I’ve ordered several times from Ryan. Was able to rebuild a MS660 clone completely with his help. Now have all the parts to rebuild a 372 X-Torque. Always good to do business with.
Hello, Tinman! I built my first farmertec saw (ms 660) a few weeks back and it started right up. Felled a pine with it last week that was a tad bigger than the 28 inch bar. Thank you for spreading your knowledge!
Very nice pipe but also very pricey. Half the price of a new saw...ouchey. At those prices they aren't going to be on my saws anytime soon but nice to see and hear...lol. TC Mahalo Tinman 🤙🤙🤙
The craftsmanship in that pipe is top notch! Been doing business with Wolf Creek a long time, always a pleasure. Been seeing a few worn out 500i's lately, my local dealer has completely rebuilt three in the past couple months. The price on them just went up here so folks are paying to fix them vs. buying new. Just a matter of time before you end of with one that needs that piston and some crank bearings.
WOW that is such an awesome fab job on that pipe i have been fabricating autos new and old for 30 plus years and would love to have jobs come out this clean kudows to the fab guy
Wolfcreek is great for ordering parts from!!! The 390 cylinder on the 371/372 chassis isn't so easy, the bolt holes do not line up, iron horse is a hack and slotted them, the 390 piston having a larger wrist pin is the largest issue
would like to give you some numbers for a 371 build I did that runs damn strong. Use a 272 piston which is substantially lighter. You will have to cut the squish band to make it work. Just keep cutting squish out until you get 20-22 thou. Next you have a 101 exhaust roof. Make the shape of the port square and widen it a bit more than stock. Your stock blowdown will be waaay too much. Will need to raise transfers. Make primary 121 and secondary 119. Stock intake should open around 81. By the time you clean it up and shape it, it will open around 82. Some people go more but, 82 worked good for me. Next I did some work to the carb. Use your dremel to thin down material on the bar that holds the butterfly. I run a 28" bar in mainly hardwoods with a hand filed C83 chain. This build really really runs good.
Hyway never used to make a 50mm 372oe pop up. Just ordered one from wolf creek! I have a Hyway pop up piston in a ported 034 super and that thing rips. I prefer the plating on oem cylinders but the Hyway pistons are really nice.
Tinman I do believe all that is is a 394 big bore piston , I have two 390 cylinders I had sent out and had one bored and replated , the other one I had a sleeve pressed in and ported so
I have a 500 i, feel free to forward it to me. Seriously though, I was looking at the website and they had 3 pipes shown with different finishes. And looking at them I could tell that they were NOT built exactly the same. Probably all hand cut pieces I'm guessing is the reason for the differences.
Anyone got any ideas on why my ms311 doesn’t pull fuel ? I f’ed up my saw a few weeks ago, ended up putting a hyway piston/cylinder kit in new coil i do have spark but it’s faint white I get fuel to the carb but nothing in the cylinder could it be I need to rebuild the carb?
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
Wolf creek saw shop is fabulous to do business with , by far the fastest and friendliest option for top end parts usa to sask ❤
I’ve ordered several times from Ryan. Was able to rebuild a MS660 clone completely with his help. Now have all the parts to rebuild a 372 X-Torque. Always good to do business with.
Kudos to the person who did the fabrication and welding on that pipe. WOW!
Wow ... that pipe is something else ! Hat's off to the fab man .
Hello, Tinman! I built my first farmertec saw (ms 660) a few weeks back and it started right up. Felled a pine with it last week that was a tad bigger than the 28 inch bar. Thank you for spreading your knowledge!
Very nice pipe but also very pricey. Half the price of a new saw...ouchey. At those prices they aren't going to be on my saws anytime soon but nice to see and hear...lol. TC Mahalo Tinman 🤙🤙🤙
Beautiful fabrication on that pipe🤩 and that's some great looking Meteor parts!
The craftsmanship in that pipe is top notch! Been doing business with Wolf Creek a long time, always a pleasure. Been seeing a few worn out 500i's lately, my local dealer has completely rebuilt three in the past couple months. The price on them just went up here so folks are paying to fix them vs. buying new. Just a matter of time before you end of with one that needs that piston and some crank bearings.
I have used Wolf Creek because of your recommendation and I have been very impressed!
Well, heck yeah! I have been running marks pipe on my self personal ported 500i for 6 months now 👍
WOW that is such an awesome fab job on that pipe i have been fabricating autos new and old for 30 plus years and would love to have jobs come out this clean kudows to the fab guy
Good to see you tinman got my 562 top end from wolf creek those guys are great❤
Wolfcreek is great for ordering parts from!!! The 390 cylinder on the 371/372 chassis isn't so easy, the bolt holes do not line up, iron horse is a hack and slotted them, the 390 piston having a larger wrist pin is the largest issue
That's a good looking pipe
would like to give you some numbers for a 371 build I did that runs damn strong. Use a 272 piston which is substantially lighter. You will have to cut the squish band to make it work. Just keep cutting squish out until you get 20-22 thou. Next you have a 101 exhaust roof. Make the shape of the port square and widen it a bit more than stock. Your stock blowdown will be waaay too much. Will need to raise transfers. Make primary 121 and secondary 119. Stock intake should open around 81. By the time you clean it up and shape it, it will open around 82. Some people go more but, 82 worked good for me. Next I did some work to the carb. Use your dremel to thin down material on the bar that holds the butterfly. I run a 28" bar in mainly hardwoods with a hand filed C83 chain. This build really really runs good.
Looks like fun sir
Great Tinman content!excited to get porting!
Hyway never used to make a 50mm 372oe pop up. Just ordered one from wolf creek! I have a Hyway pop up piston in a ported 034 super and that thing rips. I prefer the plating on oem cylinders but the Hyway pistons are really nice.
Id like to see it on the 460 for sure. I have a 461 and have been considering building a pipe like the 500 pipe for it
Works out to be just under 92cc mate 😱💪🍻
Tinman I do believe all that is is a 394 big bore piston , I have two 390 cylinders I had sent out and had one bored and replated , the other one I had a sleeve pressed in and ported so
Hay time man I’ve got one send it down here to Seattle and I’ll test it
Sorry to hear about your shop… I’ve had enough things flood here in SE Washington State.
Oh, I hate it when my shop floods
Tinman just gets it done 😂 Yes Ryan is great I have a couple dze unlimited coils for my stihls from him on ebay
I REALLY wish Hyway would make a 394XP stock cylinder, so we can keep using these 394XP saws.
I need one of those kits now, would work great with my series I’m trying to start with a 390 and the mods you can do
👍
I wish that pipe pointed right instead of left.
Didn't iron horse do the 372 / 395 combo for bucking.
I have a 500 i, feel free to forward it to me.
Seriously though, I was looking at the website and they had 3 pipes shown with different finishes. And looking at them I could tell that they were NOT built exactly the same. Probably all hand cut pieces I'm guessing is the reason for the differences.
54mm x 37mm bore x stroke gives 85cc. 57mm bore with 37mm stroke gives 94.4cc
I have meteor piston on my ms500i
Anyone got any ideas on why my ms311 doesn’t pull fuel ? I f’ed up my saw a few weeks ago, ended up putting a hyway piston/cylinder kit in new coil i do have spark but it’s faint white I get fuel to the carb but nothing in the cylinder could it be I need to rebuild the carb?
You collecting a 500i one piece at a time?😂
You've got a pipe and a piston so far.
Instead of putting a “good” ignition coil on a bad saw. Put the “bad” ignition coil on the good saw and see if it runs properly or not.
Running saws aren't something I like to switch oarts on. End up with more not running saws that way
"Hyway" has some good deals for parts thnx Tinman!
That's why property is sososo cheap out were you live just like some of Saskatchewan as well
Just for giggles, see if your new pipe will fit a Husky or a Dolly or a…
I resale hyway part in Canada
give Rayan a coffee will ya
Thanks buddy
Hows the Tinman and family
Where in Ohio were you at ? Will you be going back anytime soon?
Was in Lore city (hope I spelt that right)
@@tinmanssaws thanks
Hay sorry you shop flooded at leas I didn’t ruin you shop and you didn’t have any box’s or expensive stuff on the floor
I still do not have a sticker from you