Nice work man. Made one for myself very similiar. There was no way I was going to pay what most of the manifolds go for. Took a bit of time but was fun building my own and getting to learn in the process.
Really good video. Has inspired me to have a go myself rather than just purchasing one for mucho dollars. Had to sub :) Here in Western Australia we get ripped a new one for just about everything, especially stuff like this.
Any tips on copping the 90degrees . I have broken 2 hole saws instantly in the drill press. What kind of hole saw are you using ? Is there another way to do this as the hole saw legit keeps just stopping the drill press instantly
Hey buddy what’s going on ?! Thanks for the video , great job! Man I hate having to fish mouth my small pipes with plasma cutter lol . How long are your 1 1/2 long radius 90’ ? I set mine up and don’t seem to be able to get to my spark plugs .
Good job man. A little advice for your videos... in post production when you're cutting all of your video together, use a function to equalize your audio across the entire video. Some of your cuts are a LOT higher volume than the rest of the video.
Bro I need you to build me a single turbo manifold for my 2011 Silverado 4.8L. I live in Texas and will obviously handle shipping. Can you do this and how can we talk further?
nice stuff, but I'd have to spend a thousand or more to get the equipment you have to do this to save $500. And I don't have the skill set for this. But great video. I suppose I could just free hand the coping.......lol
I admire your enthusiasm and work but can I complain ah little just for the sake of you tube and the diy’ers which I’d argue that’s 98%. Ok, off the soap box you ready? Nearly no one is gonna have a mill. No measurements on anything I know your other videos you said didn’t go through but I got to be honest really learnt nothing here other than this is what you did what you came up with. What I’am I babbling about? Can you baby sit? Show more in depth and be more practical with tools that your garage guru would have.
Nice work man. Made one for myself very similiar. There was no way I was going to pay what most of the manifolds go for. Took a bit of time but was fun building my own and getting to learn in the process.
Best learning video on TH-cam yet...2020
Really good video. Has inspired me to have a go myself rather than just purchasing one for mucho dollars. Had to sub :) Here in Western Australia we get ripped a new one for just about everything, especially stuff like this.
Man. That is sick!!! I would be interested in one for my 2001 silverado. Good work man.
Hey Trevor. First time Viewer. Looking forward to more on LS stuff.
JDE thank you for the follow!! I will definately have more ls stuff in the future!!
Right on Bro.
Chris from family guy makes a log manifold. Lol. Good video I need to get on making mine myself.
Nice work.
Making any more anytime soon? Im interested in purchasing one as well.
you should check out the ones John made on BAD LUCK GARAGE
Looks awesome sir! Loved the video. I may either take this video as my how to. Or just farm it out to you. Either way. Love the project
Awesome video Trevor! Keep it up 👊
Wesley Dyck thank you!!
Trevor , what would you charge for a set of these manifolds ?
Looks awesome man, subbed
sweet nice job
Any tips on copping the 90degrees . I have broken 2 hole saws instantly in the drill press. What kind of hole saw are you using ? Is there another way to do this as the hole saw legit keeps just stopping the drill press instantly
7 people dislike this video??
Great video and nice setup
What size are the ports on the flanges?
Right on brother! Subscribed
mike pierunek thanks!!! I appreciate it !
Hey buddy what’s going on ?! Thanks for the video , great job! Man I hate having to fish mouth my small pipes with plasma cutter lol . How long are your 1 1/2 long radius 90’ ? I set mine up and don’t seem to be able to get to my spark plugs .
Good job man. A little advice for your videos... in post production when you're cutting all of your video together, use a function to equalize your audio across the entire video. Some of your cuts are a LOT higher volume than the rest of the video.
elesjuan thanks I’ll look into that forsure. I noticed it as well after production 👍
Why do you cut off/ cope your inside pieces...why not let them run..what's the advantage or disadvantage ..
Bro I need you to build me a single turbo manifold for my 2011 Silverado 4.8L. I live in Texas and will obviously handle shipping. Can you do this and how can we talk further?
What would you charge to make two of those for twin turbo left and right side
I'm also interested in buying one for myself.. can you make that happen
blk92notch when I make a few here I will let ya know. I don’t have a extra at the moment. Thanks for the kind words!
Tbrad Fab
Did you do any backpurging to eliminate any sugar getting in turbo turbine wheel?
Tommy Life hey. I did not back purge. I just manually clean them out , brushes and air
What would you chatge for one of these bad boys. Would you do the cross over pipe too.
Have you considered 45ing those elbows at the manifold and where the meet the log? Why 2.5 log and not 3"?
Michael Mullner I went with the 2.5 because it’s readily available..
How much for a hot side for a silverado 2000
nice stuff, but I'd have to spend a thousand or more to get the equipment you have to do this to save $500. And I don't have the skill set for this. But great video. I suppose I could just free hand the coping.......lol
Whered you go?
How do we contact you, if you sell them
Would love to buy one from you. Let me know if that’s possible
Dwight Stanford thanks! At this moment I do not have any extra but I’m hoping in the near future to make a few to sell I’ll keep ya posted!
what steel is this
Do u sell them?
If so how much
A motor is what starts the Engine.
Jet motor
Rocket motor
Diesel motor
LS motor?
No one ever shows how to fill the gaps between the manifold outlet and we're the turbo flange meet.
Weld two sides air chisel to shape
Dude...stop saying you ``videoed it``....cause you didn`t video anything...You recorded it digitally and no video tape was used at all...lol
I admire your enthusiasm and work but can I complain ah little just for the sake of you tube and the diy’ers which I’d argue that’s 98%. Ok, off the soap box you ready?
Nearly no one is gonna have a mill. No measurements on anything I know your other videos you said didn’t go through but I got to be honest really learnt nothing here other than this is what you did what you came up with.
What I’am I babbling about? Can you baby sit? Show more in depth and be more practical with tools that your garage guru would have.