD in a Lenovo computer; th-cam.com/video/9Jtos06Vix0/w-d-xo.html
However, all models will have differences. What model do you have?
Thanks a lot🤩🤩
@@techieonline1568 Your welcome !! Happy to help :)
Hi, that’s very good. In my Toshiba satellite the screen goes black off and on when I am moving the flap. So I think it’s just a cable, either lose or disconnecting. The idea of replacing the whole cable seems like too much… is it easy to buy a new one
Yes, if your screen goes black when you move it, my first guess would be a lose LCD Cable. I would first try unplugging it and then plugging it back in at both ends. Its easy to buy a cable :) If you tell me the model Toshiba you have, I can see if I can find one. I usually use Ebay, Amazon, etc for computer parts
really straight forward tutorial. but i have some questions
1-my laptop is an acer a315-42 r772, and i cant locate any screws or stickers to remove the bezel
2-my laptop suddenly got all green and pink with vertical and some horizontal lines. do you have any idea how to solve this? or do i need to do the external monitor test?
Does this help access the LCD? th-cam.com/video/Ar9OGg-9dvM/w-d-xo.html
Yes, I would try the external monitor and see what the display is like there
Methodical instructions. Thank you! Please provide similar demo for Dell 5558 laptop. Want to check LCD cable connection on either end.
I dont have one on that specific model but I found this video that may help; th-cam.com/video/xc9Zb7J47Ak/w-d-xo.html
hi
i don't know how i can fix my sister Samsung Notebook 7 spin NP740U5L hinge and new LCD cable!!
you are really amazing thank you 🌹😘
Happy to help :) Always here if needed !! Nice job !!
May I ask for help for my laptop screen problem? My laptop screen suddenly turn green and have ghost image left on it. It used to happen a year ago and it was fixed by replacing with a new display-panel. Before buying a new display-panel again, I am doubt that is the connecting cable be the root cause? Can the symptom tell the problem is from display-panel or connecting cable? Anyway, thanks for your videos! I learn a lot from them!
1. Can you try hooking up to an external monitor? Does the issue continue there?
2. You can try unplugging your LCD Cable at both ends. Then plug them back in, taking care to insure they are correctly plugged in and secure.
Thanks man! Helped a lot.
Great to hear !! Always here to help :):)
How much should a simple LCD replacement/loose connection cost to repair from a shop?
Depends where you live and what they have to do in order to fix it. Some shops will charge a diagnostic fee to find out what is wrong. At my shop on East coast America, I charge $45 for that. However, I wave that fee if they fix the computer with me. I would then charge $75 per repair plus parts.
Hey I love your video, I do have a question I hope you can help me. I'm trying to replace the display cable on my laptop. How would I go about getting anther wire, I already found the model number on the display (nv173fhm-n44 ), is it I need to find the right pin count or is there an exact wire based on the display?
Thank you in advance
I usually get my parts on sites like Ebay, Amazon, etc. You can usually just search for your brand, model number, and 'lcd cable'. Thats usually enough to get the correct part. Just make sure visually that its the same before purchasing it :)
you saved my screen, many thanks!
Great to hear !! Always here to help :):)
Super helpful thanks man
Your welcome !! Happy to help :)
Thanks for the great video! I was wondering if you could elaborate on diagnosing whether a problem is with the LCD cable or the screen. So far I know it works with an external monitor and the touch interface works, but the screen is completely black.
Then it could be either. There really is no way to tell which part it is as both part are after the motherboard. You just need to replace one. Usually the Cable as its the cheaper component.
@@PC_Monkey, thanks for the advice!
@@michaeleyler1746 NP !! Good luck :)
Great tutorial video very helpful . Thank you
Your welcome !! Happy to help :)
1st, that was an informative video, very well presented. I have an Asus X543UA. My screen still has power, but no image at all. Mostly black, but there are white strips across the screen (mostly at the top). I'm assuming that the cable needs to be replaced or maybe even just secured back in place 🤞 Any model specific tips and/or advice is needed & would be a life-saver. Even if your advice is to tell me to take it in to a technician for repairs
Hopefully this helps access the LCD and LCD Cable; th-cam.com/video/RwxYM6jrYuw/w-d-xo.html
Are you able to hook up to an external monitor to see if the issue is there as well?
@@PC_Monkey External monitor works. I've been using that in the mean time
@@juankruger2598 That would usually indicate that the issue is with your LCD Cable or the LCD itself. I would try to 'reseat' the cable at both ends. If that does not help, replace the LCD and the LCD Cable one-at-a-time until you find the one that is bad.
Excellent video!! Will be using this to replace an LCD cable shortly. A bit scary, wish me luck ;)
Good luck !!
What if the battery is built in? Should we still take it out inside the laptop? Or just let it there then replace the laptop screen?
hello ..thanks for the video; it was helpful
i have problem with my laptop lcd and i dont know what can i do for it or how!
there are some lines in the lcd and a gray background without any image; sometimes when i move the lcd,
i have my desktop but it will disappear quickly! should i open my laptop or what can i do ?😞🥺
actually i want to know what is going on before i take it to a repairman ...
Not sure if I understand your issue correctly.
For a computer that turns on but the display does not work, try this video first; th-cam.com/video/u-REPLdpZ70/w-d-xo.html
Let me know how that goes :)
Hey I'm about to perform this with our laptop, just needed some clarification if swapping out the cables will help solve this problem ? Thanks a bunch!
I actually meant to switch the cable heads, hopefully that clears it
Hi! Thank you do much for this video, my laptop turns on, i Can see the letters on the screen but its just toooo daaark i can’t see much but They’re distinguishable so the lcd works? Also when I connect to a tv or monitor it works perfectly do you think it might be the lcd cable too? My computer is a es1512 acer 🥺 little oldie
Yes, it could be the LCD or the LCD Cable. I would try unplugging the cable at both ends and then plugging it back in, making sure its not just loose. If that does not help, one of them may be bad. I would replace the LCD and the LCD Cable one at a time until I found the bad one.
Very helpful..thanks mam
Great to hear !! Always here to help :):)
..long story short
Hinge on my laptop broke and punctured this screen/lcd wire. 2 of the (TINIEST I've ever seen) wires are sliced.
Would it be 'safe' to try splicing them?
P.s. you explain things wonderfully. So glad to find you! ☆new subscriber•
No. I wouldnt do that. For the cost of a new LCD cable, I would rather just replaced it
Thanks for the video. From an newer Insignia LCD digital television I removed the LCD, to test it plugged it in again and it worked. Because I’m making a no-backlight LCD, so the screen is more transparent as done on another TH-cam video I peeled off the filter, held it up to the light and I don’t see any screen cracks. I was extremely careful to make sure the LCD cable wires were not damaged. The monitor power indicator goes on but the LCD doesn't show any image when I turn it on now. Do you know what I may have done? May I please know if my TV Insignia LCD is broken since I removed the monitor cable but the thin metal fastener clip housing on the outside of the cable outlet on the LCD bus strip fell off that the monitor cable plug pin-strip plugs into on the LCD bus strip cable outlet?
Is it possible if the television electronic circuit board is screwed back in with other screws from the assembly that fit for some electronic reason something will not work quite right?
GREAT INFO THANK YOU
Thanks !! Glad this video was helpful :):)
It did help me alot. Thanks
Your welcome !! Happy to help :)
Great video! I fix a lot of laptops with minor issues and or just need screens replaced. But i have an odd one that maybe you'd be able to shed some light on. I have a Toshia P55w-B5112, which the screen is black but the touchscreen still works when connected to an external monitor. I checked the RAM, and because this PC doesn't have a separate CMOS battery (it's built into the main battery) i disconnected the main battery and still no love. I checked the connection of the video cable to the motherboard which is good. I haven't checked the connection on the back of the monitor yet, because it looks like its going to be a bear, and before i move forward with that figured i would see what you thought. Any insight you can provide is greatly appreciated...Thanks
The external monitor shows the display fine and the touch screen even worked on it?
@@PC_Monkey I know that sounded a bit confusing. The laptop monitor is black (nothing appears). I connected a external monitor to the laptop and i can see the image perfectly. If i touch the laptop screen the touchscreen works because whatever i select opens or closes on the external monitor. I just dont get anything on the actual laptop screen. Hope that makes sense.
@@Casinoslotguy Sounds like the LCD on the laptop is dead and needs to be replaced. Sounds like motherboard and touch screen is fine. That would leave the LCD itself
@@PC_Monkey I think your right, thanks for the help
@@Casinoslotguy np :) happy to help! Good luck !
You made me fix my laptop. Thanks a lot
Great to hear !! Always here to help :):)
Very informative on every step. On the bottom of my screen there is some blurly blinking, how can i know if its the LDC or cable problem? Thanx in advance.
Try plugging the computer in to an external monitor. The the problem persist there?
@@PC_Monkey never tought about it, thanx bro!
@@PC_Monkey I have the same problem. The problem doesn't persist on an external monitor. Does this mean its the LCD cable or the LCD itself.
@@jimmyakande2905 Ya, if the computer displays to an external monitor but not to its own LCD, your most likely looking at a bad LCD or LCD Cable. I would try 'reseating' the cable at both ends first. If that does not help, replace them one at a time until you find the issue :)
Hello this is a late comment i hope you can reply. My laptop is the hp omen 17 inch so i am having problems with the screen. So the perfect way to explain it is now it's showing as a broken hdmi connected to the tv like the lines and all that. I don't know if it is a wire problem or the lcd screen itself please can you tell me how to differentiate or if I have to open it up. Thank you
Without specialized equipment, its very difficult to tell if its an issue with the LCD Cable or the LCD itself. Most people would simply replace them one at a time to see which one it is. Many sellers on sites like Ebay, Amazon, etc offer free returns for any reason so you can always return the one that you dont need if you get both and only need one
Hey, great video...MY laptop screen works well but ,in intervals....it works perfectly fine for a week, then the next day I turn it on ...it doesn't work...I tried every method possible to fix the issue and I don't feel comfortable to replace it if my screen is working but It rarely works sometimes. Tried unplugging the tape but I feel like I might mess up ....the cable is pretty entact...pls let me know if you any software related or hardware related tips to this problem.thx.
The times when it does not work, have you tried the RAM test or the external monitor test as seen here?
I have tried re attaching the ram .and it does work on an external monitor .
@@PC_Monkey is the issue software related cuz it works perfectly fine on an external monitor but the laptop screen itself seems to be a problem
@@PC_Monkey also when I boot up the computer with an external monitor it boots up with beep sounds but works without any problem
@@jaz1715 If the screen is black, what are the signs the computer is on? Lights? Sounds? Fan?
Good video. When I turn on my computer, some times the screen comes right away, other times too it doesn't. Unless I try to touch where the LCD cable passes before it comes and even that it goes off and on. Is the lcd cable damaged or when could be the problem? Thank you
For a computer that turns on but the display does not work, try this video first; th-cam.com/video/u-REPLdpZ70/w-d-xo.html
Let me know how that goes :)
This was great. Except for the highly anticipated Replace portion. I was just dying to view the missing minute where you show us how to reconnect the 40 pin back to the new screen. I am intimidated by not knowing which orientation to apply pressure from the ribbon cable connector onto the fitting on the laptop screen itself. If I come at it the wrong way will I crush the pins? Top down? Slide it in/on? Otherwise outstanding job on this video.
Hi. Thanks for the clear instructions. However I just dropped my laptop and everything works fine except the screen is dark. I am writing this massage on an external monitor and everything is clear on the external monitor. So do you think it is a screen issue or cable. Mind you the screen has 2 small cracks due to the fall.
Yes, if an external monitor works well, it means there is nothing wrong with the signal coming from the motherboard. Only an issue with either the LCD or the LCD Cable. Try unplugging the cable at both ends and plugging back in. Perhaps its just loose. If thats not it, one or both may be bad. Most likely the LCD if you just dropped it :(
If only I watched this before trying to install a new display... I unfortunately pulled too hard and some wires came out of the connector.
I think I should buy a new display cable right? Or do you reckon the connector can be repaired?
And by any chance, would you happen to know of 3rd party sellers for a display cable for the HP Elitebook 830 G8? HP sells them for £110...
Yes, if you pulled the wires out of the plug in the LCD cable, it most likely needs to be replaced. I usually get my parts on sites like Ebay, Amazon, etc. Would you like help locating one?
Super instruction thanks
Happy to help :) Always here if needed !!
Hi,
Thank You for the guidance.
I have a lenovo IdeaPad Y700
It fell of little bit while taking it out of my cupboard. Not severely.
It was working before this incident perfectly.
Laptop works, it also works on another monitor. Screen looks perfect. So I think the problem is either with LCD cable connection in LCD or motherboard which probably became loose or something might have broken.
Could you guide on checks ? And also give a general idea on expense ?
1. If it only disconnected
2. If there is something broken ( what could it be ? ) And how much it should cost?
Is there any thing else that might be a reason eg some light bulb or anything?
I may not do everything myself as I never opened a laptop before ( am nervous ) but I don't want to get cheated. So want to know a fair cost of repairs in either case. And exact steps so other portions remain untouched.
If its working with an external monitor, then its most likely an LCD or LCD Cable issue. I would try reseating the cable from both ends first. If that does not help, replace them one at a time depending on the cost and ease of replacing each. What size is your computer screen?
Hi, great video. I have a Lenovo Ideapad 330. Every time I adjust the lid, the screen goes black but then comes back on after a lot of re-adjusting. Does this sound most likely to be the LCD cable whether loose or in need of replacing?
Yes. I would assume the cable is loose. Try reseating it from both ends first. If that fails, try replacing it.
Hi, thanks for your video. Can I know where can I buy screen online for my Dell Inspiron 15, 3000 series?
I usually get most of my parts on sites like Ebay, Amazon, etc. If you need help locating one, let me know :)
Thanks for the video, having lcd issue with my Asus TUF FX504GD, the display works on an external monitor and the laptop screen flickers (but no display, I can see backlight). So can you let me know if my lcd is damaged or the cable?
If the computer displays fine to an external monitor but wont to its own LCD then yes, your most likely looking at a bad LCD and / or LCD Cable. I would first try to 'reseat' the cable at both ends. If that does not help, replace them one at a time till you find the one that has the issue
I have a Asus FX503vd. While the computer is running the left side of the screen turns pale almost white and when I touch it from the back it turns good again. I guess the problem is the cable that you mention here and it became somehow loose. But are these cables standard, or do any company has its own type of cable? Thanks for the video!
Is this your cable? www.ebay.com/itm/254819224560?_trkparms=ispr%3D1&hash=item3b5468cbf0:g:xG0AAOSwoZFgGOXb&amdata=enc%3AAQAGAAACoPYe5NmHp%252B2JMhMi7yxGiTJkPrKr5t53CooMSQt2orsSg3Ye8yTWgOW7pmE1t838dlkO454JqL4P7a5YYZ5drGoGLoL4JiISWvWx%252BCjADfhU00vm%252BVISprBiDvzOT%252BTBPtRH5ygioDY3GtpBSXfoRz4X%252FrGccLLeZbqVlLJUcb7r%252FdYkCBMpAAtcV3eTcKuGSYX%252BUemqFxm2lt4CFKuVvlCuGcnISDbb4%252FI0Z8M6S1ll9ajNb0SjtJs9KbCAgviD9jUogv5wR655cM%252FMOdyB89GagbtJyC7dVqU3%252BAF0s7qwP9YgrsANUmi6n10%252FUeQNfj9E%252Fmjz0xWCnKRULxXcqq%252FKB9tngWCQp63J2Qa%252FlTFXX1hMlK%252BoyLGG%252Bsj0diu3THYziXzlHmzfYNTJKm4Ef4wiiPNUrLipb1BP3B3zzkW0W3Cx05fVODvrIl6y0qvT3uzv1KzpzqOPkq3ddkmRiAOlrKHK5vJeX8m9dyZk%252FJyZ8g6w5iDyHKAozx6Yaelr02U55oQ0tUMJWorNsftnS80D0CNmaV7khbvnXtdyCWVtLg1eKfm%252F7No5CQLRDZt7ptQfZj10mo6jxdvrVnHpHkXUGXdDK%252Bacy%252FeFJ82vjIQeNWKIxf%252BT56DcFqANjmfmLosTq3%252BoVHznzlHe2FAGBcAuEGvfvpmyNPyvLvFdnhTbY1Dw4gLhctqyJ19WsEb1Fe8ahvuRm1pavEPzzMuUgSdriAk9liFNcAeI0VrDrJUNMebn90h9GmyqSA3T6MKp1M7DikmTvoITB60sH8uvB6XGfZX%252F7BS7%252FMScJT9Hzt%252BQj1SUDizIfifIf413w8igp9RW%252FfE7AJVELy71XpJMhAzAHfkFlO4JxV0FRFOM2zqwIfWnLfnxY9YKfY%252FafNw3GA%253D%253D%7Cclp%3A2334524%7Ctkp%3ABFBMpLvd-Zdf
Thank you so much sir
Your welcome !! Happy to help :)
Thank you for your extremely helpful video. Please, every time I try remove this plastic bezels, some of the clips break. I do it so soft. I do not understand what I am doing wrong. Could you please give me some advice in order not to have any loss? Thank you!
Its hard to know what exact shape the bezel clips are before you get into it so its hard to put pressure in just the correct spot to avoid breaking at least some clips. I find it helpful to insert the pry tool directly next to the clip when ones location is identified, and push in and up. However, even with a lot of experience and doing it right, some clips may always break.
@@PC_Monkey Thank you for replying my question. Your information and advice is totally helpful !! Keep doing your extremely great videos that help us, inform us. Thank you for your time reading and answering my question !!
@@yiannisserpico2646 Happy to help :) Always here if needed !!
Will this help HP touchscreen laptops? The hinges broke, we replaced them and now we have the black screen but computers runs. Trying to connect with hdmi to another monitor to check too. Thank you for your videos.
Did the screen work well before you replaced the hinges? If so, its possible something is lose or damaged. What was the result of the external monitor test?
@@PC_Monkey the screen worked before the hinges were changed. I think we figured it out with your help. Bless you.
@@Lenyxx3 Glad your all set :):) Always here if needed !!
Thank you for the tutorial! I want to ask tho if my laptop has one green line when the screen is black and the line changed to pink when the screen is white, do I have to replace the LCD or just the cable?
Have you tried hooking the computer up to an external monitor to see if the issue is with the LCD or cable?
@@PC_Monkey I just tried it with HDMI cable and it looks fine in external monitor. What does it mean?
@@Intania123 That means its most likely an issue with your LCD or LCD Cable. Try reconnecting the LCD Cable at both ends to see if its just a lose connection. If that does not correct the issue, replace the Cable and the LCD one at a time until you find the one with the issue
hay my laptop doesn't have such bezels how do I access the LCD cable? It is a "Acer aspire V3"
Hello, thank you so much for your video. I was following you with my Acer CB311-11H Chromebook but you didn't show how to take the LCD Video cable all the way off once it's disconnected. I broke mine while changing my screen. Can you please tell me how to disconnect it and then reconnect the video cable. Thank you so much and have a great day.
You wish to remove the LCD cable from the motherboard as well as from the LCD? If you are just replacing the LCD, there would be no need to unplug the cable from the motherboard.
I had to go through a lot of bad videos to find yours. Well done, and thank you.
Yes: I have a question my (Acer M5-583P) started flickering and white out problems all of a sudden. It happens if I push or pull the lid to adjust the view angle. I got online, and followed some of the suggestions about uninstalling the video drivers, and disabling MS Error Reporting and such. No help there. If I don't move the lid is seems to be OK.
So I pulled the back and checked the LCD cable connection to the MB. It seems fine. No fray on cable. Fits tight on harness.
It must be either shorting in the hinge, or maybe the harness in the LCD is loose?
Do you have any ideas....PS, it has not been dropped or bumped hard that I'm aware of.
Thank you for any help. Wish you well.
Have you managed to find a solution? I have this exact problem too
Thank u for sharing
Happy to help :) Always here if needed !!
Hi.
Great vid.
I have a Fujitsu A544 and had an accident with the screen .I threw a pen at the screen which resulted in half the screen working and the other half not.
Worked through the TV fine with HDMI.
Reseated the LCD cable to the screen and when I turned it on went immediately white..
Now the screen is just blank but still works through the TV and still won't come on.
Was this a power thing?
Would you replace the screen?
Yes, I would replace the screen at this point :)
Thanks.
@@Duppi Good luck !! Let me know how it goes :)
Managed to get it up and running ...Thanx
@@Duppi Glad your all set :):) Always here if needed !!
Thank you for your informative videos. I have a Dell Vostro 1500 and want to replace its LCD 15,4". I have found a LCD 15,4" of a DELL Latitude D820 and wanna buy it. I wonder though if I can replace mine with it? I appreciate your response in advance.
It will mostly depend on the connector in the back. It has to be in the same location as the one on yours and it has to be the same pic count. Usually 30 or 40 pins.
@@PC_Monkey Thank you very much for your response. I have my Dell Vostro 1500 with me and wanna buy "the LCD of Dell Latitude d820" online; is there a way to know if the LCD will match my laptop before buying it? What should I ask the seller exactly (before buying it ) so that I I make sure the LCD will be compatible with my Dell Vostro 1500?
@@AminValipour Is there a rear view of the LCD that your thinking of buying? Look and see where on the back the port is. It should match the location of yours. Also, the listing should say if its a 30 or 40 pin. If not, message the seller and ask.
@@PC_Monkey Thank you very much! I'll consider your comment for buying it
Thankfully To heaven I had the same model: Toshiba Satellite c55-c, the same issue with my lcd cable etc. At last I can say that this model won’t be in my top 10 recommendations.
Nice job....but mine is a Lenovo Enhanced Experience 3 inbuilt Desktop. I'm also experiencing the same black screen problem and have tired the first methods but want to believe it's the LCD cord because it displaying on my flat screen TV but has refused to display on its own screen.
If it works on an external monitor the the problem is most likely with your LCD or your LCD Cable. I would replace the cable first as its a cheaper part :)
I am currently rebuilding a Toshiba Satellite L350D. Can you show how to get to the LCD cable to put a new o ne in please? This surround looks pretty solid.
I found this I hope helps: th-cam.com/video/0pUm58C1YuY/w-d-xo.html
@@PC_Monkey Hi, thank you for finding the video. It has helped with the rebuild.
Very good video. Thank you for your help
Happy to help :) Always here if needed !!
can i replace display cable without thermal tape ? what happens if i don’t use thermal tape? thank 🙏
Does your current cable plug in with the assistance of thermal tape? If so, its best to use it. However, its not absolutely necessary. The computer will still work without it :)
Your videos are super helpful and my laptop in particular has pink screen all over the lcd. Sometimes the lcd is fine upon startup but after a few seconds, it goes back to the pink screen. I had it checked in a local tech shop but its pretty obvious he was emptying my pockets to get it fixed as with other local tech shops near my area. Help? ☹
Have you tried hooking the computer up to an external monitor? Does the problem continue on the external? If not, you most likely need a new LCD. For most computers, you can get a new LCD for around $30 USD and install it yourself.
@@PC_Monkey Hi. Hope you're in good health amidst the pandemic. Anyway, the issue doesnt continue on my tv or other external monitor. A new lcd might be it but Im tossed different infos from local techs. I guess my question now is, do you have any tips where and how to find reliable lcd's? Does it really have to be the same brand? Thanks for answering! Really appreciate it.
@@Giggity03 I usually get most of my computer parts on ebay and sometimes on amazon. No, it does not have to be the same brand. It has to be the same size, for example, most laptops will take a 15.6 inch screen. The back connector pin has to be the same size, either a 30 pin or 40 pin usually and the location of the connector pin has to be in the same place so the LCD cable can connect to it.
@@PC_Monkey Ayt, thanks so much man. Your videos really helps me and my little brother since I also recommend your videos to him. Keep safe man and have a great start of the year!
Thanks fam
Happy to help :) Always here if needed !!
Video #4 "replacing LCD/Cable - is there anyway to test cable - LCD turns on (sometimes) but goes back to gray if change angle hinges - believe it is a damaged cable? ASUS S300C. Have not tried external monitor, but believe it will show good. Is there some testing before opening and guessing?
No real good way to test the cable. Its usually a pretty cheap part so if you have reason to think its been damaged, replace it :)
Fantastic
Happy to help :) Always here if needed !!
My screen has like green lines and when the screen if turned off you can see darker spots on the screen, does changing the lcd cable help with this or do I need to buy a new screen or both? PLS I NEED HELP
Nice thanks
Happy to help :) Always here if needed !!
Very helpful but i want to know where is lcd cable of dell g15 5511.
The LCD Cable usually runs from the LCD to the Motherboard through the left side Hinge Assembly. You can see him unplug it here at 3:19 th-cam.com/video/mfGOQ0PBFRM/w-d-xo.html
Hey man
can you show a guide on how to change the lcd cable in a Lenovo laptop if you can. Specifically a Lenovo Legion Y7000 2019 PGO.
Does this video help? th-cam.com/video/ZFNYMmXyhYU/w-d-xo.html
Followed all your suggestions in videos for black screen,can hear noises (3 clicks but no fan noise) but no display on laptop but will work on an external monitor via HDMI cable. Replaced LCD cable today. Still not working on laptop. Does this mean a new screen? Laptop is 7 yrs old Toshiba Satellite so wouldn't be surprised
Yes. Most likely if your computer displays to an external monitor, then the issue is your LCD or LCD Cable. If replacing the LCD Cable does not help, the next step would be the screen
@@PC_Monkey Thought that would be your answer so ordered new screen this morning. Thanks for confirming my assumption.
@@lynmiddleton2883 Good luck !! Let me know how it goes :)
Can I do this whole thing while my computer is running? I know you said the computer should be off when replacing LCD panels but I'll just be adjusting/checking some loose connections and I want it to be open because there's a certain image when opened makes the whole screen flicker.
Edit: Nvm I seemed to have fix it!!! Thanks!!!!
No, your computer should be off or you could damage the LCD when plugging it in.
@@PC_Monkey I didn't see your reply when I edited my comment but anyways I think I fixed it. Thank you again.
I am experiencing single vertical line on my laptop, I don't know whether the problem is from chip or ribbon cable, or maybe graphic drivers. Could you help me by any chance? Best regards.
Its a month ago, but writing troubleshooting steps anyway because they might be helpful to someone else.
First thing you do is hook up the laptop to a tv or monitor and see if it displays correctly.
That tells you all the hardware is functional, except for the screen.
If it is indeed just the screen, check if gently pushing on the back lid of the screen while tilting the screen has any effect on the type of distortion you're seeing.
If it does, it's almost certainly the connector that just needs reseating.
If it doesn't, try and take out the lcd cable as shown here, and inspect it carefully along the entire length, from end to end. If there's no visual clues, bend it gently on multiple places to see if it has snapped anywhere.
If the cable looks good as well there's two options. First is to order a replacement cable which might either fix the problem or tell you its definitely the lcd panel that's broken. Second is just immediately RMA the laptop or order an entire new screen + cable combo for that laptop.
Or maybe it's finally time for that upgrade you've wanted.