The disassembly was to find the error. I had the customer service of Creality (much better than the K1 as a device) with me. We first had to find out where the problem was coming from. Since the hotend was already disassembled, it's easier that way. So no technical or specific reason.
@ayhanaydin7793 It may be due to 2 things. 1. the belt must be tightened more easily (unfortunately this can only be found out by removing the belts) 2. (much easier to do) remove the cover cap from the extruder. At the top you will find a black plastic cover with 2 screws and springs behind it... these springs press on the linear bearings, loosen these screws. I did not reinstall the right spring, it runs much better now. Good luck and success!
I have the same problem as you but how to solve this problem I have tried to make the straps go looser but can't solve it. could you make a guide or a video or something how to solve this?
Hello Tobias, at my K1 the problem was done with the loosening of the belts. I would really like to help you, but I was able to eliminate the problem. I would not know how to do that, so eliminate a problem that I do not have. Write to the Creality customer service, they are really competent and nice. They have already helped me the 3rd time (new extruder).
Hi, bei mir war es der Riemen zu straff gespannt. Nach dem korrekten Einstellen war das Problem weg. Ein Abonnent hatte geschrieben, bei seinem Gerät musste die Führung der X Achse getauscht werden um die Wellen in Griff zu bekommen.
![ไข้ขึ้นเลย! เมื่อแฝดโดนจัดเต็มวัคซีนครบ2เดือน🤒 [cc] แดนแพทตี้ SS2 | EP.54 |](http://i.ytimg.com/vi/z2VHItnyyvY/mqdefault.jpg)
It looks really good. Why did you not loosen them with the loosening screws they provide?
The disassembly was to find the error. I had the customer service of Creality (much better than the K1 as a device) with me. We first had to find out where the problem was coming from. Since the hotend was already disassembled, it's easier that way. So no technical or specific reason.
What did you do to solve the problem. I have the same issue
@ayhanaydin7793 It may be due to 2 things. 1. the belt must be tightened more easily (unfortunately this can only be found out by removing the belts) 2. (much easier to do) remove the cover cap from the extruder. At the top you will find a black plastic cover with 2 screws and springs behind it... these springs press on the linear bearings, loosen these screws. I did not reinstall the right spring, it runs much better now. Good luck and success!
My English is even worse than my German. What I wanted to tell you... please start with the 2nd , the springs. If that doesn't work, loosen the belt
I have the same problem as you but how to solve this problem I have tried to make the straps go looser but can't solve it. could you make a guide or a video or something how to solve this?
Hello Tobias, at my K1 the problem was done with the loosening of the belts. I would really like to help you, but I was able to eliminate the problem. I would not know how to do that, so eliminate a problem that I do not have. Write to the Creality customer service, they are really competent and nice. They have already helped me the 3rd time (new extruder).
@@mutualgarden Thanks
How did you solve the problem?
Hallo Florian, sagen wir mal zu 80% beseitigt... einer der Riemen war zu fest gespannt.
What did they make you do to fix it? I have horrible ghosting with mine.
seriously, how did you solve the problem?
I retensioned the belts, they were way too tight
Hey :) ist das Video schon fertig mit der Erklärung wie man das Problem am besten behebt ?
Hi, bei mir war es der Riemen zu straff gespannt. Nach dem korrekten Einstellen war das Problem weg. Ein Abonnent hatte geschrieben, bei seinem Gerät musste die Führung der X Achse getauscht werden um die Wellen in Griff zu bekommen.
Danke dann Probiere ich das mal aus :)
And the remaining 20% of what was the problem, my belts are loosely stretched, and the ripples are strong.
I am working on it. Please give me some more time. I am only at 90%.
How did you solve the problem?
I retensioned the belts, they were way too tight